[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 778032] Re: qemu spinning on serial port writes
From: |
Thomas Huth |
Subject: |
[Qemu-devel] [Bug 778032] Re: qemu spinning on serial port writes |
Date: |
Fri, 05 May 2017 11:39:23 -0000 |
Which version of QEMU have you been using here? Can you still reproduce
this problem with the latest version of QEMU (currently version 2.9)?
** Changed in: qemu
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/778032
Title:
qemu spinning on serial port writes
Status in QEMU:
Incomplete
Bug description:
As originally found at http://www.mail-
archive.com/address@hidden/msg08745.html from 3 years ago!
Basically qemu seizes up in the event that the file descriptor for its
emulated serial port has a full buffer, i.e. write() returns EAGAIN.
For me, this happened when the serial port was being directed through
a UNIX socket, with a default-sized 4KB buffer. Just the normal
output from a Linux kernel boot caused it to seize up, and stop the
main emulation / select loop.
My suggestion is to remove the detection of EAGAIN in qemu-char.c:521,
so that if the buffer is full, KVM discards the byte(s) it was trying
to write. This is a surely better outcome than the process spinning
forever.
I will submit a separate patch to control the buffer sizes when
creating UNIX sockets, which will help allow slow-reading processes to
tune things so that they don't miss any output.
Additionally, in the context of a hosted environment, if the -serial
option is used, this could be a small security issue. An untrusted
user of a guest system, knowing their serial output is going via a
small buffer, could spew output to their /dev/ttyS0 at a rate fast
enough to trigger this bug and eat a CPU core on the host.
To quote David S. Ahern's original bug report (mine was the same, only
with the latest version from git, so line numbers may have changed -
my suggested fix above is accurate though):
I am trying to redirect a guest's boot output through the host's serial
port. Shortly after launching qemu, the main thread is spinning on:
write(9, "0", 1) = -1 EAGAIN (Resource temporarily unavailable)
fd 9 is the serial port, ttyS0.
The backtrace for the thread is:
#0 0x00002ac3433f8c0b in write () from /lib64/libpthread.so.0
#1 0x0000000000475df9 in send_all (fd=9, buf=<value optimized out>,
len1=1) at qemu-char.c:477
#2 0x000000000043a102 in serial_xmit (opaque=<value optimized out>) at
/root/kvm-81/qemu/hw/serial.c:311
#3 0x000000000043a591 in serial_ioport_write (opaque=0x14971790,
addr=<value optimized out>, val=48)
at /root/kvm-81/qemu/hw/serial.c:366
#4 0x00000000410eeedc in ?? ()
#5 0x0000000000129000 in ?? ()
#6 0x0000000014821fa0 in ?? ()
#7 0x0000000000000007 in ?? ()
#8 0x00000000004a54c5 in tlb_set_page_exec (env=0x10ab4,
vaddr=46912496956816, paddr=1, prot=-1, mmu_idx=0, is_softmmu=1)
at /root/kvm-81/qemu/exec.c:388
#9 0x0000000000512f3b in tlb_fill (addr=345446292, is_write=1,
mmu_idx=-1, retaddr=0x0)
at /root/kvm-81/qemu/target-i386/op_helper.c:4690
#10 0x00000000004a6bd2 in __ldb_cmmu (addr=9, mmu_idx=0) at
/root/kvm-81/qemu/softmmu_template.h:135
#11 0x00000000004a879b in cpu_x86_exec (env1=<value optimized out>) at
/root/kvm-81/qemu/cpu-exec.c:628
#12 0x000000000040ba29 in main (argc=12, argv=0x7fff67f7a398) at
/root/kvm-81/qemu/vl.c:3816
send_all() invokes unix_write() which by design is not breaking out on
EAGAIN.
The following command is enough to show the problem:
qemu-system-x86_64 -m 256 -smp 1 -no-kvm \
-drivefile=/dev/cciss/c0d0,if=scsi,cache=off,boot=on \
-vnc :1 -serial /dev/ttyS0
The guest is running RHEL3 with the parameter 'console=ttyS0' added to
grub.conf; the problem appears to be with qemu, so I would expect it to
show with any linux guest. This particular host is running RHEL5.2 with
kvm-81, but I have also seen the problem with Fedora-9 as the host OS.
Yes, the serial port of the server is connected to another system via a
null modem. If I change the serial argument to '-serial udp::4555' and
use 'nc -u -l localhost 4555 > /dev/ttyS0' I see the guest's boot
output show up on the second system as expected. I'd prefer to be able
to use the serial port connection directly without nc as a proxy.
Suggestions?
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/778032/+subscriptions
- [Qemu-devel] [Bug 778032] Re: qemu spinning on serial port writes,
Thomas Huth <=