[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [virtio-dev] Re: [PATCH v18 1/2] virtio-crypto: Add vir
From: |
Halil Pasic |
Subject: |
Re: [Qemu-devel] [virtio-dev] Re: [PATCH v18 1/2] virtio-crypto: Add virtio crypto device specification |
Date: |
Mon, 15 May 2017 19:02:31 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.8.0 |
On 05/10/2017 08:02 PM, Halil Pasic wrote:
>
>
> On 04/22/2017 08:23 AM, Gonglei wrote:
>> The virtio crypto device is a virtual crypto device (ie. hardware
>> crypto accelerator card). Currently, the virtio crypto device provides
>> the following crypto services: CIPHER, MAC, HASH, and AEAD.
>>
>> In this patch, CIPHER, MAC, HASH, AEAD services are introduced.
>>
>> VIRTIO-153
>>
>> Signed-off-by: Gonglei <address@hidden>
>> CC: Michael S. Tsirkin <address@hidden>
>> CC: Cornelia Huck <address@hidden>
>> CC: Stefan Hajnoczi <address@hidden>
>> CC: Lingli Deng <address@hidden>
>> CC: Jani Kokkonen <address@hidden>
>> CC: Ola Liljedahl <address@hidden>
>> CC: Varun Sethi <address@hidden>
>> CC: Zeng Xin <address@hidden>
>> CC: Keating Brian <address@hidden>
>> CC: Ma Liang J <address@hidden>
>> CC: Griffin John <address@hidden>
>> CC: Mihai Claudiu Caraman <address@hidden>
>> CC: Halil Pasic <address@hidden>
>> ---
>> acknowledgements.tex | 2 +
>> content.tex | 2 +
>> virtio-crypto.tex | 1309
>> ++++++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 1313 insertions(+)
>> create mode 100644 virtio-crypto.tex
>>
>> diff --git a/acknowledgements.tex b/acknowledgements.tex
>> index 53942b0..43b8a9b 100644
>> --- a/acknowledgements.tex
>> +++ b/acknowledgements.tex
>> @@ -26,6 +26,7 @@ Sasha Levin, Oracle \newline
>> Sergey Tverdyshev, Thales e-Security \newline
>> Stefan Hajnoczi, Red Hat \newline
>> Tom Lyon, Samya Systems, Inc. \newline
>> +Lei Gong, Huawei \newline
>> \end{oasistitlesection}
>>
>> The following non-members have provided valuable feedback on this
>> @@ -44,4 +45,5 @@ Patrick Durusau, Technical Advisory Board, OASIS \newline
>> Thomas Huth, Red Hat \newline
>> Yan Vugenfirer, Red Hat / Daynix \newline
>> Kevin Lo, MSI \newline
>> +Halil Pasic, IBM \newline
>> \end{oasistitlesection}
>> diff --git a/content.tex b/content.tex
>> index 4b45678..ab75f78 100644
>> --- a/content.tex
>> +++ b/content.tex
>> @@ -5750,6 +5750,8 @@ descriptor for the \field{sense_len}, \field{residual},
>> \field{status_qualifier}, \field{status}, \field{response} and
>> \field{sense} fields.
>>
>> +\input{virtio-crypto.tex}
>> +
>> \chapter{Reserved Feature Bits}\label{sec:Reserved Feature Bits}
>>
>> Currently there are three device-independent feature bits defined:
>> diff --git a/virtio-crypto.tex b/virtio-crypto.tex
>> new file mode 100644
>> index 0000000..2708023
>> --- /dev/null
>> +++ b/virtio-crypto.tex
>> @@ -0,0 +1,1309 @@
>> +\section{Crypto Device}\label{sec:Device Types / Crypto Device}
>> +
>> +The virtio crypto device is a virtual cryptography device as well as a kind
>> of
>> +virtual hardware accelerator for virtual machines. The encryption and
>> +decryption requests are placed in any of the data queues and are ultimately
>> handled by the
>> +backend crypto accelerators. The second kind of queue is the control queue
>> used to create
>> +or destroy sessions for symmetric algorithms and will control some advanced
>> +features in the future. The virtio crypto device provides the following
>> crypto
>> +services: CIPHER, MAC, HASH, and AEAD.
>> +
>> +
>> +\subsection{Device ID}\label{sec:Device Types / Crypto Device / Device ID}
>> +
>> +20
>> +
>> +\subsection{Virtqueues}\label{sec:Device Types / Crypto Device / Virtqueues}
>> +
>> +\begin{description}
>> +\item[0] dataq1
>> +\item[\ldots]
>> +\item[N-1] dataqN
>> +\item[N] controlq
>> +\end{description}
>> +
>> +N is set by \field{max_dataqueues}.
>> +
>> +\subsection{Feature bits}\label{sec:Device Types / Crypto Device / Feature
>> bits}
>> +
>> +VIRTIO_CRYPTO_F_STATELESS_MODE (0) stateless mode is available.
>> +VIRTIO_CRYPTO_F_CIPHER_STATELESS_MODE (1) stateless mode is available for
>> CIPHER service.
>> +VIRTIO_CRYPTO_F_HASH_STATELESS_MODE (2) stateless mode is available for
>> HASH service.
>> +VIRTIO_CRYPTO_F_MAC_STATELESS_MODE (3) stateless mode is available for MAC
>> service.
>> +VIRTIO_CRYPTO_F_AEAD_STATELESS_MODE (4) stateless mode is available for
>> AEAD service.
>> +
>> +\subsubsection{Feature bit requirements}\label{sec:Device Types / Crypto
>> Device / Feature bits}
>> +
>> +Some crypto feature bits require other crypto feature bits
>> +(see \ref{drivernormative:Basic Facilities of a Virtio Device / Feature
>> Bits}):
>> +
>> +\begin{description}
>> +\item[VIRTIO_CRYPTO_F_CIPHER_STATELESS_MODE] Requires
>> VIRTIO_CRYPTO_F_STATELESS_MODE.
>> +\item[VIRTIO_CRYPTO_F_HASH_STATELESS_MODE] Requires
>> VIRTIO_CRYPTO_F_STATELESS_MODE.
>> +\item[VIRTIO_CRYPTO_F_MAC_STATELESS_MODE] Requires
>> VIRTIO_CRYPTO_F_STATELESS_MODE.
>> +\item[VIRTIO_CRYPTO_F_AEAD_STATELESS_MODE] Requires
>> VIRTIO_CRYPTO_F_STATELESS_MODE.
>> +\end{description}
>> +
>> +\subsection{Supported crypto services}\label{sec:Device Types / Crypto
>> Device / Supported crypto services}
>> +
>> +The virtio crypto device provides the following crypto services: CIPHER,
>> MAC, HASH, and AEAD.
>> +
>> +\begin{lstlisting}
>> +/* CIPHER service */
>> +#define VIRTIO_CRYPTO_SERVICE_CIPHER 0
>> +/* HASH service */
>> +#define VIRTIO_CRYPTO_SERVICE_HASH 1
>> +/* MAC (Message Authentication Codes) service */
>> +#define VIRTIO_CRYPTO_SERVICE_MAC 2
>> +/* AEAD (Authenticated Encryption with Associated Data) service */
>> +#define VIRTIO_CRYPTO_SERVICE_AEAD 3
>> +\end{lstlisting}
>> +
>> +The above constants are bit numbers, which tell the driver which crypto
>> services
>> +are supported by the device, see \ref{sec:Device Types / Crypto Device /
>> Device configuration layout}.
>> +
>> +\subsubsection{CIPHER services}\label{sec:Device Types / Crypto Device /
>> Supported crypto services / CIPHER services}
>> +
>> +The following CIPHER algorithms are defined:
>> +
>> +\begin{lstlisting}
>> +#define VIRTIO_CRYPTO_NO_CIPHER 0
>> +#define VIRTIO_CRYPTO_CIPHER_ARC4 1
>> +#define VIRTIO_CRYPTO_CIPHER_AES_ECB 2
>> +#define VIRTIO_CRYPTO_CIPHER_AES_CBC 3
>> +#define VIRTIO_CRYPTO_CIPHER_AES_CTR 4
>> +#define VIRTIO_CRYPTO_CIPHER_DES_ECB 5
>> +#define VIRTIO_CRYPTO_CIPHER_DES_CBC 6
>> +#define VIRTIO_CRYPTO_CIPHER_3DES_ECB 7
>> +#define VIRTIO_CRYPTO_CIPHER_3DES_CBC 8
>> +#define VIRTIO_CRYPTO_CIPHER_3DES_CTR 9
>> +#define VIRTIO_CRYPTO_CIPHER_KASUMI_F8 10
>> +#define VIRTIO_CRYPTO_CIPHER_SNOW3G_UEA2 11
>> +#define VIRTIO_CRYPTO_CIPHER_AES_F8 12
>> +#define VIRTIO_CRYPTO_CIPHER_AES_XTS 13
>> +#define VIRTIO_CRYPTO_CIPHER_ZUC_EEA3 14
>> +\end{lstlisting}
>> +
>> +The above constants have two usages:
>> +\begin{enumerate}
>> +\item As bit numbers, used to tell the driver which CIPHER algorithms
>> +are supported by the device, see \ref{sec:Device Types / Crypto Device /
>> Device configuration layout}.
>> +\item As values, used to tell the device which CIPHER algorithm
>> +a crypto request from the driver requires, see \ref{sec:Device Types /
>> Crypto Device / Device Operation / Control Virtqueue / Session operation}.
>> +\end{enumerate}
>> +
>> +\subsubsection{HASH services}\label{sec:Device Types / Crypto Device /
>> Supported crypto services / HASH services}
>> +
>> +The following HASH algorithms are defined:
>> +
>> +\begin{lstlisting}
>> +#define VIRTIO_CRYPTO_NO_HASH 0
>> +#define VIRTIO_CRYPTO_HASH_MD5 1
>> +#define VIRTIO_CRYPTO_HASH_SHA1 2
>> +#define VIRTIO_CRYPTO_HASH_SHA_224 3
>> +#define VIRTIO_CRYPTO_HASH_SHA_256 4
>> +#define VIRTIO_CRYPTO_HASH_SHA_384 5
>> +#define VIRTIO_CRYPTO_HASH_SHA_512 6
>> +#define VIRTIO_CRYPTO_HASH_SHA3_224 7
>> +#define VIRTIO_CRYPTO_HASH_SHA3_256 8
>> +#define VIRTIO_CRYPTO_HASH_SHA3_384 9
>> +#define VIRTIO_CRYPTO_HASH_SHA3_512 10
>> +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE128 11
>> +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE256 12
>> +\end{lstlisting}
>> +
>> +The above constants have two usages:
>> +\begin{enumerate}
>> +\item As bit numbers, used to tell the driver which HASH algorithms
>> +are supported by the device, see \ref{sec:Device Types / Crypto Device /
>> Device configuration layout}.
>> +\item As values, used to tell the device which HASH algorithm
>> +a crypto request from the driver requires, see \ref{sec:Device Types /
>> Crypto Device / Device Operation / Control Virtqueue / Session operation}.
>> +\end{enumerate}
>> +
>> +\subsubsection{MAC services}\label{sec:Device Types / Crypto Device /
>> Supported crypto services / MAC services}
>> +
>> +The following MAC algorithms are defined:
>> +
>> +\begin{lstlisting}
>> +#define VIRTIO_CRYPTO_NO_MAC 0
>> +#define VIRTIO_CRYPTO_MAC_HMAC_MD5 1
>> +#define VIRTIO_CRYPTO_MAC_HMAC_SHA1 2
>> +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_224 3
>> +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_256 4
>> +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_384 5
>> +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_512 6
>> +#define VIRTIO_CRYPTO_MAC_CMAC_3DES 25
>> +#define VIRTIO_CRYPTO_MAC_CMAC_AES 26
>> +#define VIRTIO_CRYPTO_MAC_KASUMI_F9 27
>> +#define VIRTIO_CRYPTO_MAC_SNOW3G_UIA2 28
>> +#define VIRTIO_CRYPTO_MAC_GMAC_AES 41
>> +#define VIRTIO_CRYPTO_MAC_GMAC_TWOFISH 42
>> +#define VIRTIO_CRYPTO_MAC_CBCMAC_AES 49
>> +#define VIRTIO_CRYPTO_MAC_CBCMAC_KASUMI_F9 50
>> +#define VIRTIO_CRYPTO_MAC_XCBC_AES 53
>> +#define VIRTIO_CRYPTO_MAC_ZUC_EIA3 54
>> +\end{lstlisting}
>> +
>> +The above constants have two usages:
>> +\begin{enumerate}
>> +\item As bit numbers, used to tell the driver which MAC algorithms
>> +are supported by the device, see \ref{sec:Device Types / Crypto Device /
>> Device configuration layout}.
>> +\item As values, used to tell the device which MAC algorithm
>> +a crypto request from the driver requires, see \ref{sec:Device Types /
>> Crypto Device / Device Operation / Control Virtqueue / Session operation}.
>> +\end{enumerate}
>> +
>> +\subsubsection{AEAD services}\label{sec:Device Types / Crypto Device /
>> Supported crypto services / AEAD services}
>> +
>> +The following AEAD algorithms are defined:
>> +
>> +\begin{lstlisting}
>> +#define VIRTIO_CRYPTO_NO_AEAD 0
>> +#define VIRTIO_CRYPTO_AEAD_GCM 1
>> +#define VIRTIO_CRYPTO_AEAD_CCM 2
>> +#define VIRTIO_CRYPTO_AEAD_CHACHA20_POLY1305 3
>> +\end{lstlisting}
>> +
>> +The above constants have two usages:
>> +\begin{enumerate}
>> +\item As bit numbers, used to tell the driver which AEAD algorithms
>> +are supported by the device, see \ref{sec:Device Types / Crypto Device /
>> Device configuration layout}.
>> +\item As values, used to tell the device what AEAD algorithm
>> +a crypto request from the driver requires, see \ref{sec:Device Types /
>> Crypto Device / Device Operation / Control Virtqueue / Session operation}.
>> +\end{enumerate}
>> +
>> +\subsection{Device configuration layout}\label{sec:Device Types / Crypto
>> Device / Device configuration layout}
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_config {
>> + le32 status;
>> + le32 max_dataqueues;
>> + le32 crypto_services;
>> + /* Detailed algorithms mask */
>> + le32 cipher_algo_l;
>> + le32 cipher_algo_h;
>> + le32 hash_algo;
>> + le32 mac_algo_l;
>> + le32 mac_algo_h;
>> + le32 aead_algo;
>> + /* Maximum length of cipher key in bytes */
>> + le32 max_cipher_key_len;
>> + /* Maximum length of authenticated key in bytes */
>> + le32 max_auth_key_len;
>> + le32 reserved;
>> + /* Maximum size of each crypto request's content in bytes */
>> + le64 max_size;
>> +};
>> +\end{lstlisting}
>> +
>> +\begin{description}
>> +\item[\field{status}] is used to show whether the device is ready to work
>> or not, it can be either zero or have one or more flags
>> + Only one read-only bit (for the driver) is currently defined for the
>> \field{status} field: VIRTIO_CRYPTO_S_HW_READY:
>> +\begin{lstlisting}
>> +#define VIRTIO_CRYPTO_S_HW_READY (1 << 0)
>> +\end{lstlisting}
>> +
>> +\item[\field{max_dataqueues}] is the maximum number of data virtqueues
>> exposed by
>> + the device. The driver MAY use only one data queue,
>> + or it can use more to achieve better performance.
>> +
>> +\item[\field{crypto_services}] is a 32-bit mask which indicates the crypto
>> services supported by
>> + the device, see \ref{sec:Device Types / Crypto Device / Supported
>> crypto services}.
>> +
>> +\item[\field{cipher_algo_l}] is the low 32-bit mask which indicates the
>> CIPHER algorithms supported by
>> + the device, see \ref{sec:Device Types / Crypto Device / Supported
>> crypto services / CIPHER services}.
>> +
>> +\item[\field{cipher_algo_h}] is the high 32-bit mask which indicates the
>> CIPHER algorithms supported by
>> + the device, see \ref{sec:Device Types / Crypto Device / Supported
>> crypto services / CIPHER services}.
>> +
>> +\item[\field{hash_algo}] is a 32-bit mask which indicates the HASH
>> algorithms supported by
>> + the device, see \ref{sec:Device Types / Crypto Device / Supported
>> crypto services / HASH services}.
>> +
>> +\item[\field{mac_algo_l}] is the low 32-bit mask which indicates the MAC
>> algorithms supported by
>> + the device, see \ref{sec:Device Types / Crypto Device / Supported
>> crypto services / MAC services}.
>> +
>> +\item[\field{mac_algo_h}] is the high 32-bit mask which indicates the MAC
>> algorithms supported by
>> + the device, see \ref{sec:Device Types / Crypto Device / Supported
>> crypto services / MAC services}.
>> +
>> +\item[\field{aead_algo}] is a 32-bit mask which indicates the AEAD
>> algorithms supported by
>> + the device, see \ref{sec:Device Types / Crypto Device / Supported
>> crypto services / AEAD services}.
>> +
>> +\item[\field{max_cipher_key_len}] is the maximum length of cipher key
>> supported by the device.
>> +
>> +\item[\field{max_auth_key_len}] is the maximum length of authenticated key
>> supported by the device.
>> +
>> +\item[\field{reserved}] is reserved for future use.
>> +
>> +\item[\field{max_size}] is the maximum size of each crypto request's
>> content supported by the device
>> +\end{description}
>> +
>> +\begin{note}
>> +Unless explicitly stated otherwise all lengths and sizes are in bytes.
>> +\end{note}
>> +
>> +\devicenormative{\subsubsection}{Device configuration layout}{Device Types
>> / Crypto Device / Device configuration layout}
>> +
>> +\begin{itemize*}
>> +\item The device MUST set \field{max_dataqueues} to between 1 and 65535
>> inclusive.
>> +\item The device MUST set \field{status} based on the status of the backend
>> crypto accelerator.
>> +\item The device MUST accept and handle requests after \field{status} is
>> set to VIRTIO_CRYPTO_S_HW_READY.
>> +\item The device MUST set \field{crypto_services} based on the crypto
>> services the device offers.
>> +\item The device MUST set detailed algorithms masks based on the
>> \field{crypto_services} field.
>> +\item The device MUST set \field{max_size} to show the maximum size of
>> crypto request the device supports.
>> +\item The device MUST set \field{max_cipher_key_len} to show the maximum
>> length of cipher key if the device supports CIPHER service.
>> +\item The device MUST set \field{max_auth_key_len} to show the maximum
>> length of authenticated key if the device supports MAC service.
>> +\end{itemize*}
>> +
>> +\drivernormative{\subsubsection}{Device configuration layout}{Device Types
>> / Crypto Device / Device configuration layout}
>> +
>> +\begin{itemize*}
>> +\item The driver MUST read the ready \field{status} from the bottom bit of
>> status to check whether the backend crypto accelerator
>> + is ready or not, and the driver MUST reread it after device reset.
>> +\item The driver MUST NOT transmit any requests to the device if the ready
>> \field{status} is not set.
>> +\item The driver MUST read \field{max_dataqueues} field to discover the
>> number of data queues the device supports.
>> +\item The driver MUST read \field{crypto_services} field to discover which
>> services the device is able to offer.
>> +\item The driver MUST read the detailed algorithms fields based on
>> \field{crypto_services} field.
>> +\item The driver SHOULD read \field{max_size} to discover the maximum size
>> of crypto request the device supports.
>> +\item The driver SHOULD read \field{max_cipher_key_len} to discover the
>> maximum length of cipher key the device supports.
>> +\item The driver SHOULD read \field{max_auth_key_len} to discover the
>> maximum length of authenticated key the device supports.
>> +\end{itemize*}
>> +
>> +\subsection{Device Initialization}\label{sec:Device Types / Crypto Device /
>> Device Initialization}
>> +
>> +\drivernormative{\subsubsection}{Device Initialization}{Device Types /
>> Crypto Device / Device Initialization}
>> +
>> +\begin{itemize*}
>> +\item The driver MUST identify and initialize all virtqueues.
>> +\item The driver MUST read the supported crypto services from bits of
>> \field{crypto_services}.
>> +\item The driver MUST read the supported algorithms based on
>> \field{crypto_services} field.
>> +\end{itemize*}
>> +
>> +\subsection{Device Operation}\label{sec:Device Types / Crypto Device /
>> Device Operation}
>> +
>> +Requests can be transmitted by placing them in the controlq or dataq.
>> +Requests consist of a queue-type specific header specifying among
>> +others the operation, and an operation specific payload.
>> +The payload is generally composed of operation parameters, output data, and
>> input data.
>> +Operation parameters are algorithm-specific parameters, output data is the
>> +data that should be utilized in operations, and input data is equal to
>> +"operation result + result data".
>> +
>> +The device can support both session mode (See \ref{sec:Device Types /
>> Crypto Device / Device Operation / Control Virtqueue / Session operation})
>> and stateless mode.
>> +If VIRTIO_CRYPTO_F_CIPHER_STATELESS_MODE is negotiated, the driver can use
>> stateless mode for CIPHER service, otherwise it can only use session mode.
>> +
>> +The header for controlq is as follows:
>> +
>> +\begin{lstlisting}
>> +#define VIRTIO_CRYPTO_OPCODE(service, op) (((service) << 8) | (op))
>> +
>> +struct virtio_crypto_ctrl_header {
>> +#define VIRTIO_CRYPTO_CIPHER_CREATE_SESSION \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x02)
>> +#define VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x03)
>> +#define VIRTIO_CRYPTO_HASH_CREATE_SESSION \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x02)
>> +#define VIRTIO_CRYPTO_HASH_DESTROY_SESSION \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x03)
>> +#define VIRTIO_CRYPTO_MAC_CREATE_SESSION \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x02)
>> +#define VIRTIO_CRYPTO_MAC_DESTROY_SESSION \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x03)
>> +#define VIRTIO_CRYPTO_AEAD_CREATE_SESSION \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x02)
>> +#define VIRTIO_CRYPTO_AEAD_DESTROY_SESSION \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x03)
>> + le32 opcode;
>> + /* algo should be service-specific algorithms */
>> + le32 algo;
>> + le32 flag;
>> + /* data virtqueue id */
>> + le32 queue_id;
>> +};
>> +\end{lstlisting}
>> +
>> +The header for dataq is as follows:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_op_header {
>> +#define VIRTIO_CRYPTO_CIPHER_ENCRYPT \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x00)
>> +#define VIRTIO_CRYPTO_CIPHER_DECRYPT \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x01)
>> +#define VIRTIO_CRYPTO_HASH \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x00)
>> +#define VIRTIO_CRYPTO_MAC \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x00)
>> +#define VIRTIO_CRYPTO_AEAD_ENCRYPT \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x00)
>> +#define VIRTIO_CRYPTO_AEAD_DECRYPT \
>> + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x01)
>> + le32 opcode;
>> + /* algo should be service-specific algorithms */
>> + le32 algo;
>> + le64 session_id;
>> +#define VIRTIO_CRYPTO_FLAG_STATE_MODE 1
>> +#define VIRTIO_CRYPTO_FLAG_STATELESS_MODE 2
>> + /* control flag to control the request */
>> + le32 flag;
>> + le32 padding;
>> +};
>> +\end{lstlisting}
>> +
>
> START HERE
>
>> +The device can set the operation status as follows: VIRTIO_CRYPTO_OK:
>> success;
>> +VIRTIO_CRYPTO_ERR: failure or device error; VIRTIO_CRYPTO_NOTSUPP: not
>> supported;
>> +VIRTIO_CRYPTO_INVSESS: invalid session ID when executing crypto operations.
>
> You describe everything but BADMSG. Could you be a bit more specific
> about the differences between _ERR _BADMSG and _NOTSUPP? Is for instance
> trying
> to do something with a not-advertised service or algo a _NOTSUPP or a
> _BADMSG or just a generic _ERR? Same qestion goes for different sorts of
> out of resources.
>
>> +
>> +\begin{lstlisting}
>> +enum VIRTIO_CRYPTO_STATUS {
>> + VIRTIO_CRYPTO_OK = 0,
>> + VIRTIO_CRYPTO_ERR = 1,
>> + VIRTIO_CRYPTO_BADMSG = 2,
>> + VIRTIO_CRYPTO_NOTSUPP = 3,
>> + VIRTIO_CRYPTO_INVSESS = 4,
>> + VIRTIO_CRYPTO_MAX
>> +};
>> +\end{lstlisting}
>> +
>
> There are no more mentions of the values in the spec, so the description
> above should be real good.
>
>> +\subsubsection{Control Virtqueue}\label{sec:Device Types / Crypto Device /
>> Device Operation / Control Virtqueue}
>> +
>> +The driver uses the control virtqueue to send control commands to the
>> +device, such as session operations (See \ref{sec:Device Types / Crypto
>> Device / Device Operation / Control Virtqueue / Session operation}).
>> +
>> +Controlq requests are as follows:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_op_ctrl_req {
>> + struct virtio_crypto_ctrl_header header;
>> +
>> + union {
>> + struct virtio_crypto_sym_create_session_req sym_create_session;
>> + struct virtio_crypto_hash_create_session_req hash_create_session;
>> + struct virtio_crypto_mac_create_session_req mac_create_session;
>> + struct virtio_crypto_aead_create_session_req aead_create_session;
>> + struct virtio_crypto_destroy_session_req destroy_session;
>> + } u;
>> +};
>> +\end{lstlisting}
>> +
>> +struct virtio_crypto_op_ctrl_req is the only allowed control request.
>> +The header is the general header, and the union is of the
>> algorithm-specific type,
>> +which is set by the driver. All the properties in the union are shown as
>> follows.
>> +
>> +\paragraph{Session operation}\label{sec:Device Types / Crypto Device /
>> Device Operation / Control Virtqueue / Session operation}
>> +
>> +The symmetric algorithms involve the concept of sessions. A session is a
>> +handle which describes the cryptographic parameters to be applied to
>> +a number of buffers.
>
> 8<
>> The data within a session handle includes:
>> +
>> +\begin{enumerate}
>> +\item The operation (CIPHER, HASH/MAC or both, and if both, the order in
>> + which the algorithms should be applied).
>> +\item The CIPHER set data, including the CIPHER algorithm and mode,
>> + the key and its length, and the direction (encryption or decryption).
>> +\item The HASH/MAC set data, including the HASH algorithm or MAC algorithm,
>> + and hash result length (to allow for truncation).
>> +\begin{itemize*}
>> +\item Authenticated mode can refer to MAC, which requires that the key and
>> + its length are also specified.
>> +\item For nested mode, the inner and outer prefix data and length are
>> specified,
>> + as well as the outer HASH algorithm.
>> +\end{itemize*}
>> +\end{enumerate}
>> +
>> 8
>
> This part is slightly confusing for me. I guess you are trying to describe
> what data can live in the session context (considering all the different
> applications). I think we do not have to describe that here, because we have
> to describe the individual session operations, and there we must describe
> the precise impact of these operations (and their parameters).
>
>> +The following structure stores the result of session creation set by the
>> device:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_session_input {
>> + /* Device-writable part */
>> + le64 session_id;
>> + le32 status;
>> + le32 padding;
>> +};
>> +\end{lstlisting}
>> +
>> +A request to destroy a session includes the following information:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_destroy_session_req {
>> + /* Device-readable part */
>> + le64 session_id;
>> + /* Device-writable part */
>> + le32 status;
>> + le32 padding;
>> +};
>> +\end{lstlisting}
>> +
>> +\subparagraph{Session operation: HASH session}\label{sec:Device Types /
>> Crypto Device / Device
>> +Operation / Control Virtqueue / Session operation / Session operation: HASH
>> session}
>> +
>> +HASH session requests are as follows:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_hash_session_para {
>> + /* See VIRTIO_CRYPTO_HASH_* above */
>> + le32 algo;
>> + /* hash result length */
>> + le32 hash_result_len;
>> +};
>> +struct virtio_crypto_hash_create_session_req {
>> + /* Device-readable part */
>> + struct virtio_crypto_hash_session_para para;
>> + /* Device-writable part */
>> + struct virtio_crypto_session_input input;
>> +};
>> +\end{lstlisting}
>> +
>> +\subparagraph{Session operation: MAC session}\label{sec:Device Types /
>> Crypto Device / Device
>> +Operation / Control Virtqueue / Session operation / Session operation: MAC
>> session}
>> +
>> +MAC session requests are as follows:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_mac_session_para {
>> + /* See VIRTIO_CRYPTO_MAC_* above */
>> + le32 algo;
>> + /* hash result length */
>> + le32 hash_result_len;
>> + /* length of authenticated key */
>> + le32 auth_key_len;
>> + le32 padding;
>> +};
>> +
>> +struct virtio_crypto_mac_create_session_req {
>> + /* Device-readable part */
>> + struct virtio_crypto_mac_session_para para;
>> + /* The authenticated key */
>> + u8 auth_key[auth_key_len];
>> +
>> + /* Device-writable part */
>> + struct virtio_crypto_session_input input;
>> +};
>> +\end{lstlisting}
>> +
>> +\subparagraph{Session operation: Symmetric algorithms
>> session}\label{sec:Device Types / Crypto Device / Device
>> +Operation / Control Virtqueue / Session operation / Session operation:
>> Symmetric algorithms session}
>> +
>> +The request of symmetric session includes two parts, CIPHER algorithms and
>> chain
>> +algorithms (chaining CIPHER and HASH/MAC).
>> +
>> +CIPHER session requests are as follows:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_cipher_session_para {
>> + /* See VIRTIO_CRYPTO_CIPHER* above */
>> + le32 algo;
>> + /* length of key */
>> + le32 keylen;
>> +#define VIRTIO_CRYPTO_OP_ENCRYPT 1
>> +#define VIRTIO_CRYPTO_OP_DECRYPT 2
>> + /* encryption or decryption */
>> + le32 op;
>> + le32 padding;
>> +};
>> +
>> +struct virtio_crypto_cipher_session_req {
>> + /* Device-readable part */
>> + struct virtio_crypto_cipher_session_para para;
>> + /* The cipher key */
>> + u8 cipher_key[keylen];
>> +
>> + /* Device-writable part */
>> + struct virtio_crypto_session_input input;
>> +};
>> +\end{lstlisting}
>> +
>> +Algorithm chaining requests are as follows:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_alg_chain_session_para {
>> +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER 1
>> +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH 2
>> + le32 alg_chain_order;
>> +/* Plain hash */
>> +#define VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN 1
>> +/* Authenticated hash (mac) */
>> +#define VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH 2
>> +/* Nested hash */
>> +#define VIRTIO_CRYPTO_SYM_HASH_MODE_NESTED 3
>> + le32 hash_mode;
>> + struct virtio_crypto_cipher_session_para cipher_param;
>> + union {
>> + struct virtio_crypto_hash_session_para hash_param;
>> + struct virtio_crypto_mac_session_para mac_param;
>> + } u;
>> + /* length of the additional authenticated data (AAD) in bytes */
>> + le32 aad_len;
>> + le32 padding;
>> +};
>> +
>> +struct virtio_crypto_alg_chain_session_req {
>> + /* Device-readable part */
>> + struct virtio_crypto_alg_chain_session_para para;
>> + /* The cipher key */
>> + u8 cipher_key[keylen];
>> + /* The authenticated key */
>> + u8 auth_key[auth_key_len];
>> +
>> + /* Device-writable part */
>> + struct virtio_crypto_session_input input;
>> +};
>> +\end{lstlisting}
>> +
>> +Symmetric algorithm requests are as follows:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_sym_create_session_req {
>> + union {
>> + struct virtio_crypto_cipher_session_req cipher;
>> + struct virtio_crypto_alg_chain_session_req chain;
>> + } u;
>> +
>> + /* Device-readable part */
>> +
>> +/* No operation */
>> +#define VIRTIO_CRYPTO_SYM_OP_NONE 0
>> +/* Cipher only operation on the data */
>> +#define VIRTIO_CRYPTO_SYM_OP_CIPHER 1
>> +/* Chain any cipher with any hash or mac operation. The order
>> + depends on the value of alg_chain_order param */
>> +#define VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING 2
>> + le32 op_type;
>> + le32 padding;
>> +};
>> +\end{lstlisting}
>> +
>> +The driver can set the \field{op_type} field in struct
>> virtio_crypto_sym_create_session_req as follows: VIRTIO_CRYPTO_SYM_OP_NONE:
>> no operation;
>> +VIRTIO_CRYPTO_SYM_OP_CIPHER: Cipher only operation on the data;
>> VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING: Chain any cipher with any hash or
>> mac operation.
>> +
>> +\subparagraph{Session operation: AEAD session}\label{sec:Device Types /
>> Crypto Device / Device
>> +Operation / Control Virtqueue / Session operation / Session operation: AEAD
>> session}
>> +
>> +AEAD session requests are as follows:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_aead_session_para {
>> + /* See VIRTIO_CRYPTO_AEAD_* above */
>> + le32 algo;
>> + /* length of key */
>> + le32 key_len;
>> + /* Authentication tag length */
>> + le32 tag_len;
>> + /* The length of the additional authenticated data (AAD) in bytes */
>> + le32 aad_len;
>> + /* encryption or decryption, See above VIRTIO_CRYPTO_OP_* */
>> + le32 op;
>> + le32 padding;
>> +};
>> +
>> +struct virtio_crypto_aead_create_session_req {
>> + /* Device-readable part */
>> + struct virtio_crypto_aead_session_para para;
>> + u8 key[key_len];
>> +
>> + /* Device-writeable part */
>> + struct virtio_crypto_session_input input;
>> +};
>> +\end{lstlisting}
>> +
>> +\drivernormative{\subparagraph}{Session operation: create session}{Device
>> Types / Crypto Device / Device Operation / Control Virtqueue / Session
>> operation / Session operation: create session}
>> +
>> +\begin{itemize*}
>> +\item The driver MUST set the control general header and corresponding
>> properties of the union in structure virtio_crypto_op_ctrl_req. See
>> \ref{sec:Device Types / Crypto Device / Device Operation / Control
>> Virtqueue}.
>> +\item The driver MUST set the \field{opcode} field based on service type:
>> CIPHER, HASH, MAC, or AEAD.
>
>> +\item The driver MUST set the \field{queue_id} field to show used dataq.
>
> Used for what? Is the driver obligued to use that dataq for the op reqs
> associated
> with the given session. If yes where is the normative statement?
>
>> +\end{itemize*}
>> +
>> +\devicenormative{\subparagraph}{Session operation: create session}{Device
>> Types / Crypto Device / Device
>> +Operation / Control Virtqueue / Session operation / Session operation:
>> create session}
>> +
>> +\begin{itemize*}
>> +\item The device MUST set the \field{session_id} field to a unique session
>> identifier when the device finishes processing session creation.
>
> I guess only if successfull (that is status == VIRTIO_CRYPTO_OK).
>
>> +\item The device MUST set the \field{status} field to one of the values of
>> enum VIRTIO_CRYPTO_STATUS.
>
> Maybe put this one first. The formulation could be more fortunate in
> a sense that it's required to set the right status (_OK if successs,
> _NOTSUPP if ...).
>
> What shall happen if the operation fails, e.g. becasue of out of resources?
>
> Is there some sort of limit for the amount of live sessions (related to
> the previous question)? Obviously the device needs storage for the
> session data. Can the guest DOS attack the host by creating an absurd number
> of sessions?
>
>
>> +\end{itemize*}
>> +
>> +\drivernormative{\subparagraph}{Session operation: destroy session}{Device
>> Types / Crypto Device / Device
>> +Operation / Control Virtqueue / Session operation / Session operation:
>> destroy session}
>> +
>> +\begin{itemize*}
>> +\item The driver MUST set the \field{opcode} field based on service type:
>> CIPHER, HASH, MAC, or AEAD.
>> +\item The driver MUST set the \field{session_id} to a valid value assigned
>> by the device when the session was created.
>> +\end{itemize*}
>> +
>> +\devicenormative{\subparagraph}{Session operation: destroy session}{Device
>> Types / Crypto Device / Device
>> +Operation / Control Virtqueue / Session operation / Session operation:
>> destroy session}
>> +
>> +\begin{itemize*}
>> +\item The device MUST set the \field{status} field to one of the values of
>> enum VIRTIO_CRYPTO_STATUS.
>
> Same as above.
>
>> +\end{itemize*}
>> +
>> +\subsubsection{Data Virtqueue}\label{sec:Device Types / Crypto Device /
>> Device Operation / Data Virtqueue}
>> +
>> +The driver uses the data virtqueue to transmit crypto operation requests to
>> the device,
>> +and completes the crypto operations.
>> +
>> +Session mode dataq requests are as follows:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_op_data_req {
>> + struct virtio_crypto_op_header header;
>> +
>> + union {
>> + struct virtio_crypto_sym_data_req sym_req;
>> + struct virtio_crypto_hash_data_req hash_req;
>> + struct virtio_crypto_mac_data_req mac_req;
>> + struct virtio_crypto_aead_data_req aead_req;
>> + } u;
>> +};
>> +\end{lstlisting}
>> +
>> +Dataq requests for both session and stateless modes are as follows:
>
> This ain't very nice, I mean the 'both session and stateless modes' together
> with the above 'session mode dataq requests are'. In the meanwhile I know what
> you mean: if the SESSION_MODE feature bit was negotiated.
>
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_op_data_req_mux {
>> + struct virtio_crypto_op_header header;
>> +
>> + union {
>> + struct virtio_crypto_sym_data_req sym_req;
>> + struct virtio_crypto_hash_data_req hash_req;
>> + struct virtio_crypto_mac_data_req mac_req;
>> + struct virtio_crypto_aead_data_req aead_req;
>> + struct virtio_crypto_sym_data_req_stateless sym_stateless_req;
>> + struct virtio_crypto_hash_data_req_stateless hash_stateless_req;
>> + struct virtio_crypto_mac_data_req_stateless mac_stateless_req;
>> + struct virtio_crypto_aead_data_req_stateless aead_stateless_req;
>> + } u;
>> +};
>> +\end{lstlisting}
>> +
>> +The header is the general header and the union is of the algorithm-specific
>> type,
>> +which is set by the driver. All properties in the union are shown as
>> follows.
>> +
>> +There is a unified input header structure for all crypto services.
>> +
>> +The structure is defined as follows:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_inhdr {
>> + u8 status;
>> +};
>> +\end{lstlisting}
>> +
>> +\subsubsection{HASH Service Operation}\label{sec:Device Types / Crypto
>> Device / Device Operation / HASH Service Operation}
>> +
>> +Session mode HASH service requests are as follows:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_hash_para {
>> + /* length of source data */
>> + le32 src_data_len;
>> + /* hash result length */
>> + le32 hash_result_len;
>> +};
>> +
>> +struct virtio_crypto_hash_data_req {
>> + /* Device-readable part */
>> + struct virtio_crypto_hash_para para;
>> + /* Source data */
>> + u8 src_data[src_data_len];
>> +
>> + /* Device-writable part */
>> + /* Hash result data */
>> + u8 hash_result[hash_result_len];
>> + struct virtio_crypto_inhdr inhdr;
>> +};
>> +\end{lstlisting}
>> +
>> +Each data request uses virtio_crypto_hash_data_req structure to store
>> information
>> +used to run the HASH operations.
>> +
>> +The information includes the hash parameters stored in \field{para}, output
>> data and input data.
>> +The output data here includes the source data and the input data includes
>> the hash result data used to save the results of the HASH operations.
>> +\field{inhdr} stores the status of executing the HASH operations.
>> +
>> +Stateless mode HASH service requests are as follows:
>> +
>> +\begin{lstlisting}
>> +struct virtio_crypto_hash_para_statelesss {
>> + struct {
>> + /* See VIRTIO_CRYPTO_HASH_* above */
>> + le32 algo;
>> + } sess_para;
>> +
>> + /* length of source data */
>> + le32 src_data_len;
>> + /* hash result length */
>> + le32 hash_result_len;
>> + le32 reserved;
>> +};
>> +struct virtio_crypto_hash_data_req_stateless {
>> + /* Device-readable part */
>> + struct virtio_crypto_hash_para_stateless para;
>> + /* Source data */
>> + u8 src_data[src_data_len];
>> +
>> + /* Device-writable part */
>> + /* Hash result data */
>> + u8 hash_result[hash_result_len];
>> + struct virtio_crypto_inhdr inhdr;
>> +};
>> +\end{lstlisting}
>> +
>> +\drivernormative{\paragraph}{HASH Service Operation}{Device Types / Crypto
>> Device / Device Operation / HASH Service Operation}
>> +
>> +\begin{itemize*}
>> +\item If the driver uses the session mode, then the driver MUST set
>> \field{session_id} in struct virtio_crypto_op_header
>> + to a valid value assigned by the device when the session was created.
>> +\item If the VIRTIO_CRYPTO_F_STATELESS_MODE feature bit is negotiated, the
>> driver MUST use struct virtio_crypto_op_data_req_mux to wrap crypto
>> requests. Otherwise, the driver MUST use struct virtio_crypto_op_data_req.
>> +\item If the VIRTIO_CRYPTO_F_HASH_STATELESS_MODE feature bit is negotiated,
>> 1) if the driver uses the stateless mode, then the driver MUST set the
>> \field{flag} field in struct virtio_crypto_op_header
>> + to VIRTIO_CRYPTO_FLAG_STATELESS_MODE and MUST set the fields in
>> struct virtio_crypto_hash_para_statelession.sess_para, 2) if the driver uses
>> the session mode, then the driver MUST set the \field{flag} field in struct
>> virtio_crypto_op_header to VIRTIO_CRYPTO_FLAG_STATE_MODE.
>> +\item The driver MUST set \field{opcode} in struct virtio_crypto_op_header
>> to VIRTIO_CRYPTO_HASH.
>> +\end{itemize*}
>> +
>> +\devicenormative{\paragraph}{HASH Service Operation}{Device Types / Crypto
>> Device / Device Operation / HASH Service Operation}
>> +
>> +\begin{itemize*}
>> +\item If the VIRTIO_CRYPTO_F_STATELESS_MODE feature bit is negotiated, the
>> device MUST parse the struct virtio_crypto_op_data_req_mux for crypto
>> requests. Otherwise, the device MUST parse the struct
>> virtio_crypto_op_data_req.
>> +\item If the VIRTIO_CRYPTO_F_HASH_STATELESS_MODE feature bit is negotiated,
>> the device MUST parse \field{flag} field in struct virtio_crypto_op_header
>> in order to decide which mode the driver uses.
>> +\item The device MUST copy the results of HASH operations in the
>> hash_result[] if HASH operations success.
>> +\item The device MUST set \field{status} in struct virtio_crypto_inhdr to
>> one of the values of enum VIRTIO_CRYPTO_STATUS.
>> +\end{itemize*}
>> +
>
> OK, I have read this to the end and I don't think there is anything which
> requires
> a comment at this stage. I would like to concentrate on your QEMU patches
> first,
> and I think we have enough questions/issues already.
>
> Regards,
> Halil
> [..]
>
>
ping
If you have any need for further discussion on this, I would prefer
having it rather sooner than later.
- Re: [Qemu-devel] [PATCH v18 1/2] virtio-crypto: Add virtio crypto device specification, (continued)
Re: [Qemu-devel] [virtio-dev] RE: [PATCH v18 1/2] virtio-crypto: Add virtio crypto device specification, Halil Pasic, 2017/05/04
Re: [Qemu-devel] [PATCH v18 1/2] virtio-crypto: Add virtio crypto device specification, Gonglei (Arei), 2017/05/04
Re: [Qemu-devel] [PATCH v18 1/2] virtio-crypto: Add virtio crypto device specification, Halil Pasic, 2017/05/10