qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v4 18/18] tests: crypto: add hmac speed benchmar


From: Daniel P. Berrange
Subject: Re: [Qemu-devel] [PATCH v4 18/18] tests: crypto: add hmac speed benchmark support
Date: Tue, 11 Jul 2017 13:34:45 +0100
User-agent: Mutt/1.8.0 (2017-02-23)

On Tue, Jul 04, 2017 at 04:57:10PM +0800, Longpeng(Mike) wrote:
> This patch add a hmac speed benchmark, it helps us to
> measure the performance by using "make check-speed" or
> using "./tests/benchmark-crypto-hmac" directly.
> 
> Signed-off-by: Longpeng(Mike) <address@hidden>
> ---
>  tests/Makefile.include        |  2 +
>  tests/benchmark-crypto-hmac.c | 94 
> +++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 96 insertions(+)
>  create mode 100644 tests/benchmark-crypto-hmac.c
> 
> diff --git a/tests/Makefile.include b/tests/Makefile.include
> index e83eb6b..258bcbc 100644
> --- a/tests/Makefile.include
> +++ b/tests/Makefile.include
> @@ -99,6 +99,7 @@ gcov-files-test-write-threshold-y = block/write-threshold.c
>  check-unit-y += tests/test-crypto-hash$(EXESUF)
>  check-speed-y += tests/benchmark-crypto-hash$(EXESUF)
>  check-unit-y += tests/test-crypto-hmac$(EXESUF)
> +check-speed-y += tests/benchmark-crypto-hmac$(EXESUF)
>  check-unit-y += tests/test-crypto-cipher$(EXESUF)
>  check-speed-y += tests/benchmark-crypto-cipher$(EXESUF)
>  check-unit-y += tests/test-crypto-secret$(EXESUF)
> @@ -637,6 +638,7 @@ tests/test-bitcnt$(EXESUF): tests/test-bitcnt.o 
> $(test-util-obj-y)
>  tests/test-crypto-hash$(EXESUF): tests/test-crypto-hash.o 
> $(test-crypto-obj-y)
>  tests/benchmark-crypto-hash$(EXESUF): tests/benchmark-crypto-hash.o 
> $(test-crypto-obj-y)
>  tests/test-crypto-hmac$(EXESUF): tests/test-crypto-hmac.o 
> $(test-crypto-obj-y)
> +tests/benchmark-crypto-hmac$(EXESUF): tests/benchmark-crypto-hmac.o 
> $(test-crypto-obj-y)
>  tests/test-crypto-cipher$(EXESUF): tests/test-crypto-cipher.o 
> $(test-crypto-obj-y)
>  tests/benchmark-crypto-cipher$(EXESUF): tests/benchmark-crypto-cipher.o 
> $(test-crypto-obj-y)
>  tests/test-crypto-secret$(EXESUF): tests/test-crypto-secret.o 
> $(test-crypto-obj-y)
> diff --git a/tests/benchmark-crypto-hmac.c b/tests/benchmark-crypto-hmac.c
> new file mode 100644
> index 0000000..05b02a5
> --- /dev/null
> +++ b/tests/benchmark-crypto-hmac.c
> @@ -0,0 +1,94 @@
> +/*
> + * QEMU Crypto hmac speed benchmark
> + *
> + * Copyright (c) 2017 HUAWEI TECHNOLOGIES CO., LTD.
> + *
> + * Authors:
> + *    Longpeng(Mike) <address@hidden>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or
> + * (at your option) any later version.  See the COPYING file in the
> + * top-level directory.
> + */
> +#include "qemu/osdep.h"
> +#include "crypto/init.h"
> +#include "crypto/hmac.h"
> +
> +#define KEY "monkey monkey monkey monkey"
> +
> +static void test_hmac_speed(const void *opaque)
> +{
> +    size_t chunk_size = (size_t)opaque;
> +    QCryptoHmac *hmac = NULL;
> +    uint8_t *in = NULL, *out = NULL;
> +    size_t out_len = 0;
> +    double total = 0.0;
> +    struct iovec iov;
> +    Error *err = NULL;
> +    int ret;
> +
> +    if (!qcrypto_hmac_supports(QCRYPTO_HASH_ALG_SHA256)) {
> +        return;
> +    }
> +
> +    hmac = qcrypto_hmac_new(QCRYPTO_HASH_ALG_SHA256, (const uint8_t *)KEY,
> +                            strlen(KEY), &err);
> +    g_assert(err == NULL);
> +    g_assert(hmac != NULL);

Just push these lines down into the start of the while loop

> +
> +    in = g_new0(uint8_t, chunk_size);
> +    memset(in, g_test_rand_int(), chunk_size);
> +
> +    iov.iov_base = (char *)in;
> +    iov.iov_len = chunk_size;
> +
> +    g_test_timer_start();
> +    do {
> +        ret = qcrypto_hmac_bytesv(hmac, &iov, 1, &out, &out_len, &err);
> +        g_assert(ret == 0);
> +        g_assert(err == NULL);
> +
> +#if !defined(CONFIG_NETTLE) && !defined(CONFIG_GCRYPT)
> +        /*
> +         * qcrypto_hmac_bytesv() uses g_checksum_get_digest() to get the
> +         * digest. Once this function has been called, the #GChecksum is
> +         * closed and can no longer be updated with g_checksum_update().
> +         * So...we must free glib-backend hmac object and renew one here.
> +         */
> +        qcrypto_hmac_free(hmac);
> +        hmac = qcrypto_hmac_new(QCRYPTO_HASH_ALG_SHA256, (const uint8_t 
> *)KEY,
> +                                strlen(KEY), &err);
> +        g_assert(err == NULL);
> +        g_assert(hmac != NULL);
> +#endif

And get rid of this - just have an unconditional qcrypto_hmac_free call.

> +        total += chunk_size;
> +    } while (g_test_timer_elapsed() < 5.0);
> +
> +    total /= 1024 * 1024; /* to MB */
> +
> +    g_print("hmac(sha256): ");
> +    g_print("Testing chunk_size %ld bytes ", chunk_size);
> +    g_print("done: %.2f MB in %.2f secs: ", total, g_test_timer_last());
> +    g_print("%.2f MB/sec\n", total / g_test_timer_last());
> +
> +    qcrypto_hmac_free(hmac);

So this won't be needed either.

> +    g_free(out);
> +    g_free(in);
> +}
> +
> +int main(int argc, char **argv)
> +{
> +    size_t i;
> +    char name[64];
> +
> +    g_test_init(&argc, &argv, NULL);
> +    g_assert(qcrypto_init(NULL) == 0);
> +
> +    for (i = 512; i <= (64 * 1204); i *= 2) {
> +        memset(name, 0 , sizeof(name));
> +        snprintf(name, sizeof(name), "/crypto/hmac/speed-%lu", i);
> +        g_test_add_data_func(name, (void *)i, test_hmac_speed);
> +    }
> +
> +    return g_test_run();
> +}
> -- 
> 1.8.3.1
> 
> 

Regards,
Daniel
-- 
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|



reply via email to

[Prev in Thread] Current Thread [Next in Thread]