qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [RFC PATCH v2 4/6] hw/pci: introduce bridge-only vendor-spe


From: Aleksandr Bezzubikov
Subject: [Qemu-devel] [RFC PATCH v2 4/6] hw/pci: introduce bridge-only vendor-specific capability to provide some hints to firmware
Date: Sun, 23 Jul 2017 01:15:41 +0300

On PCI init PCI bridges may need some
extra info about bus number to reserve, IO, memory and
prefetchable memory limits. QEMU can provide this
with special vendor-specific PCI capability.

Sizes of limits match ones from
PCI Type 1 Configuration Space Header,
number of buses to reserve occupies only 1 byte 
since it is the size of Subordinate Bus Number register.

Signed-off-by: Aleksandr Bezzubikov <address@hidden>
---
 hw/pci/pci_bridge.c         | 27 +++++++++++++++++++++++++++
 include/hw/pci/pci_bridge.h | 18 ++++++++++++++++++
 2 files changed, 45 insertions(+)

diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
index 720119b..8ec6c2c 100644
--- a/hw/pci/pci_bridge.c
+++ b/hw/pci/pci_bridge.c
@@ -408,6 +408,33 @@ void pci_bridge_map_irq(PCIBridge *br, const char* 
bus_name,
     br->bus_name = bus_name;
 }
 
+
+int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
+                              uint8_t bus_reserve, uint32_t io_limit,
+                              uint16_t mem_limit, uint64_t pref_limit,
+                              Error **errp)
+{
+    size_t cap_len = sizeof(PCIBridgeQemuCap);
+    PCIBridgeQemuCap cap;
+
+    cap.len = cap_len;
+    cap.bus_res = bus_reserve;
+    cap.io_lim = io_limit & 0xFF;
+    cap.io_lim_upper = io_limit >> 8 & 0xFFFF;
+    cap.mem_lim = mem_limit;
+    cap.pref_lim = pref_limit & 0xFFFF;
+    cap.pref_lim_upper = pref_limit >> 16 & 0xFFFFFFFF;
+
+    int offset = pci_add_capability(dev, PCI_CAP_ID_VNDR,
+                                    cap_offset, cap_len, errp);
+    if (offset < 0) {
+        return offset;
+    }
+
+    memcpy(dev->config + offset + 2, (char *)&cap + 2, cap_len - 2);
+    return 0;
+}
+
 static const TypeInfo pci_bridge_type_info = {
     .name = TYPE_PCI_BRIDGE,
     .parent = TYPE_PCI_DEVICE,
diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h
index ff7cbaa..c9f642c 100644
--- a/include/hw/pci/pci_bridge.h
+++ b/include/hw/pci/pci_bridge.h
@@ -67,4 +67,22 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name,
 #define  PCI_BRIDGE_CTL_DISCARD_STATUS 0x400   /* Discard timer status */
 #define  PCI_BRIDGE_CTL_DISCARD_SERR   0x800   /* Discard timer SERR# enable */
 
+typedef struct PCIBridgeQemuCap {
+    uint8_t id;     /* Standard PCI capability header field */
+    uint8_t next;   /* Standard PCI capability header field */
+    uint8_t len;    /* Standard PCI vendor-specific capability header field */
+    uint8_t bus_res;
+    uint32_t pref_lim_upper;
+    uint16_t pref_lim;
+    uint16_t mem_lim;
+    uint16_t io_lim_upper;
+    uint8_t io_lim;
+    uint8_t padding;
+} PCIBridgeQemuCap;
+
+int pci_bridge_help_cap_init(PCIDevice *dev, int cap_offset,
+                              uint8_t bus_reserve, uint32_t io_limit,
+                              uint16_t mem_limit, uint64_t pref_limit,
+                              Error **errp);
+
 #endif /* QEMU_PCI_BRIDGE_H */
-- 
2.7.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]