qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [Qemu-ppc] [for-2.11 PATCH 00/26] spapr: add support fo


From: Cédric Le Goater
Subject: Re: [Qemu-devel] [Qemu-ppc] [for-2.11 PATCH 00/26] spapr: add support for PHB hotplug
Date: Fri, 28 Jul 2017 07:35:34 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.8.0

On 07/28/2017 05:40 AM, David Gibson wrote:
> On Fri, Jul 28, 2017 at 01:27:05PM +1000, Alexey Kardashevskiy wrote:
>> On 28/07/17 02:39, Greg Kurz wrote:
>>> On Wed, 26 Jul 2017 17:31:17 -0300
>>> Daniel Henrique Barboza <address@hidden> wrote:
>>>
>>>> I've tested the patch set using Greg's Github branch. It worked fine in 
>>>> my tests
>>>> using a Fedora 26 and an Ubuntu 17.04 guests. I have two observations
>>>> though:
>>>>
>>>> 1 - This is not related to this patch set per se because it is 
>>>> reproducible on master, but
>>>> I think it is interfering with this new feature.  There is a 
>>>> warning/error message in
>>>> the kernel right after SLOF that goes:
>>>>
>>>> (...)
>>>>   -> smp_release_cpus()  
>>>> spinning_secondaries = 0
>>>>   <- smp_release_cpus()
>>>> Linux ppc64le
>>>> #1 SMP Mon Jul 1[    0.030450] pci 0000:00:02.0: of_irq_parse_pci: 
>>>> failed with rc=-22
>>>> [    0.030552] pci 0000:00:0f.0: of_irq_parse_pci: failed with rc=-22
>>>> [  OK  ] Started Security Auditing Service.
>>>> (...)
>>>>
>>>
>>> This is a regression in QEMU master introduced by this commit:
>>>
>>> commit b87680427e8a3ff682f66514e99a8344e7437247
>>> Author: Cédric Le Goater <address@hidden>
>>> Date:   Wed Jul 5 19:13:15 2017 +0200
>>>
>>>     spapr: populate device tree depending on XIVE_EXPLOIT option
>>>     
>>>     When XIVE is supported, the device tree should be populated
>>>     accordingly and the XIVE memory regions mapped to activate MMIOs.
>>>     
>>>     Depending on the design we choose, we could also allocate different
>>>     ICS and ICP objects, or switch between objects. This needs to be
>>>     discussed.
>>>     
>>>     Signed-off-by: Cédric Le Goater <address@hidden>
>>>     Signed-off-by: David Gibson <address@hidden>
>>>
>>> It is very similar to the issue that motivated the new 
>>> KVMPPC_H_UPDATE_PHANDLE
>>> hcall (see patch 24 and 26 in this series):
>>>
>>> - QEMU creates an "interrupt-controller" node with a phandle property
>>>   with the value 0x1111
>>> - QEMU passes the FDT to SLOF
>>> - SLOF converts all references to the phandle to an SLOF internal value
>>>
>>> => from now on (ie, until the next machine reset), the guest only knows
>>>    the OF phandle.
>>>
>>> - during CAS, if we go XICS, we send back an updated FDT with the
>>>   phandle of the "interrupt-controller" node reverted to 0x1111
>>>
>>> => the guest complains because all cold-plugged devices nodes refer
>>>    to the OF phandle, not 0x1111
>>>
>>> A solution is to use the value set by KVMPPC_H_UPDATE_PHANDLE during CAS
>>> instead of 0x1111. I could verify it makes the guest warning disappear.
>>>
>>> I'll send a dedicated patchset to fix this in 2.10.
>>
>>
>> The SLOF I pushed for 2.10 does not have it though. And the rest of XIVE is
>> not targeted for 2.10 anyway. So imho the solution is reverting "spapr:
>> populate device tree depending on XIVE_EXPLOIT option" for 2.10.
> 
> I agree, I've applied the revert to ppc-for-2.10 now.

Sure. 

Greg, have you found a solution to get around this problem or do we need
to populate the device tree with the interrupt controller node for SLOF ? 

Thanks,

C.  




reply via email to

[Prev in Thread] Current Thread [Next in Thread]