[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH] docs: Convert migration.txt to rst
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [Qemu-devel] [PATCH] docs: Convert migration.txt to rst |
Date: |
Wed, 13 Dec 2017 19:49:30 +0000 |
User-agent: |
Mutt/1.9.1 (2017-09-22) |
* Peter Xu (address@hidden) wrote:
> On Tue, Dec 12, 2017 at 01:56:00PM +0000, Dr. David Alan Gilbert (git) wrote:
> > From: "Dr. David Alan Gilbert" <address@hidden>
> >
> > Mostly just manual conversion with very minor fixes.
> >
> > Signed-off-by: Dr. David Alan Gilbert <address@hidden>
>
> Reviewed-by: Peter Xu <address@hidden>
>
> Some nits below, but r-b is fine with/without changing them. Mostly
> it's about wrapping lines. I think .rst supports wrapping lines?
Thanks, I've fixed them. What I hadn't figured out previously was how
to do the wrapping in the middle of lists; you've got to get the indent
on the wrapped lines just write for the list not to complain.
Dave
> Thanks,
>
> > ---
> > docs/devel/{migration.txt => migration.rst} | 326
> > +++++++++++++++-------------
> > 1 file changed, 176 insertions(+), 150 deletions(-)
> > rename docs/devel/{migration.txt => migration.rst} (74%)
> >
> > diff --git a/docs/devel/migration.txt b/docs/devel/migration.rst
> > similarity index 74%
> > rename from docs/devel/migration.txt
> > rename to docs/devel/migration.rst
> > index 4030703726..7d64298cd7 100644
> > --- a/docs/devel/migration.txt
> > +++ b/docs/devel/migration.rst
> > @@ -1,4 +1,6 @@
> > -= Migration =
> > +=========
> > +Migration
> > +=========
> >
> > QEMU has code to load/save the state of the guest that it is running.
> > These are two complementary operations. Saving the state just does
> > @@ -26,7 +28,8 @@ the guest to be stopped. Typically the time that the
> > guest is
> > unresponsive during live migration is the low hundred of milliseconds
> > (notice that this depends on a lot of things).
> >
> > -=== Types of migration ===
> > +Types of migration
> > +==================
> >
> > Now that we have talked about live migration, there are several ways
> > to do migration:
> > @@ -41,21 +44,25 @@ All these four migration protocols use the same
> > infrastructure to
> > save/restore state devices. This infrastructure is shared with the
> > savevm/loadvm functionality.
> >
> > -=== State Live Migration ===
> > +State Live Migration
> > +====================
> >
> > This is used for RAM and block devices. It is not yet ported to vmstate.
> > <Fill more information here>
> >
> > -=== What is the common infrastructure ===
> > +Common infrastructure
> > +=====================
> >
> > QEMU uses a QEMUFile abstraction to be able to do migration. Any type
> > of migration that wants to use QEMU infrastructure has to create a
> > QEMUFile with:
> >
> > -QEMUFile *qemu_fopen_ops(void *opaque,
> > - QEMUFilePutBufferFunc *put_buffer,
> > - QEMUFileGetBufferFunc *get_buffer,
> > - QEMUFileCloseFunc *close);
> > +.. code:: c
> > +
> > + QEMUFile *qemu_fopen_ops(void *opaque,
> > + QEMUFilePutBufferFunc *put_buffer,
> > + QEMUFileGetBufferFunc *get_buffer,
> > + QEMUFileCloseFunc *close);
> >
> > The functions have the following functionality:
> >
> > @@ -63,19 +70,25 @@ This function writes a chunk of data to a file at the
> > given position.
> > The pos argument can be ignored if the file is only used for
> > streaming. The handler should try to write all of the data it can.
> >
> > -typedef int (QEMUFilePutBufferFunc)(void *opaque, const uint8_t *buf,
> > - int64_t pos, int size);
> > +.. code:: c
> > +
> > + typedef int (QEMUFilePutBufferFunc)(void *opaque, const uint8_t *buf,
> > + int64_t pos, int size);
> >
> > Read a chunk of data from a file at the given position. The pos argument
> > can be ignored if the file is only be used for streaming. The number of
> > bytes actually read should be returned.
> >
> > -typedef int (QEMUFileGetBufferFunc)(void *opaque, uint8_t *buf,
> > - int64_t pos, int size);
> > +.. code:: c
> > +
> > + typedef int (QEMUFileGetBufferFunc)(void *opaque, uint8_t *buf,
> > + int64_t pos, int size);
> >
> > Close a file and return an error code.
> >
> > -typedef int (QEMUFileCloseFunc)(void *opaque);
> > +.. code:: c
> > +
> > + typedef int (QEMUFileCloseFunc)(void *opaque);
> >
> > You can use any internal state that you need using the opaque void *
> > pointer that is passed to all functions.
> > @@ -83,7 +96,8 @@ pointer that is passed to all functions.
> > The important functions for us are put_buffer()/get_buffer() that
> > allow to write/read a buffer into the QEMUFile.
> >
> > -=== How to save the state of one device ===
> > +Saving the state of one device
> > +==============================
> >
> > The state of a device is saved using intermediate buffers. There are
> > some helper functions to assist this saving.
> > @@ -97,30 +111,34 @@ associated with a series of fields saved. The
> > save_state always saves
> > the state as the newer version. But load_state sometimes is able to
> > load state from an older version.
> >
> > -=== Legacy way ===
> > +Legacy way
> > +----------
> >
> > This way is going to disappear as soon as all current users are ported to
> > VMSTATE.
> >
> > Each device has to register two functions, one to save the state and
> > another to load the state back.
> >
> > -int register_savevm(DeviceState *dev,
> > - const char *idstr,
> > - int instance_id,
> > - int version_id,
> > - SaveStateHandler *save_state,
> > - LoadStateHandler *load_state,
> > - void *opaque);
> > +.. code:: c
> > +
> > + int register_savevm(DeviceState *dev,
> > + const char *idstr,
> > + int instance_id,
> > + int version_id,
> > + SaveStateHandler *save_state,
> > + LoadStateHandler *load_state,
> > + void *opaque);
> >
> > -typedef void SaveStateHandler(QEMUFile *f, void *opaque);
> > -typedef int LoadStateHandler(QEMUFile *f, void *opaque, int version_id);
> > + typedef void SaveStateHandler(QEMUFile *f, void *opaque);
> > + typedef int LoadStateHandler(QEMUFile *f, void *opaque, int version_id);
> >
> > The important functions for the device state format are the save_state
> > and load_state. Notice that load_state receives a version_id
> > parameter to know what state format is receiving. save_state doesn't
> > have a version_id parameter because it always uses the latest version.
> >
> > -=== VMState ===
> > +VMState
> > +-------
> >
> > The legacy way of saving/loading state of the device had the problem
> > that we have to maintain two functions in sync. If we did one change
> > @@ -135,23 +153,27 @@ save/load functions.
> >
> > An example (from hw/input/pckbd.c)
> >
> > -static const VMStateDescription vmstate_kbd = {
> > - .name = "pckbd",
> > - .version_id = 3,
> > - .minimum_version_id = 3,
> > - .fields = (VMStateField[]) {
> > - VMSTATE_UINT8(write_cmd, KBDState),
> > - VMSTATE_UINT8(status, KBDState),
> > - VMSTATE_UINT8(mode, KBDState),
> > - VMSTATE_UINT8(pending, KBDState),
> > - VMSTATE_END_OF_LIST()
> > - }
> > -};
> > +.. code:: c
> > +
> > + static const VMStateDescription vmstate_kbd = {
> > + .name = "pckbd",
> > + .version_id = 3,
> > + .minimum_version_id = 3,
> > + .fields = (VMStateField[]) {
> > + VMSTATE_UINT8(write_cmd, KBDState),
> > + VMSTATE_UINT8(status, KBDState),
> > + VMSTATE_UINT8(mode, KBDState),
> > + VMSTATE_UINT8(pending, KBDState),
> > + VMSTATE_END_OF_LIST()
> > + }
> > + };
> >
> > We are declaring the state with name "pckbd".
> > The version_id is 3, and the fields are 4 uint8_t in a KBDState structure.
> > We registered this with:
> >
> > +.. code:: c
> > +
> > vmstate_register(NULL, 0, &vmstate_kbd, s);
> >
> > Note: talk about how vmstate <-> qdev interact, and what the instance ids
> > mean.
> > @@ -159,7 +181,8 @@ Note: talk about how vmstate <-> qdev interact, and
> > what the instance ids mean.
> > You can search for VMSTATE_* macros for lots of types used in QEMU in
> > include/hw/hw.h.
> >
> > -=== More about versions ===
> > +More about versions
> > +-------------------
> >
> > Version numbers are intended for major incompatible changes to the
> > migration of a device, and using them breaks backwards-migration
> > @@ -183,7 +206,8 @@ function is deprecated and will be removed when no more
> > users are left.
> > Saving state will always create a section with the 'version_id' value
> > and thus can't be loaded by any older QEMU.
> >
> > -=== Massaging functions ===
> > +Massaging functions
> > +-------------------
> >
> > Sometimes, it is not enough to be able to save the state directly
> > from one structure, we need to fill the correct values there. One
> > @@ -194,20 +218,19 @@ load the state for the cpu that we have just loaded
> > from the QEMUFile.
> >
> > The functions to do that are inside a vmstate definition, and are called:
> >
> > -- int (*pre_load)(void *opaque);
> > +- ``int (*pre_load)(void *opaque);``
> >
> > This function is called before we load the state of one device.
> >
> > -- int (*post_load)(void *opaque, int version_id);
> > +- ``int (*post_load)(void *opaque, int version_id);``
> >
> > This function is called after we load the state of one device.
> >
> > -- int (*pre_save)(void *opaque);
> > +- ``int (*pre_save)(void *opaque);``
> >
> > This function is called before we save the state of one device.
> >
> > -Example: You can look at hpet.c, that uses the three function to
> > - massage the state that is transferred.
> > +Example: You can look at hpet.c, that uses the three function to massage
> > the state that is transferred.
>
> This change seems meaningless, I would prefer keep it wrapped, but I'm
> fine with it.
>
> >
> > If you use memory API functions that update memory layout outside
> > initialization (i.e., in response to a guest action), this is a strong
> > @@ -221,7 +244,8 @@ Examples of such memory API functions are:
> > - memory_region_set_address()
> > - memory_region_set_alias_offset()
> >
> > -=== Subsections ===
> > +Subsections
> > +-----------
> >
> > The use of version_id allows to be able to migrate from older versions
> > to newer versions of a device. But not the other way around. This
> > @@ -251,48 +275,50 @@ value that it uses.
> >
> > Example:
> >
> > -static bool ide_drive_pio_state_needed(void *opaque)
> > -{
> > - IDEState *s = opaque;
> > -
> > - return ((s->status & DRQ_STAT) != 0)
> > - || (s->bus->error_status & BM_STATUS_PIO_RETRY);
> > -}
> > -
> > -const VMStateDescription vmstate_ide_drive_pio_state = {
> > - .name = "ide_drive/pio_state",
> > - .version_id = 1,
> > - .minimum_version_id = 1,
> > - .pre_save = ide_drive_pio_pre_save,
> > - .post_load = ide_drive_pio_post_load,
> > - .needed = ide_drive_pio_state_needed,
> > - .fields = (VMStateField[]) {
> > - VMSTATE_INT32(req_nb_sectors, IDEState),
> > - VMSTATE_VARRAY_INT32(io_buffer, IDEState, io_buffer_total_len, 1,
> > - vmstate_info_uint8, uint8_t),
> > - VMSTATE_INT32(cur_io_buffer_offset, IDEState),
> > - VMSTATE_INT32(cur_io_buffer_len, IDEState),
> > - VMSTATE_UINT8(end_transfer_fn_idx, IDEState),
> > - VMSTATE_INT32(elementary_transfer_size, IDEState),
> > - VMSTATE_INT32(packet_transfer_size, IDEState),
> > - VMSTATE_END_OF_LIST()
> > - }
> > -};
> > -
> > -const VMStateDescription vmstate_ide_drive = {
> > - .name = "ide_drive",
> > - .version_id = 3,
> > - .minimum_version_id = 0,
> > - .post_load = ide_drive_post_load,
> > - .fields = (VMStateField[]) {
> > - .... several fields ....
> > - VMSTATE_END_OF_LIST()
> > - },
> > - .subsections = (const VMStateDescription*[]) {
> > - &vmstate_ide_drive_pio_state,
> > - NULL
> > - }
> > -};
> > +.. code:: c
> > +
> > + static bool ide_drive_pio_state_needed(void *opaque)
> > + {
> > + IDEState *s = opaque;
> > +
> > + return ((s->status & DRQ_STAT) != 0)
> > + || (s->bus->error_status & BM_STATUS_PIO_RETRY);
> > + }
> > +
> > + const VMStateDescription vmstate_ide_drive_pio_state = {
> > + .name = "ide_drive/pio_state",
> > + .version_id = 1,
> > + .minimum_version_id = 1,
> > + .pre_save = ide_drive_pio_pre_save,
> > + .post_load = ide_drive_pio_post_load,
> > + .needed = ide_drive_pio_state_needed,
> > + .fields = (VMStateField[]) {
> > + VMSTATE_INT32(req_nb_sectors, IDEState),
> > + VMSTATE_VARRAY_INT32(io_buffer, IDEState, io_buffer_total_len, 1,
> > + vmstate_info_uint8, uint8_t),
> > + VMSTATE_INT32(cur_io_buffer_offset, IDEState),
> > + VMSTATE_INT32(cur_io_buffer_len, IDEState),
> > + VMSTATE_UINT8(end_transfer_fn_idx, IDEState),
> > + VMSTATE_INT32(elementary_transfer_size, IDEState),
> > + VMSTATE_INT32(packet_transfer_size, IDEState),
> > + VMSTATE_END_OF_LIST()
> > + }
> > + };
> > +
> > + const VMStateDescription vmstate_ide_drive = {
> > + .name = "ide_drive",
> > + .version_id = 3,
> > + .minimum_version_id = 0,
> > + .post_load = ide_drive_post_load,
> > + .fields = (VMStateField[]) {
> > + .... several fields ....
> > + VMSTATE_END_OF_LIST()
> > + },
> > + .subsections = (const VMStateDescription*[]) {
> > + &vmstate_ide_drive_pio_state,
> > + NULL
> > + }
> > + };
> >
> > Here we have a subsection for the pio state. We only need to
> > save/send this state when we are in the middle of a pio operation
> > @@ -305,14 +331,11 @@ to send a subsection allows backwards migration
> > compatibility when
> > new subsections are added.
> >
> > For example;
> > - a) Add a new property using DEFINE_PROP_BOOL - e.g. support-foo and
> > - default it to true.
> > - b) Add an entry to the HW_COMPAT_ for the previous version
> > - that sets the property to false.
> > + a) Add a new property using ``DEFINE_PROP_BOOL`` - e.g. support-foo and
> > default it to true.
> > + b) Add an entry to the ``HW_COMPAT_`` for the previous version that
> > sets the property to false.
> > c) Add a static bool support_foo function that tests the property.
> > d) Add a subsection with a .needed set to the support_foo function
> > - e) (potentially) Add a pre_load that sets up a default value for 'foo'
> > - to be used if the subsection isn't loaded.
> > + e) (potentially) Add a pre_load that sets up a default value for 'foo'
> > to be used if the subsection isn't loaded.
>
> (same to these lines)
>
> >
> > Now that subsection will not be generated when using an older
> > machine type and the migration stream will be accepted by older
> > @@ -332,25 +355,28 @@ in most cases. In general the preference is to tie
> > the subsection to
> > the machine type, and allow reliable migrations, unless the behaviour
> > from omission of the subsection is really bad.
> >
> > -= Not sending existing elements =
> > +Not sending existing elements
> > +-----------------------------
> >
> > Sometimes members of the VMState are no longer needed;
> > - removing them will break migration compatibility
> > - making them version dependent and bumping the version will break
> > backwards
> > - migration compatibility.
> > + - removing them will break migration compatibility
> > +
> > + - making them version dependent and bumping the version will break
> > backwards migration compatibility.
> >
> > The best way is to:
> > - a) Add a new property/compatibility/function in the same way for
> > subsections
> > - above.
> > + a) Add a new property/compatibility/function in the same way for
> > subsections above.
> > b) replace the VMSTATE macro with the _TEST version of the macro, e.g.:
> > - VMSTATE_UINT32(foo, barstruct)
> > +
> > + ``VMSTATE_UINT32(foo, barstruct)``
> > +
> > becomes
> > - VMSTATE_UINT32_TEST(foo, barstruct, pre_version_baz)
> >
> > - Sometime in the future when we no longer care about the ancient
> > -versions these can be killed off.
> > + ``VMSTATE_UINT32_TEST(foo, barstruct, pre_version_baz)``
> >
> > -= Return path =
> > + Sometime in the future when we no longer care about the ancient
> > versions these can be killed off.
> > +
> > +Return path
> > +-----------
> >
> > In most migration scenarios there is only a single data path that runs
> > from the source VM to the destination, typically along a single fd
> > (although
> > @@ -369,10 +395,11 @@ path.
> >
> > Destination side
> > Forward path - read by main thread
> > - Return path - opened by main thread, written by main thread AND
> > postcopy
> > - thread (protected by rp_mutex)
> > + Return path - opened by main thread, written by main thread AND
> > postcopy thread (protected by rp_mutex)
>
> (same here)
>
> > +
> > +Postcopy
> > +========
> >
> > -= Postcopy =
> > 'Postcopy' migration is a way to deal with migrations that refuse to
> > converge
> > (or take too long to converge) its plus side is that there is an upper
> > bound on
> > the amount of migration traffic and time it takes, the down side is that
> > during
> > @@ -386,17 +413,18 @@ a fault that's translated by QEMU into a request to
> > the source QEMU.
> > Postcopy can be combined with precopy (i.e. normal migration) so that if
> > precopy
> > doesn't finish in a given time the switch is made to postcopy.
> >
> > -=== Enabling postcopy ===
> > +Enabling postcopy
> > +-----------------
> >
> > To enable postcopy, issue this command on the monitor prior to the
> > start of migration:
> >
> > -migrate_set_capability postcopy-ram on
> > +``migrate_set_capability postcopy-ram on``
> >
> > The normal commands are then used to start a migration, which is still
> > started in precopy mode. Issuing:
> >
> > -migrate_start_postcopy
> > +``migrate_start_postcopy``
> >
> > will now cause the transition from precopy to postcopy.
> > It can be issued immediately after migration is started or any
> > @@ -406,7 +434,8 @@ Note: During the postcopy phase, the bandwidth limits
> > set using
> > migrate_set_speed is ignored (to avoid delaying requested pages that
> > the destination is waiting for).
> >
> > -=== Postcopy device transfer ===
> > +Postcopy device transfer
> > +------------------------
> >
> > Loading of device data may cause the device emulation to access guest RAM
> > that may trigger faults that have to be resolved by the source, as such
> > @@ -416,6 +445,7 @@ before the device load begins to free the stream up.
> > This is achieved by
> > 'packaging' the device data into a blob that's read in one go.
> >
> > Source behaviour
> > +----------------
> >
> > Until postcopy is entered the migration stream is identical to normal
> > precopy, except for the addition of a 'postcopy advise' command at
> > @@ -423,11 +453,10 @@ the beginning, to tell the destination that postcopy
> > might happen.
> > When postcopy starts the source sends the page discard data and then
> > forms the 'package' containing:
> >
> > - Command: 'postcopy listen'
> > - The device state
> > - A series of sections, identical to the precopy streams device state
> > stream
> > - containing everything except postcopiable devices (i.e. RAM)
> > - Command: 'postcopy run'
> > + - Command: 'postcopy listen'
> > + - The device state
> > + A series of sections, identical to the precopy streams device state
> > stream containing everything except postcopiable devices (i.e. RAM)
>
> (a super long line, fine too)
>
> > + - Command: 'postcopy run'
> >
> > The 'package' is sent as the data part of a Command: 'CMD_PACKAGED', and
> > the
> > contents are formatted in the same way as the main migration stream.
> > @@ -441,44 +470,38 @@ to be sent quickly in the hope that those pages are
> > likely to be used
> > by the destination soon.
> >
> > Destination behaviour
> > +---------------------
> >
> > Initially the destination looks the same as precopy, with a single thread
> > reading the migration stream; the 'postcopy advise' and 'discard' commands
> > are processed to change the way RAM is managed, but don't affect the stream
> > processing.
> >
> > -------------------------------------------------------------------------------
> > - 1 2 3 4 5 6 7
> > -main -----DISCARD-CMD_PACKAGED ( LISTEN DEVICE DEVICE DEVICE RUN )
> > -thread | |
> > - | (page request)
> > - | \___
> > - v \
> > -listen thread: --- page -- page -- page -- page --
> > page --
> > -
> > - a b c
> > -------------------------------------------------------------------------------
> > -
> > -On receipt of CMD_PACKAGED (1)
> > - All the data associated with the package - the ( ... ) section in the
> > -diagram - is read into memory, and the main thread recurses into
> > -qemu_loadvm_state_main to process the contents of the package (2)
> > -which contains commands (3,6) and devices (4...)
> > -
> > -On receipt of 'postcopy listen' - 3 -(i.e. the 1st command in the package)
> > -a new thread (a) is started that takes over servicing the migration stream,
> > -while the main thread carries on loading the package. It loads normal
> > -background page data (b) but if during a device load a fault happens (5)
> > the
> > -returned page (c) is loaded by the listen thread allowing the main threads
> > -device load to carry on.
> > -
> > -The last thing in the CMD_PACKAGED is a 'RUN' command (6) letting the
> > destination
> > -CPUs start running.
> > -At the end of the CMD_PACKAGED (7) the main thread returns to normal
> > running behaviour
> > -and is no longer used by migration, while the listen thread carries
> > -on servicing page data until the end of migration.
> > -
> > -=== Postcopy states ===
> > +::
> > +
> > +
> > ------------------------------------------------------------------------------
> > + 1 2 3 4 5 6 7
> > + main -----DISCARD-CMD_PACKAGED ( LISTEN DEVICE DEVICE DEVICE RUN )
> > + thread | |
> > + | (page request)
> > + | \___
> > + v \
> > + listen thread: --- page -- page -- page -- page --
> > page --
> > +
> > + a b c
> > +
> > ------------------------------------------------------------------------------
> > +
> > +- On receipt of CMD_PACKAGED (1)
> > + All the data associated with the package - the ( ... ) section in the
> > diagram - is read into memory, and the main thread recurses into
> > qemu_loadvm_state_main to process the contents of the package (2) which
> > contains commands (3,6) and devices (4...)
> > +
> > +- On receipt of 'postcopy listen' - 3 -(i.e. the 1st command in the
> > package)
> > + a new thread (a) is started that takes over servicing the migration
> > stream, while the main thread carries on loading the package. It loads
> > normal background page data (b) but if during a device load a fault happens
> > (5) the returned page (c) is loaded by the listen thread allowing the main
> > threads device load to carry on.
> > +
> > +- The last thing in the CMD_PACKAGED is a 'RUN' command (6)
> > + letting the destination CPUs start running. At the end of the
> > CMD_PACKAGED (7) the main thread returns to normal running behaviour and is
> > no longer used by migration, while the listen thread carries on servicing
> > page data until the end of migration.
>
> (here the lines can be wrapped too?)
>
> > +
> > +Postcopy states
> > +---------------
> >
> > Postcopy moves through a series of states (see postcopy_state) from
> > ADVISE->DISCARD->LISTEN->RUNNING->END
> > @@ -516,7 +539,8 @@ ADVISE->DISCARD->LISTEN->RUNNING->END
> > End: The listen thread can now quit, and perform the cleanup of
> > migration
> > state, the migration is now complete.
> >
> > -=== Source side page maps ===
> > +Source side page maps
> > +---------------------
> >
> > The source side keeps two bitmaps during postcopy; 'the migration bitmap'
> > and 'unsent map'. The 'migration bitmap' is basically the same as in
> > @@ -529,6 +553,7 @@ The 'unsent map' is used for the transition to
> > postcopy. It is a bitmap that
> > has a bit cleared whenever a page is sent to the destination, however
> > during
> > the transition to postcopy mode it is combined with the migration bitmap
> > to form a set of pages that:
> > +
> > a) Have been sent but then redirtied (which must be discarded)
> > b) Have not yet been sent - which also must be discarded to cause any
> > transparent huge pages built during precopy to be broken.
> > @@ -540,7 +565,8 @@ request for a page that has already been sent is
> > ignored. Duplicate requests
> > such as this can happen as a page is sent at about the same time the
> > destination accesses it.
> >
> > -=== Postcopy with hugepages ===
> > +Postcopy with hugepages
> > +-----------------------
> >
> > Postcopy now works with hugetlbfs backed memory:
> > a) The linux kernel on the destination must support userfault on
> > hugepages.
> > --
> > 2.14.3
> >
>
> --
> Peter Xu
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK