qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 23/30] hw/net: use the BYTE-based definitions


From: Philippe Mathieu-Daudé
Subject: [Qemu-devel] [PATCH 23/30] hw/net: use the BYTE-based definitions
Date: Thu, 15 Feb 2018 01:28:53 -0300

It ease code review, unit is explicit.

Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
---
 include/hw/net/allwinner_emac.h | 4 ++--
 hw/net/e1000e.c                 | 6 +++---
 hw/net/eepro100.c               | 6 ++----
 3 files changed, 7 insertions(+), 9 deletions(-)

diff --git a/include/hw/net/allwinner_emac.h b/include/hw/net/allwinner_emac.h
index 4cc8aab7ec..93ec0e7067 100644
--- a/include/hw/net/allwinner_emac.h
+++ b/include/hw/net/allwinner_emac.h
@@ -125,8 +125,8 @@
 #define EMAC_INT_RX         (1 << 8)
 
 /* Due to lack of specifications, size of fifos is chosen arbitrarily */
-#define TX_FIFO_SIZE        (4 * 1024)
-#define RX_FIFO_SIZE        (32 * 1024)
+#define TX_FIFO_SIZE        (4 * K_BYTE)
+#define RX_FIFO_SIZE        (32 * K_BYTE)
 
 #define NUM_TX_FIFOS        2
 #define RX_HDR_SIZE         8
diff --git a/hw/net/e1000e.c b/hw/net/e1000e.c
index 16a9417a85..767b35fca8 100644
--- a/hw/net/e1000e.c
+++ b/hw/net/e1000e.c
@@ -81,10 +81,10 @@ typedef struct E1000EState {
 #define E1000E_IO_IDX       2
 #define E1000E_MSIX_IDX     3
 
-#define E1000E_MMIO_SIZE    (128 * 1024)
-#define E1000E_FLASH_SIZE   (128 * 1024)
+#define E1000E_MMIO_SIZE    (128 * K_BYTE)
+#define E1000E_FLASH_SIZE   (128 * K_BYTE)
 #define E1000E_IO_SIZE      (32)
-#define E1000E_MSIX_SIZE    (16 * 1024)
+#define E1000E_MSIX_SIZE    (16 * K_BYTE)
 
 #define E1000E_MSIX_TABLE   (0x0000)
 #define E1000E_MSIX_PBA     (0x2000)
diff --git a/hw/net/eepro100.c b/hw/net/eepro100.c
index a07a63247e..6fdeb05259 100644
--- a/hw/net/eepro100.c
+++ b/hw/net/eepro100.c
@@ -60,8 +60,6 @@
  * changed to pad short packets itself. */
 #define CONFIG_PAD_RECEIVED_FRAMES
 
-#define KiB 1024
-
 /* Debug EEPRO100 card. */
 #if 0
 # define DEBUG_EEPRO100
@@ -104,9 +102,9 @@
 /* Use 64 word EEPROM. TODO: could be a runtime option. */
 #define EEPROM_SIZE     64
 
-#define PCI_MEM_SIZE            (4 * KiB)
+#define PCI_MEM_SIZE            (4 * K_BYTE)
 #define PCI_IO_SIZE             64
-#define PCI_FLASH_SIZE          (128 * KiB)
+#define PCI_FLASH_SIZE          (128 * K_BYTE)
 
 #define BITS(n, m) (((0xffffffffU << (31 - n)) >> (31 - n + m)) << m)
 
-- 
2.16.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]