[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v4 2/2] tpm: extend TPM TIS with state migration
From: |
Marc-André Lureau |
Subject: |
Re: [Qemu-devel] [PATCH v4 2/2] tpm: extend TPM TIS with state migration support |
Date: |
Fri, 2 Mar 2018 10:40:53 +0100 |
Hi
On Thu, Mar 1, 2018 at 8:59 PM, Stefan Berger
<address@hidden> wrote:
> Extend the TPM TIS interface with state migration support.
>
> We need to synchronize with the backend thread to make sure that a command
> being processed by the external TPM emulator has completed and its
> response been received.
>
> Signed-off-by: Stefan Berger <address@hidden>
> ---
> hw/tpm/tpm_tis.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 53 insertions(+), 1 deletion(-)
>
> diff --git a/hw/tpm/tpm_tis.c b/hw/tpm/tpm_tis.c
> index 834eef7..5016d28 100644
> --- a/hw/tpm/tpm_tis.c
> +++ b/hw/tpm/tpm_tis.c
> @@ -902,9 +902,61 @@ static void tpm_tis_reset(DeviceState *dev)
> tpm_backend_startup_tpm(s->be_driver, s->be_buffer_size);
> }
>
> +/* persistent state handling */
> +
> +static int tpm_tis_pre_save(void *opaque)
> +{
> + TPMState *s = opaque;
> + uint8_t locty = s->active_locty;
> +
> + DPRINTF("tpm_tis: suspend: locty = %d : rw_offset = %u\n",
suspend -> pre_save ?
> + locty, s->rw_offset);
> +#ifdef DEBUG_TIS
> + tpm_tis_dump_state(opaque, 0);
> +#endif
To avoid dead code, you could write:
if (DEBUG_TIS) {
...
}
> +
> + /*
> + * Synchronize with backend completion.
> + */
> + tpm_backend_finish_sync(s->be_driver);
> +
> + return 0;
> +}
> +
> +static const VMStateDescription vmstate_locty = {
> + .name = "loc",
I would use a more descriptive name, such as "tpm-tis/locty"
> + .version_id = 1,
> + .minimum_version_id = 0,
It's the first version, make it all 0.
> + .minimum_version_id_old = 0,
not needed
> + .fields = (VMStateField[]) {
> + VMSTATE_UINT32(state, TPMLocality),
> + VMSTATE_UINT32(inte, TPMLocality),
> + VMSTATE_UINT32(ints, TPMLocality),
> + VMSTATE_UINT8(access, TPMLocality),
> + VMSTATE_UINT32(sts, TPMLocality),
> + VMSTATE_UINT32(iface_id, TPMLocality),
> + VMSTATE_END_OF_LIST(),
> + }
> +};
> +
> static const VMStateDescription vmstate_tpm_tis = {
> .name = "tpm",
It's time to use a more specific name "tpm-tis" ?
> - .unmigratable = 1,
> + .version_id = 1,
> + .minimum_version_id = 0,
It's the first version, make it all 0.
> + .minimum_version_id_old = 0,
not needed
> + .pre_save = tpm_tis_pre_save,
> + .fields = (VMStateField[]) {
> + VMSTATE_BUFFER(buffer, TPMState),
> + VMSTATE_UINT16(rw_offset, TPMState),
> + VMSTATE_UINT8(active_locty, TPMState),
> + VMSTATE_UINT8(aborting_locty, TPMState),
> + VMSTATE_UINT8(next_locty, TPMState),
> +
> + VMSTATE_STRUCT_ARRAY(loc, TPMState, TPM_TIS_NUM_LOCALITIES, 1,
> + vmstate_locty, TPMLocality),
> +
> + VMSTATE_END_OF_LIST()
> + }
> };
>
> static Property tpm_tis_properties[] = {
> --
> 2.5.5
>
>
looks good otherwise
--
Marc-André Lureau
Re: [Qemu-devel] [PATCH v4 1/2] tpm: extend TPM emulator with state migration support, Marc-André Lureau, 2018/03/28
[Qemu-devel] [PATCH v4 2/2] tpm: extend TPM TIS with state migration support, Stefan Berger, 2018/03/01
Re: [Qemu-devel] [PATCH v4 0/2] tpm: Extend TPM with state migration support, Stefan Berger, 2018/03/01