[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 08/31] aspeed: add the pc9552 chips to the witherspoo
From: |
Peter Maydell |
Subject: |
[Qemu-devel] [PULL 08/31] aspeed: add the pc9552 chips to the witherspoon machine |
Date: |
Fri, 8 Jun 2018 13:44:54 +0100 |
From: Cédric Le Goater <address@hidden>
The pca9552 LED blinkers on the Witherspoon machine are used for leds
but also as GPIOs to control fans and GPUs.
Signed-off-by: Cédric Le Goater <address@hidden>
Reviewed-by: Andrew Jeffery <address@hidden>
Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
Message-id: address@hidden
Signed-off-by: Peter Maydell <address@hidden>
---
hw/arm/aspeed.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 5d0ed3391e0..bb9d33848d3 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -384,6 +384,8 @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
AspeedSoCState *soc = &bmc->soc;
uint8_t *eeprom_buf = g_malloc0(8 * 1024);
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552",
0x60);
+
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c);
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c);
@@ -396,6 +398,8 @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51,
eeprom_buf);
+ i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552",
+ 0x60);
}
static void witherspoon_bmc_init(MachineState *machine)
--
2.17.1
- [Qemu-devel] [PULL 00/31] target-arm queue, Peter Maydell, 2018/06/08
- [Qemu-devel] [PULL 10/31] ftgmac100: add IEEE 802.1Q VLAN support, Peter Maydell, 2018/06/08
- [Qemu-devel] [PULL 11/31] ftgmac100: fix multicast hash routine, Peter Maydell, 2018/06/08
- [Qemu-devel] [PULL 08/31] aspeed: add the pc9552 chips to the witherspoon machine,
Peter Maydell <=
- [Qemu-devel] [PULL 13/31] hw/arm: Remove the deprecated xlnx-ep108 machine, Peter Maydell, 2018/06/08
- [Qemu-devel] [PULL 06/31] aspeed: Add EEPROM I2C devices, Peter Maydell, 2018/06/08
- [Qemu-devel] [PULL 05/31] smbus: add a smbus_eeprom_init_one() routine, Peter Maydell, 2018/06/08
- [Qemu-devel] [PULL 04/31] aspeed: add an I2C RTC device to all machines, Peter Maydell, 2018/06/08
- [Qemu-devel] [PULL 12/31] ftgmac100: remove check on runt messages, Peter Maydell, 2018/06/08
- [Qemu-devel] [PULL 03/31] aspeed: add support for the witherspoon-bmc board, Peter Maydell, 2018/06/08
- [Qemu-devel] [PULL 09/31] ftgmac100: compute maximum frame size depending on the protocol, Peter Maydell, 2018/06/08
- [Qemu-devel] [PULL 18/31] ppc/pnv: Add trailing '\n' to qemu_log() calls, Peter Maydell, 2018/06/08
- [Qemu-devel] [PULL 14/31] hw/i2c: Add trace events, Peter Maydell, 2018/06/08
- [Qemu-devel] [PULL 16/31] hw/digic: Add trailing '\n' to qemu_log() calls, Peter Maydell, 2018/06/08