[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 1471904] Re: qemu fails under NeXTStep 3.3 when access
From: |
Thomas Huth |
Subject: |
[Qemu-devel] [Bug 1471904] Re: qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter am53c974 |
Date: |
Tue, 26 Jun 2018 16:43:03 -0000 |
** Changed in: qemu
Status: Incomplete => Triaged
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1471904
Title:
qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter
am53c974
Status in QEMU:
Triaged
Bug description:
I try to do a fresh install of NeXTStep 3.3 on qemu. After all install
floppies are successfully read in, the installation shall start, but
aborts right away. During installation process the SCSI host adapter
is correctly detected. I don't know, if these adapter where equipped
with some special ROM. I thought of installing NeXTStep on a SCSI
system due to the IDE problems already known under #1276879. If
necessary I would use gdb to track more into this.
System info:
Linux prerow 3.11.10-29-desktop #1 SMP PREEMPT Thu Mar 5 16:24:00 UTC 2015
(338c513) x86_64 x86_64 x86_64 GNU/Linux
NAME=openSUSE
VERSION="13.1 (Bottle)"
VERSION_ID="13.1"
PRETTY_NAME="openSUSE 13.1 (Bottle) (x86_64)"
qemu commandline parameter:
/usr/bin/qemu-system-i386 \
-cpu pentium \
-monitor stdio \
-k de \
-vga cirrus \
-m 128 \
-localtime \
-drive \
file=.qemu/floppy/3.3_Boot_Disk.floppyimage,format=raw,if=floppy,index=0 \
-drive \
file=.qemu/disk/scsihd-2G.qcow2,format=qcow2,id=scsihd0,if=none \
-drive \
file=.qemu/cdrom/3.3_InstallCD-NeXTIntel.cdromimage,format=raw,id=scsicd0,if=none
\
-net \
none \
-device \
am53c974,id=AMD0 \
-device \
scsi-cd,drive=scsicd0,bus=AMD0.0,lun=0,scsi-id=1,physical_block_size=512,logical_block_size=512
\
-device \
scsi-hd,drive=scsihd0,bus=AMD0.0,lun=0,scsi-id=0,removable=off,secs=125,heads=8,cyls=4176,product="ST32151N
",vendor="Seagate
",serial="89683587",ver="2356",physical_block_size=512,logical_block_size=512,dpofua=off
qemu error message:
qemu: fatal: Trying to execute code outside RAM or ROM at 0xc01754a8
EAX=000000ff EBX=0000fffb ECX=000000ff EDX=000000a1
ESI=00000009 EDI=00011010 EBP=0000ff84 ESP=0000ff6c
EIP=001754a8 EFL=00000007 [-----PC] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
CS =0008 c0000000 3fffffff 00c39a00 DPL=0 CS32 [-R-]
SS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
DS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
FS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
GS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT= 001c9a58 000000ff
IDT= 001c9bac 000007ff
CR0=00000033 CR2=00000000 CR3=00000000 CR4=00000000
DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000
DR6=ffff0ff0 DR7=00000400
CCS=00000001 CCD=0000000c CCO=INCL
EFER=0000000000000000
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80
FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
XMM00=00000000000000000000000000000000 XMM01=00000000000000000000000000000000
XMM02=00000000000000000000000000000000 XMM03=00000000000000000000000000000000
XMM04=00000000000000000000000000000000 XMM05=00000000000000000000000000000000
XMM06=00000000000000000000000000000000 XMM07=00000000000000000000000000000000
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1471904/+subscriptions