Re: [Qemu-devel] [PATCH for-3.0 0/9] migration: postcopy recovery unit test, bug fixes

[Balamuruhan S]

On Fri, Jul 06, 2018 at 11:56:59AM +0100, Dr. David Alan Gilbert wrote:
> * Dr. David Alan Gilbert (address@hidden) wrote:
> > * Peter Xu (address@hidden) wrote:
> > > Based-on: <address@hidden>
> > > 
> > > Based on the series to unbreak postcopy:
> > >   Subject: [PATCH v3 0/4] migation: unbreak postcopy recovery
> > >   Message-Id: <address@hidden>
> > > 
> > > This series introduce a new postcopy recovery test.  The new test
> > > actually helped me to identify two bugs there so fix them as well
> > > before 3.0 release.
> > > 
> > > Patch 1: a trivial cleanup for existing postcopy ram load, which I
> > >          found a bit confusing during debugging the problem.
> > > 
> > > Patch 2-3: two bug fixes that address different issues.  Please see
> > >            the commit log for more information.
> > > 
> > > Patch 4-9: add the postcopy recovery unit test.
> > > 
> > > Please review.  Thanks,
> > 
> > Queued
> 
> Hi Peter,
>   There's a problem in there somewhere;  I'm getting
> an intermittent failure of the test if I run a make check -j 8    on my
> laptop.  Just running two copies of tests/migration-test in parallel
> sometimes triggers it (but not if I turn on QTEST_LOG!).
> But it's always failing with:
> 
>   
> ERROR:/home/dgilbert/git/migpull/tests/migration-test.c:373:migrate_recover: 
> assertion failed: (qdict_haskey(rsp, "return"))
> 
> Dave

Hi Peter, Dave,

I have applied this patchset in upstream Qemu to test postcopy
pause/recovery.

I observed error after triggering recovery command from source monitor
where the target is lost and the source remains to be in `postcopy-pause`
state.

Please find my observation below,

Source:

# ppc64-softmmu/qemu-system-ppc64 --enable-kvm --nographic -vga none -machine \
pseries -m 64G,slots=128,maxmem=128G -smp 16,maxcpus=32 -device 
virtio-blk-pci,drive=rootdisk \
-drive 
file=/home/hostos-ppc64le.qcow2,if=none,cache=none,format=qcow2,id=rootdisk \
-monitor telnet:127.0.0.1:1234,server,nowait -net nic,model=virtio -net user \
-redir tcp:2000::22

qemu-system-ppc64: Detected IO failure for postcopy. Migration paused.

Source Monitor:

(qemu) migrate_set_capability postcopy-ram on
(qemu) migrate_set_parameter max-postcopy-bandwidth 4096
(qemu) migrate -d tcp:127.0.0.1:4444
(qemu) migrate_start_postcopy
(qemu) migrate_pause
(qemu) migrate -r tcp:127.0.0.1:4446

After triggering recovery, target is lost with the error mentioned below
and source remains to be in `postcopy-paused` state

(qemu) info migrate
globals:
store-global-state: on
only-migratable: off
send-configuration: on
send-section-footer: on
decompress-error-check: on
capabilities: xbzrle: off rdma-pin-all: off auto-converge: off
zero-blocks: off \
compress: off events: off postcopy-ram: on x-colo: off release-ram: off
block: off return-path: off pause-before-switchover: off x-multifd: off \
dirty-bitmaps: off
postcopy-blocktime: off late-block-activate: off 
Migration status: postcopy-recover
total time: 78818 milliseconds
expected downtime: 300 milliseconds
setup: 169 milliseconds
transferred ram: 177749 kbytes
throughput: 63.72 mbps
remaining ram: 28061376 kbytes
total ram: 67109120 kbytes
duplicate: 9742102 pages
skipped: 0 pages
normal: 22986 pages
normal bytes: 91944 kbytes
dirty sync count: 2
page size: 4 kbytes
multifd bytes: 0 kbytes
dirty pages rate: 1273187 pages
postcopy request count: 236


Target:

# ppc64-softmmu/qemu-system-ppc64 --enable-kvm --nographic -vga none -machine \
pseries -m 64G,slots=128,maxmem=128G -smp 16,maxcpus=32 -device 
virtio-blk-pci,drive=rootdisk \
-drive 
file=/home/bala/sharing/hostos-ppc64le.qcow2,if=none,cache=none,format=qcow2,id=rootdisk
 \
-monitor telnet:127.0.0.1:1235,server,nowait -net nic,model=virtio -net user \
-redir tcp:2001::22 -incoming tcp:127.0.0.1:4444


qemu-system-ppc64: check_section_footer: Read section footer failed: -5
qemu-system-ppc64: Detected IO failure for postcopy. Migration paused.
qemu-system-ppc64: Not a migration stream
qemu-system-ppc64: load of migration failed: Invalid argument


Target Monitor:

(qemu) migrate_set_capability postcopy-ram on
(qemu) migrate_recover tcp:127.0.0.1:4446
(qemu) Connection closed by foreign host.

QTest:

Also with respect to Qtest, I have tested it and the recovery test
doesn't complete as it waits on the source for "completed" but due to this
issue source remains to be in `postcopy-paused`

`migrate_postcopy_complete(from, to);`

but it actually doesn't end.

As it did not complete, I cancelled it forcefully

# time QTEST_QEMU_BINARY=./ppc64-softmmu/qemu-system-ppc64 
./tests/migration-test
/ppc64/migration/deprecated: OK
/ppc64/migration/bad_dest: OK
/ppc64/migration/postcopy/unix: OK
/ppc64/migration/postcopy/recovery: ^C

real    21m55.176s
user    2m28.800s
sys 4m55.980s

-- Bala
> 
> > > Peter Xu (9):
> > >   migration: simplify check to use qemu file buffer
> > >   migration: loosen recovery check when load vm
> > >   migration: fix incorrect bitmap size calculation
> > >   tests: introduce migrate_postcopy_* helpers
> > >   tests: allow migrate() to take extra flags
> > >   tests: introduce migrate_query*() helpers
> > >   tests: introduce wait_for_migration_status()
> > >   tests: add postcopy recovery test
> > >   tests: hide stderr for postcopy recovery test
> > > 
> > >  migration/ram.c        |  21 +++--
> > >  migration/savevm.c     |  16 ++--
> > >  tests/migration-test.c | 198 ++++++++++++++++++++++++++++++++---------
> > >  3 files changed, 176 insertions(+), 59 deletions(-)
> > > 
> > > -- 
> > > 2.17.1
> > > 
> > > 
> > --
> > Dr. David Alan Gilbert / address@hidden / Manchester, UK
> --
> Dr. David Alan Gilbert / address@hidden / Manchester, UK
>