[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH] arm: Add ARMv6-M programmer's model support
From: |
Julia Suvorova |
Subject: |
[Qemu-devel] [PATCH] arm: Add ARMv6-M programmer's model support |
Date: |
Fri, 13 Jul 2018 13:30:59 +0300 |
Forbid stack alignment change. (CCR)
Reserve FAULTMASK, BASEPRI registers.
Report any fault as HardFault. Disable MemManage, BusFault and
UsageFault, so they always escalated to HardFault. (SHCSR)
Signed-off-by: Julia Suvorova <address@hidden>
---
This is the last cortex-m0 patch.
hw/intc/armv7m_nvic.c | 10 ++++++++++
target/arm/cpu.c | 10 ++++++++++
target/arm/helper.c | 13 +++++++++++--
3 files changed, 31 insertions(+), 2 deletions(-)
diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c
index dbc0061b2d..5eec07342e 100644
--- a/hw/intc/armv7m_nvic.c
+++ b/hw/intc/armv7m_nvic.c
@@ -885,6 +885,9 @@ static uint32_t nvic_readl(NVICState *s, uint32_t offset,
MemTxAttrs attrs)
val |= cpu->env.v7m.ccr[M_REG_NS] & R_V7M_CCR_BFHFNMIGN_MASK;
return val;
case 0xd24: /* System Handler Control and State (SHCSR) */
+ if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) {
+ goto bad_offset;
+ }
val = 0;
if (attrs.secure) {
if (s->sec_vectors[ARMV7M_EXCP_MEM].active) {
@@ -1322,6 +1325,10 @@ static void nvic_writel(NVICState *s, uint32_t offset,
uint32_t value,
cpu->env.v7m.scr[attrs.secure] = value;
break;
case 0xd14: /* Configuration Control. */
+ if (!arm_feature(&cpu->env, ARM_FEATURE_M_MAIN)) {
+ goto bad_offset;
+ }
+
/* Enforce RAZ/WI on reserved and must-RAZ/WI bits */
value &= (R_V7M_CCR_STKALIGN_MASK |
R_V7M_CCR_BFHFNMIGN_MASK |
@@ -1346,6 +1353,9 @@ static void nvic_writel(NVICState *s, uint32_t offset,
uint32_t value,
cpu->env.v7m.ccr[attrs.secure] = value;
break;
case 0xd24: /* System Handler Control and State (SHCSR) */
+ if (!arm_feature(&cpu->env, ARM_FEATURE_V7)) {
+ goto bad_offset;
+ }
if (attrs.secure) {
s->sec_vectors[ARMV7M_EXCP_MEM].active = (value & (1 << 0)) != 0;
/* Secure HardFault active bit cannot be written */
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index a914ce4e8c..3788cb773d 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -220,6 +220,11 @@ static void arm_cpu_reset(CPUState *s)
env->v7m.aircr = R_V7M_AIRCR_BFHFNMINS_MASK;
}
+ if (!arm_feature(env, ARM_FEATURE_V7)) {
+ env->v7m.ccr[M_REG_NS] = 0x3f8;
+ env->v7m.ccr[M_REG_S] = 0x3f8;
+ }
+
/* In v7M the reset value of this bit is IMPDEF, but ARM recommends
* that it resets to 1, so QEMU always does that rather than making
* it dependent on CPU model. In v8M it is RES1.
@@ -230,6 +235,11 @@ static void arm_cpu_reset(CPUState *s)
/* in v8M the NONBASETHRDENA bit [0] is RES1 */
env->v7m.ccr[M_REG_NS] |= R_V7M_CCR_NONBASETHRDENA_MASK;
env->v7m.ccr[M_REG_S] |= R_V7M_CCR_NONBASETHRDENA_MASK;
+
+ if (!arm_feature(env, ARM_FEATURE_M_MAIN)) {
+ env->v7m.ccr[M_REG_NS] |= R_V7M_CCR_UNALIGN_TRP_MASK;
+ env->v7m.ccr[M_REG_S] |= R_V7M_CCR_UNALIGN_TRP_MASK;
+ }
}
/* Unlike A/R profile, M profile defines the reset LR value */
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 2e45dda4e1..fdb481a51d 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -10670,13 +10670,13 @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t
maskreg, uint32_t val)
env->v7m.primask[M_REG_NS] = val & 1;
return;
case 0x91: /* BASEPRI_NS */
- if (!env->v7m.secure) {
+ if (!env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_MAIN)) {
return;
}
env->v7m.basepri[M_REG_NS] = val & 0xff;
return;
case 0x93: /* FAULTMASK_NS */
- if (!env->v7m.secure) {
+ if (!env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_MAIN)) {
return;
}
env->v7m.faultmask[M_REG_NS] = val & 1;
@@ -10760,9 +10760,15 @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t
maskreg, uint32_t val)
env->v7m.primask[env->v7m.secure] = val & 1;
break;
case 17: /* BASEPRI */
+ if (!arm_feature(env, ARM_FEATURE_M_MAIN)) {
+ goto bad_reg;
+ }
env->v7m.basepri[env->v7m.secure] = val & 0xff;
break;
case 18: /* BASEPRI_MAX */
+ if (!arm_feature(env, ARM_FEATURE_M_MAIN)) {
+ goto bad_reg;
+ }
val &= 0xff;
if (val != 0 && (val < env->v7m.basepri[env->v7m.secure]
|| env->v7m.basepri[env->v7m.secure] == 0)) {
@@ -10770,6 +10776,9 @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t
maskreg, uint32_t val)
}
break;
case 19: /* FAULTMASK */
+ if (!arm_feature(env, ARM_FEATURE_M_MAIN)) {
+ goto bad_reg;
+ }
env->v7m.faultmask[env->v7m.secure] = val & 1;
break;
case 20: /* CONTROL */
--
2.17.1
- [Qemu-devel] [PATCH] arm: Add ARMv6-M programmer's model support,
Julia Suvorova <=