[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v5 10/14] tests/microbit-test: Add Tests for nRF51 G
From: |
Steffen Görtz |
Subject: |
[Qemu-devel] [PATCH v5 10/14] tests/microbit-test: Add Tests for nRF51 GPIO |
Date: |
Mon, 12 Nov 2018 16:42:20 -0500 |
The test suite for the nRF51 GPIO peripheral for now
only tests initial state. Additionally a set of
tests testing an implementation detail of the model
are included.
Signed-off-by: Steffen Görtz <address@hidden>
Reviewed-by: Stefan Hajnoczi <address@hidden>
---
tests/microbit-test.c | 124 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 124 insertions(+)
diff --git a/tests/microbit-test.c b/tests/microbit-test.c
index 40b8b4bc64..e606221b58 100644
--- a/tests/microbit-test.c
+++ b/tests/microbit-test.c
@@ -20,6 +20,7 @@
#include "hw/arm/nrf51.h"
#include "hw/nvram/nrf51_nvm.h"
+#include "hw/gpio/nrf51_gpio.h"
#define FLASH_SIZE (256 * NRF51_PAGE_SIZE)
@@ -116,6 +117,128 @@ static void test_nrf51_nvmc(void)
}
}
+static void test_nrf51_gpio(void)
+{
+ size_t i;
+ uint32_t actual, expected;
+
+ struct {
+ hwaddr addr;
+ uint32_t expected;
+ } const reset_state[] = {
+ {NRF51_GPIO_REG_OUT, 0x00000000}, {NRF51_GPIO_REG_OUTSET, 0x00000000},
+ {NRF51_GPIO_REG_OUTCLR, 0x00000000}, {NRF51_GPIO_REG_IN, 0x00000000},
+ {NRF51_GPIO_REG_DIR, 0x00000000}, {NRF51_GPIO_REG_DIRSET, 0x00000000},
+ {NRF51_GPIO_REG_DIRCLR, 0x00000000}
+ };
+
+ /* Check reset state */
+ for (i = 0; i < ARRAY_SIZE(reset_state); i++) {
+ expected = reset_state[i].expected;
+ actual = readl(NRF51_GPIO_BASE + reset_state[i].addr);
+ g_assert_cmpuint(actual, ==, expected);
+ }
+
+ for (i = 0; i < NRF51_GPIO_PINS; i++) {
+ expected = 0x00000002;
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START + i * 4);
+ g_assert_cmpuint(actual, ==, expected);
+ }
+
+ /* Check dir bit consistency between dir and cnf */
+ /* Check set via DIRSET */
+ expected = 0x80000001;
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIRSET, expected);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR);
+ g_assert_cmpuint(actual, ==, expected);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x01);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x01);
+
+ /* Check clear via DIRCLR */
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIRCLR, 0x80000001);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR);
+ g_assert_cmpuint(actual, ==, 0x00000000);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x00);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x00);
+
+ /* Check set via DIR */
+ expected = 0x80000001;
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR, expected);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR);
+ g_assert_cmpuint(actual, ==, expected);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x01);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x01);
+
+ /* Reset DIR */
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR, 0x00000000);
+
+ /* Check Input propagates */
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x00);
+ qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x00);
+ qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 1);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x01);
+ qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, -1);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x01);
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
+
+ /* Check pull-up working */
+ qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x00);
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b1110);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x01);
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
+
+ /* Check pull-down working */
+ qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 1);
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x01);
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0110);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x00);
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
+ qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, -1);
+
+ /* Check Output propagates */
+ irq_intercept_out("/machine/nrf51");
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0011);
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01);
+ g_assert_true(get_irq(0));
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTCLR, 0x01);
+ g_assert_false(get_irq(0));
+
+ /* Check self-stimulation */
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b01);
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x01);
+
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTCLR, 0x01);
+ actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+ g_assert_cmpuint(actual, ==, 0x00);
+
+ /*
+ * Check short-circuit - generates an guest_error which must be checked
+ * manually as long as qtest can not scan qemu_log messages
+ */
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b01);
+ writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01);
+ qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
+}
+
int main(int argc, char **argv)
{
int ret;
@@ -125,6 +248,7 @@ int main(int argc, char **argv)
global_qtest = qtest_initf("-machine microbit");
qtest_add_func("/microbit/nrf51/nvmc", test_nrf51_nvmc);
+ qtest_add_func("/microbit/nrf51/gpio", test_nrf51_gpio);
ret = g_test_run();
--
2.19.1
- Re: [Qemu-devel] [PATCH v5 07/14] tests: Add bbc:microbit / nRF51 test suite, (continued)
- [Qemu-devel] [PATCH v5 05/14] hw/nvram/nrf51_nvm: Add nRF51 non-volatile memories, Steffen Görtz, 2018/11/12
- [Qemu-devel] [PATCH v5 04/14] arm: Instantiate NRF51 random number generator, Steffen Görtz, 2018/11/12
- [Qemu-devel] [PATCH v5 03/14] hw/misc/nrf51_rng: Add NRF51 random number generator peripheral, Steffen Görtz, 2018/11/12
- [Qemu-devel] [PATCH v5 06/14] arm: Instantiate NRF51 special NVM's and NVMC, Steffen Görtz, 2018/11/12
- [Qemu-devel] [PATCH v5 08/14] hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral, Steffen Görtz, 2018/11/12
- [Qemu-devel] [PATCH v5 02/14] arm: Add header to host common definition for nRF51 SOC peripherals, Steffen Görtz, 2018/11/12
- [Qemu-devel] [PATCH v5 10/14] tests/microbit-test: Add Tests for nRF51 GPIO,
Steffen Görtz <=
- [Qemu-devel] [PATCH v5 09/14] arm: Instantiate NRF51 general purpose I/O, Steffen Görtz, 2018/11/12
- [Qemu-devel] [PATCH v5 13/14] tests/microbit-test: Add Tests for nRF51 Timer, Steffen Görtz, 2018/11/12
- [Qemu-devel] [PATCH v5 11/14] hw/timer/nrf51_timer: Add nRF51 Timer peripheral, Steffen Görtz, 2018/11/12
- [Qemu-devel] [PATCH v5 12/14] arm: Instantiate NRF51 Timers, Steffen Görtz, 2018/11/12
- [Qemu-devel] [PATCH v5 14/14] arm: Add Clock peripheral stub to NRF51 SOC, Steffen Görtz, 2018/11/12
- Re: [Qemu-devel] [PATCH v5 00/14] arm: nRF51 Devices and Microbit Support, no-reply, 2018/11/13
- Re: [Qemu-devel] [PATCH v5 00/14] arm: nRF51 Devices and Microbit Support, no-reply, 2018/11/13
- Re: [Qemu-devel] [PATCH v5 00/14] arm: nRF51 Devices and Microbit Support, Peter Maydell, 2018/11/16