[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v3 0/4] QEMU changes to do PVH boot
From: |
Liam Merwick |
Subject: |
[Qemu-devel] [PATCH v3 0/4] QEMU changes to do PVH boot |
Date: |
Tue, 15 Jan 2019 12:18:02 +0000 |
For certain applications it is desirable to rapidly boot a KVM virtual
machine. In cases where legacy hardware and software support within the
guest is not needed, QEMU should be able to boot directly into the
uncompressed Linux kernel binary with minimal firmware involvement.
There already exists an ABI to allow this for Xen PVH guests and the ABI
is supported by Linux and FreeBSD:
https://xenbits.xen.org/docs/unstable/misc/pvh.html
Details on the Linux changes (in 4.21): https://lkml.org/lkml/2018/12/14/1330
qboot pull request integrated: https://github.com/bonzini/qboot/pull/17
This patch series provides QEMU support to read the ELF header of an
uncompressed kernel binary and get the 32-bit PVH kernel entry point
from an ELF Note. In load_linux() a call is made to load_elfboot()
so see if the header matches that of an uncompressed kernel binary (ELF)
and if so, loads the binary and determines the kernel entry address
from an ELF Note in the binary. Then qboot does futher initialisation
of the guest (e820, etc.) and jumps to the kernel entry address and
boots the guest.
changes v1 -> v2
- Based on feedback from Stefan Hajnoczi
- The reading of the PVH entry point is now done in a single pass during
elf_load() which results in Patch2 in v1 being split into Patches 1&2 in v2
and considerably reworked.
- Patch1 adds a new optional function pointer to parse the ELF note type
(the type is passed in via the existing translate_opaque arg - the
function already had 11 args so I didn't want to add more than one new arg).
- Patch2 adds a function to elf_ops.h to find an ELF note
matching a specific type
- Patch3 just has a line added to the commit message to state that the Xen
repo is the canonical location
- Patch4 (that does the PVH boot) is mainly equivalent to Patch3 in v1
just minor load_elfboot() changes and the addition of a
read_pvh_start_addr() helper function for load_elf()
changes v2 -> v3
- Based on feedback from Stefan Hajnoczi
- Fix formatting issues where a few tabs snuck in v2
- Moved code to use ELF Note in load_elf() from Patch1 to Patch2
- In load_elf() set data to NULL after g_free() [now in Patch2 following move]
- Added Patch5 containing changes by Stefano Garzarella to support -initrd
Usіng the method/scripts documented by the NEMU team at
https://github.com/intel/nemu/wiki/Measuring-Boot-Latency
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg00200.html
below are some timings measured (vmlinux and bzImage from the same build)
Time to get to kernel start is almost halved (95ṁs -> 48ms)
QEMU + qboot + vmlinux (PVH + 4.20-rc4)
qemu_init_end: 41.550521
fw_start: 41.667139 (+0.116618)
fw_do_boot: 47.448495 (+5.781356)
linux_startup_64: 47.720785 (+0.27229)
linux_start_kernel: 48.399541 (+0.678756)
linux_start_user: 296.952056 (+248.552515)
QEMU + qboot + bzImage:
qemu_init_end: 29.209276
fw_start: 29.317342 (+0.108066)
linux_start_boot: 36.679362 (+7.36202)
linux_startup_64: 94.531349 (+57.851987)
linux_start_kernel: 94.900913 (+0.369564)
linux_start_user: 401.060971 (+306.160058)
QEMU + bzImage:
qemu_init_end: 30.424430
linux_startup_64: 893.770334 (+863.345904)
linux_start_kernel: 894.17049 (+0.400156)
linux_start_user: 1208.679768 (+314.509278)
Liam Merwick (4):
elf: Add optional function ptr to load_elf() to parse ELF notes
elf-ops.h: Add get_elf_note_type()
pvh: Add x86/HVM direct boot ABI header file
pvh: Boot uncompressed kernel using direct boot ABI
hw/alpha/dp264.c | 4 +-
hw/arm/armv7m.c | 3 +-
hw/arm/boot.c | 2 +-
hw/core/generic-loader.c | 2 +-
hw/core/loader.c | 24 ++++---
hw/cris/boot.c | 3 +-
hw/hppa/machine.c | 6 +-
hw/i386/multiboot.c | 2 +-
hw/i386/pc.c | 135 +++++++++++++++++++++++++++++++++++++
hw/lm32/lm32_boards.c | 6 +-
hw/lm32/milkymist.c | 3 +-
hw/m68k/an5206.c | 2 +-
hw/m68k/mcf5208.c | 2 +-
hw/microblaze/boot.c | 7 +-
hw/mips/mips_fulong2e.c | 5 +-
hw/mips/mips_malta.c | 5 +-
hw/mips/mips_mipssim.c | 5 +-
hw/mips/mips_r4k.c | 5 +-
hw/moxie/moxiesim.c | 2 +-
hw/nios2/boot.c | 7 +-
hw/openrisc/openrisc_sim.c | 2 +-
hw/pci-host/prep.c | 2 +-
hw/ppc/e500.c | 3 +-
hw/ppc/mac_newworld.c | 5 +-
hw/ppc/mac_oldworld.c | 5 +-
hw/ppc/ppc440_bamboo.c | 2 +-
hw/ppc/sam460ex.c | 3 +-
hw/ppc/spapr.c | 7 +-
hw/ppc/virtex_ml507.c | 2 +-
hw/riscv/sifive_e.c | 2 +-
hw/riscv/sifive_u.c | 2 +-
hw/riscv/spike.c | 2 +-
hw/riscv/virt.c | 2 +-
hw/s390x/ipl.c | 9 ++-
hw/sparc/leon3.c | 3 +-
hw/sparc/sun4m.c | 6 +-
hw/sparc64/sun4u.c | 4 +-
hw/tricore/tricore_testboard.c | 2 +-
hw/xtensa/sim.c | 12 ++--
hw/xtensa/xtfpga.c | 2 +-
include/elf.h | 10 +++
include/hw/elf_ops.h | 77 ++++++++++++++++++++++
include/hw/loader.h | 9 ++-
include/hw/xen/start_info.h | 146 +++++++++++++++++++++++++++++++++++++++++
44 files changed, 479 insertions(+), 70 deletions(-)
create mode 100644 include/hw/xen/start_info.h
--
1.8.3.1
- [Qemu-devel] [PATCH v3 0/4] QEMU changes to do PVH boot,
Liam Merwick <=
- [Qemu-devel] [PATCH v3 2/5] elf-ops.h: Add get_elf_note_type(), Liam Merwick, 2019/01/15
- [Qemu-devel] [PATCH v3 3/5] pvh: Add x86/HVM direct boot ABI header file, Liam Merwick, 2019/01/15
- [Qemu-devel] [PATCH v3 1/5] elf: Add optional function ptr to load_elf() to parse ELF notes, Liam Merwick, 2019/01/15
- [Qemu-devel] [PATCH v3 4/5] pvh: Boot uncompressed kernel using direct boot ABI, Liam Merwick, 2019/01/15
- [Qemu-devel] [PATCH v3 5/5] pvh: load initrd and expose it through fw_cfg, Liam Merwick, 2019/01/15
- Re: [Qemu-devel] [PATCH v3 0/4] QEMU changes to do PVH boot, Paolo Bonzini, 2019/01/15
- Re: [Qemu-devel] [PATCH v3 0/4] QEMU changes to do PVH boot, no-reply, 2019/01/20