qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 05/10] ppc405_boards: Don't size flash memory to mat


From: Markus Armbruster
Subject: [Qemu-devel] [PATCH 05/10] ppc405_boards: Don't size flash memory to match backing image
Date: Mon, 18 Feb 2019 13:56:10 +0100

Machine "ref405ep" maps its flash memory at address 2^32 - image size.
Image size is rounded up to the next multiple of 64KiB.  Useless,
because pflash_cfi02_realize() fails with "failed to read the initial
flash content" unless the rounding is a no-op.

If the image size exceeds 0x80000 Bytes, we overlap first SRAM, then
other stuff.  No idea how that would play out, but a useful outcomes
seem unlikely.

Map the flash memory at fixed address 0xFFF80000 with size 512KiB,
regardless of image size, to match the physical hardware.

Machine "taihu" maps its boot flash memory similarly.  The code even
has a comment /* XXX: should check that size is 2MB */, followed by
disabled code to adjust the size to 2MiB regardless of image size.

Its code to map its application flash memory looks the same, except
there the XXX comment asks for 32MiB, and the code to adjust the size
isn't disabled.  Note that pflash_cfi02_realize() fails with "failed
to read the initial flash content" for images smaller than 32MiB.

Map the boot flash memory at fixed address 0xFFE00000 with size 2MiB,
to match the physical hardware.  Delete dead code from application
flash mapping, and simplify some.

Cc: David Gibson <address@hidden>
Signed-off-by: Markus Armbruster <address@hidden>
---
 hw/ppc/ppc405_boards.c | 53 +++++++++++++-----------------------------
 1 file changed, 16 insertions(+), 37 deletions(-)

diff --git a/hw/ppc/ppc405_boards.c b/hw/ppc/ppc405_boards.c
index f47b15f10e..728154aebb 100644
--- a/hw/ppc/ppc405_boards.c
+++ b/hw/ppc/ppc405_boards.c
@@ -158,7 +158,7 @@ static void ref405ep_init(MachineState *machine)
     target_ulong kernel_base, initrd_base;
     long kernel_size, initrd_size;
     int linux_boot;
-    int fl_idx, fl_sectors, len;
+    int len;
     DriveInfo *dinfo;
     MemoryRegion *sysmem = get_system_memory();
 
@@ -185,26 +185,19 @@ static void ref405ep_init(MachineState *machine)
 #ifdef DEBUG_BOARD_INIT
     printf("%s: register BIOS\n", __func__);
 #endif
-    fl_idx = 0;
 #ifdef USE_FLASH_BIOS
-    dinfo = drive_get(IF_PFLASH, 0, fl_idx);
+    dinfo = drive_get(IF_PFLASH, 0, 0);
     if (dinfo) {
-        BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
-
-        bios_size = blk_getlength(blk);
-        fl_sectors = (bios_size + 65535) >> 16;
 #ifdef DEBUG_BOARD_INIT
-        printf("Register parallel flash %d size %lx"
-               " at addr %lx '%s' %d\n",
-               fl_idx, bios_size, -bios_size,
-               blk_name(blk), fl_sectors);
+        printf("Register parallel flash\n");
 #endif
-        pflash_cfi02_register((uint32_t)(-bios_size),
+        bios_size = 0x80000;
+        pflash_cfi02_register(0xFFF80000,
                               NULL, "ef405ep.bios", bios_size,
-                              blk, 65536, fl_sectors, 1,
+                              dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
+                              65536, bios_size / 65536, 1,
                               2, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA,
                               1);
-        fl_idx++;
     } else
 #endif
     {
@@ -455,7 +448,7 @@ static void taihu_405ep_init(MachineState *machine)
     target_ulong kernel_base, initrd_base;
     long kernel_size, initrd_size;
     int linux_boot;
-    int fl_idx, fl_sectors;
+    int fl_idx;
     DriveInfo *dinfo;
 
     /* RAM is soldered to the board so the size cannot be changed */
@@ -486,21 +479,14 @@ static void taihu_405ep_init(MachineState *machine)
 #if defined(USE_FLASH_BIOS)
     dinfo = drive_get(IF_PFLASH, 0, fl_idx);
     if (dinfo) {
-        BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
-
-        bios_size = blk_getlength(blk);
-        /* XXX: should check that size is 2MB */
-        //        bios_size = 2 * 1024 * 1024;
-        fl_sectors = (bios_size + 65535) >> 16;
 #ifdef DEBUG_BOARD_INIT
-        printf("Register parallel flash %d size %lx"
-               " at addr %lx '%s' %d\n",
-               fl_idx, bios_size, -bios_size,
-               blk_name(blk), fl_sectors);
+        printf("Register boot flash\n");
 #endif
-        pflash_cfi02_register((uint32_t)(-bios_size),
+        bios_size = 2 * MiB;
+        pflash_cfi02_register(0xFFE00000,
                               NULL, "taihu_405ep.bios", bios_size,
-                              blk, 65536, fl_sectors, 1,
+                              dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
+                              65536, bios_size / 65536, 1,
                               4, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA,
                               1);
         fl_idx++;
@@ -536,20 +522,13 @@ static void taihu_405ep_init(MachineState *machine)
     /* Register Linux flash */
     dinfo = drive_get(IF_PFLASH, 0, fl_idx);
     if (dinfo) {
-        BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
-
-        bios_size = blk_getlength(blk);
-        /* XXX: should check that size is 32MB */
         bios_size = 32 * MiB;
-        fl_sectors = (bios_size + 65535) >> 16;
 #ifdef DEBUG_BOARD_INIT
-        printf("Register parallel flash %d size %lx"
-               " at addr " TARGET_FMT_lx " '%s'\n",
-               fl_idx, bios_size, (target_ulong)0xfc000000,
-               blk_name(blk));
+        printf("Register application flash\n"
 #endif
         pflash_cfi02_register(0xfc000000, NULL, "taihu_405ep.flash", bios_size,
-                              blk, 65536, fl_sectors, 1,
+                              dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
+                              65536, bios_size / 65536, 1,
                               4, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA,
                               1);
         fl_idx++;
-- 
2.17.2




reply via email to

[Prev in Thread] Current Thread [Next in Thread]