--- /dev/fd/63 2018-05-31 09:56:18.719968612 +0200 +++ /dev/fd/62 2018-05-31 09:56:18.729968612 +0200 @@ -1,7 +1,6 @@ -Linux version 4.9.36-1-lts (address@hidden) (gcc version 7.1.1 20170621 (GCC) ) #1 SMP Wed Jul 5 17:34:52 CEST 2017 -Command line: BOOT_IMAGE=/boot/kernel quiet loglevel=2 udev.log-priority=err initrd=/boot/archlinux -x86/fpu: Legacy x87 FPU detected. -x86/fpu: Using 'eager' FPU context switches. +Linux version 4.14.40-1-lts (address@hidden) (gcc version 8.1.0 (GCC)) #1 SMP Wed May 9 13:00:32 CEST 2018 +Command line: BOOT_IMAGE=/boot/kernel quiet loglevel=2 udev.log-priority=err modprobe.blacklist=sr_mod +x86/fpu: x87 FPU will use FXSAVE e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved @@ -16,6 +15,7 @@ SMBIOS 2.8 present. DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Hypervisor detected: KVM +tsc: Fast TSC calibration using PIT e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0x7ffde max_arch_pfn = 0x400000000 @@ -35,15 +35,16 @@ 7 disabled x86/PAT: PAT not supported by CPU. x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC -found SMP MP-table at [mem 0x000f5d40-0x000f5d4f] mapped at [ffff8800000f5d40] +found SMP MP-table at [mem 0x000f5d40-0x000f5d4f] mapped at [ffffffffff200d40] Scanning 1 areas for low memory corruption -Base memory trampoline at [ffff880000099000] 99000 size 24576 -BRK [0x01d59000, 0x01d59fff] PGTABLE -BRK [0x01d5a000, 0x01d5afff] PGTABLE -BRK [0x01d5b000, 0x01d5bfff] PGTABLE -BRK [0x01d5c000, 0x01d5cfff] PGTABLE -BRK [0x01d5d000, 0x01d5dfff] PGTABLE -RAMDISK: [mem 0x7f42f000-0x7ffddfff] +Base memory trampoline at [ffff9ebcc0099000] 99000 size 24576 +BRK [0x5163b000, 0x5163bfff] PGTABLE +BRK [0x5163c000, 0x5163cfff] PGTABLE +BRK [0x5163d000, 0x5163dfff] PGTABLE +BRK [0x5163e000, 0x5163efff] PGTABLE +BRK [0x5163f000, 0x5163ffff] PGTABLE +BRK [0x51640000, 0x51640fff] PGTABLE +RAMDISK: [mem 0x3505b000-0x36824fff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000000F5B60 000014 (v00 BOCHS ) ACPI: RSDT 0x000000007FFE20D6 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) @@ -56,10 +57,10 @@ ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000007ffddfff] -NODE_DATA(0) allocated [mem 0x7f42a000-0x7f42efff] +NODE_DATA(0) allocated [mem 0x7ffda000-0x7ffddfff] kvm-clock: Using msrs 4b564d01 and 4b564d00 -kvm-clock: cpu 0, msr 0:7f428001, primary cpu clock -kvm-clock: using sched offset of 1332430653 cycles +kvm-clock: cpu 0, msr 0:7ffd8001, primary cpu clock +kvm-clock: using sched offset of 1529192959 cycles clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] @@ -101,24 +102,27 @@ e820: [mem 0xc0000000-0xfed1bfff] available for PCI devices Booting paravirtualized kernel on KVM clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns +random: get_random_bytes called from start_kernel+0x93/0x4cc with crng_init=0 setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1 -percpu: Embedded 34 pages/cpu @ffff88007f200000 s102168 r8192 d28904 u2097152 -pcpu-alloc: s102168 r8192 d28904 u2097152 alloc=1*2097152 +percpu: Embedded 42 pages/cpu @ffff9ebd3fc00000 s132440 r8192 d31400 u2097152 +pcpu-alloc: s132440 r8192 d31400 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 KVM setup async PF for cpu 0 -kvm-stealtime: cpu 0, msr 7f20d880 -Built 1 zonelists in Node order, mobility grouping on. Total pages: 515943 +kvm-stealtime: cpu 0, msr 7fc161c0 +Built 1 zonelists, mobility grouping on. Total pages: 515943 Policy zone: DMA32 -Kernel command line: BOOT_IMAGE=/boot/kernel quiet loglevel=2 udev.log-priority=err initrd=/boot/archlinux +Kernel command line: BOOT_IMAGE=/boot/kernel quiet loglevel=2 udev.log-priority=err modprobe.blacklist=sr_mod PID hash table entries: 4096 (order: 3, 32768 bytes) Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! -Memory: 2037892K/2096624K available (6148K kernel code, 1077K rwdata, 1944K rodata, 1280K init, 1032K bss, 58732K reserved, 0K cma-reserved) +Memory: 2016316K/2096624K available (10252K kernel code, 1150K rwdata, 2828K rodata, 1412K init, 988K bss, 80308K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 +Kernel/User page tables isolation: enabled +ftrace: allocating 29092 entries in 114 pages Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 -NR_IRQS:8448 nr_irqs:256 16 +NR_IRQS: 8448, nr_irqs: 256, preallocated irqs: 16 Console: colour VGA+ 80x25 console [tty0] enabled clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns @@ -126,7 +130,7 @@ tsc: Detected 3192.606 MHz processor Calibrating delay loop (skipped) preset value.. 6385.21 BogoMIPS (lpj=31926060) pid_max: default: 32768 minimum: 301 -ACPI: Core revision 20160831 +ACPI: Core revision 20170728 ACPI: 1 ACPI AML tables successfully acquired and loaded Security Framework initialized Yama: becoming mindful. @@ -138,22 +142,28 @@ mce: CPU supports 10 MCE banks Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 -Freeing SMP alternatives memory: 24K (ffffffff81c4f000 - ffffffff81c55000) -ftrace: allocating 24673 entries in 97 pages +Spectre V2 : Mitigation: Full generic retpoline +Freeing SMP alternatives memory: 24K smpboot: Max logical packages: 1 x2apic enabled Switched APIC routing to physical x2apic. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 +APIC calibration not consistent with PM-Timer: 103ms instead of 100ms +APIC delta adjusted to PM-Timer: 6247585 (6444933) smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3) Performance Events: PMU not available due to virtualization, using software events only. -x86: Booted up 1 node, 1 CPUs +Hierarchical SRCU implementation. +NMI watchdog: Perf event create on CPU 0 failed with -2 +NMI watchdog: Perf NMI watchdog permanently disabled +smp: Bringing up secondary CPUs ... +smp: Brought up 1 node, 1 CPU smpboot: Total of 1 processors activated (6385.21 BogoMIPS) devtmpfs: initialized x86/mm: Memory block size: 128MB clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: 2, 16384 bytes) pinctrl core: initialized pinctrl subsystem -RTC time: 7:31:36, date: 05/31/18 +RTC time: 7:27:48, date: 05/31/18 NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu @@ -162,7 +172,7 @@ PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 PCI: Using configuration type 1 for base access -HugeTLB registered 2 MB page size, pre-allocated 0 pages +HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) @@ -171,6 +181,7 @@ ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug +ACPI: Enabled 1 GPEs in block 00 to 3F ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] @@ -223,18 +234,18 @@ ACPI: PCI Interrupt Link [GSIF] (IRQs *21) ACPI: PCI Interrupt Link [GSIG] (IRQs *22) ACPI: PCI Interrupt Link [GSIH] (IRQs *23) -ACPI: Enabled 1 GPEs in block 00 to 3F -vgaarb: setting as boot device: PCI:0000:00:01.0 -vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none +pci 0000:00:01.0: vgaarb: setting as boot VGA device +pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none +pci 0000:00:01.0: vgaarb: bridge control possible vgaarb: loaded -vgaarb: bridge control possible 0000:00:01.0 +EDAC MC: Ver: 3.0.0 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0x7ffde000-0x7fffffff] NetLabel: Initializing NetLabel: domain hash size = 128 -NetLabel: protocols = UNLABELED CIPSOv4 +NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO NetLabel: unlabeled traffic allowed by default HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 @@ -269,41 +280,43 @@ ACPI: PCI Interrupt Link [GSID] enabled at IRQ 19 PCI: CLS 0 bytes, default 64 Unpacking initramfs... -Freeing initrd memory: 11964K (ffff88007f42f000 - ffff88007ffde000) +Freeing initrd memory: 24360K Scanning for low memory corruption every 60 seconds Initialise system trusted keyrings -workingset: timestamp_bits=40 max_order=19 bucket_order=0 +Key type blacklist registered +workingset: timestamp_bits=41 max_order=19 bucket_order=0 zbud: loaded Key type asymmetric registered -Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) +Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered -pci_hotplug: PCI Hot Plug PCI Core version: 0.5 -pciehp: PCI Express Hot Plug Controller Driver version: 0.4 +io scheduler mq-deadline registered +io scheduler kyber registered +io scheduler bfq registered intel_idle: does not run on family 6 model 6 -GHES: HEST is not enabled! Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A -Linux agpgart interface v0.103 rtc_cmos 00:00: RTC can wake from S4 rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs ledtrig-cpu: registered to indicate activity on CPUs +vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized NET: Registered protocol family 10 +Segment Routing with IPv6 NET: Registered protocol family 17 -microcode: sig=0x663, pf=0x1, revision=0x1 -microcode: Microcode Update Driver: v2.01 , Peter Oruba +RAS: Correctable Errors collector initialized. +sched_clock: Marking stable (430864485, 0)->(669394870, -238530385) registered taskstats version 1 Loading compiled-in X.509 certificates zswap: loaded using pool lzo/zbud - Magic number: 2:542:522 -rtc_cmos 00:00: setting system clock to 2018-05-31 07:31:37 UTC (1527751897) -PM: Hibernation image not present or could not be loaded. -Freeing unused kernel memory: 1280K (ffffffff81b0f000 - ffffffff81c4f000) -Write protecting the kernel read-only data: 10240k -Freeing unused kernel memory: 2028K (ffff880001605000 - ffff880001800000) -Freeing unused kernel memory: 104K (ffff8800019e6000 - ffff880001a00000) +Key type big_key registered + Magic number: 2:989:471 +rtc_cmos 00:00: setting system clock to 2018-05-31 07:27:49 UTC (1527751669) +Freeing unused kernel memory: 1412K +Write protecting the kernel read-only data: 16384k +Freeing unused kernel memory: 2016K +Freeing unused kernel memory: 1268K squashfs: version 4.0 (2009/01/31) Phillip Lougher i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 @@ -323,10 +336,22 @@ ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected +uhci_hcd: USB Universal Host Controller Interface driver +uhci_hcd 0000:00:1d.0: UHCI Host Controller +uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 +uhci_hcd 0000:00:1d.0: detected 2 ports +uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c060 +hub 2-0:1.0: USB hub found +hub 2-0:1.0: 2 ports detected +uhci_hcd 0000:00:1d.1: UHCI Host Controller +uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 +uhci_hcd 0000:00:1d.1: detected 2 ports +uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c080 +hub 3-0:1.0: USB hub found +hub 3-0:1.0: 2 ports detected ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq only -uhci_hcd: USB Universal Host Controller Interface driver scsi host0: ahci scsi host1: ahci scsi host2: ahci @@ -339,18 +364,6 @@ ata4: SATA max UDMA/133 abar address@hidden port 0xfebd6280 irq 24 ata5: SATA max UDMA/133 abar address@hidden port 0xfebd6300 irq 24 ata6: SATA max UDMA/133 abar address@hidden port 0xfebd6380 irq 24 -uhci_hcd 0000:00:1d.0: UHCI Host Controller -uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 -uhci_hcd 0000:00:1d.0: detected 2 ports -uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c060 -hub 2-0:1.0: USB hub found -hub 2-0:1.0: 2 ports detected -uhci_hcd 0000:00:1d.1: UHCI Host Controller -uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 -uhci_hcd 0000:00:1d.1: detected 2 ports -uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c080 -hub 3-0:1.0: USB hub found -hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: detected 2 ports @@ -359,82 +372,84 @@ hub 4-0:1.0: 2 ports detected ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100 -ata1.00: 8388608 sectors, multi 16: LBA48 NCQ (depth 31/32) +ata1.00: 1843928 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: applying bridge limits ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 ata2: SATA link down (SStatus 0 SControl 300) -ata5: SATA link down (SStatus 0 SControl 300) -ata6: SATA link down (SStatus 0 SControl 300) -ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 ata3.00: applying bridge limits ata3.00: configured for UDMA/100 scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 -sd 0:0:0:0: [sda] 8388608 512-byte logical blocks: (4.29 GB/4.00 GiB) +ata6: SATA link down (SStatus 0 SControl 300) +ata4: SATA link down (SStatus 0 SControl 300) +ata5: SATA link down (SStatus 0 SControl 300) +sd 0:0:0:0: [sda] 1843928 512-byte logical blocks: (944 MB/900 MiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk -sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray -cdrom: Uniform CD-ROM driver Revision: 3.20 -sr 2:0:0:0: Attached scsi CD-ROM sr0 FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. random: fast init done -tsc: Refined TSC clocksource calibration: 3192.619 MHz -clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050d4b397, max_idle_ns: 440795220806 ns +tsc: Refined TSC clocksource calibration: 3192.618 MHz +clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050c427f6, max_idle_ns: 440795258165 ns device-mapper: uevent: version 1.0.3 -device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: address@hidden +device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: address@hidden loop: module loaded +random: cryptsetup: uninitialized urandom read (2 bytes read) +overlayfs: fs on '/run/archiso/sfs/airootfs' does not support file handles, falling back to index=off. systemd[1]: Module 'ip_tables' is blacklisted -systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) +systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid) systemd[1]: Detected virtualization kvm. systemd[1]: Detected architecture x86-64. systemd[1]: Set hostname to . -systemd[1]: Unnecessary job for /dev/sda2 was removed. systemd[1]: Unnecessary job for /dev/mapper/airootfs was removed. -systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. -systemd[1]: Listening on Journal Socket (/dev/log). +random: systemd: uninitialized urandom read (16 bytes read) +systemd[1]: Created slice User and Session Slice. +random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Reached target Swap. -systemd[1]: Listening on Device-mapper event daemon FIFOs. -systemd-journald[211]: Received request to flush runtime journal from PID 1 +systemd[1]: Listening on udev Control Socket. +systemd[1]: Started Forward Password Requests to Wall Directory Watch. +systemd[1]: Listening on LVM2 metadata daemon socket. +systemd-journald[277]: Received request to flush runtime journal from PID 1 +input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 +ACPI: Power Button [PWRF] +lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized +Linux agpgart interface v0.103 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered +i801_smbus 0000:00:1f.3: SMBus using PCI interrupt +input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input4 +input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22 e1000e 0000:00:02.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode -[drm] Initialized -input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 -ACPI: Power Button [PWRF] -input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input4 -input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3 e1000e 0000:00:02.0 0000:00:02.0 (uninitialized): registered PHC clock +iTCO_vendor_support: vendor-support=0 +mousedev: PS/2 mouse device common for all mice e1000e 0000:00:02.0 eth0: (PCI Express:2.5GT/s:Width x1) 52:54:00:12:34:56 e1000e 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:02.0 eth0: MAC: 3, PHY: 8, PBA No: 000000-000 -i801_smbus 0000:00:1f.3: SMBus using PCI interrupt -lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized +iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 +iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) +iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) +e1000e 0000:00:02.0 enp0s2: renamed from eth0 [drm] Found bochs VGA, ID 0xb0c0. [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd4000. -[TTM] Zone kernel: Available graphics memory: 1026646 kiB +[TTM] Zone kernel: Available graphics memory: 1022698 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator fbcon: bochsdrmfb (fb0) is primary device Console: switching to colour frame buffer device 128x48 bochs-drm 0000:00:01.0: fb0: bochsdrmfb frame buffer device [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:01.0 on minor 0 -mousedev: PS/2 mouse device common for all mice -iTCO_vendor_support: vendor-support=0 -iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 -iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) -iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) -e1000e 0000:00:02.0 enp0s2: renamed from eth0 fuse init (API version 7.26) random: crng init done +random: 7 urandom warning(s) missed due to ratelimiting +8021q: 802.1Q VLAN Support v1.8 IPv6: ADDRCONF(NETDEV_UP): enp0s2: link is not ready -e1000e: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx -IPv6: ADDRCONF(NETDEV_CHANGE): enp0s2: link becomes ready +8021q: adding VLAN 0 to HW filter on device enp0s2