[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [qemu-s390x] [PATCH 3/3] s390: Do not pass inofficial IPL type to th
From: |
Viktor VM Mihajlovski |
Subject: |
Re: [qemu-s390x] [PATCH 3/3] s390: Do not pass inofficial IPL type to the guest |
Date: |
Fri, 6 Apr 2018 12:43:08 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.7.0 |
On 06.04.2018 11:28, Thomas Huth wrote:
> On 05.04.2018 17:07, Viktor Mihajlovski wrote:
>> IPL over a virtio-scsi device requires special handling not
>> available in the real architecture. For this purpose the IPL
>> type 0xFF has been chosen as means of communication between
>> QEMU and the pc-bios. However, a guest OS could be confused
>> by seeing an unknown IPL type.
>>
>> This change sets the IPL parameter type to 0x02 (CCW) to prevent
>> this. Pre-existing Linux has looked up the IPL parameters only in
>> the case of FCP IPL. This means that the behavior should stay
>> the same even if Linux checks for the IPL type unconditionally.
>>
>> Signed-off-by: Viktor Mihajlovski <address@hidden>
>> ---
>> pc-bios/s390-ccw/bootmap.c | 7 +++++++
>> pc-bios/s390-ccw/iplb.h | 15 +++++++++++++--
>> 2 files changed, 20 insertions(+), 2 deletions(-)
>>
>> diff --git a/pc-bios/s390-ccw/bootmap.c b/pc-bios/s390-ccw/bootmap.c
>> index fc2a9fe..9287b7a 100644
>> --- a/pc-bios/s390-ccw/bootmap.c
>> +++ b/pc-bios/s390-ccw/bootmap.c
>> @@ -70,6 +70,13 @@ static void jump_to_IPL_code(uint64_t address)
>> {
>> /* store the subsystem information _after_ the bootmap was loaded */
>> write_subsystem_identification();
>> +
>> + /* prevent unknown IPL types in the guest */
>> + if (iplb.pbt == S390_IPL_TYPE_QEMU_SCSI) {
>> + iplb.pbt = S390_IPL_TYPE_CCW;
>> + set_iplb(&iplb);
>> + }
>> +
>> /*
>> * The IPL PSW is at address 0. We also must not overwrite the
>> * content of non-BIOS memory after we loaded the guest, so we
>> diff --git a/pc-bios/s390-ccw/iplb.h b/pc-bios/s390-ccw/iplb.h
>> index 7dfce4f..5357a36 100644
>> --- a/pc-bios/s390-ccw/iplb.h
>> +++ b/pc-bios/s390-ccw/iplb.h
>> @@ -97,16 +97,27 @@ extern QemuIplParameters qipl;
>> #define S390_IPL_TYPE_CCW 0x02
>> #define S390_IPL_TYPE_QEMU_SCSI 0xff
>>
>> -static inline bool store_iplb(IplParameterBlock *iplb)
>> +static inline bool manage_iplb(IplParameterBlock *iplb, bool store)
>> {
>> register unsigned long addr asm("0") = (unsigned long) iplb;
>> register unsigned long rc asm("1") = 0;
>>
>> asm volatile ("diag %0,%2,0x308\n"
>> : "+d" (addr), "+d" (rc)
>> - : "d" (6)
>> + : "d" (store ? 6 : 5)
>> : "memory", "cc");
>
> I can't find a proper public specification for diag 308, so no clue how
> to review this properly. Christian, could you please have a look?
>
> Thomas
>
If it helps, here's the respective Linux implementation:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/s390/kernel/ipl.c#n182
--
Regards,
Viktor Mihajlovski
- Re: [qemu-s390x] [PATCH 2/3] s390: Ensure IPL from SCSI works as expected, (continued)