qemu-s390x
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [qemu-s390x] [PATCH 05/15] s390-bios: Factor finding boot device out


From: Farhan Ali
Subject: Re: [qemu-s390x] [PATCH 05/15] s390-bios: Factor finding boot device out of virtio code path
Date: Thu, 31 Jan 2019 08:44:45 -0500
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.4.0



On 01/29/2019 08:29 AM, Jason J. Herne wrote:
Make a new routine find_boot_device to locate the boot device for all
cases. not just virtio.

In one case no boot device is specified and a suitable boot device can not
be auto detected. The error message for this case was specific to virtio
devices. We update this message to remove virtio specific wording.

Signed-off-by: Jason J. Herne <address@hidden>
---
  pc-bios/s390-ccw/main.c  | 87 ++++++++++++++++++++++++++----------------------
  tests/boot-serial-test.c |  2 +-
  2 files changed, 49 insertions(+), 40 deletions(-)

diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index 7e3f65e..2457752 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -55,17 +55,18 @@ unsigned int get_loadparm_index(void)
   * NOTE: The global variable blk_schid is updated to contain the subchannel
   * information.
   */
-static bool find_dev(Schib *schib, int dev_no)
+static bool find_subch(int dev_no)
  {
+    Schib schib;
      int i, r;
for (i = 0; i < 0x10000; i++) {
          blk_schid.sch_no = i;
-        r = stsch_err(blk_schid, schib);
+        r = stsch_err(blk_schid, &schib);
          if ((r == 3) || (r == -EIO)) {
              break;
          }
-        if (!schib->pmcw.dnv) {
+        if (!schib.pmcw.dnv) {
              continue;
          }
@@ -77,7 +78,7 @@ static bool find_dev(Schib *schib, int dev_no)
              continue;
          }
- if ((dev_no < 0) || (schib->pmcw.dev == dev_no)) {
+        if ((dev_no < 0) || (schib.pmcw.dev == dev_no)) {
              return true;
          }
      }
@@ -133,56 +134,63 @@ static void boot_setup(void)
      have_iplb = store_iplb(&iplb);
  }
-static void virtio_setup(void)
+static void find_boot_device(void)
  {
-    Schib schib;
-    int ssid;
-    bool found = false;
-    uint16_t dev_no;
      VDev *vdev = virtio_get_device();
-    QemuIplParameters *early_qipl = (QemuIplParameters *)QIPL_ADDRESS;
-
-    memcpy(&qipl, early_qipl, sizeof(QemuIplParameters));
+    int ssid;
+    bool found;
- if (have_iplb) {
-        switch (iplb.pbt) {
-        case S390_IPL_TYPE_CCW:
-            dev_no = iplb.ccw.devno;
-            debug_print_int("device no. ", dev_no);
-            blk_schid.ssid = iplb.ccw.ssid & 0x3;
-            debug_print_int("ssid ", blk_schid.ssid);
-            found = find_dev(&schib, dev_no);
-            break;
-        case S390_IPL_TYPE_QEMU_SCSI:
-            vdev->scsi_device_selected = true;
-            vdev->selected_scsi_device.channel = iplb.scsi.channel;
-            vdev->selected_scsi_device.target = iplb.scsi.target;
-            vdev->selected_scsi_device.lun = iplb.scsi.lun;
-            blk_schid.ssid = iplb.scsi.ssid & 0x3;
-            found = find_dev(&schib, iplb.scsi.devno);
-            break;
-        default:
-            panic("List-directed IPL not supported yet!\n");
-        }
-        menu_setup();
-    } else {
+    if (!have_iplb) {
          for (ssid = 0; ssid < 0x3; ssid++) {
              blk_schid.ssid = ssid;
-            found = find_dev(&schib, -1);
+            found = find_subch(-1);
              if (found) {
-                break;
+                return;
              }
          }
+        panic("Could not find a suitable boot device (none specified)\n");
      }
- IPL_assert(found, "No virtio device found");
+    switch (iplb.pbt) {
+    case S390_IPL_TYPE_CCW:
+        debug_print_int("device no. ", iplb.ccw.devno);
+        blk_schid.ssid = iplb.ccw.ssid & 0x3;
+        debug_print_int("ssid ", blk_schid.ssid);
+        found = find_subch(iplb.ccw.devno);
+        break;
+    case S390_IPL_TYPE_QEMU_SCSI:
+        vdev->scsi_device_selected = true;
+        vdev->selected_scsi_device.channel = iplb.scsi.channel;
+        vdev->selected_scsi_device.target = iplb.scsi.target;
+        vdev->selected_scsi_device.lun = iplb.scsi.lun;
+        blk_schid.ssid = iplb.scsi.ssid & 0x3;
+        found = find_subch(iplb.scsi.devno);
+        break;
+    default:
+        panic("List-directed IPL not supported yet!\n");
+    }
+
+    if (!found) {
+        IPL_assert(found, "Boot device not found\n");
+    }
+}
+
+static void virtio_setup(void)
+{
+    VDev *vdev = virtio_get_device();
+    QemuIplParameters *early_qipl = (QemuIplParameters *)QIPL_ADDRESS;
+
+    memcpy(&qipl, early_qipl, sizeof(QemuIplParameters));
+
+    if (have_iplb) {
+        menu_setup();
+    }
if (virtio_get_device_type() == VIRTIO_ID_NET) {
          sclp_print("Network boot device detected\n");
          vdev->netboot_start_addr = qipl.netboot_start_addr;
      } else {
          virtio_blk_setup_device(blk_schid);
-
          IPL_assert(virtio_ipl_disk_is_valid(), "No valid IPL device 
detected");
      }
  }
@@ -192,8 +200,9 @@ int main(void)
      sclp_setup();
      css_setup();
      boot_setup();
-    virtio_setup();
+    find_boot_device();
+ virtio_setup();
      zipl_load(); /* no return */
panic("Failed to load OS from hard disk\n");
diff --git a/tests/boot-serial-test.c b/tests/boot-serial-test.c
index 58a48f3..9daf2cb 100644
--- a/tests/boot-serial-test.c
+++ b/tests/boot-serial-test.c
@@ -112,7 +112,7 @@ static testdef_t tests[] = {
      { "sparc", "SS-4", "", "MB86904" },
      { "sparc", "SS-600MP", "", "TMS390Z55" },
      { "sparc64", "sun4u", "", "UltraSPARC" },
-    { "s390x", "s390-ccw-virtio", "", "virtio device" },
+    { "s390x", "s390-ccw-virtio", "", "device" },
      { "m68k", "mcf5208evb", "", "TT", sizeof(kernel_mcf5208), kernel_mcf5208 
},
      { "microblaze", "petalogix-s3adsp1800", "", "TT",
        sizeof(kernel_pls3adsp1800), kernel_pls3adsp1800 },



Reviewed-by: Farhan Ali <address@hidden>




reply via email to

[Prev in Thread] Current Thread [Next in Thread]