[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[qpimd-users] self as a neighbor
From: |
Andrew Lunn |
Subject: |
[qpimd-users] self as a neighbor |
Date: |
Tue, 14 Apr 2009 16:25:06 +0200 |
User-agent: |
Mutt/1.5.18 (2008-05-17) |
Hi folks
Is the daemon supposed to have itself as a neighbor?
uml1> show ip pim neighbor
Recv flags: H=holdtime L=lan_prune_delay P=dr_priority G=generation_id
A=address_list
T=can_disable_join_suppression
Interface Address Neighbor Uptime Timer Holdt DrPri GenId
Recv
eth1 192.168.1.1 192.168.1.1 00:16:12 01:23 01:45 1 9c78d487
HLPG
eth1 192.168.1.1 192.168.1.2 00:15:58 01:28 01:45 1 a36abc15
HLPG
eth2 192.168.1.5 192.168.1.5 00:16:12 01:18 01:45 1 9dfcfa51
HLPG
eth2 192.168.1.5 192.168.1.6 00:15:32 01:18 01:45 1 a9dda562
HLPG
Looking at the logs, i think it is receiving its own multicasted Hello
message and not discarding it.
2009/04/14 15:17:36 PIM: Rescheduling 30 sec hello on interface eth1
2009/04/14 15:17:36 PIM: hello_send: to 224.0.0.13 on eth1: holdt=105
prop_d=500 overr_i=2500 dis_join_supp=0 dr_prio=1 gen_id=2625164423 addrs=1
2009/04/14 15:17:36 PIM: pim_tlv_append_addrlist_ucast: number of encoded
secondary unicast IPv4 addresses: 0
2009/04/14 15:17:36 PIM: pim_msg_send: to 224.0.0.13 on eth1: msg_size=34
checksum=a562
2009/04/14 15:17:36 PIM: Recv IP PIM pkt size=58 from 192.168.1.1 to 224.0.0.13
on fd=12 on ifindex=3 (sock_ifindex=3)
2009/04/14 15:17:36 PIM: Recv IP packet from 192.168.1.1 to 224.0.0.13 on eth1:
size=58 ip_header_size=24 ip_proto=103
2009/04/14 15:17:36 PIM: Recv PIM packet from 192.168.1.1 to 224.0.0.13 on
eth1: ttl=1 pim_version=2 pim_type=0 pim_msg_size=34 checksum=a562
2009/04/14 15:17:36 PIM: pim_hello_recv: from 192.168.1.1 on eth1
2009/04/14 15:17:36 PIM: pim_hello_recv: parse left_size=30: PIM hello TLV
type=1 length=2 from 192.168.1.1 on eth1
2009/04/14 15:17:36 PIM: pim_hello_recv: parse left_size=24: PIM hello TLV
type=2 length=4 from 192.168.1.1 on eth1
2009/04/14 15:17:36 PIM: pim_hello_recv: parse left_size=16: PIM hello TLV
type=19 length=4 from 192.168.1.1 on eth1
2009/04/14 15:17:36 PIM: pim_hello_recv: parse left_size=8: PIM hello TLV
type=20 length=4 from 192.168.1.1 on eth1
2009/04/14 15:17:36 PIM: pim_hello_recv: PIM hello option from 192.168.1.1 on
interface eth1: holdtime=105
2009/04/14 15:17:36 PIM: pim_hello_recv: PIM hello option from 192.168.1.1 on
interface eth1: propagation_delay=500
2009/04/14 15:17:36 PIM: pim_hello_recv: PIM hello option from 192.168.1.1 on
interface eth1: override_interval=2500
2009/04/14 15:17:36 PIM: pim_hello_recv: PIM hello option from 192.168.1.1 on
interface eth1: can_disable_join_suppression=0
2009/04/14 15:17:36 PIM: pim_hello_recv: PIM hello option from 192.168.1.1 on
interface eth1: dr_priority=1
2009/04/14 15:17:36 PIM: pim_hello_recv: PIM hello option from 192.168.1.1 on
interface eth1: generation_id=2625164423
2009/04/14 15:17:36 PIM: neighbor_timer_off: cancelling timer for neighbor
192.168.1.1 on eth1
2009/04/14 15:17:36 PIM: pim_neighbor_timer_reset: starting 105 sec timer for
neighbor 192.168.1.1 on eth1
maybe related, the next line in the log is:
2009/04/14 15:17:36 PIM: pim_neighbor_update: internal error: trying to replace
same prefix list=0
Andrew
- [qpimd-users] self as a neighbor,
Andrew Lunn <=