Re: [Savannah-help-public] git repository doesn't accepts pushes anymore

[Sylvain Beucler]

Hi,

Unfortunately I cannot reproduce your problem.

I made a backup of the repository, cloned your repository under your
account and could commit and push alright.
(I then reset the repository with the backup)

So it doesn't look like a server-side problem either.


Are you able to upload a big file to the Savannah download area, for
instance? Maybe this is a network issue (MTU?).

-- 
Sylvain

On Sat, Feb 02, 2008 at 09:02:12PM +0100, Francesco Salvestrini wrote:
> Hi
> 
> In the last few days the git repository for 'sitetool' project
> (https://savannah.nongnu.org/projects/sitetool) on savannah stopped accepting
> git 'pushes'.
> 
> When I try to push the latest changes git starts sending updates but  the
> procedure hangs and gets interrupted by a timeout.
> 
> In order to investigate the problem I've created a simple on-liner
> script 'ssh-debug-wrapper' like the following one:
> 
> ssh -v -v -v $@
> 
> Then the following command:
> 
> GIT_SSH="./ssh_debug_wrapper" git push
> 
> Outputs what follows:
> 
> address@hidden:~/Sviluppo/sitetool/sitetool$ GIT_SSH="./ssh-debug-wrapper"
> git push
> OpenSSH_4.7p1, OpenSSL 0.9.8g 19 Oct 2007
> debug1: Reading configuration data /home/francesco/.ssh/config
> debug1: Reading configuration data /etc/ssh/ssh_config
> debug2: ssh_connect: needpriv 0
> debug1: Connecting to git.sv.gnu.org [199.232.41.69] port 22.
> debug1: Connection established.
> debug1: identity file /home/francesco/.ssh/identity type -1
> debug3: Not a RSA1 key file /home/francesco/.ssh/id_rsa.
> debug2: key_type_from_name: unknown key type '-----BEGIN'
> debug3: key_read: missing keytype
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug2: key_type_from_name: unknown key type '-----END'
> debug3: key_read: missing keytype
> debug1: identity file /home/francesco/.ssh/id_rsa type 1
> debug3: Not a RSA1 key file /home/francesco/.ssh/id_dsa.
> debug2: key_type_from_name: unknown key type '-----BEGIN'
> debug3: key_read: missing keytype
> debug2: key_type_from_name: unknown key type 'Proc-Type:'
> debug3: key_read: missing keytype
> debug2: key_type_from_name: unknown key type 'DEK-Info:'
> debug3: key_read: missing keytype
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug3: key_read: missing whitespace
> debug2: key_type_from_name: unknown key type '-----END'
> debug3: key_read: missing keytype
> debug1: identity file /home/francesco/.ssh/id_dsa type 2
> debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3p2
> Debian-9
> debug1: match: OpenSSH_4.3p2 Debian-9 pat OpenSSH*
> debug1: Enabling compatibility mode for protocol 2.0
> debug1: Local version string SSH-2.0-OpenSSH_4.7
> debug2: fd 3 setting O_NONBLOCK
> debug1: SSH2_MSG_KEXINIT sent
> debug1: SSH2_MSG_KEXINIT received
> debug2: kex_parse_kexinit:
> diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
> debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,address@hidden,aes128-ctr,aes192-ctr,aes256-ctr
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,address@hidden,aes128-ctr,aes192-ctr,aes256-ctr
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,address@hidden,hmac-ripemd160,address@hidden,hmac-sha1-96,hmac-md5-96
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,address@hidden,hmac-ripemd160,address@hidden,hmac-sha1-96,hmac-md5-96
> debug2: kex_parse_kexinit: none,address@hidden,zlib
> debug2: kex_parse_kexinit: none,address@hidden,zlib
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit: first_kex_follows 0
> debug2: kex_parse_kexinit: reserved 0
> debug2: kex_parse_kexinit:
> diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
> debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,address@hidden,aes128-ctr,aes192-ctr,aes256-ctr
> debug2: kex_parse_kexinit:
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,address@hidden,aes128-ctr,aes192-ctr,aes256-ctr
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,address@hidden,hmac-sha1-96,hmac-md5-96
> debug2: kex_parse_kexinit:
> hmac-md5,hmac-sha1,hmac-ripemd160,address@hidden,hmac-sha1-96,hmac-md5-96
> debug2: kex_parse_kexinit: none,address@hidden
> debug2: kex_parse_kexinit: none,address@hidden
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit:
> debug2: kex_parse_kexinit: first_kex_follows 0
> debug2: kex_parse_kexinit: reserved 0
> debug2: mac_setup: found hmac-md5
> debug1: kex: server->client aes128-cbc hmac-md5 none
> debug2: mac_setup: found hmac-md5
> debug1: kex: client->server aes128-cbc hmac-md5 none
> debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
> debug2: dh_gen_key: priv key bits set: 124/256
> debug2: bits set: 480/1024
> debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
> debug3: check_host_in_hostfile: filename /home/francesco/.ssh/known_hosts2
> debug3: check_host_in_hostfile: filename /etc/ssh/ssh_known_hosts2
> debug3: check_host_in_hostfile: filename /home/francesco/.ssh/known_hosts2
> debug3: check_host_in_hostfile: filename /etc/ssh/ssh_known_hosts2
> debug3: check_host_in_hostfile: filename /home/francesco/.ssh/known_hosts
> debug3: check_host_in_hostfile: match line 283
> debug3: check_host_in_hostfile: filename /home/francesco/.ssh/known_hosts
> debug3: check_host_in_hostfile: match line 280
> debug1: Host 'git.sv.gnu.org' is known and matches the RSA host key.
> debug1: Found key in /home/francesco/.ssh/known_hosts:283
> debug2: bits set: 505/1024
> debug1: ssh_rsa_verify: signature correct
> debug2: kex_derive_keys
> debug2: set_newkeys: mode 1
> debug1: SSH2_MSG_NEWKEYS sent
> debug1: expecting SSH2_MSG_NEWKEYS
> debug2: set_newkeys: mode 0
> debug1: SSH2_MSG_NEWKEYS received
> debug1: SSH2_MSG_SERVICE_REQUEST sent
> debug2: service_accept: ssh-userauth
> debug1: SSH2_MSG_SERVICE_ACCEPT received
> debug2: key: /home/francesco/.ssh/identity ((nil))
> debug2: key: /home/francesco/.ssh/id_rsa (0x80990f0)
> debug2: key: /home/francesco/.ssh/id_dsa (0x8099108)
> debug1: Authentications that can continue: publickey
> debug3: start over, passed a different list publickey
> debug3: preferred publickey,keyboard-interactive,password
> debug3: authmethod_lookup publickey
> debug3: remaining preferred: keyboard-interactive,password
> debug3: authmethod_is_enabled publickey
> debug1: Next authentication method: publickey
> debug1: Trying private key: /home/francesco/.ssh/identity
> debug3: no such identity: /home/francesco/.ssh/identity
> debug1: Offering public key: /home/francesco/.ssh/id_rsa
> debug3: send_pubkey_test
> debug2: we sent a publickey packet, wait for reply
> debug1: Authentications that can continue: publickey
> debug1: Offering public key: /home/francesco/.ssh/id_dsa
> debug3: send_pubkey_test
> debug2: we sent a publickey packet, wait for reply
> debug1: Server accepts key: pkalg ssh-dss blen 433
> debug2: input_userauth_pk_ok: fp
> 5b:8c:91:5b:07:a7:6d:64:8f:6c:a0:c7:68:c8:14:2c
> debug3: sign_and_send_pubkey
> debug1: PEM_read_PrivateKey failed
> debug1: read PEM private key done: type <unknown>
> Enter passphrase for key '/home/francesco/.ssh/id_dsa':
> debug1: read PEM private key done: type DSA
> debug1: Authentication succeeded (publickey).
> debug2: fd 4 setting O_NONBLOCK
> debug2: fd 5 setting O_NONBLOCK
> debug1: channel 0: new [client-session]
> debug3: ssh_session2_open: channel_new: 0
> debug2: channel 0: send open
> debug1: Entering interactive session.
> debug2: callback start
> debug2: client_session2_setup: id 0
> debug1: Sending command: git-receive-pack '/srv/git/sitetool.git'
> debug2: channel 0: request exec confirm 0
> debug2: fd 3 setting TCP_NODELAY
> debug2: callback done
> debug2: channel 0: open confirm rwindow 0 rmax 32768
> debug2: channel 0: rcvd adjust 131072
> updating 'refs/heads/master'
>   from 5e45ad4868be1a57030c113713ec4df3637c1766
>   to   ed8757572b3feac545941a24cc67c8b88a6a7117
>  Also local refs/remotes/origin/master
> Generating pack...
> Done counting 21 objects.
> Deltifying 21 objects...
>  100% (21/21) done
> Writing 21 objects...
> debug2: channel 0: read<=0 rfd 4 len 0
> debug2: channel 0: read failed
> debug2: channel 0: close_read
> debug2: channel 0: input open -> drain
> debug2: channel 0: ibuf empty
> debug2: channel 0: send eof
> debug2: channel 0: input drain -> closed
> 
> Total 21 (delta 6), reused 19 (delta 5)
> debug1: channel 0: free: client-session, nchannels 1
> debug3: channel 0: status: The following connections are open:
>   #0 client-session (t4 r0 i3/0 o0/0 fd -1/5 cfd -1)
> 
> debug3: channel 0: close_fds r -1 w 5 e 6 c -1
> debug1: fd 0 clearing O_NONBLOCK
> debug1: fd 1 clearing O_NONBLOCK
> Read from remote host git.sv.gnu.org: Connection timed out
> debug1: Transferred: stdin 0, stdout 0, stderr 60 bytes in 1081.4 seconds
> debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.1
> debug1: Exit status -1
> fatal: The remote end hung up unexpectedly
> error: failed to push
> to 'ssh://address@hidden/srv/git/sitetool.git'
> 
> The repository worked without problems since the it was created.
> 
> It seems to me a server-side error but I have no clues ... any hint
> welcomed :-)
> 
> Cheer,
> Francesco Salvestrini
> -- 
> If you are shooting under 80 you are neglecting your business;
> over 80 you are neglecting your golf.
>                 -- Walter Hagen