Re: [Simulavr-devel] Further Make problems (SWIG again?)

[Oleg Batrashev]

OK, it is hard coded, so the fast solution is open src/Makefile.in and
fix python2.3 to python2.4, then *rerun* config.status (it seems you
don't have to rerun configure, just config.status)

Another solution is to try to set CPPFLAGS before running make or
configure, but Im not sure it helps.

The actual solution is to fix Makefile.am and update configure.ac to
discover python version, etc, but this is task to maintainer ;)

Oleg

On Sat, 2006-08-05 at 13:39 +1000, nimrodx wrote:
> Hi All,
> 
> Oleg was right, it is a Python.h! The command below is looking for the 
> includes in the wrong directory:
> 
> /usr/local/bin/swig -c++ -python -outdir python/ -o 
> python/simulavr_wrap.cpp simulavr.i
> g++ -I. -I/usr/include/python2.3 python/simulavr_wrap.cpp application.o 
> at4433.o at8515.o atmega128.o avrdevice.o avrerror.o avrmalloc.o 
> decoder.o decoder_trace.o flash.o gdbserver.o hardware.o helper.o 
> hwacomp.o hwad.o hweeprom.o hwextirq.o hwmegaextirq.o hwmegatimer.o 
> hwmegatimer0123irq.o hwport.o hwspi.o hwsreg.o hwstack.o hwtimer.o 
> hwtimer01irq.o hwuart.o hwwado.o ioregs.o irqsystem.o keyboard.o lcd.o 
> memory.o mysocket.o net.o pin.o pinatport.o printable.o rwmem.o scope.o 
> serialrx.o serialtx.o systemclock.o trace.o ui.o 
> /usr/local/AVR/i686-pc-linux-gnu/avr/lib/libbfd.a 
> /usr/local/AVR/lib/libiberty.a -lc -lm -lncurses -shared -o 
> python/_simulavr.so
> 
> Note that the -I/usr/include/python2.3 is looking for a non-existent 
> version. I have python2.4 installed.
> How do I set "make" do it knows to go for python2.4 instead?
> 
> 
> Thanks for your time,
> 
> Matt
> 
> nimrodx wrote:
> > Hi Oleg, Klaus, and Bill, and other Gurus
> >
> > Well guys, since restarting, I am getting different error messages! 
> > Don't know why, but now I get this....
> >
> >
> > /bin/sh ../libtool --mode=link --tag=CXX g++ -O2 -g -O2   -o 
> > kbdgentables  kbdgentables.o  -lncurses
> > g++ -O2 -g -O2 -o kbdgentables kbdgentables.o  -lncurses
> > ./kbdgentables
> > if /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H 
> > -I/usr/local/AVR/include 
> > -I/usr/local/AVR/i686-pc-linux-gnu/avr/include -I../src -I ../src   
> > -O2 -g -O2 -MT keyboard.lo -MD -MP -MF ".deps/keyboard.Tpo" -c -o 
> > keyboard.lo keyboard.cpp; \
> > then mv -f ".deps/keyboard.Tpo" ".deps/keyboard.Plo"; else rm -f 
> > ".deps/keyboard.Tpo"; exit 1; fi
> > g++ -DHAVE_CONFIG_H -I/usr/local/AVR/include 
> > -I/usr/local/AVR/i686-pc-linux-gnu/avr/include -I../src -I ../src -O2 
> > -g -O2 -MT keyboard.lo -MD -MP -MF .deps/keyboard.Tpo -c keyboard.cpp  
> > -fPIC -DPIC -o .libs/keyboard.o
> > g++ -DHAVE_CONFIG_H -I/usr/local/AVR/include 
> > -I/usr/local/AVR/i686-pc-linux-gnu/avr/include -I../src -I ../src -O2 
> > -g -O2 -MT keyboard.lo -MD -MP -MF .deps/keyboard.Tpo -c keyboard.cpp 
> > -o keyboard.o >/dev/null 2>&1
> > make[3]: *** [keyboard.lo] Error 1
> > make[3]: Leaving directory 
> > `/home/alphanax/Downloads/avr/simulavrxx-0.8.006/src'
> > make[2]: *** [all-recursive] Error 1
> > make[2]: Leaving directory 
> > `/home/alphanax/Downloads/avr/simulavrxx-0.8.006/src'
> > make[1]: *** [all] Error 2
> > make[1]: Leaving directory 
> > `/home/alphanax/Downloads/avr/simulavrxx-0.8.006/src'
> > make: *** [all-recursive] Error 1
> >
> >
> > I am embarrassed to be asking so many questions, and I really do 
> > appreciate your suggestions.
> >
> > I had just restarted today, had made clean and made distclean, and then
> > ./configure --prefix=/usr/local/AVR
> > then I ran make...and did not get the same errors as when I posted 
> > that message.
> >
> > Beats me. Any ideas?
> >
> > Thanks,
> >
> > Matt
> >
> >
> >
> > Oleg Batrashev wrote:
> >> Hi,
> >>
> >> I think you cut the wrong place from make output. I suppose you have
> >> something like "Python.h not found" earlier in output, because
> >> Py_InitModule is declared there.
> >>
> >> On debian I have this file in python-dev package, and configure runs
> >> cleanly without this package. So check (and/or install) development
> >> files for python.
> >>
> >> Oleg
> >>
> >>
> >> On Wed, 2006-08-02 at 13:25 +1000, nimrodx wrote:
> >>  
> >>> Hi Simulavr Gurus,
> >>>
> >>> I have compiled and installed the latest development release of swig
> >>> 1.3.29.
> >>> This has caused the previously mentioned problem with swig (-outdir 
> >>> option not available) to disappear.
> >>>
> >>> Now I have the following error at make time:
> >>>
> >>> python/simulavr_wrap.cpp: In function `void init_simulavr()':
> >>> python/simulavr_wrap.cpp:11934: `SwigMethods' undeclared (first use 
> >>> this
> >>>    function)
> >>> python/simulavr_wrap.cpp:11936: `Py_InitModule' undeclared (first 
> >>> use this
> >>>    function)
> >>> python/simulavr_wrap.cpp:11943: `SWIG_From_int' undeclared (first 
> >>> use this
> >>>    function)
> >>> make[3]: *** [python/_simulavr.so] Error 1
> >>> make[3]: Leaving directory 
> >>> `/home/alphanax/Downloads/avr/simulavrxx-0.8.006/src'
> >>> make[2]: *** [all-recursive] Error 1
> >>> make[2]: Leaving directory 
> >>> `/home/alphanax/Downloads/avr/simulavrxx-0.8.006/src'
> >>> make[1]: *** [all] Error 2
> >>> make[1]: Leaving directory 
> >>> `/home/alphanax/Downloads/avr/simulavrxx-0.8.006/src'
> >>> make: *** [all-recursive] Error 1
> >>>
> >>> What next?  Do I need a slightly earlier release of swig?
> >>>
> >>> I think I am making progress here, and I greatly appreciate your help.
> >>>
> >>> Thanks,
> >>>
> >>> Matt
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> Simulavr-devel mailing list
> >>> address@hidden
> >>> http://lists.nongnu.org/mailman/listinfo/simulavr-devel
> >>>     
> >>
> >>
> >>   
> >
> >
> >
> > _______________________________________________
> > Simulavr-devel mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/simulavr-devel
> >
> 
> 
> 
> _______________________________________________
> Simulavr-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/simulavr-devel