[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Sks-devel] Sks-devel Digest, Vol 184, Issue 28
From: |
Jason John Schwarz |
Subject: |
Re: [Sks-devel] Sks-devel Digest, Vol 184, Issue 28 |
Date: |
Fri, 23 Aug 2019 12:15:13 -0400 |
Unfortunately even with unlimited I am still seeing occasional crashes.
Jason John Schwarz
> On Aug 23, 2019, at 12:00 PM, address@hidden wrote:
>
> Send Sks-devel mailing list submissions to
> address@hidden
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.nongnu.org/mailman/listinfo/sks-devel
> or, via email, send a message with subject or body 'help' to
> address@hidden
>
> You can reach the person managing the list at
> address@hidden
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Sks-devel digest..."
>
>
> Today's Topics:
>
> 1. Re: Sks-devel Digest, Vol 184, Issue 26 (Jason John Schwarz)
> 2. Status page problem (Kiss Gabor (Bitman))
> 3. Re: Status page problem (Kristian Fiskerstrand)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 22 Aug 2019 12:59:43 -0400
> From: Jason John Schwarz <address@hidden>
> To: Kristian Fiskerstrand <address@hidden>
> Cc: address@hidden
> Subject: Re: [Sks-devel] Sks-devel Digest, Vol 184, Issue 26
> Message-ID: <address@hidden>
> Content-Type: text/plain; charset="utf-8"
>
> Giving unlimited a try, because the results I am seeing are all over the
> place.
>
> Jason John Schwarz
> Chief Technical Officer
> MSC Inc
>
> eMail: address@hidden <mailto:address@hidden>
> Phone: (910) 689.0557
> (800) 284.7872
> Fax: (910) 689.0558
>
>
>
>> On Aug 22, 2019, at 12:28 PM, Kristian Fiskerstrand <address@hidden> wrote:
>>
>> Just use unlimited to test, you can monitor actual size through proc for the
>> pid to determine a proper value, but I haven't done the exercise myself
>>
>> On August 22, 2019 6:19:03 PM GMT+02:00, Jason John Schwarz <address@hidden>
>> wrote:
>> OK, that is where I was adjusting it on my system, and ulimit -s is showing
>> the increase properly...maybe I just haven't made it large enough.
>> I am up to 16384 now. I was hesitant on going to unlimited. Any suggestion
>> on value, or are you running it in unlimited mode?
>>
>> Jason John Schwarz
>> Chief Technical Officer
>> MSC Inc
>>
>> eMail: address@hidden <mailto:address@hidden>
>> Phone: (910) 689.0557
>> (800) 284.7872
>> Fax: (910) 689.0558
>>
>>
>>
>>> On Aug 22, 2019, at 12:14 PM, Kristian Fiskerstrand <address@hidden
>>> <mailto:address@hidden>> wrote:
>>>
>>> On 22.08.2019 18:08, Jason John Schwarz wrote:
>>>> I am seeing the same issue on the insect.com <http://insect.com/> server.
>>>> Where is the
>>>> stack size setting, because I have not been able to find it for SKS?
>>>
>>> Depends a bit on init system , so you'd have to check documentation for
>>> your system. But traditionally you specify it on a per user basis in
>>> /etc/security/limits.conf . See also man ulimit for a one-off, e.g
>>> ulimit -s unlimited before starting sks.
>>>
>>> --
>>> ----------------------------
>>> Kristian Fiskerstrand
>>> Blog: https://blog.sumptuouscapital.com <https://blog.sumptuouscapital.com/>
>>> Twitter: @krifisk
>>> ----------------------------
>>> Public OpenPGP keyblock at hkp://pool.sks-keyservers.net
>>> <hkp://pool.sks-keyservers.net>
>>> fpr:94CB AFDD 3034 5109 5618 35AA 0B7F 8B60 E3ED FAE3
>>> ----------------------------
>>> Corruptissima re publica plurimæ leges
>>> The greater the degeneration of the republic, the more of its laws
>>>
>>
>>
>> --
>> Sent from my Android device with K-9 Mail. Please excuse my brevity.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <https://lists.nongnu.org/archive/html/sks-devel/attachments/20190822/8d8f1dae/attachment.html>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 23 Aug 2019 06:13:48 +0200 (CEST)
> From: "Kiss Gabor (Bitman)" <address@hidden>
> To: Kristian Fiskerstrand <address@hidden>
> Cc: address@hidden
> Subject: [Sks-devel] Status page problem
> Message-ID: <address@hidden>
> Content-Type: TEXT/PLAIN; charset=US-ASCII
>
> Dear Kristian,
>
> This screenshot was created this morning. (Cca. 04:00 UTC)
> http://bakacsin.ki.iif.hu/~kissg/tmp/sks-pool_screenshot.png
>
> Regards
>
> Gabor
>
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 23 Aug 2019 09:41:26 +0200
> From: Kristian Fiskerstrand
> <address@hidden>
> To: "Kiss Gabor (Bitman)" <address@hidden>
> Cc: address@hidden
> Subject: Re: [Sks-devel] Status page problem
> Message-ID:
> <address@hidden>
> Content-Type: text/plain; charset="utf-8"
>
> On 23.08.2019 06:13, Kiss Gabor (Bitman) wrote:
>> Dear Kristian,
>>
>> This screenshot was created this morning. (Cca. 04:00 UTC)
>> http://bakacsin.ki.iif.hu/~kissg/tmp/sks-pool_screenshot.png
>
> Thanks for reporting, that's curious...
>>
>> Regards
>>
>> Gabor
>>
>
>
> --
> ----------------------------
> Kristian Fiskerstrand
> Blog: https://blog.sumptuouscapital.com
> Twitter: @krifisk
> ----------------------------
> Public OpenPGP keyblock at hkp://pool.sks-keyservers.net
> fpr:94CB AFDD 3034 5109 5618 35AA 0B7F 8B60 E3ED FAE3
> ----------------------------
> Corruptissima re publica plurimæ leges
> The greater the degeneration of the republic, the more of its laws
>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: signature.asc
> Type: application/pgp-signature
> Size: 488 bytes
> Desc: OpenPGP digital signature
> URL:
> <https://lists.nongnu.org/archive/html/sks-devel/attachments/20190823/c602302b/attachment.sig>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Sks-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/sks-devel
>
>
> ------------------------------
>
> End of Sks-devel Digest, Vol 184, Issue 28
> ******************************************
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Sks-devel] Sks-devel Digest, Vol 184, Issue 28,
Jason John Schwarz <=