[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Automake-commit] [SCM] GNU Automake branch, maint, updated. v1.12-80-g7
|
From: |
Stefano Lattarini |
|
Subject: |
[Automake-commit] [SCM] GNU Automake branch, maint, updated. v1.12-80-g7b142a7 |
|
Date: |
Fri, 18 May 2012 12:57:13 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Automake".
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=7b142a7b363a49be43ff861abc2dca5af9593f9d
The branch, maint has been updated
via 7b142a7b363a49be43ff861abc2dca5af9593f9d (commit)
from 8084ae1b520862e03201d3bddfe01f3c8d197d1c (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
-----------------------------------------------------------------------
Summary of changes:
Makefile.am | 2 +-
defs | 6 ++--
defs-static.in | 2 +-
gen-testsuite-part | 33 +++++++++------------------
syntax-checks.mk | 9 ++++++-
t/README | 15 ++++++++----
t/am-tests-environment.sh | 1 -
t/ax/tap-summary-aux.sh | 1 -
t/ax/testsuite-summary-checks.sh | 1 -
t/backcompat5.sh | 2 +-
t/check-concurrency-bug9245.sh | 14 ++++-------
t/check-exported-srcdir.sh | 3 +-
t/check-fd-redirect.sh | 3 +-
t/check-no-test-driver.sh | 2 +-
t/check-subst-prog.sh | 1 +
t/check-subst.sh | 7 +++--
t/check-tests-in-builddir.sh | 28 ++++++++++++-----------
t/check.sh | 5 +--
t/check10.sh | 2 +-
t/check11.sh | 13 ++++++-----
t/check12.sh | 11 +++++----
t/check2.sh | 5 +--
t/check3.sh | 1 +
t/check4.sh | 1 +
t/check5.sh | 1 +
t/check6.sh | 1 +
t/check7.sh | 1 +
t/check8.sh | 1 +
t/color.sh | 7 +++--
t/color2.sh | 7 +++--
t/cygnus-imply-foreign.sh | 2 +-
t/dejagnu.sh | 2 +-
t/dist-auxdir-many-subdirs.sh | 1 -
t/distcheck-pr10470.sh | 1 -
t/exeext4.sh | 1 +
t/java-compile-run-flat.sh | 2 +-
t/java-compile-run-nested.sh | 1 -
t/make-dryrun.tap | 1 -
t/maken3.sh | 1 +
t/parallel-tests-cmdline-override.sh | 1 -
t/parallel-tests-console-output.sh | 1 -
t/parallel-tests-driver-install.sh | 1 -
t/parallel-tests-dry-run-1.sh | 1 -
t/parallel-tests-dry-run-2.sh | 1 -
t/parallel-tests-empty-testlogs.sh | 1 -
t/parallel-tests-exeext.sh | 1 -
t/parallel-tests-exit-statuses.sh | 1 -
t/parallel-tests-extra-programs.sh | 1 -
t/parallel-tests-fd-redirect-exeext.sh | 1 -
t/parallel-tests-fd-redirect.sh | 1 -
t/parallel-tests-fork-bomb.sh | 1 -
t/parallel-tests-harderror.sh | 1 -
t/parallel-tests-interrupt.tap | 1 -
t/parallel-tests-log-compiler-1.sh | 1 -
t/parallel-tests-log-compiler-2.sh | 1 -
t/parallel-tests-log-compiler-example.sh | 1 -
t/parallel-tests-log-override-1.sh | 1 -
t/parallel-tests-log-override-2.sh | 1 -
t/parallel-tests-log-override-recheck.sh | 1 -
t/parallel-tests-many.sh | 1 -
t/parallel-tests-no-color-in-log.sh | 1 -
t/parallel-tests-no-spurious-summary.sh | 1 -
t/parallel-tests-once.sh | 1 -
t/parallel-tests-recheck-depends-on-all.sh | 1 -
t/parallel-tests-reset-term.sh | 1 -
t/parallel-tests-subdir.sh | 1 -
t/parallel-tests-suffix-prog.sh | 1 -
t/parallel-tests-suffix.sh | 1 -
t/parallel-tests-trailing-bslash.sh | 1 -
t/parallel-tests-unreadable.sh | 1 -
t/parallel-tests.sh | 1 -
t/parallel-tests10.sh | 1 -
t/parallel-tests2.sh | 1 -
t/parallel-tests3.sh | 1 -
t/parallel-tests5.sh | 1 -
t/parallel-tests6.sh | 1 -
t/parallel-tests8.sh | 1 -
t/parallel-tests9.sh | 1 -
t/posixsubst-tests.sh | 1 +
t/pr401.sh | 3 +-
t/pr401b.sh | 1 -
t/pr401c.sh | 6 +---
t/self-check-env-sanitize.tap | 2 +-
t/serial-tests.sh | 6 +---
t/tap-ambiguous-directive.sh | 1 -
t/tap-autonumber.sh | 1 -
t/tap-bad-prog.tap | 1 -
t/tap-bailout-and-logging.sh | 1 -
t/tap-bailout-leading-space.sh | 1 -
t/tap-bailout-suppress-badexit.sh | 1 -
t/tap-bailout-suppress-later-diagnostic.sh | 1 -
t/tap-bailout-suppress-later-errors.sh | 1 -
t/tap-bailout.sh | 1 -
t/tap-basic.sh | 1 -
t/tap-color.sh | 1 -
t/tap-common-setup.sh | 1 -
t/tap-deps.sh | 1 -
t/tap-diagnostic-custom.sh | 1 -
t/tap-diagnostic.sh | 1 -
t/tap-doc.sh | 1 -
t/tap-doc2.sh | 1 -
t/tap-driver-stderr.sh | 1 -
t/tap-empty-diagnostic.sh | 1 -
t/tap-empty.sh | 1 -
t/tap-escape-directive-2.sh | 1 -
t/tap-escape-directive.sh | 1 -
t/tap-exit.sh | 1 -
t/tap-fancy.sh | 1 -
t/tap-fancy2.sh | 1 -
t/tap-global-log.sh | 1 -
t/tap-global-result.sh | 1 -
t/tap-log.sh | 1 -
t/tap-merge-stdout-stderr.sh | 1 -
t/tap-missing-plan-and-bad-exit.sh | 1 -
t/tap-more.sh | 1 -
t/tap-more2.sh | 1 -
t/tap-msg0-bailout.sh | 1 -
t/tap-msg0-directive.sh | 1 -
t/tap-msg0-misc.sh | 1 -
t/tap-msg0-planskip.sh | 1 -
t/tap-msg0-result.sh | 1 -
t/tap-negative-numbers.sh | 1 -
t/tap-no-disable-hard-error.sh | 1 -
t/tap-no-merge-stdout-stderr.sh | 1 -
t/tap-no-spurious-numbers.sh | 1 -
t/tap-no-spurious-summary.sh | 1 -
t/tap-no-spurious.sh | 1 -
t/tap-not-ok-skip.sh | 1 -
t/tap-number-wordboundary.sh | 1 -
t/tap-numbers-leading-zero.sh | 1 -
t/tap-numeric-description.sh | 1 -
t/tap-out-of-order.sh | 1 -
t/tap-passthrough-exit.sh | 1 -
t/tap-passthrough.sh | 1 -
t/tap-plan-corner.sh | 1 -
t/tap-plan-errors.sh | 1 -
t/tap-plan-leading-zero.sh | 1 -
t/tap-plan-malformed.sh | 1 -
t/tap-plan-middle.sh | 1 -
t/tap-plan-whitespace.sh | 1 -
t/tap-plan.sh | 1 -
t/tap-planskip-and-logging.sh | 1 -
t/tap-planskip-badexit.sh | 1 -
t/tap-planskip-bailout.sh | 1 -
t/tap-planskip-case-insensitive.sh | 1 -
t/tap-planskip-late.sh | 1 -
t/tap-planskip-later-errors.sh | 1 -
t/tap-planskip-unplanned-corner.sh | 1 -
t/tap-planskip-unplanned.sh | 1 -
t/tap-planskip-whitespace.sh | 1 -
t/tap-planskip.sh | 1 -
t/tap-realtime.sh | 1 -
t/tap-recheck-logs.sh | 1 -
t/tap-recheck.sh | 1 -
t/tap-result-comment.sh | 1 -
t/tap-signal.tap | 1 -
t/tap-test-number-0.sh | 1 -
t/tap-todo-skip-together.sh | 1 -
t/tap-todo-skip-whitespace.sh | 1 -
t/tap-todo-skip.sh | 1 -
t/tap-unplanned.sh | 1 -
t/tap-whitespace-normalization.sh | 1 -
t/tap-with-and-without-number.sh | 1 -
t/tap-xfail-tests.sh | 1 -
t/test-driver-acsubst.sh | 1 -
t/test-driver-cond.sh | 1 -
t/test-driver-create-log-dir.sh | 1 -
t/test-driver-custom-multitest-recheck.sh | 1 -
t/test-driver-custom-multitest-recheck2.sh | 1 -
t/test-driver-custom-multitest.sh | 1 -
t/test-driver-custom-no-extra-driver.sh | 1 -
t/test-driver-custom-xfail-tests.sh | 1 -
t/test-driver-custom.sh | 1 -
t/test-driver-fail.sh | 1 -
t/test-driver-is-distributed.sh | 1 -
t/test-driver-strip-vpath.sh | 1 -
t/test-driver-trs-suffix-registered.sh | 1 -
t/test-extensions-cond.sh | 1 -
t/test-extensions.sh | 1 -
t/test-harness-vpath-rewrite.sh | 1 -
t/test-log.sh | 1 -
t/test-logs-repeated.sh | 1 -
t/test-metadata-global-log.sh | 1 -
t/test-metadata-global-result.sh | 1 -
t/test-metadata-recheck.sh | 1 -
t/test-metadata-results.sh | 1 -
t/test-missing.sh | 1 -
t/test-missing2.sh | 1 -
t/test-trs-basic.sh | 1 -
t/test-trs-recover.sh | 1 -
t/test-trs-recover2.sh | 1 -
t/tests-environment-and-log-compiler.sh | 1 -
t/tests-environment-backcompat.sh | 2 +-
t/tests-environment-fd-redirect.sh | 1 -
t/tests-environment.sh | 1 +
t/testsuite-recheck-speed.sh | 1 -
t/testsuite-summary-count-many.sh | 1 -
t/testsuite-summary-reference-log.sh | 1 -
t/testsuite-summary-speed.sh | 1 -
199 files changed, 110 insertions(+), 262 deletions(-)
diff --git a/Makefile.am b/Makefile.am
index 27f65e4..f15ede4 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -339,7 +339,7 @@ AM_TESTS_ENVIRONMENT = \
me \
required \
am_using_tap \
- am_parallel_tests \
+ am_serial_tests \
am_test_prefer_config_shell \
am_original_AUTOMAKE \
am_original_ACLOCAL \
diff --git a/defs b/defs
index fcdbb7d..24d3fd2 100644
--- a/defs
+++ b/defs
@@ -1087,10 +1087,10 @@ else
# to append AC_OUTPUT.
{
echo "AC_INIT([$me], [1.0])"
- if test x"$am_parallel_tests" = x"yes"; then
- echo "AM_INIT_AUTOMAKE([parallel-tests])"
- else
+ if test x"$am_serial_tests" = x"yes"; then
echo "AM_INIT_AUTOMAKE"
+ else
+ echo "AM_INIT_AUTOMAKE([parallel-tests])"
fi
echo "AC_CONFIG_FILES([Makefile])"
} >configure.ac || framework_failure_ "creating configure.ac skeleton"
diff --git a/defs-static.in b/defs-static.in
index 44db309..1dfd8d3 100644
--- a/defs-static.in
+++ b/defs-static.in
@@ -73,7 +73,7 @@ for var in \
me \
required \
am_using_tap \
- am_parallel_tests \
+ am_serial_tests \
am_create_testdir \
am_tap_implementation \
am_test_prefer_config_shell \
diff --git a/gen-testsuite-part b/gen-testsuite-part
index a2db2d3..34e10a8 100755
--- a/gen-testsuite-part
+++ b/gen-testsuite-part
@@ -191,30 +191,19 @@ my %deps_extractor =
my %test_generators =
(
#
- # For each test script in the Automake testsuite that itself tests
- # features of the TESTS automake interface, define a sibling test
- # that does likewise, but with the option 'parallel-tests' enabled.
+ # Any test script in the Automake testsuite that checks features of
+ # the Automake-provided parallel testsuite harness might want to
+ # define a sibling test that does similar checks, but for the old
+ # serial testsuite harness instead.
#
- # A test is considered a candidate for sibling-generation if any
- # Makefile.am generated by it define the TESTS variable.
+ # Individual tests can request the creation of such a sibling by
+ # making the string "try-with-serial-tests" appear any line of the
+ # test itself.
#
- # Individual tests can prevent the creation of such a sibling by
- # explicitly setting the '$am_parallel_tests' variable to either "yes"
- # or "no". The rationale for this is that if the variable is set to
- # "yes", the test already uses the 'parallel-tests' option, so that
- # a sibling would be just a duplicate; while if the variable is set
- # to "no", the test doesn't support, or is not meant to run with, the
- # 'parallel-tests' option, and forcing it to do so in the sibling
- # would likely cause a spurious failure.
- #
- parallel_testsuite_harness =>
+ serial_testsuite_harness =>
{
- line_matcher =>
- qr/(?:^|\s)TESTS\s*=/,
- line_rejecter =>
- qr/(?:^[^#]*\bparallel-tests\b)|\bam_parallel_tests=/,
- shell_setup_code =>
- 'am_parallel_tests=yes'
+ line_matcher => qr/\btry-with-serial-tests\b/,
+ shell_setup_code => 'am_serial_tests=yes',
},
#
# For each test script in the Automake testsuite that tests features
@@ -287,7 +276,7 @@ while (my ($k, $g) = each %test_generators)
{
my @wrapped_tests = grep {
line_match ($g->{line_matcher}, $_)
- && !line_match ($g->{line_rejecter}, $_)
+ && (!$g->{line_rejecter} || !line_match ($g->{line_rejecter}, $_))
} @all_tests;
foreach my $wrapped_test (@wrapped_tests)
{
diff --git a/syntax-checks.mk b/syntax-checks.mk
index bac6c7b..402e17f 100644
--- a/syntax-checks.mk
+++ b/syntax-checks.mk
@@ -277,10 +277,11 @@ sc_tests_make_without_am_makeflags:
sc_tests_obsolete_variables:
@vars=" \
using_tap \
- parallel_tests \
test_prefer_config_shell \
original_AUTOMAKE \
original_ACLOCAL \
+ parallel_tests \
+ am_parallel_tests \
"; \
seen=""; \
for v in $$vars; do \
@@ -290,7 +291,11 @@ sc_tests_obsolete_variables:
done; \
if test -n "$$seen"; then \
for v in $$seen; do \
- echo "Variable '$$v' is obsolete, use 'am_$$v' instead." 1>&2; \
+ case $$v in \
+ parallel_tests|am_parallel_tests) v2=am_serial_tests;; \
+ *) v2=am_$$v;; \
+ esac; \
+ echo "Variable '$$v' is obsolete, use '$$v2' instead." 1>&2; \
done; \
exit 1; \
else :; fi
diff --git a/t/README b/t/README
index 75dae9e..5f967d2 100644
--- a/t/README
+++ b/t/README
@@ -173,11 +173,16 @@ Do
set-up of a test scenario, you can use the 'framework_fail_' function
instead.
- For tests that use the 'parallel-tests' Automake option, set the shell
- variable 'am_parallel_tests' to "yes" before including ./defs. For
- tests that are *not* meant to work with the 'parallel-tests' Automake
- option (these should be very very few), set the shell variable
- 'am_parallel_tests' to "no" before including ./defs.
+ For those tests checking the Automake-provided test harnesses that are
+ expected to work also when the 'serial-tests' Automake option is used
+ (thus causing the serial testsuite harness to be used in the generated
+ Makefile), place a line containing "try-with-serial-tests" somewhere
+ in the file. That will ensure that the 'gen-testsuite-part' script
+ generates a sibling of that test which uses the serial harness instead
+ of the parallel one. For those tests that are *not* meant to work with
+ the parallel testsuite harness at all (these should be very very few),
+ set the shell variable 'am_serial_tests' to "yes" before including
+ ./defs.
Some tests in the Automake testsuite are auto-generated; those tests
might have custom extensions, but their basename (that is, with such
diff --git a/t/am-tests-environment.sh b/t/am-tests-environment.sh
index 3a6e755..f2931e6 100755
--- a/t/am-tests-environment.sh
+++ b/t/am-tests-environment.sh
@@ -17,7 +17,6 @@
# parallel-tests: check AM_TESTS_ENVIRONMENT support, and its
# interactions with TESTS_ENVIRONMENT.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/ax/tap-summary-aux.sh b/t/ax/tap-summary-aux.sh
index 3848fd1..f5d1fbd 100644
--- a/t/ax/tap-summary-aux.sh
+++ b/t/ax/tap-summary-aux.sh
@@ -16,7 +16,6 @@
# Auxiliary script for tests on TAP support: checking testsuite summary.
-am_parallel_tests=yes
. ./defs || Exit 1
br='============================================================================'
diff --git a/t/ax/testsuite-summary-checks.sh b/t/ax/testsuite-summary-checks.sh
index aed0000..0c8e98c 100644
--- a/t/ax/testsuite-summary-checks.sh
+++ b/t/ax/testsuite-summary-checks.sh
@@ -20,7 +20,6 @@
# testsuite output, packages with and without bug-report addresses,
# testsuites in subdirectories, ...)
-am_parallel_tests=yes
. ./defs || Exit 1
case $use_colors in
diff --git a/t/backcompat5.sh b/t/backcompat5.sh
index 6bfb1c2..fda98f4 100755
--- a/t/backcompat5.sh
+++ b/t/backcompat5.sh
@@ -19,7 +19,7 @@
# This script can also serve as mild stress-testing for Automake.
# See also the similar test 'backcompat6.test'.
-am_parallel_tests=no
+am_serial_tests=yes
am_create_testdir=empty
. ./defs || Exit 1
diff --git a/t/check-concurrency-bug9245.sh b/t/check-concurrency-bug9245.sh
index 064dce2..1cb8422 100755
--- a/t/check-concurrency-bug9245.sh
+++ b/t/check-concurrency-bug9245.sh
@@ -48,15 +48,11 @@ $MAKE -j1 || Exit 77
for j in '' -j1 -j2; do
$MAKE $j check && Exit 1
TESTS=foo.test $MAKE $j -e check && Exit 1
- if test x"$am_parallel_tests" = x"yes"; then
- $MAKE $j recheck && Exit 1
- TEST_LOGS=foo.log $MAKE $j -e check && Exit 1
- rm -f test-suite.log
- $MAKE $j test-suite.log && Exit 1
- test -f test-suite.log || Exit 1
- else
- : # For shells with buggy 'set -e'.
- fi
+ $MAKE $j recheck && Exit 1
+ TEST_LOGS=foo.log $MAKE $j -e check && Exit 1
+ rm -f test-suite.log
+ $MAKE $j test-suite.log && Exit 1
+ test -f test-suite.log || Exit 1
done
:
diff --git a/t/check-exported-srcdir.sh b/t/check-exported-srcdir.sh
index 124269b..c6fda21 100755
--- a/t/check-exported-srcdir.sh
+++ b/t/check-exported-srcdir.sh
@@ -18,11 +18,12 @@
# parallel-tests option enabled) exports the 'srcdir' value in the
# environment of the tests. This is documented in the manual.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
show_info ()
{
- if test x"$am_parallel_tests" = x"yes"; then
+ if test x"$am_serial_tests" != x"yes"; then
cat foo.log
cat test-suite.log
else
diff --git a/t/check-fd-redirect.sh b/t/check-fd-redirect.sh
index 5a64c22..618aa80 100755
--- a/t/check-fd-redirect.sh
+++ b/t/check-fd-redirect.sh
@@ -18,6 +18,7 @@
# AM_TESTS_FD_REDIRECT.
# See also related test 'parallel-tests-fd-redirect.test'.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
cat >> configure.ac << 'END'
@@ -50,7 +51,7 @@ do_check ()
cat stdout
cat stderr >&2
cat four
- test x"$am_parallel_tests" != x"yes" || cat foo.log
+ test x"$am_serial_tests" = x"yes" || cat foo.log
test $st -eq 0
grep '[ /]foo\.test: foofoofoo$' stdout
grep '[ /]foo\.test: barbarbar$' stderr
diff --git a/t/check-no-test-driver.sh b/t/check-no-test-driver.sh
index cccc0ed..84ea325 100755
--- a/t/check-no-test-driver.sh
+++ b/t/check-no-test-driver.sh
@@ -18,7 +18,7 @@
# installed or referenced when the 'parallel-tests' option is not
# used.
-am_parallel_tests=no
+am_serial_tests=yes
. ./defs || Exit 1
echo 'TESTS = foo.test' > Makefile.am
diff --git a/t/check-subst-prog.sh b/t/check-subst-prog.sh
index 30e8763..540c749 100755
--- a/t/check-subst-prog.sh
+++ b/t/check-subst-prog.sh
@@ -17,6 +17,7 @@
# Check @substituted@ TESTS, some of which are also PROGRAMS.
# See also sister test 'check-subst.test'.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
required='cc native'
. ./defs || Exit 1
diff --git a/t/check-subst.sh b/t/check-subst.sh
index 79d7526..ac8fe89 100755
--- a/t/check-subst.sh
+++ b/t/check-subst.sh
@@ -19,6 +19,7 @@
# substituted names: this is necessary for parallel-tests.
# See also sister test 'check-subst-prog.test'.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
cat >> configure.ac << 'END'
@@ -32,7 +33,7 @@ TESTS = pass-script.test xfail-script.test @script_tests@
XFAIL_TESTS = @xfail_tests@
END
-if test "$am_parallel_tests" = yes; then
+if test x"$am_serial_tests" != x"yes"; then
unindent >> Makefile.am <<'END'
TEST_EXTENSIONS = .sh .test
SH_LOG_COMPILER = $(SHELL)
@@ -51,7 +52,7 @@ cp pass-script.test subst-pass-script.sh
cp xfail-script.test subst-xfail-script.sh
chmod a+x pass-script.test xfail-script.test
-if test "$am_parallel_tests" != yes; then
+if test x"$am_serial_tests" = x"yes"; then
chmod a+x subst-pass-script.sh subst-xfail-script.sh
fi
@@ -72,7 +73,7 @@ for vpath in false : ; do
$srcdir/configure
$MAKE all
$MAKE check
- if test "$am_parallel_tests" = yes; then
+ if test x"$am_serial_tests" != x"yes"; then
ls -l
test -f pass-script.log
test -f xfail-script.log
diff --git a/t/check-tests-in-builddir.sh b/t/check-tests-in-builddir.sh
index 9f1fe4a..323c3bc 100755
--- a/t/check-tests-in-builddir.sh
+++ b/t/check-tests-in-builddir.sh
@@ -17,6 +17,7 @@
# Check that the testsuite driver can find test in the srcdir as
# well as in builddir, and that is prefers those in the builddir.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
cat >> configure.ac << 'END'
@@ -55,26 +56,27 @@ $MAKE check >out 2>&1 || { cat out; Exit1; }
cat out
# The simple-tests driver does not strip VPATH components from
# the name of the test, but the parallel-tests driver should.
-if test x"$am_parallel_tests" = x"yes"; then
- grep '\.\./foo' out && Exit 1
- grep '^PASS: foo.test *$' out
+if test x"$am_serial_tests" = x"yes"; then
+ grep '^PASS: .*foo\.test *$' out
else
- grep '^PASS: .*foo.test *$' out
+ grep '\.\./foo' out && Exit 1
+ grep '^PASS: foo\.test *$' out
fi
-grep '^PASS: bar.test *$' out
+grep '^PASS: bar\.test *$' out
rm -f test-suite.log foo.log bar.log
FOO_EXIT_STATUS=1 $MAKE check >out 2>&1 && { cat out; Exit1; }
cat out
-# See comments above.
-if test x"$am_parallel_tests" = x"yes"; then
- grep '\.\./foo' out && Exit 1
- grep '^FAIL: foo.test *$' out
+# The simple-tests driver does not strip VPATH components from
+# the name of the test, but the parallel-tests driver should.
+if test x"$am_serial_tests" = x"yes"; then
+ grep '^FAIL: .*foo\.test *$' out
else
- grep '^FAIL: .*foo.test *$' out
+ grep '\.\./foo' out && Exit 1
+ grep '^FAIL: foo\.test *$' out
fi
-grep '^PASS: bar.test *$' out
+grep '^PASS: bar\.test *$' out
rm -f test-suite.log foo.log bar.log
@@ -83,8 +85,8 @@ rm -f test-suite.log foo.log bar.log
cp bar.test foo.test
FOO_EXIT_STATUS=1 $MAKE check >out 2>&1 || { cat out; Exit1; }
cat out
-grep '^PASS: foo.test *$' out
-grep '^PASS: bar.test *$' out
+grep '^PASS: foo\.test *$' out
+grep '^PASS: bar\.test *$' out
# The tests in the builddir must be preferred also by "make dist".
FOO_EXIT_STATUS=1 $MAKE distcheck
diff --git a/t/check.sh b/t/check.sh
index c9ab0fa..1edd60f 100755
--- a/t/check.sh
+++ b/t/check.sh
@@ -16,15 +16,14 @@
# Test Automake style tests.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
cat > Makefile.am << 'END'
TESTS = frob.test
END
-test x"$am_parallel_tests" != x"yes" || : > test-driver
-
-: > frob.test
+test x"$am_serial_tests" = x"yes" || : > test-driver
$ACLOCAL
$AUTOMAKE
diff --git a/t/check10.sh b/t/check10.sh
index 3b3ee8b..9f436ad 100755
--- a/t/check10.sh
+++ b/t/check10.sh
@@ -17,7 +17,7 @@
# Check singular and plural in test summaries.
# This test only makes sense for the older serial testsuite driver.
-am_parallel_tests=no
+am_serial_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/check11.sh b/t/check11.sh
index e78da0f..fc1209c 100755
--- a/t/check11.sh
+++ b/t/check11.sh
@@ -16,6 +16,7 @@
# Check skip summary.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
cat >> configure.ac << 'END'
@@ -41,20 +42,20 @@ $AUTOMAKE -a
env TESTS=skip $MAKE -e check >stdout || { cat stdout; Exit 1; }
cat stdout
-if test x"$am_parallel_tests" = x"yes"; then
- count_test_results total=1 pass=0 fail=0 skip=1 xfail=0 xpass=0 error=0
-else
+if test x"$am_serial_tests" = x"yes"; then
grep '1.*passed' stdout && Exit 1
: For shells with buggy 'set -e'.
+else
+ count_test_results total=1 pass=0 fail=0 skip=1 xfail=0 xpass=0 error=0
fi
env TESTS="skip skip2" $MAKE -e check >stdout || { cat stdout; Exit 1; }
cat stdout
-if test x"$am_parallel_tests" = x"yes"; then
- count_test_results total=2 pass=0 fail=0 skip=2 xfail=0 xpass=0 error=0
-else
+if test x"$am_serial_tests" = x"yes"; then
grep '2.*passed' stdout && Exit 1
: For shells with buggy 'set -e'.
+else
+ count_test_results total=2 pass=0 fail=0 skip=2 xfail=0 xpass=0 error=0
fi
:
diff --git a/t/check12.sh b/t/check12.sh
index a21c6da..dbb3101 100755
--- a/t/check12.sh
+++ b/t/check12.sh
@@ -17,6 +17,7 @@
# Test to make sure dejagnu tests, automake-style tests, and check-local
# target can coexist.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
required=runtest
. ./defs || Exit 1
@@ -118,8 +119,8 @@ for vpath in : false; do
if $vpath; then
srcdir=..
- mkdir build_
- cd build_
+ mkdir build
+ cd build
else
srcdir=.
fi
@@ -136,7 +137,7 @@ for vpath in : false; do
test -f spanner.log
test -f spanner.sum
# This checks will be run only by the autogenerated 'check12-p.test'.
- if test x"$am_parallel_tests" = x"yes"; then
+ if test x"$am_serial_tests" != x"yes"; then
test -f test-suite.log
test -f a.log
test -f b.log
@@ -168,7 +169,7 @@ for vpath in : false; do
B_EXIT_STATUS=1 $MAKE check && Exit 1
# This checks will be run only by the autogenerated 'check12-p.test'.
- if test x"$am_parallel_tests" = x"yes"; then
+ if test x"$am_serial_tests" != x"yes"; then
cat test-suite.log
cat a.log
cat b.log
@@ -192,7 +193,7 @@ for vpath in : false; do
grep 'FAIL: test_hammer' hammer.sum
grep 'FAIL:' spanner.sum && Exit 1
# This checks will be run only by the autogenerated 'check12-p.test'.
- if test x"$am_parallel_tests" = x"yes"; then
+ if test x"$am_serial_tests" != x"yes"; then
cat test-suite.log
cat a.log
cat b.log
diff --git a/t/check2.sh b/t/check2.sh
index 8a05c9c..73eb0b7 100755
--- a/t/check2.sh
+++ b/t/check2.sh
@@ -16,6 +16,7 @@
# Test Automake style tests.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
cat >> configure.ac << 'END'
@@ -43,9 +44,7 @@ echo.sh:
CLEANFILES = echo.sh
END
-if test x"$am_parallel_tests" = x"yes"; then
- cp "$am_scriptdir/test-driver" .
-fi
+test x"$am_serial_tests" = x"yes" || cp "$am_scriptdir/test-driver" .
$ACLOCAL
$AUTOCONF
diff --git a/t/check3.sh b/t/check3.sh
index 3edfd98..69b6a67 100755
--- a/t/check3.sh
+++ b/t/check3.sh
@@ -17,6 +17,7 @@
# Make sure 'check:' and 'install:' honor $(BUILT_SOURCES).
# PR/359.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/check4.sh b/t/check4.sh
index 26548b3..78415e0 100755
--- a/t/check4.sh
+++ b/t/check4.sh
@@ -16,6 +16,7 @@
# Make sure 'make -k check' processes all directories.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/check5.sh b/t/check5.sh
index 31790f8..8865f3e 100755
--- a/t/check5.sh
+++ b/t/check5.sh
@@ -16,6 +16,7 @@
# Test TESTS = $(check_PROGRAMS)
+# For gen-testsuite-part: ==> try-with-serial-tests <==
required='cc native'
. ./defs || Exit 1
diff --git a/t/check6.sh b/t/check6.sh
index b6f6a67..0f33f8d 100755
--- a/t/check6.sh
+++ b/t/check6.sh
@@ -17,6 +17,7 @@
# Test for PR 400: XFAIL_TESTS delimited by TABs.
# Also test that Solaris make VPATH rewriting is honored
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/check7.sh b/t/check7.sh
index 574569b..54d2b2b 100755
--- a/t/check7.sh
+++ b/t/check7.sh
@@ -16,6 +16,7 @@
# Check EXEEXT extension for XFAIL_TESTS.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
required=cc
. ./defs || Exit 1
diff --git a/t/check8.sh b/t/check8.sh
index 75a4bef..d33c002 100755
--- a/t/check8.sh
+++ b/t/check8.sh
@@ -16,6 +16,7 @@
# Check subdir TESTS.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
required='cc native'
. ./defs || Exit 1
diff --git a/t/color.sh b/t/color.sh
index c9a1ab9..6f5c902 100755
--- a/t/color.sh
+++ b/t/color.sh
@@ -17,6 +17,7 @@
# Test Automake TESTS color output, by forcing it.
# Keep this in sync with the sister test 'color2.test'.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
esc=''
@@ -85,10 +86,10 @@ test_color ()
cat stdout | grep "^${red}XPASS${std}: .*xpass"
# The old serial testsuite driver doesn't distinguish between failures
# and hard errors.
- if test x"$am_parallel_tests" = x"yes"; then
- cat stdout | grep "^${mgn}ERROR${std}: .*error"
- else
+ if test x"$am_serial_tests" = x"yes"; then
cat stdout | grep "^${red}FAIL${std}: .*error"
+ else
+ cat stdout | grep "^${mgn}ERROR${std}: .*error"
fi
:
}
diff --git a/t/color2.sh b/t/color2.sh
index 75f5034..b073d5c 100755
--- a/t/color2.sh
+++ b/t/color2.sh
@@ -17,6 +17,7 @@
# Test Automake TESTS color output, using the expect(1) program.
# Keep this in sync with the sister test 'color.test'.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
esc=''
@@ -115,10 +116,10 @@ test_color ()
cat stdout | grep "^${red}XPASS${std}: .*xpass"
# The old serial testsuite driver doesn't distinguish between failures
# and hard errors.
- if test x"$am_parallel_tests" = x"yes"; then
- cat stdout | grep "^${mgn}ERROR${std}: .*error"
- else
+ if test x"$am_serial_tests" = x"yes"; then
cat stdout | grep "^${red}FAIL${std}: .*error"
+ else
+ cat stdout | grep "^${mgn}ERROR${std}: .*error"
fi
:
}
diff --git a/t/cygnus-imply-foreign.sh b/t/cygnus-imply-foreign.sh
index 3dcf671..1173a47 100755
--- a/t/cygnus-imply-foreign.sh
+++ b/t/cygnus-imply-foreign.sh
@@ -50,7 +50,7 @@ mv -f Makefile.sav Makefile.am
# Try again, this time enabling cygnus mode from configure.ac.
cp configure.ac configure.sav
-sed 's/^AM_INIT_AUTOMAKE$/&([gnits cygnus])/' configure.sav >configure.ac
+sed 's/^AM_INIT_AUTOMAKE/&([gnits cygnus])/' configure.sav >configure.ac
cmp configure.ac configure.sav && fatal_ 'failed to edit configure.ac'
$ACLOCAL --force
diff --git a/t/dejagnu.sh b/t/dejagnu.sh
index 14b118c..583158f 100755
--- a/t/dejagnu.sh
+++ b/t/dejagnu.sh
@@ -24,7 +24,7 @@ AUTOMAKE_OPTIONS = dejagnu
TESTS = frob.test
END
-test x"$am_parallel_tests" != x"yes" || : > test-driver
+test x"$am_serial_tests" = x"yes" || : > test-driver
$ACLOCAL
$AUTOMAKE
diff --git a/t/dist-auxdir-many-subdirs.sh b/t/dist-auxdir-many-subdirs.sh
index db9aa94..f84514a 100755
--- a/t/dist-auxdir-many-subdirs.sh
+++ b/t/dist-auxdir-many-subdirs.sh
@@ -18,7 +18,6 @@
# same config-aux files.
am_create_testdir=empty
-am_parallel_tests=yes
required=cc
. ./defs || Exit 1
diff --git a/t/distcheck-pr10470.sh b/t/distcheck-pr10470.sh
index 1b6a322..e4d8252 100755
--- a/t/distcheck-pr10470.sh
+++ b/t/distcheck-pr10470.sh
@@ -19,7 +19,6 @@
# by a process (e.g., that is its "current working directory").
# See automake bug#10470.
-am_parallel_tests=no
. ./defs || Exit 1
mkdir foo.d
diff --git a/t/exeext4.sh b/t/exeext4.sh
index 298879d..d9099b6 100755
--- a/t/exeext4.sh
+++ b/t/exeext4.sh
@@ -17,6 +17,7 @@
# Make sure $(EXEEXT) is appended to programs and to tests that are
# programs, but not to @address@hidden
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/java-compile-run-flat.sh b/t/java-compile-run-flat.sh
index 79083af..9f3c184 100755
--- a/t/java-compile-run-flat.sh
+++ b/t/java-compile-run-flat.sh
@@ -24,7 +24,7 @@
# 'parallel-tests' driver.
required='java javac'
-am_parallel_tests=no
+am_serial_tests=yes
. ./defs || Exit 1
echo "AC_SUBST([PATH_SEPARATOR], ['$PATH_SEPARATOR'])" >> configure.ac
diff --git a/t/java-compile-run-nested.sh b/t/java-compile-run-nested.sh
index d4a7800..61727f7 100755
--- a/t/java-compile-run-nested.sh
+++ b/t/java-compile-run-nested.sh
@@ -25,7 +25,6 @@
# of the older non-parallel 'simple-tests' driver.
required='java javac'
-am_parallel_tests=yes
. ./defs || Exit 1
echo "AC_SUBST([PATH_SEPARATOR], ['$PATH_SEPARATOR'])" >> configure.ac
diff --git a/t/make-dryrun.tap b/t/make-dryrun.tap
index 3769205..2172124 100755
--- a/t/make-dryrun.tap
+++ b/t/make-dryrun.tap
@@ -16,7 +16,6 @@
# Check that $(am__make_dryrun) works as expected.
-am_parallel_tests=yes # Avoid generation of a useless wrapper test.
. ./defs || Exit 1
plan_ 14
diff --git a/t/maken3.sh b/t/maken3.sh
index 2018549..832bdcf 100755
--- a/t/maken3.sh
+++ b/t/maken3.sh
@@ -24,6 +24,7 @@
# This test exercises the GCS-mandated targets (except for dist)
# as well as tags, TAGS.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
# Does $MAKE support the '.MAKE' special target?
diff --git a/t/parallel-tests-cmdline-override.sh
b/t/parallel-tests-cmdline-override.sh
index 86b0c94..5c48640 100755
--- a/t/parallel-tests-cmdline-override.sh
+++ b/t/parallel-tests-cmdline-override.sh
@@ -17,7 +17,6 @@
# Check that we can use indirections when overriding TESTS and
# TEST_LOGS from the command line.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-console-output.sh
b/t/parallel-tests-console-output.sh
index ac43b25..5a78efd 100755
--- a/t/parallel-tests-console-output.sh
+++ b/t/parallel-tests-console-output.sh
@@ -17,7 +17,6 @@
# parallel-tests: some checks on console output about testsuite
# progress.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-driver-install.sh
b/t/parallel-tests-driver-install.sh
index b538799..fcfa38d 100755
--- a/t/parallel-tests-driver-install.sh
+++ b/t/parallel-tests-driver-install.sh
@@ -17,7 +17,6 @@
# Check that auxiliary script 'test-driver' gets automatically installed
# in the correct directory by 'parallel-tests' option.
-am_parallel_tests=yes
. ./defs || Exit 1
: Try first with parallel-tests defined in AM_INIT_AUTOMAKE.
diff --git a/t/parallel-tests-dry-run-1.sh b/t/parallel-tests-dry-run-1.sh
index b094c18..6fdcb98 100755
--- a/t/parallel-tests-dry-run-1.sh
+++ b/t/parallel-tests-dry-run-1.sh
@@ -17,7 +17,6 @@
# Check parallel-tests interactions with "make -n".
# See also sister test 'parallel-tests-dry-run-2.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
echo AC_OUTPUT >> configure.ac
diff --git a/t/parallel-tests-dry-run-2.sh b/t/parallel-tests-dry-run-2.sh
index 0d13677..20ccb5d 100755
--- a/t/parallel-tests-dry-run-2.sh
+++ b/t/parallel-tests-dry-run-2.sh
@@ -17,7 +17,6 @@
# Check parallel-tests interactions with "make -n".
# See also sister test 'parallel-tests-dry-run-1.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-empty-testlogs.sh
b/t/parallel-tests-empty-testlogs.sh
index 0ea6db8..619eae5 100755
--- a/t/parallel-tests-empty-testlogs.sh
+++ b/t/parallel-tests-empty-testlogs.sh
@@ -18,7 +18,6 @@
# - empty TESTS
# - empty TEST_LOGS
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-exeext.sh b/t/parallel-tests-exeext.sh
index e93f5f1..5a3af46 100755
--- a/t/parallel-tests-exeext.sh
+++ b/t/parallel-tests-exeext.sh
@@ -17,7 +17,6 @@
# parallel-tests:
# - check2.am and interaction with $(EXEEXT)
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-exit-statuses.sh
b/t/parallel-tests-exit-statuses.sh
index 688ff84..90583d5 100755
--- a/t/parallel-tests-exit-statuses.sh
+++ b/t/parallel-tests-exit-statuses.sh
@@ -17,7 +17,6 @@
# Check parallel-tests features: normal and special exit statuses
# in the test scripts.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-extra-programs.sh
b/t/parallel-tests-extra-programs.sh
index d95d184..c9d13da 100755
--- a/t/parallel-tests-extra-programs.sh
+++ b/t/parallel-tests-extra-programs.sh
@@ -18,7 +18,6 @@
# (or even be) $(EXTRA_PROGRAMS).
required='cc native'
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-fd-redirect-exeext.sh
b/t/parallel-tests-fd-redirect-exeext.sh
index 56d7f59..5683658 100755
--- a/t/parallel-tests-fd-redirect-exeext.sh
+++ b/t/parallel-tests-fd-redirect-exeext.sh
@@ -22,7 +22,6 @@
# sister test 'parallel-tests-fd-redirect.test'.
required='cc native'
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-fd-redirect.sh b/t/parallel-tests-fd-redirect.sh
index cf7acce..d2dba94 100755
--- a/t/parallel-tests-fd-redirect.sh
+++ b/t/parallel-tests-fd-redirect.sh
@@ -20,7 +20,6 @@
# check for tests that are binary executables.
# See also the more generic test 'check-fd-redirect.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-fork-bomb.sh b/t/parallel-tests-fork-bomb.sh
index ceeeabe..108d6ea 100755
--- a/t/parallel-tests-fork-bomb.sh
+++ b/t/parallel-tests-fork-bomb.sh
@@ -18,7 +18,6 @@
# - If $(TEST_SUITE_LOG) is in $(TEST_LOGS), we get a diagnosed
# error, not a make hang or a system freeze.
-am_parallel_tests=yes
. ./defs || Exit 1
# We don't want localized error messages from make, since we'll have
diff --git a/t/parallel-tests-harderror.sh b/t/parallel-tests-harderror.sh
index 7b66251..fc7a3c3 100755
--- a/t/parallel-tests-harderror.sh
+++ b/t/parallel-tests-harderror.sh
@@ -16,7 +16,6 @@
# Check parallel-tests features: DISABLE_HARD_ERRORS
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-interrupt.tap b/t/parallel-tests-interrupt.tap
index 39a04a7..afc1956 100755
--- a/t/parallel-tests-interrupt.tap
+++ b/t/parallel-tests-interrupt.tap
@@ -19,7 +19,6 @@
# but we couldn't find a better way to deal with inter-processes
# signals and the whole process-synchronization mess.
-am_parallel_tests=yes
. ./defs || Exit 1
plan_ 16
diff --git a/t/parallel-tests-log-compiler-1.sh
b/t/parallel-tests-log-compiler-1.sh
index 77bdac4..1f16d9f 100755
--- a/t/parallel-tests-log-compiler-1.sh
+++ b/t/parallel-tests-log-compiler-1.sh
@@ -19,7 +19,6 @@
# and xxx_LOG_FLAGS), also with AC_SUBST'd stuff.
# See also related test 'parallel-tests-log-compiler-2.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-log-compiler-2.sh
b/t/parallel-tests-log-compiler-2.sh
index 7443e26..72fba68 100755
--- a/t/parallel-tests-log-compiler-2.sh
+++ b/t/parallel-tests-log-compiler-2.sh
@@ -19,7 +19,6 @@
# and xxx_LOG_FLAGS), when some tests are PROGRAMS.
# See also related test 'parallel-tests-log-compiler-1.test'.
-am_parallel_tests=yes
required='cc native'
. ./defs || Exit 1
diff --git a/t/parallel-tests-log-compiler-example.sh
b/t/parallel-tests-log-compiler-example.sh
index 8b45758..60dd7bd 100755
--- a/t/parallel-tests-log-compiler-example.sh
+++ b/t/parallel-tests-log-compiler-example.sh
@@ -17,7 +17,6 @@
# Test the example of usage of generic and extension-specific
# LOG_COMPILER and LOG_FLAGS given in the manual.
-am_parallel_tests=yes
required=python
. ./defs || Exit 1
diff --git a/t/parallel-tests-log-override-1.sh
b/t/parallel-tests-log-override-1.sh
index f76d193..55f6082 100755
--- a/t/parallel-tests-log-override-1.sh
+++ b/t/parallel-tests-log-override-1.sh
@@ -16,7 +16,6 @@
# Check parallel-tests features: runtime redefinition of $(TEST_SUITE_LOG).
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac <<'END'
diff --git a/t/parallel-tests-log-override-2.sh
b/t/parallel-tests-log-override-2.sh
index ca0b59f..eccefcc 100755
--- a/t/parallel-tests-log-override-2.sh
+++ b/t/parallel-tests-log-override-2.sh
@@ -18,7 +18,6 @@
# - $(TEST_SUITE_LOG) and $(TESTS)
# - $(TEST_SUITE_LOG) and $(TEST_LOGS)
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac <<'END'
diff --git a/t/parallel-tests-log-override-recheck.sh
b/t/parallel-tests-log-override-recheck.sh
index c7c1b2b..5fc39a4 100755
--- a/t/parallel-tests-log-override-recheck.sh
+++ b/t/parallel-tests-log-override-recheck.sh
@@ -17,7 +17,6 @@
# Check parallel-tests features: runtime redefinition of $(TEST_SUITE_LOG)
# for the recheck target.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac <<'END'
diff --git a/t/parallel-tests-many.sh b/t/parallel-tests-many.sh
index a09dbe5..65db6e6 100755
--- a/t/parallel-tests-many.sh
+++ b/t/parallel-tests-many.sh
@@ -18,7 +18,6 @@
# an exceeded command line length when there are many tests.
# For automake bug#7868. This test is currently expected to fail.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-no-color-in-log.sh
b/t/parallel-tests-no-color-in-log.sh
index 17115b9..69414f7 100755
--- a/t/parallel-tests-no-color-in-log.sh
+++ b/t/parallel-tests-no-color-in-log.sh
@@ -16,7 +16,6 @@
# Colorized output from the testsuite report shouldn't end up in log files.
-am_parallel_tests=yes
. ./defs || Exit 1
esc=''
diff --git a/t/parallel-tests-no-spurious-summary.sh
b/t/parallel-tests-no-spurious-summary.sh
index 62b4ef6..6400b3b 100755
--- a/t/parallel-tests-no-spurious-summary.sh
+++ b/t/parallel-tests-no-spurious-summary.sh
@@ -17,7 +17,6 @@
# Check that ':test-results:' directives in test scripts' output doesn't
# originate spurious results in the testsuite summary.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-once.sh b/t/parallel-tests-once.sh
index 53ee677..51912fb 100755
--- a/t/parallel-tests-once.sh
+++ b/t/parallel-tests-once.sh
@@ -18,7 +18,6 @@
# clean directory. An early implementation of the '.trs' intermediate
# files incurred a similar problem.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-recheck-depends-on-all.sh
b/t/parallel-tests-recheck-depends-on-all.sh
index 6c9e4cb..9464a36 100755
--- a/t/parallel-tests-recheck-depends-on-all.sh
+++ b/t/parallel-tests-recheck-depends-on-all.sh
@@ -17,7 +17,6 @@
# The parallel-tests 'recheck' target must depend on the 'all' target.
# See automake bug#11252.
-am_parallel_tests=yes
required='cc native'
. ./defs || Exit 1
diff --git a/t/parallel-tests-reset-term.sh b/t/parallel-tests-reset-term.sh
index 53e542c..cf9fb6c 100755
--- a/t/parallel-tests-reset-term.sh
+++ b/t/parallel-tests-reset-term.sh
@@ -17,7 +17,6 @@
# Check that the parallel-tests driver correctly handle overrides of the
# TERM variable by either TESTS_ENVIRONMENT and AM_TESTS_ENVIRONMENT.
-am_parallel_tests=yes
. ./defs || Exit 1
esc='['
diff --git a/t/parallel-tests-subdir.sh b/t/parallel-tests-subdir.sh
index 6848edb..2698a53 100755
--- a/t/parallel-tests-subdir.sh
+++ b/t/parallel-tests-subdir.sh
@@ -17,7 +17,6 @@
# Check that the parallel-tests driver creates parent directories for
# the log files when needed.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-suffix-prog.sh b/t/parallel-tests-suffix-prog.sh
index abd4a5c..28dd349 100755
--- a/t/parallel-tests-suffix-prog.sh
+++ b/t/parallel-tests-suffix-prog.sh
@@ -18,7 +18,6 @@
# - suffix rules, with PROGRAMS involved
# See also sister test 'parallel-tests-suffix.test'.
-am_parallel_tests=yes
required='cc native'
. ./defs || Exit 1
diff --git a/t/parallel-tests-suffix.sh b/t/parallel-tests-suffix.sh
index bd72d0d..9e9e843 100755
--- a/t/parallel-tests-suffix.sh
+++ b/t/parallel-tests-suffix.sh
@@ -18,7 +18,6 @@
# - suffix rules
# See also sister test 'parallel-tests-suffix-prog.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests-trailing-bslash.sh
b/t/parallel-tests-trailing-bslash.sh
index 4b3bdf8..1291764 100755
--- a/t/parallel-tests-trailing-bslash.sh
+++ b/t/parallel-tests-trailing-bslash.sh
@@ -19,7 +19,6 @@
# older bash versions (e.g., bash 2.05b).
# See automake bug#10436.
-am_parallel_tests=yes
. ./defs || Exit 1
echo AC_OUTPUT >> configure.ac
diff --git a/t/parallel-tests-unreadable.sh b/t/parallel-tests-unreadable.sh
index 7ddb9db..98591e6 100755
--- a/t/parallel-tests-unreadable.sh
+++ b/t/parallel-tests-unreadable.sh
@@ -17,7 +17,6 @@
# Check that the testsuite driver copes well with unreadable '.log'
# and '.trs' files.
-am_parallel_tests=yes
. ./defs || Exit 1
: > t
diff --git a/t/parallel-tests.sh b/t/parallel-tests.sh
index 891d7bd..459a24d 100755
--- a/t/parallel-tests.sh
+++ b/t/parallel-tests.sh
@@ -23,7 +23,6 @@
# - TEST_LOGS redefinition at runtime
# - RECHECK_LOGS redefinition at runtime
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests10.sh b/t/parallel-tests10.sh
index 2396482..9746024 100755
--- a/t/parallel-tests10.sh
+++ b/t/parallel-tests10.sh
@@ -18,7 +18,6 @@
# - trailing whitespace in TESTS
# GNU make 3.80 may expand trailing white space to '.log'.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests2.sh b/t/parallel-tests2.sh
index 73daf43..d54b9e8 100755
--- a/t/parallel-tests2.sh
+++ b/t/parallel-tests2.sh
@@ -20,7 +20,6 @@
# FIXME: the features tested by this script has been moved in contrib.
# FIXME: We should move this script accordingly.
-am_parallel_tests=yes
. ./defs || Exit 1
# Try the variants that are tried in check-html.am.
diff --git a/t/parallel-tests3.sh b/t/parallel-tests3.sh
index 98467e6..8e3be0e 100755
--- a/t/parallel-tests3.sh
+++ b/t/parallel-tests3.sh
@@ -17,7 +17,6 @@
# Check parallel-tests features:
# - concurrent parallel execution
-am_parallel_tests=yes
. ./defs || Exit 1
case $MAKE in
diff --git a/t/parallel-tests5.sh b/t/parallel-tests5.sh
index 9f0a966..bb5a876 100755
--- a/t/parallel-tests5.sh
+++ b/t/parallel-tests5.sh
@@ -20,7 +20,6 @@
# Actually, this test doesn't ensure that things happen concurrently.
# It merely serves as demonstration. :-)
-am_parallel_tests=yes
required='cc native GNUmake'
. ./defs || Exit 1
diff --git a/t/parallel-tests6.sh b/t/parallel-tests6.sh
index eee6538..46b455c 100755
--- a/t/parallel-tests6.sh
+++ b/t/parallel-tests6.sh
@@ -19,7 +19,6 @@
# BSD make will expand '$(TESTS:=.log)' to '.log' unless overridden.
# See parallel-tests10.test for a similar issue.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
AC_OUTPUT
diff --git a/t/parallel-tests8.sh b/t/parallel-tests8.sh
index 8e35b6b..7363929 100755
--- a/t/parallel-tests8.sh
+++ b/t/parallel-tests8.sh
@@ -24,7 +24,6 @@
# manual for the ugliness in this area, when VPATH comes into
# play. :-/
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/parallel-tests9.sh b/t/parallel-tests9.sh
index f22be8d..42d0e2d 100755
--- a/t/parallel-tests9.sh
+++ b/t/parallel-tests9.sh
@@ -17,7 +17,6 @@
# Check parallel-tests features:
# - recheck
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/posixsubst-tests.sh b/t/posixsubst-tests.sh
index 27a451d..a51176b 100755
--- a/t/posixsubst-tests.sh
+++ b/t/posixsubst-tests.sh
@@ -17,6 +17,7 @@
# Test that POSIX variable expansion '$(var:str=rpl)' works when used
# with the TESTS special variable.
+# For gen-testsuite-part: ==> try-with-serial-tests <==
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/pr401.sh b/t/pr401.sh
index a143498..849ee5f 100755
--- a/t/pr401.sh
+++ b/t/pr401.sh
@@ -17,7 +17,6 @@
# Check support for AC_CONFIG_LIBOBJ_DIR vs LIBOBJS.
# (pr401b.test and pr401c.test do the same for LTLIBOBJS and ALLOCA)
-am_parallel_tests=no
required=cc
. ./defs || Exit 1
@@ -83,7 +82,7 @@ cp "$am_scriptdir/ar-lib" . || fatal_ "fetching auxiliary
script 'ar-lib'"
$ACLOCAL
$AUTOCONF
-$AUTOMAKE
+$AUTOMAKE -a
./configure
$MAKE distcheck
diff --git a/t/pr401b.sh b/t/pr401b.sh
index 3d15671..382d118 100755
--- a/t/pr401b.sh
+++ b/t/pr401b.sh
@@ -17,7 +17,6 @@
# Check support for AC_CONFIG_LIBOBJ_DIR vs LTLIBOBJS.
# (pr401.test and pr401c.test do the same for LIBOBJS and ALLOCA)
-am_parallel_tests=no
required='cc libtoolize'
. ./defs || Exit 1
diff --git a/t/pr401c.sh b/t/pr401c.sh
index 1f238f6..12afade 100755
--- a/t/pr401c.sh
+++ b/t/pr401c.sh
@@ -17,14 +17,12 @@
# Check support for AC_CONFIG_LIBOBJ_DIR vs ALLOCA.
# (pr401.test and pr401b.test do the same for LIBOBJS and LTLIBOBJS)
-am_parallel_tests=no
required=cc
. ./defs || Exit 1
mkdir lib src
-ac_cv_func_alloca_works=no
-export ac_cv_func_alloca_works
+ac_cv_func_alloca_works=no; export ac_cv_func_alloca_works
cat >lib/alloca.c <<'EOF'
const char *feep (void)
@@ -85,7 +83,7 @@ cp "$am_scriptdir/ar-lib" . || fatal_ "fetching auxiliary
script 'ar-lib'"
$ACLOCAL
$AUTOCONF
-$AUTOMAKE
+$AUTOMAKE -a
./configure
$MAKE distcheck
diff --git a/t/self-check-env-sanitize.tap b/t/self-check-env-sanitize.tap
index bc78186..c6ac980 100755
--- a/t/self-check-env-sanitize.tap
+++ b/t/self-check-env-sanitize.tap
@@ -29,7 +29,7 @@ plan_ 18 # Two times the number of variable names in $vars.
vars='
me
required
- am_parallel_tests
+ am_serial_tests
am_using_tap
am_create_testdir
am_tap_implementation
diff --git a/t/serial-tests.sh b/t/serial-tests.sh
index 680513f..4ec4710 100755
--- a/t/serial-tests.sh
+++ b/t/serial-tests.sh
@@ -16,8 +16,6 @@
# Option 'serial-tests'.
-# To avoid useless generation of a sibling test.
-am_parallel_tests=yes
am_create_testdir=empty
. ./defs || Exit 1
@@ -38,7 +36,7 @@ has_parallel_tests ()
mkdir one two
-cat >> one/configure.ac <<END
+cat > one/configure.ac <<END
AC_INIT([$me], [1.0])
AM_INIT_AUTOMAKE([serial-tests])
AC_CONFIG_FILES([Makefile])
@@ -46,7 +44,7 @@ END
echo 'TESTS = foo.test bar.test' > one/Makefile.am
-cat >> two/configure.ac <<END
+cat > two/configure.ac <<END
AC_INIT([$me], [2.0])
AC_CONFIG_AUX_DIR([config])
AM_INIT_AUTOMAKE([parallel-tests])
diff --git a/t/tap-ambiguous-directive.sh b/t/tap-ambiguous-directive.sh
index 32b1b80..75a259c 100755
--- a/t/tap-ambiguous-directive.sh
+++ b/t/tap-ambiguous-directive.sh
@@ -18,7 +18,6 @@
# - handling of "ambiguous" TODO and SKIP directives
# See also related test 'tap-todo-skip-together.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-autonumber.sh b/t/tap-autonumber.sh
index 4e88f3d..8771ddf 100755
--- a/t/tap-autonumber.sh
+++ b/t/tap-autonumber.sh
@@ -20,7 +20,6 @@
# - test results without number get automatically numbered in the
# console progress output
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-bad-prog.tap b/t/tap-bad-prog.tap
index 580e7d3..82cf4e4 100755
--- a/t/tap-bad-prog.tap
+++ b/t/tap-bad-prog.tap
@@ -18,7 +18,6 @@
# - missing, unreadable, or not-executable test scripts cause proper
# error reports
-am_parallel_tests=yes
. ./defs || Exit 1
fetch_tap_driver
diff --git a/t/tap-bailout-and-logging.sh b/t/tap-bailout-and-logging.sh
index cc95d98..e8e3756 100755
--- a/t/tap-bailout-and-logging.sh
+++ b/t/tap-bailout-and-logging.sh
@@ -18,7 +18,6 @@
# - even after a "Bail out!" directive, all input is still copied in
# the log file
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-bailout-leading-space.sh b/t/tap-bailout-leading-space.sh
index 94084d4..bd0d1fc 100755
--- a/t/tap-bailout-leading-space.sh
+++ b/t/tap-bailout-leading-space.sh
@@ -20,7 +20,6 @@
# perl implementation of the Automake TAP driver, but expect the latter,
# "more modern" behaviour in our awk TAP driver.
-am_parallel_tests=yes
am_tap_implementation=shell
. ./defs || Exit 1
diff --git a/t/tap-bailout-suppress-badexit.sh
b/t/tap-bailout-suppress-badexit.sh
index 1962639..c7e55db 100755
--- a/t/tap-bailout-suppress-badexit.sh
+++ b/t/tap-bailout-suppress-badexit.sh
@@ -18,7 +18,6 @@
# - A "Bail out!" directive causes the driver to ignore the exit
# status of the test script.
-am_parallel_tests=yes
. ./defs || Exit 1
tests='exit.test exit127.test sighup.test sigterm.test'
diff --git a/t/tap-bailout-suppress-later-diagnostic.sh
b/t/tap-bailout-suppress-later-diagnostic.sh
index 9bc29de..bff4d64 100755
--- a/t/tap-bailout-suppress-later-diagnostic.sh
+++ b/t/tap-bailout-suppress-later-diagnostic.sh
@@ -18,7 +18,6 @@
# - A "Bail out!" directive causes the driver to ignore any TAP
# diagnostic message in the rest of the following TAP stream.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-bailout-suppress-later-errors.sh
b/t/tap-bailout-suppress-later-errors.sh
index e6cc6c2..ff83887 100755
--- a/t/tap-bailout-suppress-later-errors.sh
+++ b/t/tap-bailout-suppress-later-errors.sh
@@ -18,7 +18,6 @@
# - A "Bail out!" directive causes the driver to ignore any TAP
# result or error in the rest of the following TAP stream.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-bailout.sh b/t/tap-bailout.sh
index 0def87e..317eaa2 100755
--- a/t/tap-bailout.sh
+++ b/t/tap-bailout.sh
@@ -17,7 +17,6 @@
# Basic TAP test protocol support:
# - "Bail out!" magic
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-basic.sh b/t/tap-basic.sh
index 3d6d8fe..c19c326 100755
--- a/t/tap-basic.sh
+++ b/t/tap-basic.sh
@@ -24,7 +24,6 @@
# Note that some of the features checked here are checked in other
# test cases too, usually in a more thorough and detailed way.
-am_parallel_tests=yes
. ./defs || Exit 1
fetch_tap_driver
diff --git a/t/tap-color.sh b/t/tap-color.sh
index b803306..6a91f06 100755
--- a/t/tap-color.sh
+++ b/t/tap-color.sh
@@ -17,7 +17,6 @@
# TAP support:
# - colorization of TAP results and diagnostic messages
-am_parallel_tests=yes
. ./defs || Exit 1
esc=''
diff --git a/t/tap-common-setup.sh b/t/tap-common-setup.sh
index b14099a..8400da0 100755
--- a/t/tap-common-setup.sh
+++ b/t/tap-common-setup.sh
@@ -16,7 +16,6 @@
# Auxiliary test to set up common data used by many tests on TAP support.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << END
diff --git a/t/tap-deps.sh b/t/tap-deps.sh
index 5049171..6ebe0f9 100755
--- a/t/tap-deps.sh
+++ b/t/tap-deps.sh
@@ -17,7 +17,6 @@
# Basic TAP test protocol support:
# - dependencies between test scripts
-am_parallel_tests=yes
. ./defs || Exit 1
cat > Makefile.am << 'END'
diff --git a/t/tap-diagnostic-custom.sh b/t/tap-diagnostic-custom.sh
index d3f28a5..c90f46f 100755
--- a/t/tap-diagnostic-custom.sh
+++ b/t/tap-diagnostic-custom.sh
@@ -18,7 +18,6 @@
# - option '--diagnostic-string' to customize the string introducing
# TAP diagnostics
-am_parallel_tests=yes
. ./defs || Exit 1
fetch_tap_driver
diff --git a/t/tap-diagnostic.sh b/t/tap-diagnostic.sh
index 31f5df6..c849d65 100755
--- a/t/tap-diagnostic.sh
+++ b/t/tap-diagnostic.sh
@@ -18,7 +18,6 @@
# - diagnostic messages (TAP lines with leading "#")
# - flags '--comments' and '--no-comments' of the TAP test driver
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-doc.sh b/t/tap-doc.sh
index 46b3b51..22d542f 100755
--- a/t/tap-doc.sh
+++ b/t/tap-doc.sh
@@ -17,7 +17,6 @@
# Check that an example given in the documentation really works.
# See section "Simple Tests" subsection "Script-based Testsuites".
-am_parallel_tests=yes
. ./defs || Exit 1
fetch_tap_driver
diff --git a/t/tap-doc2.sh b/t/tap-doc2.sh
index 2232712..0607112 100755
--- a/t/tap-doc2.sh
+++ b/t/tap-doc2.sh
@@ -19,7 +19,6 @@
# with the Automake test harness".
am_create_testdir=empty
-am_parallel_tests=yes
. ./defs || Exit 1
cat > Makefile.am <<'END'
diff --git a/t/tap-driver-stderr.sh b/t/tap-driver-stderr.sh
index 879d051..bb54ebf 100755
--- a/t/tap-driver-stderr.sh
+++ b/t/tap-driver-stderr.sh
@@ -18,7 +18,6 @@
# - error messages from awk/shell/perl goes to the console
required=non-root
-am_parallel_tests=yes
am_create_testdir=empty
. ./defs || Exit 1
diff --git a/t/tap-empty-diagnostic.sh b/t/tap-empty-diagnostic.sh
index 1a8a99b..e3f1e15 100755
--- a/t/tap-empty-diagnostic.sh
+++ b/t/tap-empty-diagnostic.sh
@@ -17,7 +17,6 @@
# TAP support:
# - empty diagnostic messages are discarder
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-empty.sh b/t/tap-empty.sh
index 4d3bfda..bad40ed 100755
--- a/t/tap-empty.sh
+++ b/t/tap-empty.sh
@@ -18,7 +18,6 @@
# - empty TAP input
# - blank TAP input
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-escape-directive-2.sh b/t/tap-escape-directive-2.sh
index 595c384..1c72f79 100755
--- a/t/tap-escape-directive-2.sh
+++ b/t/tap-escape-directive-2.sh
@@ -17,7 +17,6 @@
# TAP support:
# - "escape" TODO and SKIP directives (by escaping the "#" character)
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-escape-directive.sh b/t/tap-escape-directive.sh
index 8b24251..6067af2 100755
--- a/t/tap-escape-directive.sh
+++ b/t/tap-escape-directive.sh
@@ -17,7 +17,6 @@
# TAP support:
# - "escape" TODO and SKIP directives (by escaping the "#" character)
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-exit.sh b/t/tap-exit.sh
index abc1ace..2717976 100755
--- a/t/tap-exit.sh
+++ b/t/tap-exit.sh
@@ -19,7 +19,6 @@
# - the '--ignore-exit' option causes the TAP test driver to ignore
# exit statuses of the test scripts.
-am_parallel_tests=yes
. ./defs || Exit 1
echo TESTS = > Makefile.am
diff --git a/t/tap-fancy.sh b/t/tap-fancy.sh
index 6815ac5..846a9d0 100755
--- a/t/tap-fancy.sh
+++ b/t/tap-fancy.sh
@@ -17,7 +17,6 @@
# TAP support: some unusual forms for valid TAP input.
# See also related test 'tap-fancy2.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-fancy2.sh b/t/tap-fancy2.sh
index bb51d54..6ab67c9 100755
--- a/t/tap-fancy2.sh
+++ b/t/tap-fancy2.sh
@@ -17,7 +17,6 @@
# TAP support: more unusual forms for valid TAP input.
# See also related test 'tap-fancy.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-global-log.sh b/t/tap-global-log.sh
index 69dc5b0..29e582c 100755
--- a/t/tap-global-log.sh
+++ b/t/tap-global-log.sh
@@ -17,7 +17,6 @@
# TAP support:
# - which log files get copied in the global log?
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-global-result.sh b/t/tap-global-result.sh
index 78d5c9f..30215c7 100755
--- a/t/tap-global-result.sh
+++ b/t/tap-global-result.sh
@@ -18,7 +18,6 @@
# - which global test result derives from different test results
# mixed in a single script?
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-log.sh b/t/tap-log.sh
index ca564e1..5faf838 100755
--- a/t/tap-log.sh
+++ b/t/tap-log.sh
@@ -22,7 +22,6 @@
# - VERBOSE environment variable support
# Keep in sync with 'test-log.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
cat > Makefile.am << 'END'
diff --git a/t/tap-merge-stdout-stderr.sh b/t/tap-merge-stdout-stderr.sh
index 351b10d..bca96a2 100755
--- a/t/tap-merge-stdout-stderr.sh
+++ b/t/tap-merge-stdout-stderr.sh
@@ -18,7 +18,6 @@
# - The Automake TAP driver has an option that instruct it to read TAP
# input also from the stderr of the test command, not only its stdout.
-am_parallel_tests=yes
. ./defs || Exit 1
fetch_tap_driver
diff --git a/t/tap-missing-plan-and-bad-exit.sh
b/t/tap-missing-plan-and-bad-exit.sh
index e1ea4fd..31a702c 100755
--- a/t/tap-missing-plan-and-bad-exit.sh
+++ b/t/tap-missing-plan-and-bad-exit.sh
@@ -19,7 +19,6 @@
# plan, then the driver reports both "missing plan" and "exited with
# non-zero status" errors.
-am_parallel_tests=yes
. ./defs || Exit 1
cat > foo.test <<END
diff --git a/t/tap-more.sh b/t/tap-more.sh
index d275bd9..7970d7f 100755
--- a/t/tap-more.sh
+++ b/t/tap-more.sh
@@ -24,7 +24,6 @@
# correct test script(s)
# - "make distcheck" works
-am_parallel_tests=yes
. ./defs || Exit 1
fetch_tap_driver
diff --git a/t/tap-more2.sh b/t/tap-more2.sh
index 3cefd58..b34e3c1 100755
--- a/t/tap-more2.sh
+++ b/t/tap-more2.sh
@@ -20,7 +20,6 @@
# - interactions with 'check_*' variables
required='cc native'
-am_parallel_tests=yes
. ./defs || Exit 1
fetch_tap_driver
diff --git a/t/tap-msg0-bailout.sh b/t/tap-msg0-bailout.sh
index 115ffcd..b9ef141 100755
--- a/t/tap-msg0-bailout.sh
+++ b/t/tap-msg0-bailout.sh
@@ -19,7 +19,6 @@
# of a "plan with skip" TAP plan
# generally true!
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-msg0-directive.sh b/t/tap-msg0-directive.sh
index 04d3790..cbd2fce 100755
--- a/t/tap-msg0-directive.sh
+++ b/t/tap-msg0-directive.sh
@@ -17,7 +17,6 @@
# TAP support:
# - literal string "0" as a TODO or SKIP message
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-msg0-misc.sh b/t/tap-msg0-misc.sh
index 6a515a8..06f400b 100755
--- a/t/tap-msg0-misc.sh
+++ b/t/tap-msg0-misc.sh
@@ -18,7 +18,6 @@
# - literal "0" and "0.0" in a test description and a TODO/SKIP message
# at the same time
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-msg0-planskip.sh b/t/tap-msg0-planskip.sh
index 60aa5fe..7f435e9 100755
--- a/t/tap-msg0-planskip.sh
+++ b/t/tap-msg0-planskip.sh
@@ -18,7 +18,6 @@
# - literal strings "0" and "0.0" as the reason of the skip in a "TAP
# plan with skip" (i.e., "1..0 # SKIP ...").
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-msg0-result.sh b/t/tap-msg0-result.sh
index 8c464c4..a2cc0a5 100755
--- a/t/tap-msg0-result.sh
+++ b/t/tap-msg0-result.sh
@@ -17,7 +17,6 @@
# TAP support:
# - the string "0" as a test description
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-negative-numbers.sh b/t/tap-negative-numbers.sh
index 67ecb1e..11661a1 100755
--- a/t/tap-negative-numbers.sh
+++ b/t/tap-negative-numbers.sh
@@ -18,7 +18,6 @@
# - don't spuriously recognize negative TAP result numbers, but correctly
# interpret them as test descriptions instead
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-no-disable-hard-error.sh b/t/tap-no-disable-hard-error.sh
index c95e20e..5fa587d 100755
--- a/t/tap-no-disable-hard-error.sh
+++ b/t/tap-no-disable-hard-error.sh
@@ -18,7 +18,6 @@
# - "Bail out!" magic and TAP parse errors are not disabled nor turned
# into simple failures by the definition DISABLE_HARD_ERRORS.
-am_parallel_tests=yes
. ./defs || Exit 1
cat > Makefile.am << 'END'
diff --git a/t/tap-no-merge-stdout-stderr.sh b/t/tap-no-merge-stdout-stderr.sh
index 0236ef8..eb6b080 100755
--- a/t/tap-no-merge-stdout-stderr.sh
+++ b/t/tap-no-merge-stdout-stderr.sh
@@ -18,7 +18,6 @@
# - By default, TAP input is only from the stdout (and not the stderr)
# of the test command.
-am_parallel_tests=yes
. ./defs || Exit 1
cat > Makefile.am << 'END'
diff --git a/t/tap-no-spurious-numbers.sh b/t/tap-no-spurious-numbers.sh
index 2fc993e..4cdace0 100755
--- a/t/tap-no-spurious-numbers.sh
+++ b/t/tap-no-spurious-numbers.sh
@@ -18,7 +18,6 @@
# - we shouldn't spuriously recognize as TAP result numbers what it
# not, even if it seems pretty close
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-no-spurious-summary.sh b/t/tap-no-spurious-summary.sh
index 8da15e8..a6437d8 100755
--- a/t/tap-no-spurious-summary.sh
+++ b/t/tap-no-spurious-summary.sh
@@ -18,7 +18,6 @@
# - ':test-results:' directives in test scripts' output doesn't
# originate spurious results in the testsuite summary
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-no-spurious.sh b/t/tap-no-spurious.sh
index ac6e668..b9bca21 100755
--- a/t/tap-no-spurious.sh
+++ b/t/tap-no-spurious.sh
@@ -18,7 +18,6 @@
# - don't spuriously recognize lines that are "almost" TAP lines as
# real TAP lines
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-not-ok-skip.sh b/t/tap-not-ok-skip.sh
index 8cfffe2..f52127c 100755
--- a/t/tap-not-ok-skip.sh
+++ b/t/tap-not-ok-skip.sh
@@ -18,7 +18,6 @@
# - a "not ok # SKIP" line should count as a failure, for consistency
# with the prove(1) utility.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-number-wordboundary.sh b/t/tap-number-wordboundary.sh
index 7aa2c7f..324adb6 100755
--- a/t/tap-number-wordboundary.sh
+++ b/t/tap-number-wordboundary.sh
@@ -18,7 +18,6 @@
# - TAP result numbers terminated by a non-whitespace "word boundary"
# character are recognized
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-numbers-leading-zero.sh b/t/tap-numbers-leading-zero.sh
index 345b31f..bbd0d0e 100755
--- a/t/tap-numbers-leading-zero.sh
+++ b/t/tap-numbers-leading-zero.sh
@@ -17,7 +17,6 @@
# TAP support:
# - how does TAP result numbers with leading zero fares?
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-numeric-description.sh b/t/tap-numeric-description.sh
index b2f54f3..cd220a7 100755
--- a/t/tap-numeric-description.sh
+++ b/t/tap-numeric-description.sh
@@ -16,7 +16,6 @@
# TAP result lines whose description is a number.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-out-of-order.sh b/t/tap-out-of-order.sh
index d9f36a2..9e3d755 100755
--- a/t/tap-out-of-order.sh
+++ b/t/tap-out-of-order.sh
@@ -17,7 +17,6 @@
# TAP support:
# - out-of-order test results
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-passthrough-exit.sh b/t/tap-passthrough-exit.sh
index 75ce5f1..6014cc5 100755
--- a/t/tap-passthrough-exit.sh
+++ b/t/tap-passthrough-exit.sh
@@ -19,7 +19,6 @@
# log file
# See also related test 'tap-passthrough.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
cat > Makefile.am << 'END'
diff --git a/t/tap-passthrough.sh b/t/tap-passthrough.sh
index da05b1b..aa9fe53 100755
--- a/t/tap-passthrough.sh
+++ b/t/tap-passthrough.sh
@@ -20,7 +20,6 @@
# - TAP errors are reported in the log file too
# See also related test 'tap-passthrough-exit.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
weirdchars=\''"address@hidden&()[]<>#;,:.^?*/'
diff --git a/t/tap-plan-corner.sh b/t/tap-plan-corner.sh
index 3b9cd1f..601d5b7 100755
--- a/t/tap-plan-corner.sh
+++ b/t/tap-plan-corner.sh
@@ -17,7 +17,6 @@
# TAP support:
# - some corner cases for TAP plan
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-plan-errors.sh b/t/tap-plan-errors.sh
index 1b74059..e0f6272 100755
--- a/t/tap-plan-errors.sh
+++ b/t/tap-plan-errors.sh
@@ -23,7 +23,6 @@
# and 'tap-skip-whole-badcount.test'. More checks about corner-cases
# in TAP plans are performed in 'tap-plan-corner.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-plan-leading-zero.sh b/t/tap-plan-leading-zero.sh
index bb45f31..949c251 100755
--- a/t/tap-plan-leading-zero.sh
+++ b/t/tap-plan-leading-zero.sh
@@ -19,7 +19,6 @@
# - TAP "SKIP" plans with multiple zeroes, as in "1..00 # SKIP"
# This is consistent with the behaviour of the 'prove' utility.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-plan-malformed.sh b/t/tap-plan-malformed.sh
index c8d2cdc..8aca466 100755
--- a/t/tap-plan-malformed.sh
+++ b/t/tap-plan-malformed.sh
@@ -17,7 +17,6 @@
# TAP support: a malformed TAP plan is not recognized. The checks in
# here should be consistent with the behaviour of the 'prove' utility.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-plan-middle.sh b/t/tap-plan-middle.sh
index 0775f10..1c752fc 100755
--- a/t/tap-plan-middle.sh
+++ b/t/tap-plan-middle.sh
@@ -17,7 +17,6 @@
# TAP support:
# - test plan preceding and/or following non-result TAP lines
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-plan-whitespace.sh b/t/tap-plan-whitespace.sh
index 7bdb4dc..a117fe0 100755
--- a/t/tap-plan-whitespace.sh
+++ b/t/tap-plan-whitespace.sh
@@ -17,7 +17,6 @@
# TAP support:
# - plan line with trailing whitespace is recognized and handled correctly
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-plan.sh b/t/tap-plan.sh
index d85a3a2..185658d 100755
--- a/t/tap-plan.sh
+++ b/t/tap-plan.sh
@@ -18,7 +18,6 @@
# - test scripts with the test plan at the beginning
# - test scripts with the test plan at the end
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-planskip-and-logging.sh b/t/tap-planskip-and-logging.sh
index 48b3e12..cd64623 100755
--- a/t/tap-planskip-and-logging.sh
+++ b/t/tap-planskip-and-logging.sh
@@ -18,7 +18,6 @@
# - interactions between "TAP plan with SKIP" and logging of earlier or
# later TAP or non-TAP text
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-planskip-badexit.sh b/t/tap-planskip-badexit.sh
index fbb3b56..58ce0e7 100755
--- a/t/tap-planskip-badexit.sh
+++ b/t/tap-planskip-badexit.sh
@@ -18,7 +18,6 @@
# - an exit status != 0 of a test script causes an hard error, even if
# the last line of output is a "SKIP plan" (e.g., "1..0 # SKIP").
-am_parallel_tests=yes
. ./defs || Exit 1
echo TESTS = one.test two.test > Makefile.am
diff --git a/t/tap-planskip-bailout.sh b/t/tap-planskip-bailout.sh
index 7fb72e9..351aaba 100755
--- a/t/tap-planskip-bailout.sh
+++ b/t/tap-planskip-bailout.sh
@@ -18,7 +18,6 @@
# - a "Bail out!" directive causes an hard error, even if coming after
# a "SKIP plan" (e.g., "1..0 # SKIP").
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-planskip-case-insensitive.sh
b/t/tap-planskip-case-insensitive.sh
index b26701c..9de6bc5 100755
--- a/t/tap-planskip-case-insensitive.sh
+++ b/t/tap-planskip-case-insensitive.sh
@@ -17,7 +17,6 @@
# TAP support:
# - "SKIP" keyword in a TAP plan is case-insensitive
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-planskip-late.sh b/t/tap-planskip-late.sh
index f89a55d..e0d3513 100755
--- a/t/tap-planskip-late.sh
+++ b/t/tap-planskip-late.sh
@@ -18,7 +18,6 @@
# - the special "plan with SKIP" can also be used "late" in the TAP
# stream, i.e., preceded by non-TAP output or TAP diagnostic.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-planskip-later-errors.sh b/t/tap-planskip-later-errors.sh
index a73dbce..7bf3cb1 100755
--- a/t/tap-planskip-later-errors.sh
+++ b/t/tap-planskip-later-errors.sh
@@ -17,7 +17,6 @@
# TAP support:
# - TAP errors following a "TAP plan with SKIP" are still diagnosed.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-planskip-unplanned-corner.sh
b/t/tap-planskip-unplanned-corner.sh
index 6dff7ac..ead8613 100755
--- a/t/tap-planskip-unplanned-corner.sh
+++ b/t/tap-planskip-unplanned-corner.sh
@@ -18,7 +18,6 @@
# - test results seen in a TAP stream that has a "plan with SKIP" are
# flagged as errors, even if all of them are "SKIP" results.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-planskip-unplanned.sh b/t/tap-planskip-unplanned.sh
index 4aeb4de..cfb1c60 100755
--- a/t/tap-planskip-unplanned.sh
+++ b/t/tap-planskip-unplanned.sh
@@ -19,7 +19,6 @@
# been seen is an error
# - any test result following a "plan with skip" is an error.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-planskip-whitespace.sh b/t/tap-planskip-whitespace.sh
index a4dae99..4640ee5 100755
--- a/t/tap-planskip-whitespace.sh
+++ b/t/tap-planskip-whitespace.sh
@@ -18,7 +18,6 @@
# - normalization of whitespace in console testsuite progress associated
# with a SKIP directive in the TAP plan
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-planskip.sh b/t/tap-planskip.sh
index 97ebd0c..142afd7 100755
--- a/t/tap-planskip.sh
+++ b/t/tap-planskip.sh
@@ -17,7 +17,6 @@
# Basic TAP test protocol support:
# - special plan format to skip all the tests in a script
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-realtime.sh b/t/tap-realtime.sh
index 51f7bba..d874b0c 100755
--- a/t/tap-realtime.sh
+++ b/t/tap-realtime.sh
@@ -22,7 +22,6 @@
# children, and is pretty hacky and complex; is there a better way to
# accomplish the checks done here?
-am_parallel_tests=yes
. ./defs || Exit 1
cat >expect-check <<'END'
diff --git a/t/tap-recheck-logs.sh b/t/tap-recheck-logs.sh
index 53b2370..7fb2b80 100755
--- a/t/tap-recheck-logs.sh
+++ b/t/tap-recheck-logs.sh
@@ -17,7 +17,6 @@
# TAP support:
# - RECHECK_LOGS
-am_parallel_tests=yes
. ./defs || Exit 1
cat > Makefile.am << 'END'
diff --git a/t/tap-recheck.sh b/t/tap-recheck.sh
index 4b120a5..98a960e 100755
--- a/t/tap-recheck.sh
+++ b/t/tap-recheck.sh
@@ -17,7 +17,6 @@
# Test the 'recheck' target for TAP test protocol.
# Keep in sync with 'test-driver-custom-multitest-recheck.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
fetch_tap_driver
diff --git a/t/tap-result-comment.sh b/t/tap-result-comment.sh
index 7162df0..21bc810 100755
--- a/t/tap-result-comment.sh
+++ b/t/tap-result-comment.sh
@@ -17,7 +17,6 @@
# TAP support:
# - non-directive comments in TAP results are kept verbatim
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-signal.tap b/t/tap-signal.tap
index cf5c945..e23deea 100755
--- a/t/tap-signal.tap
+++ b/t/tap-signal.tap
@@ -17,7 +17,6 @@
# TAP support:
# - a test script terminated by a signal causes an hard error
-am_parallel_tests=yes
. ./defs || Exit 1
fetch_tap_driver
diff --git a/t/tap-test-number-0.sh b/t/tap-test-number-0.sh
index cf75cef..8faa9c0 100755
--- a/t/tap-test-number-0.sh
+++ b/t/tap-test-number-0.sh
@@ -18,7 +18,6 @@
# - a test result numbered as 0 is to be considered out-of-order
# This is consistent with the behaviour of the 'prove' utility.
-am_parallel_tests=yes
. ./defs || Exit 1
if test $am_tap_implementation = perl; then
diff --git a/t/tap-todo-skip-together.sh b/t/tap-todo-skip-together.sh
index e911532..31580ca 100755
--- a/t/tap-todo-skip-together.sh
+++ b/t/tap-todo-skip-together.sh
@@ -18,7 +18,6 @@
# - TODO and SKIP directives on the same line: the first one wins
# See also related test 'tap-ambiguous-directive.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-todo-skip-whitespace.sh b/t/tap-todo-skip-whitespace.sh
index 9d7afb9..d36aa13 100755
--- a/t/tap-todo-skip-whitespace.sh
+++ b/t/tap-todo-skip-whitespace.sh
@@ -18,7 +18,6 @@
# - normalization of whitespace in console testsuite progress associated
# with TODO and SKIP directives
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-todo-skip.sh b/t/tap-todo-skip.sh
index e261d57..62206ab 100755
--- a/t/tap-todo-skip.sh
+++ b/t/tap-todo-skip.sh
@@ -23,7 +23,6 @@
# - the reasons for TODO and SKIP, if present, are nicely printed in
# the testsuite progress output
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-unplanned.sh b/t/tap-unplanned.sh
index 252e946..e8d9dad 100755
--- a/t/tap-unplanned.sh
+++ b/t/tap-unplanned.sh
@@ -17,7 +17,6 @@
# TAP support:
# - unplanned tests are properly reported as errors
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-whitespace-normalization.sh
b/t/tap-whitespace-normalization.sh
index 2274674..a43d29a 100755
--- a/t/tap-whitespace-normalization.sh
+++ b/t/tap-whitespace-normalization.sh
@@ -20,7 +20,6 @@
# force us to tweak dozens of other tests (hopefully).
# See also related test 'tap-todo-skip-whitespace.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
cat > Makefile.am << 'END'
diff --git a/t/tap-with-and-without-number.sh b/t/tap-with-and-without-number.sh
index fc795f6..82889c2 100755
--- a/t/tap-with-and-without-number.sh
+++ b/t/tap-with-and-without-number.sh
@@ -19,7 +19,6 @@
# - tests without explicit number get automatically numbered in the
# testsuite progress output on console
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/tap-xfail-tests.sh b/t/tap-xfail-tests.sh
index 6107792..27c1804 100755
--- a/t/tap-xfail-tests.sh
+++ b/t/tap-xfail-tests.sh
@@ -17,7 +17,6 @@
# TAP and $(XFAIL_TESTS): test results without directives are turned from
# PASS to XPASS and from FAIL to XFAIL; other results are unchanged.
-am_parallel_tests=yes
. ./defs || Exit 1
. "$am_testauxdir"/tap-setup.sh || fatal_ "sourcing tap-setup.sh"
diff --git a/t/test-driver-acsubst.sh b/t/test-driver-acsubst.sh
index 7df66ae..e384ac7 100755
--- a/t/test-driver-acsubst.sh
+++ b/t/test-driver-acsubst.sh
@@ -17,7 +17,6 @@
# parallel-tests:
# - LOG_DRIVER variables can be AC_SUBST'd
-am_parallel_tests=yes
. ./defs || Exit 1
mkdir test-drivers
diff --git a/t/test-driver-cond.sh b/t/test-driver-cond.sh
index ac0b3f1..5538105 100755
--- a/t/test-driver-cond.sh
+++ b/t/test-driver-cond.sh
@@ -18,7 +18,6 @@
# - Automake can correctly handle conditionals contents for the
# LOG_DRIVER variables.
-am_parallel_tests=yes
. ./defs || Exit 1
cp "$am_testauxdir"/trivial-test-driver . \
diff --git a/t/test-driver-create-log-dir.sh b/t/test-driver-create-log-dir.sh
index bfca0b9..dc8e681 100755
--- a/t/test-driver-create-log-dir.sh
+++ b/t/test-driver-create-log-dir.sh
@@ -18,7 +18,6 @@
# e.g., 'sub/foo.log'), the Automake test harness must ensure that
# directory exists before calling any custom test driver.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/test-driver-custom-multitest-recheck.sh
b/t/test-driver-custom-multitest-recheck.sh
index 9b4f5df..a42e0d0 100755
--- a/t/test-driver-custom-multitest-recheck.sh
+++ b/t/test-driver-custom-multitest-recheck.sh
@@ -22,7 +22,6 @@
# and 'parallel-tests-recheck-override.test'.
# Keep in sync with 'tap-recheck.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
cp "$am_testauxdir"/trivial-test-driver . \
diff --git a/t/test-driver-custom-multitest-recheck2.sh
b/t/test-driver-custom-multitest-recheck2.sh
index 3e7add6..5ceb339 100755
--- a/t/test-driver-custom-multitest-recheck2.sh
+++ b/t/test-driver-custom-multitest-recheck2.sh
@@ -21,7 +21,6 @@
# See also related tests 'test-driver-custom-multitest-recheck.test' and
# 'parallel-tests-recheck-override.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
cp "$am_testauxdir"/trivial-test-driver . \
diff --git a/t/test-driver-custom-multitest.sh
b/t/test-driver-custom-multitest.sh
index c7959cd..c660ec2 100755
--- a/t/test-driver-custom-multitest.sh
+++ b/t/test-driver-custom-multitest.sh
@@ -19,7 +19,6 @@
# only checks implementation details in Automake's custom test drivers
# support, but also serves as a "usability test" for our APIs.
-am_parallel_tests=yes
. ./defs || Exit 1
cp "$am_testauxdir"/trivial-test-driver . \
diff --git a/t/test-driver-custom-no-extra-driver.sh
b/t/test-driver-custom-no-extra-driver.sh
index 31000af..4d7367d 100755
--- a/t/test-driver-custom-no-extra-driver.sh
+++ b/t/test-driver-custom-no-extra-driver.sh
@@ -18,7 +18,6 @@
# installed or referenced if it's not used, i.e., if the user has
# defined his own '*LOG_DRIVER' variables.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac <<'END'
diff --git a/t/test-driver-custom-xfail-tests.sh
b/t/test-driver-custom-xfail-tests.sh
index 9a4e3fe..14568c0 100755
--- a/t/test-driver-custom-xfail-tests.sh
+++ b/t/test-driver-custom-xfail-tests.sh
@@ -16,7 +16,6 @@
# Custom test drivers: "abstract" XFAIL_TESTS support.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac <<'END'
diff --git a/t/test-driver-custom.sh b/t/test-driver-custom.sh
index 60ce074..ce4a7fc 100755
--- a/t/test-driver-custom.sh
+++ b/t/test-driver-custom.sh
@@ -16,7 +16,6 @@
# Custom test drivers: per-extension test drivers.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/test-driver-fail.sh b/t/test-driver-fail.sh
index 0eb2268..75f6a87 100755
--- a/t/test-driver-fail.sh
+++ b/t/test-driver-fail.sh
@@ -22,7 +22,6 @@
# (like our dummy one in this test) might leave around a test log even
# in case of internal failures.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac <<'END'
diff --git a/t/test-driver-is-distributed.sh b/t/test-driver-is-distributed.sh
index fb4e540..9b2f08b 100755
--- a/t/test-driver-is-distributed.sh
+++ b/t/test-driver-is-distributed.sh
@@ -19,7 +19,6 @@
# defined in a subdir Makefile
am_create_testdir=empty
-am_parallel_tests=yes
. ./defs || Exit 1
ocwd=`pwd` || fatal_ "getting current working directory"
diff --git a/t/test-driver-strip-vpath.sh b/t/test-driver-strip-vpath.sh
index 9670188..0f51c3e 100755
--- a/t/test-driver-strip-vpath.sh
+++ b/t/test-driver-strip-vpath.sh
@@ -17,7 +17,6 @@
# Custom test drivers: check that the test name passed to the test
# driver has any VPATH prefix stripped.
-am_parallel_tests=yes
. ./defs || Exit 1
ocwd=`pwd` || fatal_ "cannot get current working directory"
diff --git a/t/test-driver-trs-suffix-registered.sh
b/t/test-driver-trs-suffix-registered.sh
index 0c3734f..801300b 100755
--- a/t/test-driver-trs-suffix-registered.sh
+++ b/t/test-driver-trs-suffix-registered.sh
@@ -20,7 +20,6 @@
# - .test if $(TEST_EXTENSIONS) is not defined
# - stuff in $(TEST_EXTENSIONS) otherwise
-am_parallel_tests=yes
. ./defs || Exit 1
: > Makefile.am
diff --git a/t/test-extensions-cond.sh b/t/test-extensions-cond.sh
index 8180803..e081d79 100755
--- a/t/test-extensions-cond.sh
+++ b/t/test-extensions-cond.sh
@@ -16,7 +16,6 @@
# Expose bug in conditional definition of TEST_EXTENSIONS.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/test-extensions.sh b/t/test-extensions.sh
index d2fc2dd..fa23481 100755
--- a/t/test-extensions.sh
+++ b/t/test-extensions.sh
@@ -18,7 +18,6 @@
# and do not diagnose valid (albeit more unusual) ones.
# See automake bug#9400.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac <<'END'
diff --git a/t/test-harness-vpath-rewrite.sh b/t/test-harness-vpath-rewrite.sh
index f0f71c6..0058b6d 100755
--- a/t/test-harness-vpath-rewrite.sh
+++ b/t/test-harness-vpath-rewrite.sh
@@ -17,7 +17,6 @@
# Check that our concurrent test harness is not subject to spurious VPATH
# rewrites.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/test-log.sh b/t/test-log.sh
index d400b52..0e6065d 100755
--- a/t/test-log.sh
+++ b/t/test-log.sh
@@ -22,7 +22,6 @@
# - VERBOSE environment variable support
# Keep in sync with 'tap-log.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac <<END
diff --git a/t/test-logs-repeated.sh b/t/test-logs-repeated.sh
index d75bbcb..30aefca 100755
--- a/t/test-logs-repeated.sh
+++ b/t/test-logs-repeated.sh
@@ -20,7 +20,6 @@
# different test scripts don't end up sharing the same log file.
# (Automake itself is such a project, BTW ;-)
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac <<END
diff --git a/t/test-metadata-global-log.sh b/t/test-metadata-global-log.sh
index b10f481..af435ae 100755
--- a/t/test-metadata-global-log.sh
+++ b/t/test-metadata-global-log.sh
@@ -20,7 +20,6 @@
# with the use of the reStructuredText field ':copy-in-global-log:' in
# the associated '.trs' files.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/test-metadata-global-result.sh b/t/test-metadata-global-result.sh
index b247444..4aa633f 100755
--- a/t/test-metadata-global-result.sh
+++ b/t/test-metadata-global-result.sh
@@ -18,7 +18,6 @@
# "global test result" in '*.trs' files, as documented in the automake
# manual.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/test-metadata-recheck.sh b/t/test-metadata-recheck.sh
index 0a7a7cc..8874745 100755
--- a/t/test-metadata-recheck.sh
+++ b/t/test-metadata-recheck.sh
@@ -17,7 +17,6 @@
# Test the "make recheck" semantics for custom test drivers, as documented
# in the Automake manual.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/test-metadata-results.sh b/t/test-metadata-results.sh
index 5978f7f..03f93d7 100755
--- a/t/test-metadata-results.sh
+++ b/t/test-metadata-results.sh
@@ -17,7 +17,6 @@
# Parallel testsuite harness: check APIs for the registering of test
# results in '*.trs' files, as documented in the automake manual.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/test-missing.sh b/t/test-missing.sh
index 586190f..2491da5 100755
--- a/t/test-missing.sh
+++ b/t/test-missing.sh
@@ -18,7 +18,6 @@
# - non-existent scripts listed in TESTS get diagnosed
# See also related test 'test-missing2.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/test-missing2.sh b/t/test-missing2.sh
index e511a8b..6dd4b9d 100755
--- a/t/test-missing2.sh
+++ b/t/test-missing2.sh
@@ -19,7 +19,6 @@
# all the $(TEST_LOGS) have a dummy dependency.
# See also related test 'test-missing.test'.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/test-trs-basic.sh b/t/test-trs-basic.sh
index a82d260..42456b4 100755
--- a/t/test-trs-basic.sh
+++ b/t/test-trs-basic.sh
@@ -18,7 +18,6 @@
# - creation and removal of '.trs' auxiliary files
# - check some internals regarding the use of '.trs' files.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac <<END
diff --git a/t/test-trs-recover.sh b/t/test-trs-recover.sh
index 3632f61..a132194 100755
--- a/t/test-trs-recover.sh
+++ b/t/test-trs-recover.sh
@@ -19,7 +19,6 @@
# This test is complex and tricky, but that's acceptable since we are
# testing semantics that are potentially complex and tricky.
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac <<END
diff --git a/t/test-trs-recover2.sh b/t/test-trs-recover2.sh
index a154ce7..3cbbbf6 100755
--- a/t/test-trs-recover2.sh
+++ b/t/test-trs-recover2.sh
@@ -17,7 +17,6 @@
# Check parallel harness features:
# - recovery from unreadable '.trs' files, in various scenarios
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac <<END
diff --git a/t/tests-environment-and-log-compiler.sh
b/t/tests-environment-and-log-compiler.sh
index 0e9d6e7..65855ce 100755
--- a/t/tests-environment-and-log-compiler.sh
+++ b/t/tests-environment-and-log-compiler.sh
@@ -18,7 +18,6 @@
# by TESTS_ENVIRONMENT and AM_TESTS_ENVIRONMENT in LOG_COMPILER and
# LOG_FLAGS (for tests both with and without registered extensions).
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/tests-environment-backcompat.sh
b/t/tests-environment-backcompat.sh
index 61b2728..93643d1 100755
--- a/t/tests-environment-backcompat.sh
+++ b/t/tests-environment-backcompat.sh
@@ -19,7 +19,7 @@
# be run by (with the parallel-tests driver one should use LOG_COMPILER
# for this). The behaviour tested here is also documented in the manual.
-am_parallel_tests=no
+am_serial_tests=yes
. ./defs || Exit 1
cat >> configure.ac <<END
diff --git a/t/tests-environment-fd-redirect.sh
b/t/tests-environment-fd-redirect.sh
index d62e537..6c42fd4 100755
--- a/t/tests-environment-fd-redirect.sh
+++ b/t/tests-environment-fd-redirect.sh
@@ -26,7 +26,6 @@
# and the following CC:ed thread on bug-autoconf list:
# <http://lists.gnu.org/archive/html/bug-autoconf/2011-06/msg00002.html>
-am_parallel_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/tests-environment.sh b/t/tests-environment.sh
index 27cd458..62ca4ee 100755
--- a/t/tests-environment.sh
+++ b/t/tests-environment.sh
@@ -16,6 +16,7 @@
# "Simple Tests" testsuite driver: check TESTS_ENVIRONMENT support.
+am_serial_tests=yes
. ./defs || Exit 1
cat >> configure.ac << 'END'
diff --git a/t/testsuite-recheck-speed.sh b/t/testsuite-recheck-speed.sh
index 9b37262..50cc03b 100755
--- a/t/testsuite-recheck-speed.sh
+++ b/t/testsuite-recheck-speed.sh
@@ -19,7 +19,6 @@
# FIXME: performance is too low, and FAIL accordingly; it just offers an
# FIXME: easy way to verify how effective a performance optimization is.
-am_parallel_tests=yes
. ./defs || Exit 1
count=5000
diff --git a/t/testsuite-summary-count-many.sh
b/t/testsuite-summary-count-many.sh
index ff38097..b101206 100755
--- a/t/testsuite-summary-count-many.sh
+++ b/t/testsuite-summary-count-many.sh
@@ -19,7 +19,6 @@
# Incidentally, this test also checks that the testsuite summary doesn't
# give any bug-report address if it's not defined.
-am_parallel_tests=yes
. ./defs || Exit 1
for s in trivial-test-driver extract-testsuite-summary.pl; do
diff --git a/t/testsuite-summary-reference-log.sh
b/t/testsuite-summary-reference-log.sh
index 480ec12..1958dd4 100755
--- a/t/testsuite-summary-reference-log.sh
+++ b/t/testsuite-summary-reference-log.sh
@@ -17,7 +17,6 @@
# Check that the global testsuite log file referenced in the testsuite
# summary and in the global testsuite log itself is correct.
-am_parallel_tests=yes
. ./defs || Exit 1
mv configure.ac configure.stub
diff --git a/t/testsuite-summary-speed.sh b/t/testsuite-summary-speed.sh
index 4d18c61..a11bb8e 100755
--- a/t/testsuite-summary-speed.sh
+++ b/t/testsuite-summary-speed.sh
@@ -20,7 +20,6 @@
# FIXME: performance is too low, and FAIL accordingly; it just offers
# FIXME: an easy way verify how effective a performance optimization is.
-am_parallel_tests=yes
. ./defs || Exit 1
count=10000
hooks/post-receive
--
GNU Automake
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Automake-commit] [SCM] GNU Automake branch, maint, updated. v1.12-80-g7b142a7,
Stefano Lattarini <=