[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[FYI] {micro} tests: avoid '$MAKE' redirections, use 'run_make' instead
From: |
Stefano Lattarini |
Subject: |
[FYI] {micro} tests: avoid '$MAKE' redirections, use 'run_make' instead |
Date: |
Thu, 23 May 2013 20:42:37 +0200 |
The use 'run_make' with the -E, -O and -M option, it is more
idiomatic now. Also, this way, centralized fixes and improvements
done in 'run_make' will automatically propagate through most of
the testsuite.
* syntax-checks.mk (sc_tests_no_run_make_redirect): Also check against
'$MAKE' invocations that uses output redirections (and not only against
'run_make' invocation that do so).
* Several tests: Adjust (and few minor cosmetic changes as well, while
at it).
Signed-off-by: Stefano Lattarini <address@hidden>
---
syntax-checks.mk | 8 +++++---
t/aclocal-amflags.sh | 3 +--
t/aclocal-autoconf-version-check.sh | 3 +--
t/alpha.sh | 5 +++--
t/autohdr-subdir-pr12495.sh | 3 +--
t/ax/depcomp.sh | 3 +--
t/built-sources-check.sh | 3 +--
t/built-sources-fork-bomb.sh | 7 ++-----
t/ccnoco3.sh | 3 +--
t/check-fd-redirect.sh | 5 +----
t/check-tests-in-builddir.sh | 29 +++++++++++++----------------
t/check10.sh | 2 +-
t/check2.sh | 3 +--
t/check4.sh | 12 ++++--------
t/check8.sh | 8 ++------
t/colon6.sh | 3 +--
t/color-tests2.sh | 27 ++++++++++++---------------
t/cond34.sh | 12 ++++--------
t/cond37.sh | 12 ++++--------
t/cond39.sh | 6 ++----
t/conff.sh | 18 ++++++------------
t/conffile-leading-dot.sh | 3 +--
t/cscope.tap | 3 +--
t/dejagnu3.sh | 5 ++---
t/deleted-am.sh | 6 ++----
t/deleted-m4.sh | 6 ++----
t/dist-missing-am.sh | 3 +--
t/dist-missing-included-m4.sh | 3 +--
t/dist-missing-m4.sh | 3 +--
t/distcheck-configure-flags-am.sh | 3 +--
t/distcheck-configure-flags-subpkg.sh | 3 +--
t/distcheck-configure-flags.sh | 3 +--
t/distcheck-missing-m4.sh | 6 ++----
t/distcheck-outdated-m4.sh | 7 ++-----
t/distcheck-pr10470.sh | 3 +--
t/distcheck-pr9579.sh | 8 ++------
t/distcleancheck.sh | 4 +---
t/distlinksbrk.sh | 5 ++---
t/extra-deps-lt.sh | 3 +--
t/extra-deps.sh | 3 +--
t/fn99.sh | 3 +--
t/fn99subdir.sh | 3 +--
t/gnits2.sh | 5 +++--
t/gnits3.sh | 5 +++--
t/install-info-dir.sh | 3 +--
t/libtool7.sh | 20 +++++---------------
t/lisp7.sh | 4 +---
t/lisp8.sh | 7 +++++--
t/ltorder.sh | 3 +--
t/make-is-gnu.sh | 3 +--
t/maken3.sh | 3 +--
t/output7.sh | 9 ++++-----
t/parallel-tests-basics.sh | 3 +--
t/parallel-tests-concurrency.sh | 5 +++++
t/parallel-tests-console-output.sh | 3 +--
t/parallel-tests-dry-run-2.sh | 3 +--
t/parallel-tests-empty.sh | 6 +++---
t/parallel-tests-extra-programs.sh | 7 ++-----
t/parallel-tests-fd-redirect-exeext.sh | 6 ++----
t/parallel-tests-fd-redirect.sh | 5 ++---
t/parallel-tests-log-override-recheck.sh | 3 +--
t/parallel-tests-no-spurious-summary.sh | 6 ++----
t/parallel-tests-recheck-depends-on-all.sh | 9 +++------
t/parallel-tests-recheck-pr11791.sh | 22 ++++++++--------------
t/parallel-tests-recheck.sh | 6 ++----
t/parallel-tests-reset-term.sh | 8 ++------
t/pluseq10.sh | 3 +--
t/posixsubst-tests.sh | 11 +++++------
t/pr300-ltlib.sh | 6 ++----
t/remake-aclocal-version-mismatch.sh | 6 ++----
t/remake-subdir3.sh | 3 +--
t/self-check-shell-no-trail-bslash.sh | 3 +--
t/silent-c.sh | 6 ++----
t/silent-custom.sh | 3 +--
t/silent-cxx.sh | 8 ++++----
t/silent-f77.sh | 6 ++----
t/silent-f90.sh | 6 ++----
t/silent-gen.sh | 18 ++++++------------
t/silent-lex.sh | 12 ++++--------
t/silent-lt.sh | 6 ++----
t/silent-many-languages.sh | 6 ++----
t/silent-nested-vars.sh | 6 ++----
t/silent-texi.sh | 9 ++-------
t/silent-yacc-headers.sh | 24 ++++++++----------------
t/silent-yacc.sh | 12 ++++--------
t/subobj9.sh | 6 ++----
t/tap-ambiguous-directive.sh | 4 +---
t/tap-bad-prog.tap | 9 ++-------
t/tap-bailout-suppress-badexit.sh | 5 ++---
t/tap-bailout-suppress-later-diagnostic.sh | 6 +-----
t/tap-basic.sh | 4 +---
t/tap-deps.sh | 4 +---
t/tap-diagnostic-custom.sh | 6 ++----
t/tap-diagnostic.sh | 12 ++++--------
t/tap-doc.sh | 3 +--
t/tap-doc2.sh | 3 +--
t/tap-empty-diagnostic.sh | 3 +--
t/tap-empty.sh | 3 +--
t/tap-escape-directive-2.sh | 4 +---
t/tap-escape-directive.sh | 4 +---
t/tap-exit.sh | 6 ++----
t/tap-fancy.sh | 13 ++++---------
t/tap-fancy2.sh | 3 +--
t/tap-log.sh | 3 +--
t/tap-merge-stdout-stderr.sh | 11 +++--------
t/tap-missing-plan-and-bad-exit.sh | 3 +--
t/tap-more2.sh | 3 +--
t/tap-msg0-directive.sh | 4 +---
t/tap-msg0-misc.sh | 4 +---
t/tap-msg0-result.sh | 4 +---
t/tap-negative-numbers.sh | 4 +---
t/tap-no-disable-hard-error.sh | 4 +---
t/tap-no-merge-stdout-stderr.sh | 5 ++---
t/tap-no-spurious-numbers.sh | 4 +---
t/tap-no-spurious-summary.sh | 4 +---
t/tap-no-spurious.sh | 4 +---
t/tap-not-ok-skip.sh | 4 +---
t/tap-number-wordboundary.sh | 12 +++---------
t/tap-numbers-leading-zero.sh | 3 +--
t/tap-numeric-description.sh | 4 +---
t/tap-plan-errors.sh | 3 +--
t/tap-planskip-badexit.sh | 3 +--
t/tap-planskip-bailout.sh | 3 +--
t/tap-planskip-later-errors.sh | 4 +---
t/tap-planskip-unplanned.sh | 12 ++++--------
t/tap-recheck.sh | 11 +++++------
t/tap-result-comment.sh | 4 +---
t/tap-signal.tap | 8 +++-----
t/tap-todo-skip-together.sh | 4 +---
t/tap-todo-skip-whitespace.sh | 4 ++--
t/tap-todo-skip.sh | 8 ++------
t/tap-unplanned.sh | 12 ++++--------
t/tap-whitespace-normalization.sh | 7 +++----
t/tap-with-and-without-number.sh | 3 +--
t/test-driver-acsubst.sh | 5 ++---
t/test-driver-custom-multitest-recheck.sh | 11 +++++------
t/test-driver-custom-multitest.sh | 3 +--
t/test-driver-custom-xfail-tests.sh | 6 ++----
t/test-log.sh | 3 +--
t/test-metadata-results.sh | 20 +++++++++++---------
t/test-missing.sh | 6 ++----
t/test-missing2.sh | 3 +--
t/test-trs-recover.sh | 11 ++++-------
t/test-trs-recover2.sh | 6 ++----
t/testsuite-summary-count-many.sh | 2 +-
t/testsuite-summary-reference-log.sh | 9 +++------
146 files changed, 324 insertions(+), 594 deletions(-)
diff --git a/syntax-checks.mk b/syntax-checks.mk
index 6fb1197..99e88f6 100644
--- a/syntax-checks.mk
+++ b/syntax-checks.mk
@@ -342,9 +342,11 @@ sc_tests_no_source_defs:
## Invocation of 'run_make' should not have output redirections.
sc_tests_no_run_make_redirect:
- @if grep -Pzo '.*\brun_make\b(.*(\\\n))*.*>.*' $(xtests); then \
- echo 'Do not redirect "run_make" invocations, use' \
- '"run_make {-E|-O|-M}" instead.' 1>&2; \
+ @if grep -Pzo '.*(\$$MAKE|\brun_make)\b(.*(\\\n))*.*>.*' $(xtests); \
+ then \
+ echo 'Do not redirect stdout/stderr in "run_make" or "$$MAKE"' \
+ 'invocations,' >&2; \
+ echo 'use "run_make {-E|-O|-M}" instead.' >&2; \
exit 1; \
fi
diff --git a/t/aclocal-amflags.sh b/t/aclocal-amflags.sh
index c712d96..c0903b4 100644
--- a/t/aclocal-amflags.sh
+++ b/t/aclocal-amflags.sh
@@ -57,8 +57,7 @@ $sleep
sed 's/MACRO_FOO/MACRO_BAR/' configure.ac > t
mv -f t configure.ac
-$MAKE Makefile >output 2>&1 || { cat output; exit 1; }
-cat output
+run_make -M Makefile
grep "^aclocal.*:.*found macro.*MACRO_BAR.*m4_2/bar\.m4" output
grep "macro.*MACRO_FOO" output && exit 1
test ! -r foo
diff --git a/t/aclocal-autoconf-version-check.sh
b/t/aclocal-autoconf-version-check.sh
index 29aee30..64910d0 100644
--- a/t/aclocal-autoconf-version-check.sh
+++ b/t/aclocal-autoconf-version-check.sh
@@ -43,8 +43,7 @@ sed 's/^dnl!! //' < configure.ac > configure.tmp
cmp configure.ac configure.tmp && fatal_ 'failed to edit configure.ac'
mv -f configure.tmp configure.ac
-$MAKE 2>stderr || { cat stderr >&2; exit 1; }
-cat stderr >&2
+run_make -E
grep 'You have another version of autoconf' stderr
grep 'aclocal.m4:.*this file was generated for autoconf 9999a' stderr
diff --git a/t/alpha.sh b/t/alpha.sh
index 5f01629..bbcc14b 100644
--- a/t/alpha.sh
+++ b/t/alpha.sh
@@ -60,11 +60,12 @@ $AUTOMAKE
./configure
# "make distdir" should fail because NEWS does not mention 1.0a
-$MAKE check 2>stderr && { cat stderr >&2; exit 1; }
-cat stderr >&2
+run_make -E -e FAIL check
grep 'NEWS not updated' stderr
test ! -e works
echo 'alpha 1.0a released' > NEWS
$MAKE check
test -f works
+
+:
diff --git a/t/autohdr-subdir-pr12495.sh b/t/autohdr-subdir-pr12495.sh
index a7a6a6b..7e26b46 100644
--- a/t/autohdr-subdir-pr12495.sh
+++ b/t/autohdr-subdir-pr12495.sh
@@ -67,8 +67,7 @@ ocwd=$(pwd)
for x in b c; do
test $x = b || cd sub
rm -f $x.h.in
- $MAKE $x.h.in 2>stderr && { cat stderr >&2; exit 1; }
- cat stderr >&2
+ run_make -E -e FAIL $x.h.in
test ! -f $x.h.in
if using_gmake; then
grep "No rule to make target [\`\"']$x\.h\.in[\`\"']" stderr
diff --git a/t/ax/depcomp.sh b/t/ax/depcomp.sh
index cdeaae5..ff0ecb6 100644
--- a/t/ax/depcomp.sh
+++ b/t/ax/depcomp.sh
@@ -161,8 +161,7 @@ case $depcomp_with_libtool in
echo lib_LTLIBRARIES = libfoo.la >> Makefile.am
make_ok ()
{
- $MAKE ${1+"$@"} >output 2>&1 || { cat output; return 1; }
- cat output
+ run_make -M -- ${1+"$@"}
$FGREP 'unknown directive' output && return 1
rm -f output
# Checks for stray files possibly left around by less common
diff --git a/t/built-sources-check.sh b/t/built-sources-check.sh
index e528b70..9c81b0e 100644
--- a/t/built-sources-check.sh
+++ b/t/built-sources-check.sh
@@ -58,8 +58,7 @@ $AUTOCONF
$AUTOMAKE -a
./configure --prefix "$(pwd)/inst"
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
grep '^PASS: subrun\.sh *$' stdout
grep 'PASS.*echo\.sh' stdout && exit 1
diff --git a/t/built-sources-fork-bomb.sh b/t/built-sources-fork-bomb.sh
index 72dafa3..4807d35 100644
--- a/t/built-sources-fork-bomb.sh
+++ b/t/built-sources-fork-bomb.sh
@@ -55,15 +55,12 @@ $AUTOCONF
./configure
-$MAKE -n foo >output 2>&1 || { cat output; exit 1; }
-cat output
+run_make -M -- -n foo
test ! -f foo
# Guard against possible infinite recursion.
$FGREP '::OOPS::' output && exit 1
-$MAKE foo >output 2>&1 || { cat output; exit 1; }
-cat output
-$MAKE foo
+run_make -M -- foo
# Guard against possible infinite recursion.
$FGREP '::OOPS::' output && exit 1
diff --git a/t/ccnoco3.sh b/t/ccnoco3.sh
index 7ad5b3b..8e3547b 100644
--- a/t/ccnoco3.sh
+++ b/t/ccnoco3.sh
@@ -71,8 +71,7 @@ mkdir build
cd build
../configure
-$MAKE 2>stderr || { cat stderr >&2; exit 1; }
-cat stderr >&2
+run_make -E
grep 'mv.*the same file' stderr && exit 1
:
diff --git a/t/check-fd-redirect.sh b/t/check-fd-redirect.sh
index 661c59a..80f7867 100644
--- a/t/check-fd-redirect.sh
+++ b/t/check-fd-redirect.sh
@@ -46,10 +46,7 @@ do_check ()
cat foo.test # For debugging.
echo 'this line will be removed' > four
echo 'this line will not be removed' > five
- st=0
- echo 'ok ok ok' | $MAKE check >stdout 2>stderr || st=1
- cat stdout
- cat stderr >&2
+ st=0; echo 'ok ok ok' | run_make -O -E -e IGNORE check || st=$?
cat four
test x"$am_serial_tests" = x"yes" || cat foo.log
test $st -eq 0
diff --git a/t/check-tests-in-builddir.sh b/t/check-tests-in-builddir.sh
index 1c41368..2d71f70 100644
--- a/t/check-tests-in-builddir.sh
+++ b/t/check-tests-in-builddir.sh
@@ -52,41 +52,38 @@ exit 0
END
chmod a+x bar.test
-$MAKE check >out 2>&1 || { cat out; exit 1; }
-cat out
+run_make -M check
# The serial test driver does not strip VPATH components from
# the name of the test, but the parallel driver should.
if test x"$am_serial_tests" = x"yes"; then
- grep '^PASS: .*foo\.test *$' out
+ grep '^PASS: .*foo\.test *$' output
else
- grep '\.\./foo' out && exit 1
- grep '^PASS: foo\.test *$' out
+ grep '\.\./foo' output && exit 1
+ grep '^PASS: foo\.test *$' output
fi
-grep '^PASS: bar\.test *$' out
+grep '^PASS: bar\.test *$' output
rm -f test-suite.log foo.log bar.log
-FOO_EXIT_STATUS=1 $MAKE check >out 2>&1 && { cat out; exit 1; }
-cat out
+run_make -M -e FAIL FOO_EXIT_STATUS=1 check
# The serial test driver does not strip VPATH components from
# the name of the test, but the parallel driver should.
if test x"$am_serial_tests" = x"yes"; then
- grep '^FAIL: .*foo\.test *$' out
+ grep '^FAIL: .*foo\.test *$' output
else
- grep '\.\./foo' out && exit 1
- grep '^FAIL: foo\.test *$' out
+ grep '\.\./foo' output && exit 1
+ grep '^FAIL: foo\.test *$' output
fi
-grep '^PASS: bar\.test *$' out
+grep '^PASS: bar\.test *$' output
rm -f test-suite.log foo.log bar.log
# Check that if the same test is present in srcdir and builddir,
# the one in builddir is preferred.
cp bar.test foo.test
-FOO_EXIT_STATUS=1 $MAKE check >out 2>&1 || { cat out; exit 1; }
-cat out
-grep '^PASS: foo\.test *$' out
-grep '^PASS: bar\.test *$' out
+run_make -M FOO_EXIT_STATUS=1 check
+grep '^PASS: foo\.test *$' output
+grep '^PASS: bar\.test *$' output
# The tests in the builddir must be preferred also by "make dist".
FOO_EXIT_STATUS=1 $MAKE distcheck
diff --git a/t/check10.sh b/t/check10.sh
index 3bb180b..75de991 100644
--- a/t/check10.sh
+++ b/t/check10.sh
@@ -55,7 +55,7 @@ $AUTOCONF
$AUTOMAKE -a
./configure
-(
+(
run_make -e IGNORE TESTS=pass check
run_make -e IGNORE TESTS=fail check
run_make -e IGNORE TESTS=skip check
diff --git a/t/check2.sh b/t/check2.sh
index 03fa8b9..835fff6 100644
--- a/t/check2.sh
+++ b/t/check2.sh
@@ -51,8 +51,7 @@ $AUTOCONF
$AUTOMAKE
./configure
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
grep '^PASS: subrun\.sh *$' stdout
grep 'PASS.*echo\.sh' stdout && exit 1
diff --git a/t/check4.sh b/t/check4.sh
index dc34a38..42a7b0c 100644
--- a/t/check4.sh
+++ b/t/check4.sh
@@ -51,21 +51,18 @@ $AUTOMAKE --add-missing
./configure --prefix "$(pwd)/inst"
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL -- check
grep '^FAIL: fail\.sh *$' stdout
grep '^PASS: ok\.sh *$' stdout && exit 1
# The exit status of 'make -k' can be anything
# (depending on the Make implementation)
-$MAKE -k check >stdout || :
-cat stdout
+run_make -O -e IGNORE -- -k check
grep '^FAIL: fail\.sh *$' stdout
grep '^PASS: ok\.sh *$' stdout
# Should also works when -k is not in first position.
-$MAKE -s -k check >stdout || :
-cat stdout
+run_make -O -e IGNORE -- -s -k check
grep '^FAIL: fail\.sh *' stdout
grep '^PASS: ok\.sh *' stdout
@@ -75,8 +72,7 @@ if using_gmake; then
# Try with a long-option that do not have a short option equivalent
# (here, --no-print-directory). That should cause all options to
# appear verbatim in MAKEFLAGS.
- $MAKE --no-print-directory -k check >stdout || :
- cat stdout
+ run_make -e FAIL -O -- --no-print-directory -k check
grep '^FAIL: fail\.sh *$' stdout
grep '^PASS: ok\.sh *$' stdout
fi
diff --git a/t/check8.sh b/t/check8.sh
index a486147..2586c0b 100644
--- a/t/check8.sh
+++ b/t/check8.sh
@@ -65,10 +65,7 @@ $AUTOCONF
$AUTOMAKE -a
./configure
-AM_COLOR_TESTS=always $MAKE check >stdout 2>stderr &&
- { cat stdout; cat stderr >&2; exit 1; }
-cat stdout
-cat stderr >&2
+run_make -E -O -e FAIL check
grep 'XPASS.* foo$' stdout
grep '^[^X]*PASS.* sub/foo$' stdout
grep '^[^X]*PASS.* bar' stdout
@@ -85,8 +82,7 @@ $MAKE distclean
mkdir build
cd build
../configure
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
# Note: we are not grepping for the space in the lines from the 'foo'
# tests, due to the Solaris make VPATH rewriting (if we fix that, we
# can still write a separate test for it).
diff --git a/t/colon6.sh b/t/colon6.sh
index bad9fad..fe34584 100644
--- a/t/colon6.sh
+++ b/t/colon6.sh
@@ -87,8 +87,7 @@ for vpath in : false; do
# version.good should depend on version.gin.
rm -f version.good
- $MAKE version.good >output 2>&1 && { cat output; exit 1; }
- cat output
+ run_make -M -e FAIL version.good
# Try to verify that we errored out for the right reason.
$FGREP version.gin output
diff --git a/t/color-tests2.sh b/t/color-tests2.sh
index 09ebff9..6dcd207 100644
--- a/t/color-tests2.sh
+++ b/t/color-tests2.sh
@@ -152,6 +152,13 @@ test_no_color ()
fi
}
+our_make ()
+{
+ set "MAKE=$MAKE" ${1+"$@"}
+ env "$@" expect -f $srcdir/expect-make >stdout || { cat stdout; exit 1; }
+ cat stdout
+}
+
cat >expect-make <<'END'
eval spawn $env(MAKE) -e check
expect eof
@@ -169,31 +176,21 @@ for vpath in false :; do
$srcdir/configure
- TERM=ansi MAKE=$MAKE expect -f $srcdir/expect-make >stdout \
- || { cat stdout; exit 1; }
- cat stdout
+ our_make TERM=ansi
test_color
- TERM=dumb MAKE=$MAKE expect -f $srcdir/expect-make >stdout \
- || { cat stdout; exit 1; }
- cat stdout
+ our_make TERM=dumb
test_no_color
- AM_COLOR_TESTS=no MAKE=$MAKE expect -f $srcdir/expect-make >stdout \
- || { cat stdout; exit 1; }
- cat stdout
+ our_make AM_COLOR_TESTS=no
test_no_color
$srcdir/configure testsuite_colorized=false
- TERM=ansi MAKE=$MAKE expect -f $srcdir/expect-make >stdout \
- || { cat stdout; exit 1; }
- cat stdout
+ our_make TERM=ansi
test_no_color
- TERM=ansi MAKE="env AM_COLOR_TESTS=always $MAKE" \
- expect -f $srcdir/expect-make >stdout || { cat stdout; exit 1; }
- cat stdout
+ our_make TERM=ansi MAKE="env AM_COLOR_TESTS=always $MAKE"
test_color
$MAKE distclean
diff --git a/t/cond34.sh b/t/cond34.sh
index ea78a71..995aab9 100644
--- a/t/cond34.sh
+++ b/t/cond34.sh
@@ -54,22 +54,18 @@ $AUTOCONF
$AUTOMAKE
./configure
-$MAKE dep-test1 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O dep-test1
$FGREP 'BEG: one.z somethingelse.a :END' stdout
-$MAKE dep-test2 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O dep-test2
$FGREP 'BEG: three.z :END' stdout
./configure two=2
-$MAKE dep-test1 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O dep-test1
$FGREP 'BEG: two.z somethingelse.a :END' stdout
-$MAKE dep-test2 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O dep-test2
$FGREP 'BEG: two.z somethingelse.a :END' stdout
:
diff --git a/t/cond37.sh b/t/cond37.sh
index 18beca1..4295937 100644
--- a/t/cond37.sh
+++ b/t/cond37.sh
@@ -39,19 +39,15 @@ $AUTOCONF
$AUTOMAKE
./configure
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
grep GrepMe1 stdout && exit 1
-$MAKE install >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O install
grep GrepMe2 stdout
./configure case_A=1
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
grep GrepMe1 stdout
-$MAKE install >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O install
grep GrepMe2 stdout && exit 1
:
diff --git a/t/cond39.sh b/t/cond39.sh
index 3e33d00..819b014 100644
--- a/t/cond39.sh
+++ b/t/cond39.sh
@@ -78,8 +78,7 @@ $AUTOCONF
$AUTOMAKE --add-missing
./configure COND=true
-$MAKE 2>stderr || { cat stderr >&2; exit 1; }
-cat stderr >&2
+run_make -E
grep 'overriding commands' stderr && exit 1
$MAKE sure-exist
./prog1 && exit 1
@@ -93,8 +92,7 @@ $MAKE sure-exist
$MAKE distclean
./configure COND=false
-$MAKE 2>stderr || { cat stderr >&2; exit 1; }
-cat stderr >&2
+run_make -E
grep 'overriding commands' stderr && exit 1
./prog1
./sub/prog2
diff --git a/t/conff.sh b/t/conff.sh
index 450d7be..bebed77 100644
--- a/t/conff.sh
+++ b/t/conff.sh
@@ -47,11 +47,9 @@ $AUTOMAKE
$MAKE
cd bar
-$MAKE top-rule >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O top-rule
grep 'top rule' stdout
-$MAKE bot-rule >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O bot-rule
grep 'bot rule' stdout
cd ..
@@ -64,11 +62,9 @@ END
$MAKE
cd bar
-$MAKE top-rule >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O top-rule
grep 'top2 rule' stdout
-$MAKE bot-rule >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O bot-rule
grep 'bot rule' stdout
cd ..
@@ -81,11 +77,9 @@ END
$MAKE
cd bar
-$MAKE top-rule >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O top-rule
grep 'top2 rule' stdout
-$MAKE bot-rule >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O bot-rule
grep 'bot2 rule' stdout
cd ..
diff --git a/t/conffile-leading-dot.sh b/t/conffile-leading-dot.sh
index 6c6e57a..aebeea5 100644
--- a/t/conffile-leading-dot.sh
+++ b/t/conffile-leading-dot.sh
@@ -54,8 +54,7 @@ $sleep
touch Makefile.am
# Check that remake rules do truly break -- otherwise automake is
# giving a bogus warning.
-$MAKE 2>stderr && { cat stderr >&2; exit 1; }
-cat stderr >&2
+run_make -e FAIL -E
grep "config\\.status:.*invalid argument.*Makefile" stderr
:
diff --git a/t/cscope.tap b/t/cscope.tap
index 29feec2..88d498b 100644
--- a/t/cscope.tap
+++ b/t/cscope.tap
@@ -105,8 +105,7 @@ test_cscope ()
fi
r=ok
- $MAKE cscope 2>stderr || r='not ok'
- cat stderr >&2
+ run_make -E cscope || r='not ok'
grep 'cannot find file' stderr && r='not ok'
rm -f stderr
result_ "$r" "[$pfx] make cscope"
diff --git a/t/dejagnu3.sh b/t/dejagnu3.sh
index 8aac44f..576edc7 100644
--- a/t/dejagnu3.sh
+++ b/t/dejagnu3.sh
@@ -62,9 +62,8 @@ $MAKE distcheck
# Ensure that the envvar RUNTESTFLAGS is used.
# Report from Mark Mitchell.
-RUNTESTFLAGS=--unknown-runtest-option $MAKE check >output 2>&1 \
- && { cat output; exit 1; }
-cat output
+RUNTESTFLAGS=--unknown-runtest-option; export RUNTESTFLAGS
+run_make -M -e FAIL check
$FGREP 'unknown-runtest-option' output
:
diff --git a/t/deleted-am.sh b/t/deleted-am.sh
index 5e066b3..980a27a 100644
--- a/t/deleted-am.sh
+++ b/t/deleted-am.sh
@@ -36,8 +36,7 @@ $MAKE
rm -f zardoz.am
$sleep # Required to avoid racy failures with FreeBSD make.
-$MAKE >output 2>&1 && { cat output; exit 1; }
-cat output
+run_make -e FAIL -M
# This error will come from automake, not make, so we can be stricter
# in our grepping of it.
grep 'cannot open.*zardoz\.am' output
@@ -50,8 +49,7 @@ $AUTOMAKE Makefile
$MAKE # Sanity check.
rm -f foobar.am
$sleep # Required to avoid racy failures with FreeBSD make.
-$MAKE >output 2>&1 && { cat output; exit 1; }
-cat output
+run_make -e FAIL -M
# This error will come from automake, not make, so we can be stricter
# in our grepping of it.
grep 'cannot open.*foobar\.am' output
diff --git a/t/deleted-m4.sh b/t/deleted-m4.sh
index 15ee1de..1f4f7a9 100644
--- a/t/deleted-m4.sh
+++ b/t/deleted-m4.sh
@@ -39,8 +39,7 @@ $AUTOMAKE
$MAKE
rm -f zardoz.m4
-$MAKE >output 2>&1 && { cat output; exit 1; }
-cat output
+run_make -e FAIL -M
# This error will come from aclocal, not make, so we can be stricter
# in our grepping of it.
grep ' foobar\.m4:1:.*zardoz\.m4.*does not exist' output
@@ -54,8 +53,7 @@ $AUTOCONF
./configure
$MAKE # Sanity check.
rm -f foobar.m4
-$MAKE >output 2>&1 && { cat output; exit 1; }
-cat output
+run_make -e FAIL -M
# This error will come from aclocal, not make, so we can be stricter
# in our grepping of it.
grep 'foobar\.m4.*does not exist' output
diff --git a/t/dist-missing-am.sh b/t/dist-missing-am.sh
index 86d513b..dd074bd 100644
--- a/t/dist-missing-am.sh
+++ b/t/dist-missing-am.sh
@@ -54,8 +54,7 @@ for vpath in false :; do
cd $distdir
./configure
fi
- $MAKE >output 2>&1 && { cat output; exit 1; }
- cat output
+ run_make -e FAIL -M
# This error comes from automake, not make, so we can be stricter
# in our grepping of it.
grep 'cannot open.*zardoz\.am' output
diff --git a/t/dist-missing-included-m4.sh b/t/dist-missing-included-m4.sh
index c4c7e5a..e14a38e 100644
--- a/t/dist-missing-included-m4.sh
+++ b/t/dist-missing-included-m4.sh
@@ -56,8 +56,7 @@ for vpath in false :; do
cd $distdir
./configure
fi
- $MAKE >output 2>&1 && { cat output; exit 1; }
- cat output
+ run_make -e FAIL -M
# This error will come from automake, not make, so we can be stricter
# in our grepping of it.
grep 'zardoz\.m4.*does not exist' output
diff --git a/t/dist-missing-m4.sh b/t/dist-missing-m4.sh
index fd8a683..a2a8723 100644
--- a/t/dist-missing-m4.sh
+++ b/t/dist-missing-m4.sh
@@ -58,8 +58,7 @@ for vpath in false :; do
cd $distdir
./configure
fi
- $MAKE >output 2>&1 && { cat output; exit 1; }
- cat output
+ run_make -e FAIL -M
# This error will come from autoconf, not make, so we can be stricter
# in our grepping of it.
grep 'possibly undefined .*MY_ZARDOZ' output
diff --git a/t/distcheck-configure-flags-am.sh
b/t/distcheck-configure-flags-am.sh
index b1fd49b..0d9a8d5 100644
--- a/t/distcheck-configure-flags-am.sh
+++ b/t/distcheck-configure-flags-am.sh
@@ -59,8 +59,7 @@ END
$AUTOMAKE Makefile
./config.status Makefile
-$MAKE distcheck >output 2>&1 && { cat output; exit 1; }
-cat output
+run_make -e FAIL -M distcheck
grep "^configure:.* success='no', sentence='it works :-)'" output
$MAKE distcheck DISTCHECK_CONFIGURE_FLAGS="--enable-success=yes"
diff --git a/t/distcheck-configure-flags-subpkg.sh
b/t/distcheck-configure-flags-subpkg.sh
index 24e8453..4693907 100644
--- a/t/distcheck-configure-flags-subpkg.sh
+++ b/t/distcheck-configure-flags-subpkg.sh
@@ -74,8 +74,7 @@ $MAKE distcheck
# ... but not when "make distcheck" is run from the subpackage.
cd subpkg
-$MAKE distcheck >output 2>&1 && { cat output; exit 1; }
-cat output
+run_make -e FAIL -M distcheck
grep '^configure:.* dc=KO am_dc=KO' output
:
diff --git a/t/distcheck-configure-flags.sh b/t/distcheck-configure-flags.sh
index dece1c4..3674e03 100644
--- a/t/distcheck-configure-flags.sh
+++ b/t/distcheck-configure-flags.sh
@@ -48,8 +48,7 @@ $MAKE distcheck \
DISTCHECK_CONFIGURE_FLAGS="--enable-success=yes sentence='it works :-)'"
# Sanity check.
-$MAKE distcheck >output 2>&1 && { cat output; exit 1; }
-cat output
+run_make -M -e FAIL distcheck
grep "^configure:.* success='no', sentence=''" output
:
diff --git a/t/distcheck-missing-m4.sh b/t/distcheck-missing-m4.sh
index e430c62..ee492fd 100644
--- a/t/distcheck-missing-m4.sh
+++ b/t/distcheck-missing-m4.sh
@@ -74,8 +74,7 @@ check_no_spurious_error ()
./configure
-$MAKE distcheck >output 2>&1 && { cat output; exit 1; }
-cat output
+run_make -M -e FAIL distcheck
for x in bar baz zar; do
$EGREP "required m4 file.*not distributed.* $x.m4( |$)" output
done
@@ -100,8 +99,7 @@ END
$MAKE
$EGREP 'MY_(FOO|BAR|BAZ|QUX|ZAR|BLA)' configure && exit 1 # Sanity check.
-$MAKE distcheck >output 2>&1 && { cat output; exit 1; }
-cat output
+run_make -M -e FAIL distcheck
$EGREP "required m4 file.*not distributed.* qux.m4( |$)" output
$EGREP "required m4 file.*not distributed.* bla.m4( |$)" output
check_no_spurious_error
diff --git a/t/distcheck-outdated-m4.sh b/t/distcheck-outdated-m4.sh
index a078f31..84a08f4 100644
--- a/t/distcheck-outdated-m4.sh
+++ b/t/distcheck-outdated-m4.sh
@@ -79,9 +79,7 @@ AC_DEFUN([MY_ZARDOZ], [:])
END
$MAKE # Rebuild configure and makefiles.
-$MAKE distcheck >output 2>&1 && { cat output; exit 1; }
-cat output
-
+run_make -M -e FAIL distcheck
$EGREP "required m4 file.* outdated.* baz.m4( |$)" output
check_no_spurious_error
# Check that we don't complain for files that aren't outdated.
@@ -121,8 +119,7 @@ AC_DEFUN([MY_FNORD], [:])
END
$MAKE # Rebuild configure and makefiles.
-$MAKE distcheck >output 2>&1 && { cat output; exit 1; }
-cat output
+run_make -M -e FAIL distcheck
$EGREP "required m4 file.* outdated.* fnord.m4( |$)" output
check_no_spurious_error
# Check that we don't complain for files that aren't outdated.
diff --git a/t/distcheck-pr10470.sh b/t/distcheck-pr10470.sh
index a8e68c4..f6cb160 100644
--- a/t/distcheck-pr10470.sh
+++ b/t/distcheck-pr10470.sh
@@ -49,8 +49,7 @@ $AUTOMAKE
./configure
# We can build the distribution.
-$MAKE distcheck >output 2>&1 || { cat output; exit 1; }
-cat output
+run_make -M -e FAIL distcheck
# Sanity check: verify that our code has hit a problem removing
# the distdir, but has recovered from it.
grep "rm:.*$destdir" output || fatal_ "expected code path not covered"
diff --git a/t/distcheck-pr9579.sh b/t/distcheck-pr9579.sh
index 176e76d..b822e5c 100644
--- a/t/distcheck-pr9579.sh
+++ b/t/distcheck-pr9579.sh
@@ -54,9 +54,7 @@ $MAKE uninstall
test -f inst/share/dir
rm -rf inst
-$MAKE distcheck >output 2>&1 && { cat output; exit 1; }
-cat output
-
+run_make -M -e FAIL distcheck
$FGREP 'ERROR: files left after uninstall:' output
grep '/share/dir *$' output
@@ -86,9 +84,7 @@ test -f inst/mu/share/info/dir
test -f inst/share/info/more/dir
rm -rf inst
-$MAKE distcheck >output 2>&1 && { cat output; exit 1; }
-cat output
-
+run_make -M -e FAIL distcheck
$FGREP 'ERROR: files left after uninstall:' output
grep '/mu/share/info/dir *$' output
grep '/share/info/more/dir *$' output
diff --git a/t/distcleancheck.sh b/t/distcleancheck.sh
index 5e5bb9e..b91d835 100644
--- a/t/distcleancheck.sh
+++ b/t/distcleancheck.sh
@@ -62,9 +62,7 @@ mv -f t Makefile.am
$AUTOMAKE
./configure
$MAKE
-$MAKE distcheck 2>stderr && { cat srderr >&2; exit 1; }
-cat stderr >&2
-
+run_make -E -e FAIL distcheck
grep 'ERROR:.*files left in build directory after distclean' stderr
grep '^\./foo\.1$' stderr
diff --git a/t/distlinksbrk.sh b/t/distlinksbrk.sh
index 825884e..d2b3d0f 100644
--- a/t/distlinksbrk.sh
+++ b/t/distlinksbrk.sh
@@ -60,9 +60,8 @@ for lnk in $lnk1 $lnk2 $lnka $lnkb; do
$AUTOMAKE
./configure
# Distribution must fail, with a decent error message.
- $MAKE distdir >out 2>&1 && { cat out; exit 1; }
- cat out
- $FGREP $lnk out
+ run_make -M -e FAIL distdir
+ $FGREP $lnk output
done
:
diff --git a/t/extra-deps-lt.sh b/t/extra-deps-lt.sh
index 8d4af44..0950941 100644
--- a/t/extra-deps-lt.sh
+++ b/t/extra-deps-lt.sh
@@ -68,8 +68,7 @@ $AUTOCONF
: >foodep
: >foodep2
: >bardep
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
grep 'making libfoodep' stdout
rm -f bardep
diff --git a/t/extra-deps.sh b/t/extra-deps.sh
index 3bd6d1d..6446b57 100644
--- a/t/extra-deps.sh
+++ b/t/extra-deps.sh
@@ -78,8 +78,7 @@ $AUTOCONF
: >foodep
: >foodep2
: >bardep
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
grep 'making libfoodep' stdout
rm -f foodep
diff --git a/t/fn99.sh b/t/fn99.sh
index e98d0fd..c01eac1 100644
--- a/t/fn99.sh
+++ b/t/fn99.sh
@@ -43,8 +43,7 @@ $MAKE distcheck
mkdir -p 12345678 && cd 12345678 && touch x || exit 1
done) || skip_ "failed to create deeper directory hierarchy"
-$MAKE dist 2>stderr && { cat stderr >&2; exit 1; }
-cat stderr >&2
+run_make -E -e FAIL dist
grep 'filenames are too long' stderr
test 2 -eq $(grep -c 12345678 stderr)
diff --git a/t/fn99subdir.sh b/t/fn99subdir.sh
index 9ef09ef..7b11db3 100644
--- a/t/fn99subdir.sh
+++ b/t/fn99subdir.sh
@@ -73,8 +73,7 @@ for i in 1 2 3 4 5 6 7 8 9; do
mkdir -p 12345678 && cd 12345678 && touch x || exit 1
done) || skip_ "failed to create deeper directory hierarchy"
-$MAKE dist 2>stderr && { cat stderr >&2; exit 1; }
-cat stderr >&2
+run_make -E -e FAIL dist
grep 'filenames are too long' stderr
test 1 -eq $(grep -c 12345678 stderr)
diff --git a/t/gnits2.sh b/t/gnits2.sh
index 98e92e4..b1bf520 100644
--- a/t/gnits2.sh
+++ b/t/gnits2.sh
@@ -107,8 +107,9 @@ cd build
../configure "--prefix=$(pwd)/../inst-dir" --program-prefix=p
$MAKE all
$MAKE test-install
-$MAKE -k installcheck 2>stderr || : # Never trust the exit status of make -k.
-cat stderr >&2
+# Don't trust th exit status of "make -k" for non-GNU makes.
+if using_gmake; then status=FAIL; else status=IGNORE; fi
+run_make -e $status -E -- -k installcheck
$MAKE grep-stderr
:
diff --git a/t/gnits3.sh b/t/gnits3.sh
index 097fe8f..eb7f9a7 100644
--- a/t/gnits3.sh
+++ b/t/gnits3.sh
@@ -87,8 +87,9 @@ cd build
$MAKE
$MAKE install
$MAKE installcheck && exit 1
-$MAKE -k installcheck 2>stderr || : # Never trust the exit status of make -k.
-cat stderr >&2
+# Don't trust th exit status of "make -k" for non-GNU makes.
+if using_gmake; then status=FAIL; else status=IGNORE; fi
+run_make -e $status -E -- -k installcheck
$MAKE grep-stderr
# Make sure there is no more error when all targets are exempted.
diff --git a/t/install-info-dir.sh b/t/install-info-dir.sh
index 8bb7401..b16824f 100644
--- a/t/install-info-dir.sh
+++ b/t/install-info-dir.sh
@@ -118,8 +118,7 @@ echo error from install-info >&2
exit 127
END
chmod a+x bin/install-info
-$MAKE install-info >output 2>&1 || { cat output; exit 1; }
-cat output
+run_make -M install-info
test -f $instdir/info/foo.info
test ! -e $instdir/info/dir
grep 'error from install-info' output && exit 1
diff --git a/t/libtool7.sh b/t/libtool7.sh
index f08ed2b..2a5b62b 100644
--- a/t/libtool7.sh
+++ b/t/libtool7.sh
@@ -79,30 +79,20 @@ $AUTOCONF
$AUTOMAKE --add-missing --copy
./configure "--prefix=$(pwd)/_inst"
-env LIBTOOLFLAGS=--silent $MAKE print >output 2>&1 || {
- cat output
- exit 1
-}
-cat output
+
+run_make -M print LIBTOOLFLAGS=--silent
grep '1BEG: libmod1.la mod2.la :END1' output
grep '2BEG: mod2.la :END2' output
grep '3BEG: .*silent.*silent.* :END3' output
test 2 -le $(grep mod2_la_LIBTOOLFLAGS Makefile | wc -l)
+
$MAKE
-env LIBTOOLFLAGS=--silent $MAKE install >output 2>&1 || {
- cat output
- exit 1
-}
-cat output
+run_make -M install LIBTOOLFLAGS=--silent
grep 'silent.*silent.*prg' output
grep 'silent.*silent.*libmod1' output
-env LIBTOOLFLAGS=--silent $MAKE uninstall >output 2>&1 || {
- cat output
- exit 1
-}
-cat output
+run_make -M uninstall LIBTOOLFLAGS=--silent
grep 'silent.*silent.*libmod1' output
:
diff --git a/t/lisp7.sh b/t/lisp7.sh
index da461ac..b58059b 100644
--- a/t/lisp7.sh
+++ b/t/lisp7.sh
@@ -37,9 +37,7 @@ $AUTOCONF
$AUTOMAKE --add-missing
./configure
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
-
+run_make -O
test ! -e am-one.elc
test ! -e am-two.elc
test ! -e am-three.elc
diff --git a/t/lisp8.sh b/t/lisp8.sh
index d68d467..efb785c 100644
--- a/t/lisp8.sh
+++ b/t/lisp8.sh
@@ -38,9 +38,10 @@ $AUTOMAKE --add-missing
./configure
# Use append mode here to avoid dropping output. See automake bug#11413.
+# TODO: port this to to run_make(), and rewrite this hunk to use that
+# function ...
: >stdout
$MAKE -j >>stdout || { cat stdout; exit 1; }
-
cat stdout
test -f am-one.elc
@@ -50,10 +51,12 @@ test -f am-three.elc
rm -f am-*.elc
# Use append mode here to avoid dropping output. See automake bug#11413.
+# TODO: port this to to run_make(), and rewrite this hunk to use that
+# function ...
: >stdout
$MAKE -j >>stdout || { cat stdout; exit 1; }
-
cat stdout
+
test -f am-one.elc
test -f am-two.elc
test -f am-three.elc
diff --git a/t/ltorder.sh b/t/ltorder.sh
index fe9d7bd..82ad9fc 100644
--- a/t/ltorder.sh
+++ b/t/ltorder.sh
@@ -52,8 +52,7 @@ $AUTOMAKE --add-missing
./configure --prefix="$(pwd)/inst"
$MAKE
-$MAKE install 2>stderr || { cat stderr >&2; exit 1; }
-cat stderr >&2
+run_make -E install
grep 'has not been installed' stderr && exit 1
$MAKE uninstall
diff --git a/t/make-is-gnu.sh b/t/make-is-gnu.sh
index 79397da..a4b7faa 100644
--- a/t/make-is-gnu.sh
+++ b/t/make-is-gnu.sh
@@ -52,8 +52,7 @@ fi
rm -f ok ko
-$MAKE -s file >output 2>&1
-cat output
+run_make -M -- -s file
if using_gmake; then
test -f ok
test ! -e ko
diff --git a/t/maken3.sh b/t/maken3.sh
index ae4b219..171d716 100644
--- a/t/maken3.sh
+++ b/t/maken3.sh
@@ -142,8 +142,7 @@ check_targets ()
install-info install-html install-dvi install-pdf install-ps \
installcheck installdirs tags mostlyclean maintainer-clean
do
- $MAKE -n $target >stdout || { cat stdout; exit 1; }
- cat stdout
+ run_make -O -- -n $target
case $target in
install-* | installdirs | tags ) ;;
*)
diff --git a/t/output7.sh b/t/output7.sh
index 8ec74bc..d8832db 100644
--- a/t/output7.sh
+++ b/t/output7.sh
@@ -63,10 +63,9 @@ $ACLOCAL
$AUTOCONF
$AUTOMAKE
./configure
-$MAKE >output
-cat output
-grep in--mk output
-grep in--sub output
-grep at--toplevel output
+run_make -O
+grep in--mk stdout
+grep in--sub stdout
+grep at--toplevel stdout
$MAKE distcheck
diff --git a/t/parallel-tests-basics.sh b/t/parallel-tests-basics.sh
index dbd7ac8..1d25cbc 100644
--- a/t/parallel-tests-basics.sh
+++ b/t/parallel-tests-basics.sh
@@ -64,8 +64,7 @@ $AUTOMAKE -a
./configure
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=3 pass=1 fail=1 skip=0 xfail=0 xpass=0 error=1
test -f test-suite.log
cat test-suite.log
diff --git a/t/parallel-tests-concurrency.sh b/t/parallel-tests-concurrency.sh
index e20c82e..dd51225 100644
--- a/t/parallel-tests-concurrency.sh
+++ b/t/parallel-tests-concurrency.sh
@@ -17,6 +17,9 @@
# Check parallel-tests features:
# - concurrent parallel execution
+# FIXME: we should factorize the code to determine how to run
+# make in parallel out in am-test-lib.sh ...
+
. test-init.sh
case $MAKE in
@@ -90,6 +93,8 @@ $MAKE ${j}1 check &
cd ../parallel
$sleep
# Use append mode here to avoid dropping output. See automake bug#11413.
+# TODO: port this to to run_make(), and rewrite this hunk to use that
+# function ...
: > stdout
$MAKE ${j}4 check >> stdout
cd ..
diff --git a/t/parallel-tests-console-output.sh
b/t/parallel-tests-console-output.sh
index 2b8cebf..ea3c15b 100644
--- a/t/parallel-tests-console-output.sh
+++ b/t/parallel-tests-console-output.sh
@@ -92,8 +92,7 @@ for vpath in : false; do
srcdir=.
fi
$srcdir/configure
- $MAKE check >stdout && { cat stdout; exit 1; }
- cat stdout
+ run_make -O -e FAIL check
LC_ALL=C grep '^[A-Z][A-Z]*:' stdout > got
cat got
diff $srcdir/exp got
diff --git a/t/parallel-tests-dry-run-2.sh b/t/parallel-tests-dry-run-2.sh
index 087e22f..efb96e1 100644
--- a/t/parallel-tests-dry-run-2.sh
+++ b/t/parallel-tests-dry-run-2.sh
@@ -37,8 +37,7 @@ $AUTOCONF
make_n_ ()
{
st=0
- $MAKE -n "$@" >output 2>&1 || { cat output; ls -l; exit 1; }
- cat output
+ run_make -M -- -n "$@" || { ls -l; exit 1; }
# Look out for possible errors from common tools used by recipes.
$EGREP -i ' (exist|permission|denied|no .*(such|file))' output && exit 1
$EGREP '(mv|cp|rm|cat|grep|sed|awk): ' output && exit 1
diff --git a/t/parallel-tests-empty.sh b/t/parallel-tests-empty.sh
index 1407c5a..d431bf2 100644
--- a/t/parallel-tests-empty.sh
+++ b/t/parallel-tests-empty.sh
@@ -20,6 +20,7 @@
# See 'parallel-tests-trailing-whitespace.sh' for a similar issue.
. test-init.sh
+
cat >> configure.ac << 'END'
AC_OUTPUT
END
@@ -33,10 +34,9 @@ $AUTOCONF
$AUTOMAKE -a
./configure
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
for x in TOTAL PASS FAIL XPASS FAIL SKIP ERROR; do
grep "^# $x: *0$" stdout
done
-exit 0
+:
diff --git a/t/parallel-tests-extra-programs.sh
b/t/parallel-tests-extra-programs.sh
index 03800a8..4df28ad 100644
--- a/t/parallel-tests-extra-programs.sh
+++ b/t/parallel-tests-extra-programs.sh
@@ -115,13 +115,10 @@ $AUTOMAKE -a
# 'test-suite.log' file shouldn't be created (as it depends
# on *all* the test logs).
-st=0
-$MAKE -k check >stdout 2>stderr || st=$?
-cat stdout
-cat stderr >&2
+run_make -E -O -e IGNORE -- -k check
ls -l
if using_gmake; then
- test $st -gt 0 || exit 1
+ test $am_make_rc_got -gt 0 || exit 1
else
# Don't trust exit status of "make -k" for non-GNU make.
$MAKE check && exit 1
diff --git a/t/parallel-tests-fd-redirect-exeext.sh
b/t/parallel-tests-fd-redirect-exeext.sh
index 41f3098..e4d7caa 100644
--- a/t/parallel-tests-fd-redirect-exeext.sh
+++ b/t/parallel-tests-fd-redirect-exeext.sh
@@ -104,12 +104,10 @@ grep '^\.test\$(EXEEXT)\.log:' Makefile || st=1
grep '^qux\.log:' Makefile && st=1
test $st -eq 0 || fatal_ "doesn't cover expected code paths"
-st=0
-$MAKE check >stdout || st=1
-cat stdout
+run_make -O -e IGNORE check
cat baz.log
cat qux.log
-test $st -eq 0
+test $am_make_rc_got -eq 0
grep "^ bazbazbaz$" stdout
grep "^ quxquxqux$" stdout
$EGREP '(bazbazbaz|quxquxqux)' *.log && exit 1
diff --git a/t/parallel-tests-fd-redirect.sh b/t/parallel-tests-fd-redirect.sh
index c723203..1ccaf74 100644
--- a/t/parallel-tests-fd-redirect.sh
+++ b/t/parallel-tests-fd-redirect.sh
@@ -57,11 +57,10 @@ grep '^bar\.log:.*bar' Makefile || st=1
grep '^foo\.log:' Makefile && st=1
test $st -eq 0 || fatal_ "doesn't cover expected code paths"
-st=0; $MAKE check >stdout || st=1
-cat stdout
+run_make -O -e IGNORE check
cat foo.log
cat bar.log
-test $st -eq 0
+test $am_make_rc_got -eq 0
grep "^ foofoofoo$" stdout
grep "^ barbarbar$" stdout
$EGREP '(foofoofoo|barbarbar)' *.log && exit 1
diff --git a/t/parallel-tests-log-override-recheck.sh
b/t/parallel-tests-log-override-recheck.sh
index 2bfac7f..2d667ac 100644
--- a/t/parallel-tests-log-override-recheck.sh
+++ b/t/parallel-tests-log-override-recheck.sh
@@ -61,8 +61,7 @@ filter_stdout ()
}
./configure
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
using_gmake || $sleep # Required by BSD make.
diff --git a/t/parallel-tests-no-spurious-summary.sh
b/t/parallel-tests-no-spurious-summary.sh
index b720059..300d593 100644
--- a/t/parallel-tests-no-spurious-summary.sh
+++ b/t/parallel-tests-no-spurious-summary.sh
@@ -49,13 +49,11 @@ $AUTOMAKE -a
./configure
-st=0
-$MAKE check >stdout || st=$?
-cat stdout
+run_make -O -e IGNORE check
cat test-suite.log
cat foo.log
cat bar.log
-test $st -eq 0 || exit $st
+test $am_make_rc_got -eq 0
grep '^:test-result:XFAIL$' foo.log
grep '^:test-result: SKIP$' foo.log
diff --git a/t/parallel-tests-recheck-depends-on-all.sh
b/t/parallel-tests-recheck-depends-on-all.sh
index e2c6916..544e2de 100644
--- a/t/parallel-tests-recheck-depends-on-all.sh
+++ b/t/parallel-tests-recheck-depends-on-all.sh
@@ -63,8 +63,7 @@ $AUTOCONF
$AUTOMAKE -a
./configure
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=3 pass=1 fail=2 skip=0 xfail=0 xpass=0 error=0
test ! -e status
@@ -79,14 +78,12 @@ int main (void)
}
END
-$MAKE recheck >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O recheck
count_test_results total=2 pass=2 fail=0 skip=0 xfail=0 xpass=0 error=0
grep '^PASS: b\.test$' stdout
grep '^PASS: c\.test$' stdout
-$MAKE recheck >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O recheck
count_test_results total=0 pass=0 fail=0 skip=0 xfail=0 xpass=0 error=0
:
diff --git a/t/parallel-tests-recheck-pr11791.sh
b/t/parallel-tests-recheck-pr11791.sh
index d0629f6..cad1969 100644
--- a/t/parallel-tests-recheck-pr11791.sh
+++ b/t/parallel-tests-recheck-pr11791.sh
@@ -38,23 +38,20 @@ $AUTOMAKE -a
./configure
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=1 pass=0 fail=1 xpass=0 xfail=0 skip=0 error=0
$sleep # Required to avoid a spurious failure with some FreeBSD makes.
-st=0; $MAKE -k recheck >stdout || st=$?
-cat stdout
+run_make -O -e IGNORE -- -k recheck
# Don't trust the exit status of "make -k" for non-GNU makes.
-if using_gmake && test $st -eq 0; then exit 1; fi
+! using_gmake || test $am_make_rc_got -gt 0 || exit 1
count_test_results total=1 pass=0 fail=1 xpass=0 xfail=0 skip=0 error=0
# Introduce an error in foo.c, that should cause a compilation failure.
$sleep
echo choke me >> foo.c
-$MAKE recheck >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL recheck
# We don't get a change to run the testsuite.
$EGREP '(X?PASS|X?FAIL|SKIP|ERROR):' stdout && exit 1
# These shouldn't be removed, otherwise the next make recheck will do
@@ -63,10 +60,9 @@ test -f foo.log
test -f foo.trs
$sleep # Required to avoid a spurious failure with some FreeBSD makes.
-st=0; $MAKE -k recheck >stdout || st=$?
-cat stdout
+run_make -O -e IGNORE -- -k recheck
# Don't trust the exit status of "make -k" for non-GNU makes.
-if using_gmake && test $st -eq 0; then exit 1; fi
+! using_gmake || test $am_make_rc_got -gt 0 || exit 1
# We don't get a change to run the testsuite.
$EGREP '(X?PASS|X?FAIL|SKIP|ERROR):' stdout && exit 1
test -f foo.log
@@ -76,14 +72,12 @@ test -f foo.trs
$sleep
echo 'int main (void) { return 0; }' > foo.c
-$MAKE recheck >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O recheck
count_test_results total=1 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=0
test -f foo.log
test -f foo.trs
-$MAKE recheck >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O recheck
count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0
test -f foo.log
test -f foo.trs
diff --git a/t/parallel-tests-recheck.sh b/t/parallel-tests-recheck.sh
index c32d7f1..6bba9c8 100644
--- a/t/parallel-tests-recheck.sh
+++ b/t/parallel-tests-recheck.sh
@@ -55,16 +55,14 @@ $AUTOCONF
$AUTOMAKE -a
./configure
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=3 pass=1 fail=1 skip=0 xfail=0 xpass=0 error=1
# Running this two times in a row should produce the same results the
# second time.
for i in 1 2; do
using_gmake || $sleep # Required by BSD make.
- $MAKE recheck >stdout && { cat stdout; exit 1; }
- cat stdout
+ run_make -O -e FAIL recheck
count_test_results total=2 pass=0 fail=1 skip=0 xfail=0 xpass=0 error=1
grep 'foo\.test' stdout && exit 1
grep '^ERROR: bar\.test$' stdout
diff --git a/t/parallel-tests-reset-term.sh b/t/parallel-tests-reset-term.sh
index fb737bc..187a503 100644
--- a/t/parallel-tests-reset-term.sh
+++ b/t/parallel-tests-reset-term.sh
@@ -41,15 +41,11 @@ chmod a+x foobar
mkcheck ()
{
- if $MAKE "$@" check > stdout; then
- rc=0
- else
- rc=1
- fi
+ run_make -O -e IGNORE "$@" check
cat stdout
cat foobar.log
cat test-suite.log
- return $rc
+ return $am_make_rc_got
}
$ACLOCAL
diff --git a/t/pluseq10.sh b/t/pluseq10.sh
index e283ca7..c80d23a 100644
--- a/t/pluseq10.sh
+++ b/t/pluseq10.sh
@@ -48,8 +48,7 @@ $AUTOCONF
$AUTOMAKE
./configure
-$MAKE print >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O print
$FGREP 'BEG: 0.h a0.h a1.h a2.h a3.h :END' stdout
:
diff --git a/t/posixsubst-tests.sh b/t/posixsubst-tests.sh
index bdb7957..a7617c5 100644
--- a/t/posixsubst-tests.sh
+++ b/t/posixsubst-tests.sh
@@ -54,13 +54,12 @@ $AUTOCONF
$AUTOMAKE -a
./configure
-$MAKE check >out 2>&1 && { cat out; exit 1; }
-cat out
+run_make -M -e FAIL check
ls -l
-grep '^FAIL: foo1\.test *$' out
-grep '^PASS: foo2\.test *$' out
-grep '^FAIL: bary *$' out
-grep '^PASS: barz *$' out
+grep '^FAIL: foo1\.test *$' output
+grep '^PASS: foo2\.test *$' output
+grep '^FAIL: bary *$' output
+grep '^PASS: barz *$' output
test -f foo1.out
test -f bary.out
diff --git a/t/pr300-ltlib.sh b/t/pr300-ltlib.sh
index b3d759f..3994e36 100644
--- a/t/pr300-ltlib.sh
+++ b/t/pr300-ltlib.sh
@@ -53,8 +53,7 @@ cwd=$(pwd) || fatal_ "getting current working directory"
# A rule in the Makefile should create subdir.
test ! -e subdir
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
test -d subdir
grep 'liba.la .*-rpath .*lib' stdout
@@ -64,8 +63,7 @@ grep 'libb.la .*-rpath .*lib/subdir' stdout
test -f subdir/liba.la
test -f subdir/libb.la
-$MAKE install 2>stderr || { cat stderr >&2; exit 1; }
-cat stderr >&2
+run_make -E install
grep 'remember.*--finish' stderr && exit 1
test -f inst/lib/liba.la
diff --git a/t/remake-aclocal-version-mismatch.sh
b/t/remake-aclocal-version-mismatch.sh
index cb40864..6da7bad 100644
--- a/t/remake-aclocal-version-mismatch.sh
+++ b/t/remake-aclocal-version-mismatch.sh
@@ -34,13 +34,11 @@ cmp aclocal.m4 aclocal.tmp && exit 1
mv aclocal.tmp aclocal.m4
-$MAKE 2>stderr || { cat cat stderr >&2; exit 1; }
-cat stderr >&2
+run_make -E
grep 'You have another version of autoconf' stderr
grep 'aclocal.m4:.*this file was generated for' stderr
-$MAKE 2>stderr || { cat cat stderr >&2; exit 1; }
-cat stderr >&2
+run_make -E
grep 'You have another version of autoconf' stderr && exit 1
grep 'aclocal.m4:.*this file was generated for' stderr && exit 1
diff --git a/t/remake-subdir3.sh b/t/remake-subdir3.sh
index f1dbc54..eb2851d 100644
--- a/t/remake-subdir3.sh
+++ b/t/remake-subdir3.sh
@@ -37,8 +37,7 @@ $MAKE
do_check ()
{
- $MAKE >stdout || { cat stdout; exit 1; }
- cat stdout
+ run_make -O
test $(grep -c "/missing " stdout) -eq 1
}
diff --git a/t/self-check-shell-no-trail-bslash.sh
b/t/self-check-shell-no-trail-bslash.sh
index 905bb6d..14ee02c 100644
--- a/t/self-check-shell-no-trail-bslash.sh
+++ b/t/self-check-shell-no-trail-bslash.sh
@@ -39,8 +39,7 @@ test "$($SHELL -c 'echo is o\k')" = "is ok"
$MAKE good
-$MAKE bad SHELL="$SHELL" 2>stderr && { cat stderr >&2; exit 1; }
-cat stderr >&2
+run_make -E -e FAIL bad SHELL="$SHELL"
$FGREP "recipe ends with backslash character" stderr
:
diff --git a/t/silent-c.sh b/t/silent-c.sh
index 24af831..1614c22 100644
--- a/t/silent-c.sh
+++ b/t/silent-c.sh
@@ -64,8 +64,7 @@ for config_args in \
./configure --enable-silent-rules $config_args
- $MAKE >stdout || { cat stdout; exit 1; }
- cat stdout
+ run_make -O
$EGREP ' (-c|-o)' stdout && exit 1
grep 'mv ' stdout && exit 1
grep 'CC .*foo\.' stdout
@@ -78,8 +77,7 @@ for config_args in \
grep 'CCLD .*bla' stdout
$MAKE clean
- $MAKE V=1 >stdout || { cat stdout; exit 1; }
- cat stdout
+ run_make -O V=1
grep ' -c' stdout
grep ' -o foo' stdout
$EGREP '(CC|LD) ' stdout && exit 1
diff --git a/t/silent-custom.sh b/t/silent-custom.sh
index f5baa04..7ce3ffc 100644
--- a/t/silent-custom.sh
+++ b/t/silent-custom.sh
@@ -69,8 +69,7 @@ do_check ()
esac
shift
$MAKE clean
- $MAKE ${1+"$@"} >output 2>&1 || { cat output; exit 1; }
- sed 's/^/ /' output
+ run_make -M -- ${1+"$@"}
if $silent; then
$FGREP 'cp ' output && exit 1
$FGREP 'generate-header' output && exit 1
diff --git a/t/silent-cxx.sh b/t/silent-cxx.sh
index 0ab2aa2..00203c2 100644
--- a/t/silent-cxx.sh
+++ b/t/silent-cxx.sh
@@ -71,9 +71,10 @@ $FGREP am_cv_CXX_dependencies_compiler_type configure
for config_args in \
--enable-dependency-tracking --disable-dependency-tracking
do
+
./configure $config_args --enable-silent-rules
- $MAKE >stdout || { cat stdout; exit 1; }
- cat stdout
+
+ run_make -O
$EGREP ' (-c|-o)' stdout && exit 1
grep 'mv ' stdout && exit 1
@@ -90,8 +91,7 @@ do
# Ensure a clean rebuild.
$MAKE clean
- $MAKE V=1 >stdout || { cat stdout; exit 1; }
- cat stdout
+ run_make -O V=1
grep ' -c ' stdout
grep ' -o ' stdout
diff --git a/t/silent-f77.sh b/t/silent-f77.sh
index 8d608e6..8197292 100644
--- a/t/silent-f77.sh
+++ b/t/silent-f77.sh
@@ -58,8 +58,7 @@ $AUTOMAKE --add-missing
$AUTOCONF
./configure --enable-silent-rules
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
# Avoid spurious failures with SunStudio Fortran compilers.
sed '/^NOTICE:/d' stdout > t
mv -f t stdout
@@ -80,8 +79,7 @@ $EGREP '(FC|FCLD) ' stdout && exit 1
# Ensure a clean rebuild.
$MAKE clean
-$MAKE V=1 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=1
grep ' -c ' stdout
grep ' -o ' stdout
diff --git a/t/silent-f90.sh b/t/silent-f90.sh
index 41186c7..f319a1a 100644
--- a/t/silent-f90.sh
+++ b/t/silent-f90.sh
@@ -58,8 +58,7 @@ $AUTOMAKE --add-missing
$AUTOCONF
./configure --enable-silent-rules
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
# Avoid spurious failures with SunStudio Fortran compilers.
sed '/^NOTICE:/d' stdout > t
mv -f t stdout
@@ -80,8 +79,7 @@ $EGREP '(F77|F77LD) ' stdout && exit 1
# Ensure a clean rebuild.
$MAKE clean
-$MAKE V=1 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=1
grep ' -c ' stdout
grep ' -o ' stdout
diff --git a/t/silent-gen.sh b/t/silent-gen.sh
index 930dc58..ac49f2b 100644
--- a/t/silent-gen.sh
+++ b/t/silent-gen.sh
@@ -42,22 +42,19 @@ $AUTOCONF
# Silent rules are disabled by default, since we haven't called
# "AM_SILENT_RULES([yes])" explicitly.
./configure
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
grep 'GEN ' stdout && exit 1
grep 'cp ' stdout
grep 'echo ' stdout
$MAKE clean
-$MAKE V=1 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=1
grep 'GEN ' stdout && exit 1
grep 'cp ' stdout
grep 'echo ' stdout
$MAKE clean
-$MAKE V=0 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=0
grep 'GEN .*foo' stdout
grep 'cp ' stdout && exit 1
grep 'echo ' stdout && exit 1
@@ -65,22 +62,19 @@ grep 'echo ' stdout && exit 1
$MAKE distclean
./configure --enable-silent-rules
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
grep 'GEN .*foo' stdout
grep 'cp ' stdout && exit 1
grep 'echo ' stdout && exit 1
$MAKE clean
-$MAKE V=0 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=0
grep 'GEN .*foo' stdout
grep 'cp ' stdout && exit 1
grep 'echo ' stdout && exit 1
$MAKE clean
-$MAKE V=1 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=1
grep 'GEN ' stdout && exit 1
grep 'cp ' stdout
grep 'echo ' stdout
diff --git a/t/silent-lex.sh b/t/silent-lex.sh
index 018f8a7..fdafe94 100644
--- a/t/silent-lex.sh
+++ b/t/silent-lex.sh
@@ -74,8 +74,7 @@ $FGREP 'bar2-bar.c' sub/Makefile.in || exit 99
./configure --enable-silent-rules
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
$EGREP ' (-c|-o)' stdout && exit 1
$EGREP '(mv|ylwrap) ' stdout && exit 1
@@ -94,8 +93,7 @@ grep 'CCLD .*bar2' stdout
# different set of rules.
$MAKE clean
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
$EGREP ' (-c|-o)' stdout && exit 1
$EGREP '(mv|ylwrap) ' stdout && exit 1
@@ -112,8 +110,7 @@ grep 'CCLD .*bar2' stdout
$MAKE clean
rm -f *foo.c sub/*bar.c
-$MAKE V=1 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=1
grep ' -c ' stdout
grep ' -o ' stdout
@@ -126,8 +123,7 @@ $EGREP '(LEX|CC|CCLD) ' stdout && exit 1
# different set of rules.
$MAKE clean
-$MAKE V=1 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=1
# Don't look for ylwrap, as probably lex hasn't been re-run.
grep ' -c ' stdout
diff --git a/t/silent-lt.sh b/t/silent-lt.sh
index dc9bf2a..cfbaaab 100644
--- a/t/silent-lt.sh
+++ b/t/silent-lt.sh
@@ -67,8 +67,7 @@ for config_args in \
./configure --enable-silent-rules $config_args
- $MAKE >stdout || { cat stdout; exit 1; }
- cat stdout
+ run_make -O
$EGREP ' (-c|-o)' stdout && exit 1
grep 'mv ' stdout && exit 1
@@ -82,8 +81,7 @@ for config_args in \
grep ' CCLD .*bla' stdout
$MAKE clean
- $MAKE V=1 >stdout || { cat stdout; exit 1; }
- cat stdout
+ run_make -O V=1
grep ' -c' stdout
grep ' -o libfoo' stdout
# The libtool command line can contain e.g. a '--tag=CC' option.
diff --git a/t/silent-many-languages.sh b/t/silent-many-languages.sh
index bffbb6a..505de94 100644
--- a/t/silent-many-languages.sh
+++ b/t/silent-many-languages.sh
@@ -30,8 +30,7 @@ do_and_check_silent_build ()
*) rebuild=false;;
esac
- $MAKE >stdout || { cat stdout; exit 1; }
- cat stdout
+ run_make -O
# Avoid spurious failures with SunStudio Fortran compilers.
sed '/^NOTICE:/d' stdout > t
mv -f t stdout
@@ -74,8 +73,7 @@ do_and_check_verbose_build ()
*) rebuild=false;;
esac
- $MAKE V=1 >stdout || { cat stdout; exit 1; }
- cat stdout
+ run_make -O V=1
grep ' -c ' stdout
grep ' -o ' stdout
diff --git a/t/silent-nested-vars.sh b/t/silent-nested-vars.sh
index 7dca056..611965e 100644
--- a/t/silent-nested-vars.sh
+++ b/t/silent-nested-vars.sh
@@ -116,8 +116,7 @@ grep '^checking whether \./mymake supports nested
variables\.\.\. no *$' \
$EGREP 'CC|AM_V|GEN' Makefile # For debugging.
grep '^AM_V_CC = *\$(am__v_CC_0) *$' Makefile
grep '^AM_V_GEN = *\$(am__v_GEN_0) *$' Makefile
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
$EGREP ' (-c|-o)' stdout && exit 1
grep 'mv ' stdout && exit 1
grep 'echo .*oop' stdout && exit 1
@@ -136,8 +135,7 @@ $EGREP 'CC|AM_V|GEN' Makefile # For debugging.
grep '^AM_V_CC = *\$(am__v_CC_1) *$' Makefile
grep '^AM_V_GEN = *\$(am__v_GEN_1) *$' Makefile
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
grep ' -c' stdout
grep ' -o foo' stdout
grep ' -o bar' stdout
diff --git a/t/silent-texi.sh b/t/silent-texi.sh
index cbc6813..dc425a8 100644
--- a/t/silent-texi.sh
+++ b/t/silent-texi.sh
@@ -47,11 +47,7 @@ $AUTOCONF
./configure --disable-silent-rules
# Silent mode output.
-st=0
-$MAKE V=0 dvi html info ps pdf >stdout 2>stderr || st=$?
-cat stdout
-cat stderr >&2
-test $st -eq 0
+run_make -O -E -- V=0 dvi html info ps pdf
grep '^ DVIPS foo\.ps$' stdout
grep '^ MAKEINFO foo\.html$' stdout
# NetBSD make will print './foo.info' instead of 'foo.info'.
@@ -73,8 +69,7 @@ $EGREP '(zardoz|foo)\.log|3\.14|Copyright|This is|[Oo]utput '
\
# Verbose mode output.
$MAKE clean || exit 1
-$MAKE V=1 dvi html info ps pdf >output 2>&1 || { cat output; exit 1; }
-cat output
+run_make -M V=1 dvi html info ps pdf
$EGREP '(DVIPS|MAKEINFO|TEXI2(PDF|DVI)) ' output && exit 1
# Verbose output from TeX.
grep '[Oo]utput .*foo\.pdf' output
diff --git a/t/silent-yacc-headers.sh b/t/silent-yacc-headers.sh
index 87a8ec4..837b10e 100644
--- a/t/silent-yacc-headers.sh
+++ b/t/silent-yacc-headers.sh
@@ -60,8 +60,7 @@ $FGREP '$(bar_YFLAGS)' Makefile.in
./configure --enable-silent-rules
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
$EGREP ' (-c|-d|-o)' stdout && exit 1
$EGREP '(mv|ylwrap) ' stdout && exit 1
@@ -78,8 +77,7 @@ grep 'CCLD *bar' stdout
# Check recovering from header removal.
rm -f parse.h bar-parse.h
-$MAKE parse.h bar-parse.h >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O parse.h bar-parse.h
$EGREP ' (-c|-d|-o)' stdout && exit 1
$EGREP '(mv|ylwrap) ' stdout && exit 1
@@ -94,8 +92,7 @@ grep 'updating *bar-parse\.h' stdout
# different set of rules.
$MAKE clean
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
$EGREP ' (-c|-d|-o)' stdout && exit 1
$EGREP '(mv|ylwrap) ' stdout && exit 1
@@ -109,8 +106,7 @@ grep 'CCLD *bar' stdout
# Check recovering from header removal.
rm -f parse.h bar-parse.h
-$MAKE parse.h bar-parse.h >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O parse.h bar-parse.h
$EGREP ' (-c|-d|-o)' stdout && exit 1
$EGREP '(mv|ylwrap) ' stdout && exit 1
@@ -125,8 +121,7 @@ $MAKE maintainer-clean
./configure --enable-silent-rules
-$MAKE V=1 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=1
grep ' -c ' stdout
grep ' -o ' stdout
@@ -137,8 +132,7 @@ $EGREP '(YACC|CC|CCLD) ' stdout && exit 1
# Check recovering from header removal.
rm -f parse.h bar-parse.h
-$MAKE V=1 parse.h bar-parse.h >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=1 parse.h bar-parse.h
grep ' -d ' stdout
grep 'ylwrap ' stdout
@@ -150,8 +144,7 @@ grep 'YACC' stdout && exit 1
# different set of rules.
$MAKE clean
-$MAKE V=1 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=1
# Don't look for ylwrap, as probably lex hasn't been re-run.
grep ' -c ' stdout
@@ -161,8 +154,7 @@ $EGREP '(YACC|CC|CCLD) ' stdout && exit 1
# Check recovering from header removal.
rm -f parse.h bar-parse.h
-$MAKE V=1 parse.h bar-parse.h >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=1 parse.h bar-parse.h
grep ' -d ' stdout
grep 'ylwrap ' stdout
diff --git a/t/silent-yacc.sh b/t/silent-yacc.sh
index 5017d50..8344b65 100644
--- a/t/silent-yacc.sh
+++ b/t/silent-yacc.sh
@@ -70,8 +70,7 @@ $FGREP 'bar2-bar.c' sub/Makefile.in || exit 99
./configure --enable-silent-rules
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
$EGREP ' (-c|-o)' stdout && exit 1
$EGREP '(mv|ylwrap) ' stdout && exit 1
@@ -90,8 +89,7 @@ grep 'CCLD .*bar2' stdout
# different set of rules.
$MAKE clean
-$MAKE >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O
$EGREP ' (-c|-o)' stdout && exit 1
$EGREP '(mv|ylwrap) ' stdout && exit 1
@@ -108,8 +106,7 @@ grep 'CCLD .*bar2' stdout
$MAKE clean
rm -f *foo.[ch] sub/*bar.[ch]
-$MAKE V=1 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=1
grep ' -c ' stdout
grep ' -o ' stdout
@@ -122,8 +119,7 @@ $EGREP '(YACC|CC|CCLD) ' stdout && exit 1
# different set of rules.
$MAKE clean
-$MAKE V=1 >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O V=1
# Don't look for ylwrap, as probably lex hasn't been re-run.
grep ' -c ' stdout
diff --git a/t/subobj9.sh b/t/subobj9.sh
index 1f81e08..9fe4f7a 100644
--- a/t/subobj9.sh
+++ b/t/subobj9.sh
@@ -73,15 +73,13 @@ export AUTOCONF AUTOMAKE
# Opportunistically check that --tag=CXX is used when supported.
if ./libtool --help | grep tag=TAG; then
- $MAKE print >stdout || { cat stdout; exit 1; }
- cat stdout
+ run_make -O print
grep 'BEG1: .*--tag=CXX.*--mode=compile.* :1END' stdout
grep 'BEG2: .*--tag=CXX.*--mode=link.* :2END' stdout
fi
$MAKE
-$MAKE distcheck >output 2>&1 || { cat output; exit 1; }
-cat output
+run_make -M distcheck
# GNU Make used to complain that the Makefile contained two rules
# for 'src/.dirstamp' and './/src/.dirstamp'.
grep 'overriding commands' output && exit 1
diff --git a/t/tap-ambiguous-directive.sh b/t/tap-ambiguous-directive.sh
index 6804e67..500a483 100644
--- a/t/tap-ambiguous-directive.sh
+++ b/t/tap-ambiguous-directive.sh
@@ -32,9 +32,7 @@ ok 5 # SKIP SKIP
not ok 6 # TODO TODO
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=6 pass=2 fail=2 xpass=0 xfail=1 skip=1 error=0
cat > exp << 'END'
diff --git a/t/tap-bad-prog.tap b/t/tap-bad-prog.tap
index cf1f371..490cd4a 100644
--- a/t/tap-bad-prog.tap
+++ b/t/tap-bad-prog.tap
@@ -49,13 +49,8 @@ $AUTOMAKE
./configure
-if $MAKE check >stdout; then
- r='not ok'
-else
- r='ok'
-fi
-cat stdout
-result_ "$r" '"make check" returns non-zero exit status'
+command_ok_ '"make check" returns non-zero exit status' \
+ run_make -O -e FAIL check
# FIXME: maybe grep for stricter error messages in the next checks?
diff --git a/t/tap-bailout-suppress-badexit.sh
b/t/tap-bailout-suppress-badexit.sh
index 1a10b83..8f5fb15 100644
--- a/t/tap-bailout-suppress-badexit.sh
+++ b/t/tap-bailout-suppress-badexit.sh
@@ -54,10 +54,9 @@ END
chmod a+x $tests
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=4 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=4
+
for tst in $tests; do grep "^ERROR: $tst - Bail out!" stdout; done
$EGREP "ERROR: .*(exit.*status|terminat.*signal)" stdout && exit 1
diff --git a/t/tap-bailout-suppress-later-diagnostic.sh
b/t/tap-bailout-suppress-later-diagnostic.sh
index 3045e1d..730e461 100644
--- a/t/tap-bailout-suppress-later-diagnostic.sh
+++ b/t/tap-bailout-suppress-later-diagnostic.sh
@@ -32,11 +32,7 @@ Bail out!
# not seen
END
-# Doing the sums above, we have:
-
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=2 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=1
grep '# all.test: sanity check' stdout
grep 'not seen' stdout && exit 1
diff --git a/t/tap-basic.sh b/t/tap-basic.sh
index c146088..b2b01ba 100644
--- a/t/tap-basic.sh
+++ b/t/tap-basic.sh
@@ -80,9 +80,7 @@ $AUTOMAKE
# Basilar usage and testsuite progress output.
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=20 pass=4 fail=4 xpass=4 xfail=4 skip=4 error=0
test -f success.log
diff --git a/t/tap-deps.sh b/t/tap-deps.sh
index 8de51d3..a9446bf 100644
--- a/t/tap-deps.sh
+++ b/t/tap-deps.sh
@@ -62,9 +62,7 @@ END
chmod a+x *.test
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
-
+run_make -O check
count_test_results total=5 pass=5 fail=0 xpass=0 xfail=0 skip=0 error=0
cat > exp << 'END'
diff --git a/t/tap-diagnostic-custom.sh b/t/tap-diagnostic-custom.sh
index 978b526..d49e93f 100644
--- a/t/tap-diagnostic-custom.sh
+++ b/t/tap-diagnostic-custom.sh
@@ -81,13 +81,11 @@ $AUTOMAKE
./configure
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
count_test_results total=$i pass=$i fail=0 xpass=0 xfail=0 skip=0 error=0
cat later.mk >> Makefile
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
$FGREP 'blah blah' stdout && exit 1
:
diff --git a/t/tap-diagnostic.sh b/t/tap-diagnostic.sh
index 96b2a3d..23efdd4 100644
--- a/t/tap-diagnostic.sh
+++ b/t/tap-diagnostic.sh
@@ -52,14 +52,12 @@ PASS: all.test 4 - zardoz
# all.test: Shell metacharacters here: $metacharacters
END
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
$EGREP -i "#.*all\\.test|a comment|(Tests|Shell) " stdout && exit 1
count_test_results total=4 pass=2 fail=0 xpass=0 xfail=1 skip=1 error=0
echo 'AM_TEST_LOG_DRIVER_FLAGS = --comments' >> Makefile
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
$FGREP ' all.test' stdout > got
cat exp
cat got
@@ -86,8 +84,7 @@ ok
#TODO
END
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
count_test_results total=1 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=0
# Diagnostic without leading whitespace, or with extra leading whitespace,
@@ -107,8 +104,7 @@ ok 1
# ${tab} ${tab}${tab}foo bar${tab}baz ${tab}
END
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
count_test_results total=1 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=0
grep "^# all.test:${ws0p}foo$" stdout
diff --git a/t/tap-doc.sh b/t/tap-doc.sh
index ab5503a..ef2ab93 100644
--- a/t/tap-doc.sh
+++ b/t/tap-doc.sh
@@ -70,8 +70,7 @@ $AUTOMAKE -a
./configure
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
cat > exp <<'END'
PASS: foo.sh
diff --git a/t/tap-doc2.sh b/t/tap-doc2.sh
index 742ae5e..ddac739 100644
--- a/t/tap-doc2.sh
+++ b/t/tap-doc2.sh
@@ -83,8 +83,7 @@ case $MAKE in *\ -j*) skip_ "can't work easily with
concurrent make";; esac
# Prevent Sun Distributed Make from trying to run in parallel.
DMAKE_MODE=serial; export DMAKE_MODE
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
cat > exp <<'END'
PASS: foo.test 1 - Swallows fly
diff --git a/t/tap-empty-diagnostic.sh b/t/tap-empty-diagnostic.sh
index 4a6f2b1..68a51c1 100644
--- a/t/tap-empty-diagnostic.sh
+++ b/t/tap-empty-diagnostic.sh
@@ -30,8 +30,7 @@ ok 1$
# ${tab} $tab${tab}$
END
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
grep '^PASS:.*all\.test' stdout # Sanity check.
grep '#.*all\.test' stdout && exit 1
diff --git a/t/tap-empty.sh b/t/tap-empty.sh
index 7943f1d..ec1e909 100644
--- a/t/tap-empty.sh
+++ b/t/tap-empty.sh
@@ -45,8 +45,7 @@ END
for input in empty blank white white2; do
cp $input.test all.test
- $MAKE check >stdout && { cat stdout; exit 1; }
- cat stdout
+ run_make -O -e FAIL check
count_test_results total=1 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=1
grep '^ERROR: all\.test - missing test plan$' stdout
done
diff --git a/t/tap-escape-directive-2.sh b/t/tap-escape-directive-2.sh
index 135df29..63caafd 100644
--- a/t/tap-escape-directive-2.sh
+++ b/t/tap-escape-directive-2.sh
@@ -37,9 +37,7 @@ not ok \\\\\\\\\\# TODO
ok \\\\\\\\\\# SKIP
END
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
-
+run_make -O check
count_test_results total=8 pass=2 fail=0 xpass=0 xfail=3 skip=3 error=0
grep '^XFAIL: all\.test 1 .*# TODO' stdout
diff --git a/t/tap-escape-directive.sh b/t/tap-escape-directive.sh
index daf766c..feb95d3 100644
--- a/t/tap-escape-directive.sh
+++ b/t/tap-escape-directive.sh
@@ -27,9 +27,7 @@ ok \# TODO
ok \# SKIP
END
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
-
+run_make -O check
count_test_results total=2 pass=2 fail=0 xpass=0 xfail=0 skip=0 error=0
grep '^PASS: all\.test 1 .*# TODO' stdout
diff --git a/t/tap-exit.sh b/t/tap-exit.sh
index 9e0937d..95c194e 100644
--- a/t/tap-exit.sh
+++ b/t/tap-exit.sh
@@ -36,8 +36,7 @@ chmod a+x *.test
. tap-setup.sh
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=8 pass=4 fail=0 xpass=0 xfail=0 skip=0 error=4
grep '^ERROR: exit1\.test - exited with status 1$' stdout
@@ -46,8 +45,7 @@ grep '^ERROR: exit77\.test - exited with status 77$' stdout
grep '^ERROR: exit99\.test - exited with status 99$' stdout
echo TEST_LOG_DRIVER_FLAGS = --ignore-exit >> Makefile
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
count_test_results total=4 pass=4 fail=0 xpass=0 xfail=0 skip=0 error=0
:
diff --git a/t/tap-fancy.sh b/t/tap-fancy.sh
index 724dd1b..f6e8d4c 100644
--- a/t/tap-fancy.sh
+++ b/t/tap-fancy.sh
@@ -68,9 +68,7 @@ not ok!#TODO?
ok~#TODO
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=21 pass=6 fail=6 xfail=4 xpass=1 skip=4 error=0
#
@@ -91,9 +89,7 @@ ok $weirdchars # SKIP
Bail out! $weirdchars
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=6 pass=1 fail=1 xfail=1 xpass=1 skip=1 error=1
$FGREP "PASS: all.test 1 $weirdchars" stdout
$FGREP "FAIL: all.test 2 $weirdchars" stdout
@@ -118,10 +114,9 @@ ok # SKIP $bs
Bail out! $bs
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=6 pass=1 fail=1 xfail=1 xpass=1 skip=1 error=1
+
grep '^PASS: all\.test 1 \\$' stdout
grep '^FAIL: all\.test 2 \\$' stdout
grep '^XPASS: all\.test 3 # TODO \\$' stdout
diff --git a/t/tap-fancy2.sh b/t/tap-fancy2.sh
index 1e53c2b..c0742f1 100644
--- a/t/tap-fancy2.sh
+++ b/t/tap-fancy2.sh
@@ -125,8 +125,7 @@ total=$(($total + 3))
# And add the test plan!
echo 1..$total >> all.test
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
$EGREP '^(PASS|FAIL|SKIP).*#.*TODO' stdout && exit 1
$EGREP '^X?(PASS|FAIL).*#.*SKIP' stdout && exit 1
diff --git a/t/tap-log.sh b/t/tap-log.sh
index d7eab8a..d762ed7 100644
--- a/t/tap-log.sh
+++ b/t/tap-log.sh
@@ -132,8 +132,7 @@ test -f global.log
rm -f *.log
-VERBOSE=yes $MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check VERBOSE=yes
cat global.log
test ! -e my.log
test ! -e test-suite.log
diff --git a/t/tap-merge-stdout-stderr.sh b/t/tap-merge-stdout-stderr.sh
index 74f6f2e..26a16e8 100644
--- a/t/tap-merge-stdout-stderr.sh
+++ b/t/tap-merge-stdout-stderr.sh
@@ -40,10 +40,9 @@ echo "# foo foo foo" >&2
END
chmod a+x all.test
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
-
+run_make -O check
count_test_results total=4 pass=2 fail=0 xpass=0 xfail=1 skip=1 error=0
+
grep '^# all\.test: foo foo foo' stdout
cat > all.test <<END
@@ -53,9 +52,7 @@ echo ok 1
echo 'Bail out!' >&2
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=2 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=1
# See that the option '--no-merge' can override the effect of '--merge'.
@@ -63,6 +60,4 @@ count_test_results total=2 pass=1 fail=0 xpass=0 xfail=0
skip=0 error=1
run_make -O TEST_LOG_DRIVER_FLAGS=--no-merge check
count_test_results total=1 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=0
-
-
:
diff --git a/t/tap-missing-plan-and-bad-exit.sh
b/t/tap-missing-plan-and-bad-exit.sh
index 45b2413..b578e6a 100644
--- a/t/tap-missing-plan-and-bad-exit.sh
+++ b/t/tap-missing-plan-and-bad-exit.sh
@@ -32,8 +32,7 @@ chmod a+x foo.test
. tap-setup.sh
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=2 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=2
grep '^ERROR: foo\.test - exited with status 123$' stdout
diff --git a/t/tap-more2.sh b/t/tap-more2.sh
index ae15931..491399e 100644
--- a/t/tap-more2.sh
+++ b/t/tap-more2.sh
@@ -82,8 +82,7 @@ $AUTOMAKE
./configure
for target in check distcheck; do
- $MAKE $target >stdout || { cat stdout; exit 1; }
- cat stdout
+ run_make -O $target
count_test_results total=3 pass=1 fail=0 xpass=0 xfail=1 skip=1 error=0
done
diff --git a/t/tap-msg0-directive.sh b/t/tap-msg0-directive.sh
index a735153..5f06820 100644
--- a/t/tap-msg0-directive.sh
+++ b/t/tap-msg0-directive.sh
@@ -28,9 +28,7 @@ not ok 2 # TODO 0
ok 3 # SKIP 0
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=3 pass=0 fail=0 xpass=1 xfail=1 skip=1 error=0
grep '^XPASS: all\.test 1 # TODO 0$' stdout
diff --git a/t/tap-msg0-misc.sh b/t/tap-msg0-misc.sh
index e1f48a9..c5c7245 100644
--- a/t/tap-msg0-misc.sh
+++ b/t/tap-msg0-misc.sh
@@ -45,9 +45,7 @@ ok 14 0.0 # SKIP 0.0
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=14 pass=2 fail=0 xpass=4 xfail=4 skip=4 error=0
sed '/^ *$/d' > exp << 'END'
diff --git a/t/tap-msg0-result.sh b/t/tap-msg0-result.sh
index cdadd40..2e0263f 100644
--- a/t/tap-msg0-result.sh
+++ b/t/tap-msg0-result.sh
@@ -35,9 +35,7 @@ ok 9 0 # SKIP
ok - 0 # SKIP
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=10 pass=2 fail=2 xpass=2 xfail=2 skip=2 error=0
cat > exp << 'END'
diff --git a/t/tap-negative-numbers.sh b/t/tap-negative-numbers.sh
index 0a04fdb..efd17dc 100644
--- a/t/tap-negative-numbers.sh
+++ b/t/tap-negative-numbers.sh
@@ -33,9 +33,7 @@ ok -121
not ok -50000
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=7 pass=2 fail=2 xpass=1 xfail=1 skip=1 error=0
cat > exp <<'END'
diff --git a/t/tap-no-disable-hard-error.sh b/t/tap-no-disable-hard-error.sh
index 99b2f49..1a47b56 100644
--- a/t/tap-no-disable-hard-error.sh
+++ b/t/tap-no-disable-hard-error.sh
@@ -41,9 +41,7 @@ cat > noplan.test <<END
# nothing here
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=3 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=3
:
diff --git a/t/tap-no-merge-stdout-stderr.sh b/t/tap-no-merge-stdout-stderr.sh
index 4ce4869..1fc0da6 100644
--- a/t/tap-no-merge-stdout-stderr.sh
+++ b/t/tap-no-merge-stdout-stderr.sh
@@ -42,10 +42,9 @@ END
chmod a+x all.test
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
-
+run_make -O check
count_test_results total=2 pass=1 fail=0 xpass=0 xfail=0 skip=1 error=0
+
$FGREP 'foo foo foo' stdout
$FGREP 'bar bar bar' stdout && exit 1
diff --git a/t/tap-no-spurious-numbers.sh b/t/tap-no-spurious-numbers.sh
index 57c5ddc..95e9832 100644
--- a/t/tap-no-spurious-numbers.sh
+++ b/t/tap-no-spurious-numbers.sh
@@ -91,9 +91,7 @@ grep '#.*#' all.test \
test $(wc -l <all.test) -lt $highno \
|| framework_failure_ "creating all.test"
-$MAKE check >stdout || :
-cat stdout
-
+run_make -O -e IGNORE check
count_test_results total=$total pass=$pass fail=$fail skip=$skip \
xpass=$xpass xfail=$xfail error=$error
diff --git a/t/tap-no-spurious-summary.sh b/t/tap-no-spurious-summary.sh
index a3c3d71..1831ef3 100644
--- a/t/tap-no-spurious-summary.sh
+++ b/t/tap-no-spurious-summary.sh
@@ -34,9 +34,7 @@ cat > all.test <<'END'
ok 1
END
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
-
+run_make -O check
count_test_results total=1 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=0
for result in PASS FAIL XPASS XFAIL SKIP ERROR UNKNOWN; do
diff --git a/t/tap-no-spurious.sh b/t/tap-no-spurious.sh
index 8d45529..4d5e71c 100644
--- a/t/tap-no-spurious.sh
+++ b/t/tap-no-spurious.sh
@@ -105,9 +105,7 @@ cat all.test \
&& test $(grep -c '^not ok1$' all.test) -eq 1 \
|| framework_failure_ "creating all.test"
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
-
+run_make -O check
count_test_results total=5 pass=5 fail=0 xpass=0 xfail=0 skip=0 error=0
:
diff --git a/t/tap-not-ok-skip.sh b/t/tap-not-ok-skip.sh
index 4ad1d42..5d747ee 100644
--- a/t/tap-not-ok-skip.sh
+++ b/t/tap-not-ok-skip.sh
@@ -30,9 +30,7 @@ not ok - foo # SKIP
not ok 4 - bar # SKIP
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=4 pass=0 fail=4 skip=0 xpass=0 xfail=0 error=0
:
diff --git a/t/tap-number-wordboundary.sh b/t/tap-number-wordboundary.sh
index a8e9f1c..ef21f67 100644
--- a/t/tap-number-wordboundary.sh
+++ b/t/tap-number-wordboundary.sh
@@ -31,9 +31,7 @@ not ok 4?&%$ foo4 # TODO
ok 5"`!! foo5 # TODO
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=5 pass=1 fail=1 skip=1 xpass=1 xfail=1 error=0
$EGREP '^PASS: all\.test 1 ?: foo1$' stdout
@@ -49,9 +47,7 @@ not ok 1!
ok 476$ # SKIP
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=3 pass=0 fail=0 skip=0 xpass=0 xfail=0 error=3
$EGREP '^ERROR: all\.test 2 ?: quux # OUT-OF-ORDER \(expecting 1\)$' stdout
@@ -102,9 +98,7 @@ cat all.test
# Sanity check.
grep "^ok 1'$" all.test || framework_failure_ "creating all.test"
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
-
+run_make -O check
count_test_results total=$planned pass=$planned \
fail=0 skip=0 xpass=0 xfail=0 error=0
diff --git a/t/tap-numbers-leading-zero.sh b/t/tap-numbers-leading-zero.sh
index 32c252e..eeb2ee7 100644
--- a/t/tap-numbers-leading-zero.sh
+++ b/t/tap-numbers-leading-zero.sh
@@ -23,8 +23,7 @@
do_checks ()
{
- $MAKE check >stdout && { cat stdout; exit 1; }
- cat stdout
+ run_make -O -e FAIL check
count_test_results "$@"
# Allow some normalization of leading zeros, without forcing it.
LC_ALL=C sed -n 's/: all\.test 0*\([0-9]\)/: all.test \1/p' stdout > got
diff --git a/t/tap-numeric-description.sh b/t/tap-numeric-description.sh
index a007af5..a89edf9 100644
--- a/t/tap-numeric-description.sh
+++ b/t/tap-numeric-description.sh
@@ -53,9 +53,7 @@ XPASS: all.test 9 ${x9} # TODO
XPASS: all.test 10 - ${x10} # TODO
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=10 pass=2 fail=2 xpass=2 xfail=2 skip=2 error=0
$FGREP ': all.test' stdout > got
diff --git a/t/tap-plan-errors.sh b/t/tap-plan-errors.sh
index bc0d018..c49a190 100644
--- a/t/tap-plan-errors.sh
+++ b/t/tap-plan-errors.sh
@@ -32,8 +32,7 @@ my_check ()
cat > all.test
test -n "$err" || fatal_ "\$err not set before calling my_check"
cat all.test # For debugging.
- $MAKE check >stdout && { cat stdout; exit 1; }
- cat stdout
+ run_make -O -e FAIL check
count_test_results "$@"
grep "^ERROR: all\\.test $err$" stdout
unset err
diff --git a/t/tap-planskip-badexit.sh b/t/tap-planskip-badexit.sh
index d02d184..1336eac 100644
--- a/t/tap-planskip-badexit.sh
+++ b/t/tap-planskip-badexit.sh
@@ -38,8 +38,7 @@ END
chmod a+x one.test two.test
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
# The 'prove' utility reports both the skip and the non-zero exit status,
# so we do the same.
diff --git a/t/tap-planskip-bailout.sh b/t/tap-planskip-bailout.sh
index 655d1c9..0e6f7b1 100644
--- a/t/tap-planskip-bailout.sh
+++ b/t/tap-planskip-bailout.sh
@@ -27,8 +27,7 @@ cat > all.test <<END
Bail out!
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=2 pass=0 fail=0 xpass=0 xfail=0 skip=1 error=1
grep '^ERROR: all\.test - Bail out!' stdout
diff --git a/t/tap-planskip-later-errors.sh b/t/tap-planskip-later-errors.sh
index e924c13..f26c14b 100644
--- a/t/tap-planskip-later-errors.sh
+++ b/t/tap-planskip-later-errors.sh
@@ -30,9 +30,7 @@ a non-TAP line
1..1
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=4 pass=0 fail=0 xpass=0 xfail=0 skip=1 error=3
test $(grep -c '^ERROR: all\.test - multiple test plans' stdout) -eq 3
diff --git a/t/tap-planskip-unplanned.sh b/t/tap-planskip-unplanned.sh
index 07ed544..f48585c 100644
--- a/t/tap-planskip-unplanned.sh
+++ b/t/tap-planskip-unplanned.sh
@@ -27,8 +27,7 @@ cat > all.test <<END
ok 1
1..0 # SKIP too late
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=2 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=1
grep '^ERROR: all\.test - too many tests run (expected 0, got 1)$' stdout
@@ -38,8 +37,7 @@ ok 2 # SKIP
not ok 3 # TODO
1..0 # SKIP too late
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=4 pass=1 fail=0 xpass=0 xfail=1 skip=1 error=1
grep '^ERROR: all\.test - too many tests run (expected 0, got 3)$' stdout
@@ -47,8 +45,7 @@ cat > all.test <<END
1..0 # SKIP falsified later
ok 1
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=3 pass=0 fail=0 xpass=0 xfail=0 skip=1 error=2
grep '^ERROR: all\.test 1 # UNPLANNED$' stdout
grep '^ERROR: all\.test - too many tests run (expected 0, got 1)$' stdout
@@ -60,8 +57,7 @@ ok 2 # SKIP
not ok 3
not ok 4 # TODO
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=6 pass=0 fail=0 xpass=0 xfail=0 skip=1 error=5
grep '^ERROR: all\.test 1 # UNPLANNED$' stdout
grep '^ERROR: all\.test 2 # UNPLANNED$' stdout
diff --git a/t/tap-recheck.sh b/t/tap-recheck.sh
index 481f46c..4a8bbc4 100644
--- a/t/tap-recheck.sh
+++ b/t/tap-recheck.sh
@@ -85,13 +85,13 @@ $AUTOMAKE
do_recheck ()
{
case $* in
- --fail) on_bad_rc='&&';;
- --pass) on_bad_rc='||';;
+ --fail) status=FAIL;;
+ --pass) status=0;;
*) fatal_ "invalid usage of function 'do_recheck'";;
esac
rm -f *.run
- eval "\$MAKE recheck >stdout $on_bad_rc { cat stdout; ls -l; exit 1; }; :"
- cat stdout; ls -l
+ run_make -O -e $status recheck || { ls -l; exit 1; }
+ ls -l
}
for vpath in : false; do
@@ -119,8 +119,7 @@ for vpath in : false; do
count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0
: Run the tests for the first time.
- $MAKE check >stdout && { cat stdout; exit 1; }
- cat stdout
+ run_make -O -e FAIL check
ls -l
# All the test scripts should have run.
test -f a.run
diff --git a/t/tap-result-comment.sh b/t/tap-result-comment.sh
index 6c14506..0ca2d21 100644
--- a/t/tap-result-comment.sh
+++ b/t/tap-result-comment.sh
@@ -30,9 +30,7 @@ not ok # TOD${tab}
ok 5 # ${tab}${tab}TOOD${tab}${sp}${sp}
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
-
+run_make -O -e FAIL check
count_test_results total=5 pass=3 fail=2 xpass=0 xfail=0 skip=0 error=0
# Don't be too strict about trailing white space.
diff --git a/t/tap-signal.tap b/t/tap-signal.tap
index 2d49389..27e23ab 100644
--- a/t/tap-signal.tap
+++ b/t/tap-signal.tap
@@ -108,13 +108,12 @@ signal_caught ()
command_ok_ '"make check" fails' eval '
(
- st=0; $MAKE check >stdout || st=$?
- cat stdout
+ run_make -e IGNORE -O check
# Extra "echo" and silencing of xtraces required to avoid possible
# garbled output with NetBSD make, which would miss some final
# newlines in the expected places and thus mess up our TAP output.
set +x; echo
- test $st -gt 0
+ test $am_make_rc_got -gt 0
)
'
cat stdout # For debugging.
@@ -130,8 +129,7 @@ done
echo 'TEST_LOG_DRIVER_FLAGS = --ignore-exit' >> Makefile
-command_ok_ '"make check" passes [--ignore-exit]' eval '$MAKE check >stdout'
-cat stdout # For debugging.
+command_ok_ '"make check" passes [--ignore-exit]' run_make -O check
command_ok_ "count of test results [--ignore-exit]" count_test_results \
total=$results_count pass=$results_count \
diff --git a/t/tap-todo-skip-together.sh b/t/tap-todo-skip-together.sh
index c9a339e..a7d052c 100644
--- a/t/tap-todo-skip-together.sh
+++ b/t/tap-todo-skip-together.sh
@@ -28,9 +28,7 @@ ok 1 # SKIP TODO
not ok 2 # TODO SKIP
END
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
-
+run_make -O check
count_test_results total=2 pass=0 fail=0 xpass=0 xfail=1 skip=1 error=0
grep '^SKIP: all\.test 1 ' stdout
diff --git a/t/tap-todo-skip-whitespace.sh b/t/tap-todo-skip-whitespace.sh
index c4c47d9..55e4b8f 100644
--- a/t/tap-todo-skip-whitespace.sh
+++ b/t/tap-todo-skip-whitespace.sh
@@ -68,8 +68,8 @@ my_make_check ()
*) fatal_ "bad argument '$1' for my_make_check";;
esac
cat all.test
- $MAKE check >stdout || : # Don't care about the exit status in this test.
- cat stdout
+ # We don't care about the exit status in this test.
+ run_make -O -e IGNORE check
count_test_results total=15 pass=0 fail=0 error=0 \
xpass=$xpass xfail=$xfail skip=$skip
# Don't be too strict w.r.t. possible normalization of "TODO: foo" into
diff --git a/t/tap-todo-skip.sh b/t/tap-todo-skip.sh
index 7cbb170..4a68416 100644
--- a/t/tap-todo-skip.sh
+++ b/t/tap-todo-skip.sh
@@ -60,9 +60,7 @@ done; done; done; done; done >> all.test
cat all.test # For debugging.
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
-
+run_make -O check
count_test_results total=256 pass=0 fail=0 xpass=0 xfail=128 skip=128 error=0
# -------------------------------------------------------- #
@@ -82,9 +80,7 @@ ok 8 - SKIP
ok 9
END
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
-
+run_make -O check
count_test_results total=9 pass=9 fail=0 xpass=0 xfail=0 skip=0 error=0
:
diff --git a/t/tap-unplanned.sh b/t/tap-unplanned.sh
index b9d50c5..c6521b0 100644
--- a/t/tap-unplanned.sh
+++ b/t/tap-unplanned.sh
@@ -26,8 +26,7 @@ cat > all.test <<END
ok 1
ok 2
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=3 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=2
grep '^ERROR: all\.test - too many tests run (expected 1, got 2)$' stdout
grep '^ERROR: all\.test 2 # UNPLANNED$' stdout
@@ -38,8 +37,7 @@ ok 1
ok 2
ok 3
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=4 pass=2 fail=0 xpass=0 xfail=0 skip=0 error=2
grep '^ERROR: all\.test - too many tests run (expected 2, got 3)$' stdout
grep '^ERROR: all\.test 3 # UNPLANNED$' stdout
@@ -119,8 +117,7 @@ cat > t <<END
END
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
count_test_results total=22 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=21
echo 'PASS: all.test 1' > exp
@@ -145,8 +142,7 @@ for x in 'ok' 'ok 3' 'not ok' 'not ok # TODO' 'ok # TODO'
'ok # SKIP'; do
$x
1..2
END
- $MAKE check >stdout && { cat stdout; exit 1; }
- cat stdout
+ run_make -O -e FAIL check
test $($FGREP -c ': all.test' stdout) -eq 4
$EGREP '^PASS: all\.test 1($| )' stdout
$EGREP '^SKIP: all\.test 2($| )' stdout
diff --git a/t/tap-whitespace-normalization.sh
b/t/tap-whitespace-normalization.sh
index 8ed7328..65bc2fe 100644
--- a/t/tap-whitespace-normalization.sh
+++ b/t/tap-whitespace-normalization.sh
@@ -146,10 +146,9 @@ chmod a+x *.test
. tap-setup.sh
-# Don't care about exit status or number of test results, they should be
-# checked for in many other tests.
-$MAKE check >stdout || :
-cat stdout
+# We don't care about exit status or number of test results, they
+# should be checked for in many other tests.
+run_make -O -e FAIL check
LC_ALL=C sort exp > t
mv -f t exp
diff --git a/t/tap-with-and-without-number.sh b/t/tap-with-and-without-number.sh
index 87e4872..6b3b224 100644
--- a/t/tap-with-and-without-number.sh
+++ b/t/tap-with-and-without-number.sh
@@ -34,8 +34,7 @@ ok 6 # SKIP
ok zardoz
END
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
count_test_results total=7 pass=4 fail=0 xpass=0 xfail=2 skip=1 error=0
grep '^PASS: all\.test 1 foo$' stdout
diff --git a/t/test-driver-acsubst.sh b/t/test-driver-acsubst.sh
index 2e70dfd..85113a4 100644
--- a/t/test-driver-acsubst.sh
+++ b/t/test-driver-acsubst.sh
@@ -75,13 +75,12 @@ END
chmod a+x foo bar.test baz.sh
$MAKE check-autodefs
-st=0; $MAKE check >stdout || st=$?
-cat stdout
+run_make -O -e IGNORE check
cat test-suite.log
cat foo.log
cat bar.log
cat baz.log
-test $st -eq 0 || exit 1
+test $am_make_rc_got -eq 0
count_test_results total=3 pass=1 fail=0 skip=1 xfail=1 xpass=0 error=0
:
diff --git a/t/test-driver-custom-multitest-recheck.sh
b/t/test-driver-custom-multitest-recheck.sh
index 148553f..f814ee5 100644
--- a/t/test-driver-custom-multitest-recheck.sh
+++ b/t/test-driver-custom-multitest-recheck.sh
@@ -86,13 +86,13 @@ $AUTOMAKE
do_recheck ()
{
case $* in
- --fail) on_bad_rc='&&';;
- --pass) on_bad_rc='||';;
+ --fail) status=FAIL;;
+ --pass) status=0;;
*) fatal_ "invalid usage of function 'do_recheck'";;
esac
rm -f *.run
- eval "\$MAKE recheck >stdout $on_bad_rc { cat stdout; ls -l; exit 1; }; :"
- cat stdout; ls -l
+ run_make -O -e $status recheck || { ls -l; exit 1; }
+ ls -l
}
for vpath in : false; do
@@ -121,8 +121,7 @@ for vpath in : false; do
count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0
: Run the tests for the first time.
- $MAKE check >stdout && { cat stdout; exit 1; }
- cat stdout
+ run_make -O -e FAIL check
ls -l
# All the test scripts should have run.
test -f a.run
diff --git a/t/test-driver-custom-multitest.sh
b/t/test-driver-custom-multitest.sh
index 868eab0..2908a23 100644
--- a/t/test-driver-custom-multitest.sh
+++ b/t/test-driver-custom-multitest.sh
@@ -119,8 +119,7 @@ for vpath in : false; do
$srcdir/configure
- $MAKE check >stdout && { cat stdout; cat test-suite.log; exit 1; }
- cat stdout
+ run_make -O -e FAIL check || { cat test-suite.log; exit 1; }
cat test-suite.log
# Couple of sanity checks. These might need to be updated if the
# 'trivial-test-driver' script is changed.
diff --git a/t/test-driver-custom-xfail-tests.sh
b/t/test-driver-custom-xfail-tests.sh
index 6ecb896..a7828c0 100644
--- a/t/test-driver-custom-xfail-tests.sh
+++ b/t/test-driver-custom-xfail-tests.sh
@@ -141,8 +141,7 @@ $AUTOMAKE
./configure
-$MAKE check >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O check
test $(grep -c '^PASS:' stdout) -eq 3
test $(grep -c '^XFAIL:' stdout) -eq 13
@@ -150,8 +149,7 @@ for dir in sub1 sub2; do
cd $dir
cp pass.test x1.test
cp x2.test pass.test
- $MAKE check >stdout && { cat stdout; exit 1; }
- cat stdout
+ run_make -O -e FAIL check
test "$(cat pass.trs)" = ":test-result: FAIL"
test "$(cat x1.trs)" = ":test-result: XPASS"
test "$(cat x2.trs)" = ":test-result: XFAIL"
diff --git a/t/test-log.sh b/t/test-log.sh
index f0da927..fd54d6a 100644
--- a/t/test-log.sh
+++ b/t/test-log.sh
@@ -146,8 +146,7 @@ test -f global.log
rm -f *.log
-VERBOSE=yes $MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check VERBOSE=yes
cat global.log
test ! -e my.log
test ! -e test-suite.log
diff --git a/t/test-metadata-results.sh b/t/test-metadata-results.sh
index f0a19dc..9fc065e 100644
--- a/t/test-metadata-results.sh
+++ b/t/test-metadata-results.sh
@@ -49,15 +49,17 @@ chmod a+x dummy-driver
mk_check ()
{
- st=0
- $MAKE check >stdout || st=$?
- cat stdout
+ stat=0
+ case $1 in
+ -e) stat=$2; shift 2;;
+ esac
+ run_make -O -e $stat -- check
# Our dummy driver make no testsuite progress report.
grep ': .*\.test' stdout && exit 1
# Nor it writes to the log files.
test -s foo.log && exit 1
test -s bar.log && exit 1
- return $st
+ : For 'set -e'.
}
# This must be different from the one defined in 'test/defs', as that
@@ -99,7 +101,7 @@ cat > bar.test <<END
:test-result: SKIP
:test-global-result: ERROR
END
-mk_check && exit 1
+mk_check -e FAIL
count_test_results total=2 pass=0 fail=1 xpass=0 xfail=0 skip=1 error=0
cat > foo.test <<END
@@ -118,7 +120,7 @@ END
cat > bar.test <<END
:test-global-result: PASS
END
-mk_check && exit 1
+mk_check -e FAIL
count_test_results total=1 pass=0 fail=1 xpass=0 xfail=0 skip=0 error=0
cat > foo.test <<END
@@ -147,11 +149,11 @@ cat > foo.test <<END
:test-result: ERROR
END
: > bar.test
-mk_check && exit 1
+mk_check -e FAIL
count_test_results total=6 pass=1 fail=1 xpass=1 xfail=1 skip=1 error=1
cp foo.test bar.test
-mk_check && exit 1
+mk_check -e FAIL
count_test_results total=12 pass=2 fail=2 xpass=2 xfail=2 skip=2 error=2
# Check that we are liberal w.r.t. whitespace use.
@@ -169,7 +171,7 @@ END
done
cat foo.test # For debugging.
cat bar.test # Likewise.
-mk_check && exit 1
+mk_check -e FAIL
count_test_results total=30 pass=5 fail=5 xpass=5 xfail=5 skip=5 error=5
:
diff --git a/t/test-missing.sh b/t/test-missing.sh
index a58817f..1c7df04 100644
--- a/t/test-missing.sh
+++ b/t/test-missing.sh
@@ -37,8 +37,7 @@ $AUTOMAKE -a
./configure
-$MAKE check >output 2>&1 && { cat output; exit 1; }
-cat output
+run_make -e FAIL -M check
test -f ok.log
grep '^PASS: ok\.test' output
$FGREP 'zardoz.log' output
@@ -59,8 +58,7 @@ test ! -e test-suite.log
$MAKE check
rm -f zardoz.test
-$MAKE check >output 2>&1 && { cat output; exit 1; }
-cat output
+run_make -M -e FAIL check
$FGREP 'zardoz.log' output
test ! -e test-suite.log
diff --git a/t/test-missing2.sh b/t/test-missing2.sh
index 2c0e547..9bc2812 100644
--- a/t/test-missing2.sh
+++ b/t/test-missing2.sh
@@ -42,8 +42,7 @@ test ! -e foobar1.trs || exit 99
test ! -e foobar2.log || exit 99
test ! -e foobar2.trs || exit 99
-$MAKE check >output 2>&1 && { cat output; exit 1; }
-cat output
+run_make -e FAIL -M check
grep 'test-suite\.log.*foobar1\.log' output
grep 'test-suite\.log.*foobar1\.trs' output
grep 'test-suite\.log.*foobar2\.log' output
diff --git a/t/test-trs-recover.sh b/t/test-trs-recover.sh
index 7b5efdc..4585788 100644
--- a/t/test-trs-recover.sh
+++ b/t/test-trs-recover.sh
@@ -65,8 +65,7 @@ test ! -e baz.trs
: Recreate by hand, with a failing test.
rm -f foo.trs bar.trs
-TEST_STATUS=1 $MAKE bar.trs baz.trs >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O TEST_STATUS=1 bar.trs baz.trs
test ! -e foo.trs
test -f bar.trs
test -f baz.trs
@@ -86,7 +85,7 @@ is_newest baz.trs stamp
: ensure that also up-to-date '.trs' files are remade -- this time we
: grep the "make check" output verify that.
rm -f foo.trs bar.trs
-TEST_STATUS=1 $MAKE check >stdout && { cat stdout; exit 1; }
+run_make -O -e FAIL TEST_STATUS=1 check
test -f foo.trs
test -f bar.trs
grep '^FAIL: foo\.test' stdout
@@ -109,8 +108,7 @@ test ! -e baz.trs
: Interactions with "make recheck" are OK.
rm -f foo.trs bar.trs baz.log baz.trs
-$MAKE recheck >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O recheck
test -f foo.trs
test -f bar.trs
test ! -e baz.trs
@@ -130,8 +128,7 @@ test -f baz.trs
: '.trs' files are *not* remade.
update_stamp
rm -f foo.trs bar.trs test-suite.log
-$MAKE test-suite.log >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O test-suite.log
grep '^PASS: foo\.test' stdout
grep '^PASS: bar\.test' stdout
grep 'baz\.test' stdout && exit 1
diff --git a/t/test-trs-recover2.sh b/t/test-trs-recover2.sh
index b26b0e7..f996a5c 100644
--- a/t/test-trs-recover2.sh
+++ b/t/test-trs-recover2.sh
@@ -69,8 +69,7 @@ test -r bar.trs
: Again, but using "make recheck" this time.
rm -f foo.trs
chmod a-r bar.trs
-$MAKE recheck >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O recheck
test -f foo.trs
test -r foo.trs
test -f bar.trs
@@ -81,8 +80,7 @@ grep '^PASS: bar\.test' stdout
: Recreate by remaking the global test log.
chmod a-r foo.trs
rm -f test-suite.log
-$MAKE test-suite.log >stdout || { cat stdout; exit 1; }
-cat stdout
+run_make -O test-suite.log
test -f foo.trs
test -r foo.trs
grep '^PASS: foo\.test' stdout
diff --git a/t/testsuite-summary-count-many.sh
b/t/testsuite-summary-count-many.sh
index 8bb34f3..094b937 100644
--- a/t/testsuite-summary-count-many.sh
+++ b/t/testsuite-summary-count-many.sh
@@ -91,7 +91,7 @@ $AUTOCONF
./configure
-($MAKE check || : > make.fail) | tee stdout
+($MAKE check || touch make.fail) | tee stdout
test -f make.fail
$PERL extract-testsuite-summary.pl stdout > summary.got
diff --git a/t/testsuite-summary-reference-log.sh
b/t/testsuite-summary-reference-log.sh
index 9418c0d..379f42b 100644
--- a/t/testsuite-summary-reference-log.sh
+++ b/t/testsuite-summary-reference-log.sh
@@ -45,8 +45,7 @@ cd build
../configure
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
grep '^See \./my_test_suite\.log$' stdout
mkdir bar
@@ -70,12 +69,10 @@ $AUTOCONF --force
$AUTOMAKE
./configure
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
grep '^See sub/test-suite\.log$' stdout
cd sub
-$MAKE check >stdout && { cat stdout; exit 1; }
-cat stdout
+run_make -O -e FAIL check
grep '^See sub/test-suite\.log$' stdout
cd ..
--
1.8.3.rc2
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [FYI] {micro} tests: avoid '$MAKE' redirections, use 'run_make' instead,
Stefano Lattarini <=