==========================================
   GNU Automake 1.16b: ./test-suite.log
==========================================

# TOTAL: 1
# PASS:  0
# SKIP:  0
# XFAIL: 0
# FAIL:  1
# XPASS: 0
# ERROR: 0

.. contents:: :depth: 2

FAIL: t/txinfo-no-clutter
=========================

txinfo-no-clutter: running makeinfo --version
texi2any (GNU texinfo) 6.7dev

Copyright (C) 2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
txinfo-no-clutter: running texi2dvi --version
texi2dvi (GNU Texinfo 6.7dev)

Copyright (C) 2019 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
txinfo-no-clutter: running dvips --version
This is dvips(k) 5.997 Copyright 2017 Radical Eye Software
kpathsea version 6.2.3
Copyright 2017 Radical Eye Software.
There is NO warranty.  You may redistribute this software
under the terms of the GNU General Public License
and the Dvips copyright.
For more information about these matters, see the files
named COPYING and dvips.h.
Primary author of Dvips: T. Rokicki.
Running from installcheck: no
Test Protocol: none
PATH = /home/g/src/automake-GIT/automake/bin:/home/g/src/automake-GIT/automake/t/ax:/home/g/go/bin:/home/g/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/usr/local/go/bin:/home/g/.emacs.d/bin/doom
++ pwd
/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir
+ cat
+ cat
+ mkdir sub doc
+ cat
+ cat
+ cat
+ cat
+ cp baz.texi sub
+ aclocal-1.16 -Werror
+ automake-1.16 --foreign -Werror -Wall --add-missing
Makefile.am:2: installing './mdate-sh'
Makefile.am:2: installing './texinfo.tex'
sub/Makefile.am:2: installing 'sub/texinfo.tex'
+ autoconf
+ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating sub/Makefile
+ for fmt in info pdf ps dvi html all
+ make -j5 info
Making info in sub
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \
  for f in baz.info baz.info-[0-9] baz.info-[0-9][0-9] baz.i[0-9] baz.i[0-9][0-9]; do \
    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
  done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I . \
 -o baz.info baz.texi; \
then \
  rc=0; \
  CDPATH="${ZSH_VERSION+.}:" && cd .; \
else \
  rc=$?; \
  CDPATH="${ZSH_VERSION+.}:" && cd . && \
  $restore $backupdir/* `echo "./baz.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \
  for f in baz.info baz.info-[0-9] baz.info-[0-9][0-9] baz.i[0-9] baz.i[0-9][0-9]; do \
    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
  done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I . \
 -o baz.info baz.texi; \
then \
  rc=0; \
  CDPATH="${ZSH_VERSION+.}:" && cd .; \
else \
  rc=$?; \
  CDPATH="${ZSH_VERSION+.}:" && cd . && \
  $restore $backupdir/* `echo "./baz.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
Updating ./version.texi
Updating ./doc/version2.texi
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \
  for f in foo.info foo.info-[0-9] foo.info-[0-9][0-9] foo.i[0-9] foo.i[0-9][0-9]; do \
    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
  done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I . \
 -o foo.info foo.texi; \
then \
  rc=0; \
  CDPATH="${ZSH_VERSION+.}:" && cd .; \
else \
  rc=$?; \
  CDPATH="${ZSH_VERSION+.}:" && cd . && \
  $restore $backupdir/* `echo "./foo.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \
  for f in doc/bar.info doc/bar.info-[0-9] doc/bar.info-[0-9][0-9] doc/bar.i[0-9] doc/bar.i[0-9][0-9]; do \
    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
  done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I doc -I ./doc \
 -o doc/bar.info ./doc/bar.texi; \
then \
  rc=0; \
  CDPATH="${ZSH_VERSION+.}:" && cd .; \
else \
  rc=$?; \
  CDPATH="${ZSH_VERSION+.}:" && cd . && \
  $restore $backupdir/* `echo "./doc/bar.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
+ ls -l . doc sub
.:
total 352
-rw-rw-r-- 1 g g  27212 Nov 15 18:05 aclocal.m4
drwxr-xr-x 2 g g   4096 Nov 15 18:05 autom4te.cache
-rw-rw-r-- 1 g g    226 Nov 15 18:05 baz.info
-rw-rw-r-- 1 g g    197 Nov 15 18:05 baz.texi
-rwxrwxr-x 1 g g   7400 Nov 15 18:05 compile
-rw-rw-r-- 1 g g   5411 Nov 15 18:05 config.log
-rwxrwxr-x 1 g g  25438 Nov 15 18:05 config.status
-rwxrwxr-x 1 g g 105659 Nov 15 18:05 configure
-rw-rw-r-- 1 g g    123 Nov 15 18:05 configure.ac
-rwxrwxr-x 1 g g  23568 Nov 15 18:05 depcomp
drwxrwxr-x 2 g g   4096 Nov 15 18:05 doc
-rw-rw-r-- 1 g g    207 Nov 15 18:05 foo.info
-rw-rw-r-- 1 g g    101 Nov 15 18:05 foo.texi
-rwxrwxr-x 1 g g  15358 Nov 15 18:05 install-sh
-rw-rw-r-- 1 g g  41057 Nov 15 18:05 Makefile
-rw-rw-r-- 1 g g    112 Nov 15 18:05 Makefile.am
-rw-rw-r-- 1 g g  40226 Nov 15 18:05 Makefile.in
lrwxrwxrwx 1 g g     46 Nov 15 18:05 mdate-sh -> /home/g/src/automake-GIT/automake/lib/mdate-sh
-rwxrwxr-x 1 g g   6878 Nov 15 18:05 missing
-rw-rw-r-- 1 g g     97 Nov 15 18:05 stamp-vti
drwxrwxr-x 2 g g   4096 Nov 15 18:05 sub
lrwxrwxrwx 1 g g     49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex
-rw-rw-r-- 1 g g     97 Nov 15 18:05 version.texi

doc:
total 16
-rw-rw-r-- 1 g g 207 Nov 15 18:05 bar.info
-rw-rw-r-- 1 g g 102 Nov 15 18:05 bar.texi
-rw-rw-r-- 1 g g  97 Nov 15 18:05 stamp-1
-rw-rw-r-- 1 g g  97 Nov 15 18:05 version2.texi

sub:
total 60
-rw-rw-r-- 1 g g   226 Nov 15 18:05 baz.info
-rw-rw-r-- 1 g g   197 Nov 15 18:05 baz.texi
-rw-rw-r-- 1 g g 23324 Nov 15 18:05 Makefile
-rw-rw-r-- 1 g g    76 Nov 15 18:05 Makefile.am
-rw-rw-r-- 1 g g 22476 Nov 15 18:05 Makefile.in
lrwxrwxrwx 1 g g    49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex
+ case $fmt in
+ test -f foo.info
+ test -f doc/bar.info
+ test -f baz.info
+ test -f sub/baz.info
+ ls -d foo.info foo.texi baz.info baz.texi sub/baz.info sub/baz.texi doc/bar.info doc/bar.texi
+ basename_rx='(foo|doc/bar|baz|sub/baz)'
+ case $fmt in
+ extension_rx='(texi|info)'
+ /bin/grep -E -v '^(foo|doc/bar|baz|sub/baz)\.(texi|info)$' lst
+ case $fmt in
+ rm -f baz.info foo.info doc/bar.info sub/baz.info
+ for fmt in info pdf ps dvi html all
+ make -j5 pdf
Making pdf in sub
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi --pdf --batch  --build-dir=baz.t2p -o baz.pdf  \
baz.texi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on baz.pdf (1 page, 14745 bytes).
Transcript written on baz.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on baz.pdf (1 page, 14745 bytes).
Transcript written on baz.log.
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi --pdf --batch  --build-dir=foo.t2p -o foo.pdf  \
foo.texi
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I doc -I ./doc' \
texi2dvi --pdf --batch  --build-dir=doc/bar.t2p -o doc/bar.pdf  \
`test -f 'doc/bar.texi' || echo './'`doc/bar.texi
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi --pdf --batch  --build-dir=baz.t2p -o baz.pdf  \
baz.texi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
entering extended mode

(../../../.././foo.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts,entering extended mode

(../../../../.././doc/bar.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: markup, glyphs, pdf,
page headings, tables, fonts, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) formatting, localization, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/version.texi)
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on foo.pdf (1 page, 14745 bytes).
Transcript written on foo.log.
 formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/doc/version2.texi)
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on bar.pdf (1 page, 14745 bytes).
Transcript written on bar.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on baz.pdf (1 page, 14745 bytes).
Transcript written on baz.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on baz.pdf (1 page, 14745 bytes).
Transcript written on baz.log.
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
+ ls -l . doc sub
.:
total 388
-rw-rw-r-- 1 g g  27212 Nov 15 18:05 aclocal.m4
drwxr-xr-x 2 g g   4096 Nov 15 18:05 autom4te.cache
-rw-rw-r-- 1 g g  14745 Nov 15 18:05 baz.pdf
drwxrwxr-x 3 g g   4096 Nov 15 18:05 baz.t2p
-rw-rw-r-- 1 g g    197 Nov 15 18:05 baz.texi
-rwxrwxr-x 1 g g   7400 Nov 15 18:05 compile
-rw-rw-r-- 1 g g   5411 Nov 15 18:05 config.log
-rwxrwxr-x 1 g g  25438 Nov 15 18:05 config.status
-rwxrwxr-x 1 g g 105659 Nov 15 18:05 configure
-rw-rw-r-- 1 g g    123 Nov 15 18:05 configure.ac
-rwxrwxr-x 1 g g  23568 Nov 15 18:05 depcomp
drwxrwxr-x 3 g g   4096 Nov 15 18:05 doc
-rw-rw-r-- 1 g g  14745 Nov 15 18:05 foo.pdf
drwxrwxr-x 3 g g   4096 Nov 15 18:05 foo.t2p
-rw-rw-r-- 1 g g    101 Nov 15 18:05 foo.texi
-rwxrwxr-x 1 g g  15358 Nov 15 18:05 install-sh
-rw-rw-r-- 1 g g     88 Nov 15 18:05 lst
-rw-rw-r-- 1 g g  41057 Nov 15 18:05 Makefile
-rw-rw-r-- 1 g g    112 Nov 15 18:05 Makefile.am
-rw-rw-r-- 1 g g  40226 Nov 15 18:05 Makefile.in
lrwxrwxrwx 1 g g     46 Nov 15 18:05 mdate-sh -> /home/g/src/automake-GIT/automake/lib/mdate-sh
-rwxrwxr-x 1 g g   6878 Nov 15 18:05 missing
-rw-rw-r-- 1 g g     97 Nov 15 18:05 stamp-vti
drwxrwxr-x 3 g g   4096 Nov 15 18:05 sub
lrwxrwxrwx 1 g g     49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex
-rw-rw-r-- 1 g g     97 Nov 15 18:05 version.texi

doc:
total 32
-rw-rw-r-- 1 g g 14745 Nov 15 18:05 bar.pdf
drwxrwxr-x 3 g g  4096 Nov 15 18:05 bar.t2p
-rw-rw-r-- 1 g g   102 Nov 15 18:05 bar.texi
-rw-rw-r-- 1 g g    97 Nov 15 18:05 stamp-1
-rw-rw-r-- 1 g g    97 Nov 15 18:05 version2.texi

sub:
total 76
-rw-rw-r-- 1 g g 14745 Nov 15 18:05 baz.pdf
drwxrwxr-x 3 g g  4096 Nov 15 18:05 baz.t2p
-rw-rw-r-- 1 g g   197 Nov 15 18:05 baz.texi
-rw-rw-r-- 1 g g 23324 Nov 15 18:05 Makefile
-rw-rw-r-- 1 g g    76 Nov 15 18:05 Makefile.am
-rw-rw-r-- 1 g g 22476 Nov 15 18:05 Makefile.in
lrwxrwxrwx 1 g g    49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex
+ case $fmt in
+ test -f foo.pdf
+ test -f doc/bar.pdf
+ test -f baz.pdf
+ test -f sub/baz.pdf
+ ls -d foo.pdf foo.t2p foo.texi baz.pdf baz.t2p baz.texi sub/baz.pdf sub/baz.t2p sub/baz.texi doc/bar.pdf doc/bar.t2p doc/bar.texi
+ basename_rx='(foo|doc/bar|baz|sub/baz)'
+ case $fmt in
+ extension_rx='(texi|pdf|t2p)'
+ /bin/grep -E -v '^(foo|doc/bar|baz|sub/baz)\.(texi|pdf|t2p)$' lst
+ case $fmt in
+ make -j5 clean
Making clean in sub
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
test -z "baz.dvi baz.pdf baz.ps baz.html" \
|| rm -rf baz.dvi baz.pdf baz.ps baz.html
rm -rf baz.t2d baz.t2p
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
test -z "foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \
  doc/bar.html baz.dvi baz.pdf baz.ps baz.html" \
|| rm -rf foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \
  doc/bar.html baz.dvi baz.pdf baz.ps baz.html
rm -f 1.tmp* ./doc/version2.texi.tmp*
rm -rf foo.t2d foo.t2p doc/bar.t2d doc/bar.t2p baz.t2d baz.t2p
rm -f vti.tmp* ./version.texi.tmp*
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
+ for fmt in info pdf ps dvi html all
+ make -j5 ps
Making ps in sub
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi  --build-dir=baz.t2d -o baz.dvi  \
baz.texi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
TEXINPUTS=".:$TEXINPUTS" \
dvips  -o baz.ps baz.dvi
This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com)
' TeX output 2020.11.15:1805' -> baz.ps
</usr/share/texlive/texmf-dist/dvips/base/tex.pro>
</usr/share/texlive/texmf-dist/dvips/base/texps.pro>. 
</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] 
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi  --build-dir=foo.t2d -o foo.dvi  \
foo.texi
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I doc -I ./doc' \
texi2dvi  --build-dir=doc/bar.t2d -o doc/bar.dvi  \
`test -f 'doc/bar.texi' || echo './'`doc/bar.texi
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi  --build-dir=baz.t2d -o baz.dvi  \
baz.texi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././foo.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/version.texi)
[1] )
Output written on foo.dvi (1 page, 256 bytes).
Transcript written on foo.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc,entering extended mode

(../../../../.././doc/bar.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: environments,
defuns, pdf, macros, fonts, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, formatting, and turning on texinfo input format. toc, environments,)
defuns, macros,
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
TEXINPUTS=".:$TEXINPUTS" \
dvips  -o foo.ps foo.dvi
 cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/doc/version2.texi)
[1] )
Output written on bar.dvi (1 page, 256 bytes).
Transcript written on bar.log.
This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com)
' TeX output 2020.11.15:1805' -> foo.ps
</usr/share/texlive/texmf-dist/dvips/base/tex.pro>
</usr/share/texlive/texmf-dist/dvips/base/texps.pro>. 
</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] 
TEXINPUTS=".:$TEXINPUTS" \
dvips  -o doc/bar.ps doc/bar.dvi
This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com)
' TeX output 2020.11.15:1805' -> doc/bar.ps
</usr/share/texlive/texmf-dist/dvips/base/tex.pro>
</usr/share/texlive/texmf-dist/dvips/base/texps.pro>. 
</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] 
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
TEXINPUTS=".:$TEXINPUTS" \
dvips  -o baz.ps baz.dvi
This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com)
' TeX output 2020.11.15:1805' -> baz.ps
</usr/share/texlive/texmf-dist/dvips/base/tex.pro>
</usr/share/texlive/texmf-dist/dvips/base/texps.pro>. 
</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] 
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
+ ls -l . doc sub
.:
total 420
-rw-rw-r-- 1 g g  27212 Nov 15 18:05 aclocal.m4
drwxr-xr-x 2 g g   4096 Nov 15 18:05 autom4te.cache
-rw-rw-r-- 1 g g    256 Nov 15 18:05 baz.dvi
-rw-rw-r-- 1 g g  27813 Nov 15 18:05 baz.ps
drwxrwxr-x 3 g g   4096 Nov 15 18:05 baz.t2d
-rw-rw-r-- 1 g g    197 Nov 15 18:05 baz.texi
-rwxrwxr-x 1 g g   7400 Nov 15 18:05 compile
-rw-rw-r-- 1 g g   5411 Nov 15 18:05 config.log
-rwxrwxr-x 1 g g  25438 Nov 15 18:05 config.status
-rwxrwxr-x 1 g g 105659 Nov 15 18:05 configure
-rw-rw-r-- 1 g g    123 Nov 15 18:05 configure.ac
-rwxrwxr-x 1 g g  23568 Nov 15 18:05 depcomp
drwxrwxr-x 3 g g   4096 Nov 15 18:05 doc
-rw-rw-r-- 1 g g    256 Nov 15 18:05 foo.dvi
-rw-rw-r-- 1 g g  27813 Nov 15 18:05 foo.ps
drwxrwxr-x 3 g g   4096 Nov 15 18:05 foo.t2d
-rw-rw-r-- 1 g g    101 Nov 15 18:05 foo.texi
-rwxrwxr-x 1 g g  15358 Nov 15 18:05 install-sh
-rw-rw-r-- 1 g g    124 Nov 15 18:05 lst
-rw-rw-r-- 1 g g  41057 Nov 15 18:05 Makefile
-rw-rw-r-- 1 g g    112 Nov 15 18:05 Makefile.am
-rw-rw-r-- 1 g g  40226 Nov 15 18:05 Makefile.in
lrwxrwxrwx 1 g g     46 Nov 15 18:05 mdate-sh -> /home/g/src/automake-GIT/automake/lib/mdate-sh
-rwxrwxr-x 1 g g   6878 Nov 15 18:05 missing
-rw-rw-r-- 1 g g     97 Nov 15 18:05 stamp-vti
drwxrwxr-x 3 g g   4096 Nov 15 18:05 sub
lrwxrwxrwx 1 g g     49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex
-rw-rw-r-- 1 g g     97 Nov 15 18:05 version.texi

doc:
total 48
-rw-rw-r-- 1 g g   256 Nov 15 18:05 bar.dvi
-rw-rw-r-- 1 g g 27829 Nov 15 18:05 bar.ps
drwxrwxr-x 3 g g  4096 Nov 15 18:05 bar.t2d
-rw-rw-r-- 1 g g   102 Nov 15 18:05 bar.texi
-rw-rw-r-- 1 g g    97 Nov 15 18:05 stamp-1
-rw-rw-r-- 1 g g    97 Nov 15 18:05 version2.texi

sub:
total 92
-rw-rw-r-- 1 g g   256 Nov 15 18:05 baz.dvi
-rw-rw-r-- 1 g g 27813 Nov 15 18:05 baz.ps
drwxrwxr-x 3 g g  4096 Nov 15 18:05 baz.t2d
-rw-rw-r-- 1 g g   197 Nov 15 18:05 baz.texi
-rw-rw-r-- 1 g g 23324 Nov 15 18:05 Makefile
-rw-rw-r-- 1 g g    76 Nov 15 18:05 Makefile.am
-rw-rw-r-- 1 g g 22476 Nov 15 18:05 Makefile.in
lrwxrwxrwx 1 g g    49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex
+ case $fmt in
+ test -f foo.ps
+ test -f doc/bar.ps
+ test -f baz.ps
+ test -f sub/baz.ps
+ ls -d foo.dvi foo.ps foo.t2d foo.texi baz.dvi baz.ps baz.t2d baz.texi sub/baz.dvi sub/baz.ps sub/baz.t2d sub/baz.texi doc/bar.dvi doc/bar.ps doc/bar.t2d doc/bar.texi
+ basename_rx='(foo|doc/bar|baz|sub/baz)'
+ case $fmt in
+ extension_rx='(texi|ps|dvi|t2d)'
+ /bin/grep -E -v '^(foo|doc/bar|baz|sub/baz)\.(texi|ps|dvi|t2d)$' lst
+ case $fmt in
+ make -j5 clean
Making clean in sub
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
test -z "baz.dvi baz.pdf baz.ps baz.html" \
|| rm -rf baz.dvi baz.pdf baz.ps baz.html
rm -rf baz.t2d baz.t2p
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
test -z "foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \
  doc/bar.html baz.dvi baz.pdf baz.ps baz.html" \
|| rm -rf foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \
  doc/bar.html baz.dvi baz.pdf baz.ps baz.html
rm -f 1.tmp* ./doc/version2.texi.tmp*
rm -rf foo.t2d foo.t2p doc/bar.t2d doc/bar.t2p baz.t2d baz.t2p
rm -f vti.tmp* ./version.texi.tmp*
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
+ for fmt in info pdf ps dvi html all
+ make -j5 dvi
Making dvi in sub
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi  --build-dir=baz.t2d -o baz.dvi  \
baz.texi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi  --build-dir=foo.t2d -o foo.dvi  \
foo.texi
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I doc -I ./doc' \
texi2dvi  --build-dir=doc/bar.t2d -o doc/bar.dvi  \
`test -f 'doc/bar.texi' || echo './'`doc/bar.texi
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi  --build-dir=baz.t2d -o baz.dvi  \
baz.texi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././foo.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/version.texi)
[1] )
Output written on foo.dvi (1 page, 256 bytes).
Transcript written on foo.log.
entering extended mode

(../../../../.././doc/bar.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/doc/version2.texi)
[1] )
Output written on bar.dvi (1 page, 256 bytes).
Transcript written on bar.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
+ ls -l . doc sub
.:
total 364
-rw-rw-r-- 1 g g  27212 Nov 15 18:05 aclocal.m4
drwxr-xr-x 2 g g   4096 Nov 15 18:05 autom4te.cache
-rw-rw-r-- 1 g g    256 Nov 15 18:05 baz.dvi
drwxrwxr-x 3 g g   4096 Nov 15 18:05 baz.t2d
-rw-rw-r-- 1 g g    197 Nov 15 18:05 baz.texi
-rwxrwxr-x 1 g g   7400 Nov 15 18:05 compile
-rw-rw-r-- 1 g g   5411 Nov 15 18:05 config.log
-rwxrwxr-x 1 g g  25438 Nov 15 18:05 config.status
-rwxrwxr-x 1 g g 105659 Nov 15 18:05 configure
-rw-rw-r-- 1 g g    123 Nov 15 18:05 configure.ac
-rwxrwxr-x 1 g g  23568 Nov 15 18:05 depcomp
drwxrwxr-x 3 g g   4096 Nov 15 18:05 doc
-rw-rw-r-- 1 g g    256 Nov 15 18:05 foo.dvi
drwxrwxr-x 3 g g   4096 Nov 15 18:05 foo.t2d
-rw-rw-r-- 1 g g    101 Nov 15 18:05 foo.texi
-rwxrwxr-x 1 g g  15358 Nov 15 18:05 install-sh
-rw-rw-r-- 1 g g    160 Nov 15 18:05 lst
-rw-rw-r-- 1 g g  41057 Nov 15 18:05 Makefile
-rw-rw-r-- 1 g g    112 Nov 15 18:05 Makefile.am
-rw-rw-r-- 1 g g  40226 Nov 15 18:05 Makefile.in
lrwxrwxrwx 1 g g     46 Nov 15 18:05 mdate-sh -> /home/g/src/automake-GIT/automake/lib/mdate-sh
-rwxrwxr-x 1 g g   6878 Nov 15 18:05 missing
-rw-rw-r-- 1 g g     97 Nov 15 18:05 stamp-vti
drwxrwxr-x 3 g g   4096 Nov 15 18:05 sub
lrwxrwxrwx 1 g g     49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex
-rw-rw-r-- 1 g g     97 Nov 15 18:05 version.texi

doc:
total 20
-rw-rw-r-- 1 g g  256 Nov 15 18:05 bar.dvi
drwxrwxr-x 3 g g 4096 Nov 15 18:05 bar.t2d
-rw-rw-r-- 1 g g  102 Nov 15 18:05 bar.texi
-rw-rw-r-- 1 g g   97 Nov 15 18:05 stamp-1
-rw-rw-r-- 1 g g   97 Nov 15 18:05 version2.texi

sub:
total 64
-rw-rw-r-- 1 g g   256 Nov 15 18:05 baz.dvi
drwxrwxr-x 3 g g  4096 Nov 15 18:05 baz.t2d
-rw-rw-r-- 1 g g   197 Nov 15 18:05 baz.texi
-rw-rw-r-- 1 g g 23324 Nov 15 18:05 Makefile
-rw-rw-r-- 1 g g    76 Nov 15 18:05 Makefile.am
-rw-rw-r-- 1 g g 22476 Nov 15 18:05 Makefile.in
lrwxrwxrwx 1 g g    49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex
+ case $fmt in
+ test -f foo.dvi
+ test -f doc/bar.dvi
+ test -f baz.dvi
+ test -f sub/baz.dvi
+ ls -d foo.dvi foo.t2d foo.texi baz.dvi baz.t2d baz.texi sub/baz.dvi sub/baz.t2d sub/baz.texi doc/bar.dvi doc/bar.t2d doc/bar.texi
+ basename_rx='(foo|doc/bar|baz|sub/baz)'
+ case $fmt in
+ extension_rx='(texi|dvi|t2d)'
+ /bin/grep -E -v '^(foo|doc/bar|baz|sub/baz)\.(texi|dvi|t2d)$' lst
+ case $fmt in
+ make -j5 clean
Making clean in sub
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
test -z "baz.dvi baz.pdf baz.ps baz.html" \
|| rm -rf baz.dvi baz.pdf baz.ps baz.html
rm -rf baz.t2d baz.t2p
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
test -z "foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \
  doc/bar.html baz.dvi baz.pdf baz.ps baz.html" \
|| rm -rf foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \
  doc/bar.html baz.dvi baz.pdf baz.ps baz.html
rm -f 1.tmp* ./doc/version2.texi.tmp*
rm -rf foo.t2d foo.t2p doc/bar.t2d doc/bar.t2p baz.t2d baz.t2p
rm -f vti.tmp* ./version.texi.tmp*
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
+ for fmt in info pdf ps dvi html all
+ make -j5 html
Making html in sub
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
rm -rf baz.htp
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html   -I . \
 -o baz.htp baz.texi; \
then \
  rm -rf baz.html && mv baz.htp baz.html; \
else \
  rm -rf baz.htp; exit 1; \
fi
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
rm -rf foo.htp
rm -rf doc/bar.htp
rm -rf baz.htp
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html   -I . \
 -o baz.htp baz.texi; \
then \
  rm -rf baz.html && mv baz.htp baz.html; \
else \
  rm -rf baz.htp; exit 1; \
fi
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html   -I doc -I ./doc \
 -o doc/bar.htp `test -f 'doc/bar.texi' || echo './'`doc/bar.texi; \
then \
  rm -rf doc/bar.html && mv doc/bar.htp doc/bar.html; \
else \
  rm -rf doc/bar.htp; exit 1; \
fi
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html   -I . \
 -o foo.htp foo.texi; \
then \
  rm -rf foo.html && mv foo.htp foo.html; \
else \
  rm -rf foo.htp; exit 1; \
fi
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
+ ls -l . doc sub
.:
total 356
-rw-rw-r-- 1 g g  27212 Nov 15 18:05 aclocal.m4
drwxr-xr-x 2 g g   4096 Nov 15 18:05 autom4te.cache
drwxr-xr-x 2 g g   4096 Nov 15 18:05 baz.html
-rw-rw-r-- 1 g g    197 Nov 15 18:05 baz.texi
-rwxrwxr-x 1 g g   7400 Nov 15 18:05 compile
-rw-rw-r-- 1 g g   5411 Nov 15 18:05 config.log
-rwxrwxr-x 1 g g  25438 Nov 15 18:05 config.status
-rwxrwxr-x 1 g g 105659 Nov 15 18:05 configure
-rw-rw-r-- 1 g g    123 Nov 15 18:05 configure.ac
-rwxrwxr-x 1 g g  23568 Nov 15 18:05 depcomp
drwxrwxr-x 3 g g   4096 Nov 15 18:05 doc
drwxr-xr-x 2 g g   4096 Nov 15 18:05 foo.html
-rw-rw-r-- 1 g g    101 Nov 15 18:05 foo.texi
-rwxrwxr-x 1 g g  15358 Nov 15 18:05 install-sh
-rw-rw-r-- 1 g g    124 Nov 15 18:05 lst
-rw-rw-r-- 1 g g  41057 Nov 15 18:05 Makefile
-rw-rw-r-- 1 g g    112 Nov 15 18:05 Makefile.am
-rw-rw-r-- 1 g g  40226 Nov 15 18:05 Makefile.in
lrwxrwxrwx 1 g g     46 Nov 15 18:05 mdate-sh -> /home/g/src/automake-GIT/automake/lib/mdate-sh
-rwxrwxr-x 1 g g   6878 Nov 15 18:05 missing
-rw-rw-r-- 1 g g     97 Nov 15 18:05 stamp-vti
drwxrwxr-x 3 g g   4096 Nov 15 18:05 sub
lrwxrwxrwx 1 g g     49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex
-rw-rw-r-- 1 g g     97 Nov 15 18:05 version.texi

doc:
total 16
drwxr-xr-x 2 g g 4096 Nov 15 18:05 bar.html
-rw-rw-r-- 1 g g  102 Nov 15 18:05 bar.texi
-rw-rw-r-- 1 g g   97 Nov 15 18:05 stamp-1
-rw-rw-r-- 1 g g   97 Nov 15 18:05 version2.texi

sub:
total 60
drwxr-xr-x 2 g g  4096 Nov 15 18:05 baz.html
-rw-rw-r-- 1 g g   197 Nov 15 18:05 baz.texi
-rw-rw-r-- 1 g g 23324 Nov 15 18:05 Makefile
-rw-rw-r-- 1 g g    76 Nov 15 18:05 Makefile.am
-rw-rw-r-- 1 g g 22476 Nov 15 18:05 Makefile.in
lrwxrwxrwx 1 g g    49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex
+ case $fmt in
+ test -e foo.html
+ test -e doc/bar.html
+ test -e baz.html
+ test -e sub/baz.html
+ ls -d foo.html foo.texi baz.html baz.texi sub/baz.html sub/baz.texi doc/bar.html doc/bar.texi
+ basename_rx='(foo|doc/bar|baz|sub/baz)'
+ case $fmt in
+ extension_rx='(texi|html)'
+ /bin/grep -E -v '^(foo|doc/bar|baz|sub/baz)\.(texi|html)$' lst
+ case $fmt in
+ make -j5 clean
Making clean in sub
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
test -z "baz.dvi baz.pdf baz.ps baz.html" \
|| rm -rf baz.dvi baz.pdf baz.ps baz.html
rm -rf baz.t2d baz.t2p
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
test -z "foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \
  doc/bar.html baz.dvi baz.pdf baz.ps baz.html" \
|| rm -rf foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \
  doc/bar.html baz.dvi baz.pdf baz.ps baz.html
rm -f 1.tmp* ./doc/version2.texi.tmp*
rm -rf foo.t2d foo.t2p doc/bar.t2d doc/bar.t2p baz.t2d baz.t2p
rm -f vti.tmp* ./version.texi.tmp*
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
+ for fmt in info pdf ps dvi html all
+ make -j5 all
Making all in sub
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \
  for f in baz.info baz.info-[0-9] baz.info-[0-9][0-9] baz.i[0-9] baz.i[0-9][0-9]; do \
    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
  done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I . \
 -o baz.info baz.texi; \
then \
  rc=0; \
  CDPATH="${ZSH_VERSION+.}:" && cd .; \
else \
  rc=$?; \
  CDPATH="${ZSH_VERSION+.}:" && cd . && \
  $restore $backupdir/* `echo "./baz.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi  --build-dir=baz.t2d -o baz.dvi  \
baz.texi
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi --pdf --batch  --build-dir=baz.t2p -o baz.pdf  \
baz.texi
rm -rf baz.htp
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html   -I . \
 -o baz.htp baz.texi; \
then \
  rm -rf baz.html && mv baz.htp baz.html; \
else \
  rm -rf baz.htp; exit 1; \
fi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing,entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex
Loading texinfo [version 2020-06-25.17]: sectioning, toc, pdf, environments,
defuns, fonts, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, formatting, and turning on texinfo input format. toc, environments,)
defuns, macros,
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] cross references, )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
 insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on baz.pdf (1 page, 14745 bytes).
Transcript written on baz.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros,entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub/texinfo.tex
Loading texinfo [version 2020-06-25.17]: cross references, insertions, pdf,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) fonts, localization, markup, formatting, and turning on texinfo input format. glyphs,
page headings,) tables,
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1 conditionals,] indexing, )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
 sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on baz.pdf (1 page, 14745 bytes).
Transcript written on baz.log.
TEXINPUTS=".:$TEXINPUTS" \
dvips  -o baz.ps baz.dvi
This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com)
' TeX output 2020.11.15:1805' -> baz.ps
</usr/share/texlive/texmf-dist/dvips/base/tex.pro>
</usr/share/texlive/texmf-dist/dvips/base/texps.pro>. 
</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] 
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \
  for f in foo.info foo.info-[0-9] foo.info-[0-9][0-9] foo.i[0-9] foo.i[0-9][0-9]; do \
    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
  done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I . \
 -o foo.info foo.texi; \
then \
  rc=0; \
  CDPATH="${ZSH_VERSION+.}:" && cd .; \
else \
  rc=$?; \
  CDPATH="${ZSH_VERSION+.}:" && cd . && \
  $restore $backupdir/* `echo "./foo.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \
  for f in doc/bar.info doc/bar.info-[0-9] doc/bar.info-[0-9][0-9] doc/bar.i[0-9] doc/bar.i[0-9][0-9]; do \
    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
  done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I doc -I ./doc \
 -o doc/bar.info ./doc/bar.texi; \
then \
  rc=0; \
  CDPATH="${ZSH_VERSION+.}:" && cd .; \
else \
  rc=$?; \
  CDPATH="${ZSH_VERSION+.}:" && cd . && \
  $restore $backupdir/* `echo "./doc/bar.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --version) >/dev/null 2>&1; then \
  for f in baz.info baz.info-[0-9] baz.info-[0-9][0-9] baz.i[0-9] baz.i[0-9][0-9]; do \
    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
  done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I . \
 -o baz.info baz.texi; \
then \
  rc=0; \
  CDPATH="${ZSH_VERSION+.}:" && cd .; \
else \
  rc=$?; \
  CDPATH="${ZSH_VERSION+.}:" && cd . && \
  $restore $backupdir/* `echo "./baz.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
Making ps in sub
make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[2]: Nothing to be done for 'ps'.
make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
Making pdf in sub
make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi  --build-dir=foo.t2d -o foo.dvi  \
foo.texi
make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[2]: Nothing to be done for 'pdf'.
make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi --pdf --batch  --build-dir=foo.t2p -o foo.pdf  \
foo.texi
Making dvi in sub
make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[2]: Nothing to be done for 'dvi'.
make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi  --build-dir=foo.t2d -o foo.dvi  \
foo.texi
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I doc -I ./doc' \
texi2dvi  --build-dir=doc/bar.t2d -o doc/bar.dvi  \
`test -f 'doc/bar.texi' || echo './'`doc/bar.texi
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi  --build-dir=baz.t2d -o baz.dvi  \
baz.texi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././foo.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/version.texi)
[1] )
Output written on foo.dvi (1 page, 256 bytes).
Transcript written on foo.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
entering extended mode

(../../../.././foo.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/version.texi)
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on foo.pdf (1 page, 14745 bytes).
Transcript written on foo.log.
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I doc -I ./doc' \
texi2dvi  --build-dir=doc/bar.t2d -o doc/bar.dvi  \
`test -f 'doc/bar.texi' || echo './'`doc/bar.texi
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I doc -I ./doc' \
texi2dvi --pdf --batch  --build-dir=doc/bar.t2p -o doc/bar.pdf  \
`test -f 'doc/bar.texi' || echo './'`doc/bar.texi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././foo.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings,entering extended mode

(../../../../.././doc/bar.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: tables, conditionals, indexing, pdf, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, fonts, formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/version.texi)
[1] )
Output written on foo.dvi (1 page, 256 bytes).
Transcript written on foo.log.
 markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/doc/version2.texi)
[1] )
Output written on bar.dvi (1 page, 256 bytes).
Transcript written on bar.log.
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi --pdf --batch  --build-dir=baz.t2p -o baz.pdf  \
baz.texi
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo   -I .' \
texi2dvi  --build-dir=baz.t2d -o baz.dvi  \
baz.texi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../../.././doc/bar.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization,This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
 formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/doc/version2.texi)
[1] )
Output written on bar.dvi (1 page, 256 bytes).
Transcript written on bar.log.
entering extended mode

(../../../../.././doc/bar.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts,make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
 markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/doc/version2.texi)
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on bar.pdf (1 page, 14745 bytes).
Transcript written on bar.log.
Making html in sub
make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[2]: Nothing to be done for 'html'.
make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
rm -rf foo.htp
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html   -I . \
 -o foo.htp foo.texi; \
then \
  rm -rf foo.html && mv foo.htp foo.html; \
else \
  rm -rf foo.htp; exit 1; \
fi
rm -rf doc/bar.htp
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html   -I doc -I ./doc \
 -o doc/bar.htp `test -f 'doc/bar.texi' || echo './'`doc/bar.texi; \
then \
  rm -rf doc/bar.html && mv doc/bar.htp doc/bar.html; \
else \
  rm -rf doc/bar.htp; exit 1; \
fi
TEXINPUTS=".:$TEXINPUTS" \
dvips  -o foo.ps foo.dvi
This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com)
' TeX output 2020.11.15:1805' -> foo.ps
</usr/share/texlive/texmf-dist/dvips/base/tex.pro>
</usr/share/texlive/texmf-dist/dvips/base/texps.pro>. 
</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] 
rm -rf baz.htp
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/missing' makeinfo --html   -I . \
 -o baz.htp baz.texi; \
then \
  rm -rf baz.html && mv baz.htp baz.html; \
else \
  rm -rf baz.htp; exit 1; \
fi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on baz.pdf (1 page, 14745 bytes).
Transcript written on baz.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
TEXINPUTS=".:$TEXINPUTS" \
dvips  -o doc/bar.ps doc/bar.dvi
This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com)
' TeX output 2020.11.15:1805' -> doc/bar.ps
</usr/share/texlive/texmf-dist/dvips/base/tex.pro>
</usr/share/texlive/texmf-dist/dvips/base/texps.pro>. 
</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] 
make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
TEXINPUTS=".:$TEXINPUTS" \
dvips  -o baz.ps baz.dvi
entering extended mode

(../../../.././baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/texinfo.tex
Loading texinfo [version 2020-06-25.17]: pdf, fonts,This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com)
' TeX output 2020.11.15:1805' -> baz.ps
</usr/share/texlive/texmf-dist/dvips/base/tex.pro>
</usr/share/texlive/texmf-dist/dvips/base/texps.pro>.  markup,
</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] 
 glyphs,
page headings,make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
 tables, conditionals, indexing, sectioning, toc, environments,
defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on baz.pdf (1 page, 14745 bytes).
Transcript written on baz.log.
make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
+ ls -l . doc sub
.:
total 476
-rw-rw-r-- 1 g g  27212 Nov 15 18:05 aclocal.m4
drwxr-xr-x 2 g g   4096 Nov 15 18:05 autom4te.cache
-rw-rw-r-- 1 g g    256 Nov 15 18:05 baz.dvi
drwxr-xr-x 2 g g   4096 Nov 15 18:05 baz.html
-rw-rw-r-- 1 g g    226 Nov 15 18:05 baz.info
-rw-rw-r-- 1 g g  14745 Nov 15 18:05 baz.pdf
-rw-rw-r-- 1 g g  27813 Nov 15 18:05 baz.ps
drwxrwxr-x 3 g g   4096 Nov 15 18:05 baz.t2d
drwxrwxr-x 3 g g   4096 Nov 15 18:05 baz.t2p
-rw-rw-r-- 1 g g    197 Nov 15 18:05 baz.texi
-rwxrwxr-x 1 g g   7400 Nov 15 18:05 compile
-rw-rw-r-- 1 g g   5411 Nov 15 18:05 config.log
-rwxrwxr-x 1 g g  25438 Nov 15 18:05 config.status
-rwxrwxr-x 1 g g 105659 Nov 15 18:05 configure
-rw-rw-r-- 1 g g    123 Nov 15 18:05 configure.ac
-rwxrwxr-x 1 g g  23568 Nov 15 18:05 depcomp
drwxrwxr-x 5 g g   4096 Nov 15 18:05 doc
-rw-rw-r-- 1 g g    256 Nov 15 18:05 foo.dvi
drwxr-xr-x 2 g g   4096 Nov 15 18:05 foo.html
-rw-rw-r-- 1 g g    207 Nov 15 18:05 foo.info
-rw-rw-r-- 1 g g  14745 Nov 15 18:05 foo.pdf
-rw-rw-r-- 1 g g  27813 Nov 15 18:05 foo.ps
drwxrwxr-x 3 g g   4096 Nov 15 18:05 foo.t2d
drwxrwxr-x 3 g g   4096 Nov 15 18:05 foo.t2p
-rw-rw-r-- 1 g g    101 Nov 15 18:05 foo.texi
-rwxrwxr-x 1 g g  15358 Nov 15 18:05 install-sh
-rw-rw-r-- 1 g g     88 Nov 15 18:05 lst
-rw-rw-r-- 1 g g  41057 Nov 15 18:05 Makefile
-rw-rw-r-- 1 g g    112 Nov 15 18:05 Makefile.am
-rw-rw-r-- 1 g g  40226 Nov 15 18:05 Makefile.in
lrwxrwxrwx 1 g g     46 Nov 15 18:05 mdate-sh -> /home/g/src/automake-GIT/automake/lib/mdate-sh
-rwxrwxr-x 1 g g   6878 Nov 15 18:05 missing
-rw-rw-r-- 1 g g     97 Nov 15 18:05 stamp-vti
drwxrwxr-x 5 g g   4096 Nov 15 18:05 sub
lrwxrwxrwx 1 g g     49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex
-rw-rw-r-- 1 g g     97 Nov 15 18:05 version.texi

doc:
total 76
-rw-rw-r-- 1 g g   256 Nov 15 18:05 bar.dvi
drwxr-xr-x 2 g g  4096 Nov 15 18:05 bar.html
-rw-rw-r-- 1 g g   207 Nov 15 18:05 bar.info
-rw-rw-r-- 1 g g 14745 Nov 15 18:05 bar.pdf
-rw-rw-r-- 1 g g 27829 Nov 15 18:05 bar.ps
drwxrwxr-x 3 g g  4096 Nov 15 18:05 bar.t2d
drwxrwxr-x 3 g g  4096 Nov 15 18:05 bar.t2p
-rw-rw-r-- 1 g g   102 Nov 15 18:05 bar.texi
-rw-rw-r-- 1 g g    97 Nov 15 18:05 stamp-1
-rw-rw-r-- 1 g g    97 Nov 15 18:05 version2.texi

sub:
total 120
-rw-rw-r-- 1 g g   256 Nov 15 18:05 baz.dvi
drwxr-xr-x 2 g g  4096 Nov 15 18:05 baz.html
-rw-rw-r-- 1 g g   226 Nov 15 18:05 baz.info
-rw-rw-r-- 1 g g 14745 Nov 15 18:05 baz.pdf
-rw-rw-r-- 1 g g 27813 Nov 15 18:05 baz.ps
drwxrwxr-x 3 g g  4096 Nov 15 18:05 baz.t2d
drwxrwxr-x 3 g g  4096 Nov 15 18:05 baz.t2p
-rw-rw-r-- 1 g g   197 Nov 15 18:05 baz.texi
-rw-rw-r-- 1 g g 23324 Nov 15 18:05 Makefile
-rw-rw-r-- 1 g g    76 Nov 15 18:05 Makefile.am
-rw-rw-r-- 1 g g 22476 Nov 15 18:05 Makefile.in
lrwxrwxrwx 1 g g    49 Nov 15 18:05 texinfo.tex -> /home/g/src/automake-GIT/automake/lib/texinfo.tex
+ case $fmt in
+ for x in info pdf ps dvi
+ test -f foo.info
+ test -f doc/bar.info
+ test -f baz.info
+ test -f sub/baz.info
+ for x in info pdf ps dvi
+ test -f foo.pdf
+ test -f doc/bar.pdf
+ test -f baz.pdf
+ test -f sub/baz.pdf
+ for x in info pdf ps dvi
+ test -f foo.ps
+ test -f doc/bar.ps
+ test -f baz.ps
+ test -f sub/baz.ps
+ for x in info pdf ps dvi
+ test -f foo.dvi
+ test -f doc/bar.dvi
+ test -f baz.dvi
+ test -f sub/baz.dvi
+ test -e foo.html
+ test -e doc/bar.html
+ test -e baz.html
+ test -e sub/baz.html
+ ls -d foo.dvi foo.html foo.info foo.pdf foo.ps foo.t2d foo.t2p foo.texi baz.dvi baz.html baz.info baz.pdf baz.ps baz.t2d baz.t2p baz.texi sub/baz.dvi sub/baz.html sub/baz.info sub/baz.pdf sub/baz.ps sub/baz.t2d sub/baz.t2p sub/baz.texi doc/bar.dvi doc/bar.html doc/bar.info doc/bar.pdf doc/bar.ps doc/bar.t2d doc/bar.t2p doc/bar.texi
+ basename_rx='(foo|doc/bar|baz|sub/baz)'
+ case $fmt in
+ extension_rx='(texi|html|info|pdf|ps|dvi|t2[pd])'
+ /bin/grep -E -v '^(foo|doc/bar|baz|sub/baz)\.(texi|html|info|pdf|ps|dvi|t2[pd])$' lst
+ case $fmt in
+ make -j5 clean
Making clean in sub
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
test -z "baz.dvi baz.pdf baz.ps baz.html" \
|| rm -rf baz.dvi baz.pdf baz.ps baz.html
rm -rf baz.t2d baz.t2p
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
test -z "foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \
  doc/bar.html baz.dvi baz.pdf baz.ps baz.html" \
|| rm -rf foo.dvi foo.pdf foo.ps foo.html doc/bar.dvi doc/bar.pdf doc/bar.ps \
  doc/bar.html baz.dvi baz.pdf baz.ps baz.html
rm -f 1.tmp* ./doc/version2.texi.tmp*
rm -rf foo.t2d foo.t2p doc/bar.t2d doc/bar.t2p baz.t2d baz.t2p
rm -f vti.tmp* ./version.texi.tmp*
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
+ make -j5 distcheck
make  dist-gzip am__post_remove_distdir='@:'
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
make  distdir-am
make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
if test -d "txinfo-no-clutter-1.0"; then find "txinfo-no-clutter-1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "txinfo-no-clutter-1.0" || { sleep 5 && rm -rf "txinfo-no-clutter-1.0"; }; else :; fi
test -d "txinfo-no-clutter-1.0" || mkdir "txinfo-no-clutter-1.0"
 (cd sub && make  top_distdir=../txinfo-no-clutter-1.0 distdir=../txinfo-no-clutter-1.0/sub \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make  distdir-am
make[4]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make  \
  top_distdir="../txinfo-no-clutter-1.0" distdir="../txinfo-no-clutter-1.0/sub" \
  dist-info
make[5]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[5]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[4]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/sub'
make  \
  top_distdir="txinfo-no-clutter-1.0" distdir="txinfo-no-clutter-1.0" \
  dist-info
make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
test -n "" \
|| find "txinfo-no-clutter-1.0" -type d ! -perm -755 \
	-exec chmod u+rwx,go+rx {} \; -o \
  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -444 -exec /bin/bash /home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "txinfo-no-clutter-1.0"
make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
tardir=txinfo-no-clutter-1.0 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >txinfo-no-clutter-1.0.tar.gz
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir'
if test -d "txinfo-no-clutter-1.0"; then find "txinfo-no-clutter-1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "txinfo-no-clutter-1.0" || { sleep 5 && rm -rf "txinfo-no-clutter-1.0"; }; else :; fi
case 'txinfo-no-clutter-1.0.tar.gz' in \
*.tar.gz*) \
  eval GZIP= gzip --best -dc txinfo-no-clutter-1.0.tar.gz | ${TAR-tar} xf - ;;\
*.tar.bz2*) \
  bzip2 -dc txinfo-no-clutter-1.0.tar.bz2 | ${TAR-tar} xf - ;;\
*.tar.lz*) \
  lzip -dc txinfo-no-clutter-1.0.tar.lz | ${TAR-tar} xf - ;;\
*.tar.xz*) \
  xz -dc txinfo-no-clutter-1.0.tar.xz | ${TAR-tar} xf - ;;\
*.tar.Z*) \
  uncompress -c txinfo-no-clutter-1.0.tar.Z | ${TAR-tar} xf - ;;\
*.shar.gz*) \
  eval GZIP= gzip --best -dc txinfo-no-clutter-1.0.shar.gz | unshar ;;\
*.zip*) \
  unzip txinfo-no-clutter-1.0.zip ;;\
*.tar.zst*) \
  zstd -dc txinfo-no-clutter-1.0.tar.zst | ${TAR-tar} xf - ;;\
esac
chmod -R a-w txinfo-no-clutter-1.0
chmod u+w txinfo-no-clutter-1.0
mkdir txinfo-no-clutter-1.0/_build txinfo-no-clutter-1.0/_build/sub txinfo-no-clutter-1.0/_inst
chmod a-w txinfo-no-clutter-1.0
test -d txinfo-no-clutter-1.0/_build || exit 0; \
dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd txinfo-no-clutter-1.0/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
  && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \
  && am__cwd=`pwd` \
  && CDPATH="${ZSH_VERSION+.}:" && cd txinfo-no-clutter-1.0/_build/sub \
  && ../../configure \
     \
     \
    --srcdir=../.. --prefix="$dc_install_base" \
  && make  \
  && make  dvi \
  && make  check \
  && make  install \
  && make  installcheck \
  && make  uninstall \
  && make  distuninstallcheck_dir="$dc_install_base" \
        distuninstallcheck \
  && chmod -R a-w "$dc_install_base" \
  && ({ \
       (cd ../.. && umask 077 && mkdir "$dc_destdir") \
       && make  DESTDIR="$dc_destdir" install \
       && make  DESTDIR="$dc_destdir" uninstall \
       && make  DESTDIR="$dc_destdir" \
            distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \
      } || { rm -rf "$dc_destdir"; exit 1; }) \
  && rm -rf "$dc_destdir" \
  && make  dist \
  && rm -rf txinfo-no-clutter-1.0.tar.gz \
  && make  distcleancheck \
  && cd "$am__cwd" \
  || exit 1
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating sub/Makefile
make[1]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub'
Making all in sub
make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub'
TEXINPUTS="../../../sub:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo   -I ../../../sub' \
texi2dvi  --build-dir=baz.t2d -o baz.dvi  \
../../../sub/baz.texi
TEXINPUTS="../../../sub:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo   -I ../../../sub' \
texi2dvi --pdf --batch  --build-dir=baz.t2p -o baz.pdf  \
../../../sub/baz.texi
rm -rf baz.htp
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo --html   -I ../../../sub \
 -o baz.htp ../../../sub/baz.texi; \
then \
  rm -rf baz.html && mv baz.htp baz.html; \
else \
  rm -rf baz.htp; exit 1; \
fi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././../../../sub/baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup,
glyphs, page headings, tables, conditionals, indexing, sectioning, toc,
environments, defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
entering extended mode

(../../../.././../../../sub/baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup,
glyphs, page headings, tables, conditionals, indexing, sectioning, toc,
environments, defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfbThis is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
>
Output written on baz.pdf (1 page, 14745 bytes).
Transcript written on baz.log.
entering extended mode

(../../../.././../../../sub/baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup,
glyphs, page headings, tables, conditionals, indexing, sectioning, toc,
environments, defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
TEXINPUTS="../../../sub:$TEXINPUTS" \
dvips  -o baz.ps baz.dvi
entering extended mode

(../../../.././../../../sub/baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/sub/texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts, markup,
glyphs, page headings, tables, conditionals, indexing, sectioning, toc,
environments,This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com)
' TeX output 2020.11.15:1805' -> baz.ps
 defuns,</usr/share/texlive/texmf-dist/dvips/base/tex.pro> macros,
</usr/share/texlive/texmf-dist/dvips/base/texps.pro>.  cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] 

This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on baz.pdf (1 page, 14745 bytes).
Transcript written on baz.log.
make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub'
make[2]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub'
Making html in sub
Making ps in sub
Making dvi in sub
make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub'
make[3]: Nothing to be done for 'html'.
make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub'
Making pdf in sub
make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub'
make[3]: Nothing to be done for 'ps'.
make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub'
make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub'
rm -rf foo.htp
make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub'
make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub'
make[3]: Nothing to be done for 'pdf'.
make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub/sub'
make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub'
TEXINPUTS="../..:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo   -I ../..' \
texi2dvi  --build-dir=foo.t2d -o foo.dvi  \
../../foo.texi
make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub'
TEXINPUTS="../..:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo   -I ../..' \
texi2dvi  --build-dir=foo.t2d -o foo.dvi  \
../../foo.texi
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo --html   -I ../.. \
 -o foo.htp ../../foo.texi; \
then \
  rm -rf foo.html && mv foo.htp foo.html; \
else \
  rm -rf foo.htp; exit 1; \
fi
rm -rf baz.htp
make[3]: Entering directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub'
TEXINPUTS="../..:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo   -I ../..' \
texi2dvi --pdf --batch  --build-dir=foo.t2p -o foo.pdf  \
../../foo.texi
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo --html   -I ../.. \
 -o baz.htp ../../baz.texi; \
then \
  rm -rf baz.html && mv baz.htp baz.html; \
else \
  rm -rf baz.htp; exit 1; \
fi
mkdir: cannot create directory ‘foo.t2d/foo.t2d/dvi/bak’: File exists
mkdir: cannot create directory ‘foo.t2d/foo.t2d/dvi/check_recorder’: File exists
TEXINPUTS="../..:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo   -I doc -I ../../doc' \
texi2dvi --pdf --batch  --build-dir=doc/bar.t2p -o doc/bar.pdf  \
`test -f 'doc/bar.texi' || echo '../../'`doc/bar.texi
rm -rf doc/bar.htp
if /bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo --html   -I doc -I ../../doc \
 -o doc/bar.htp `test -f 'doc/bar.texi' || echo '../../'`doc/bar.texi; \
then \
  rm -rf doc/bar.html && mv doc/bar.htp doc/bar.html; \
else \
  rm -rf doc/bar.htp; exit 1; \
fi
make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub'
TEXINPUTS="../..:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo   -I doc -I ../../doc' \
texi2dvi  --build-dir=doc/bar.t2d -o doc/bar.dvi  \
`test -f 'doc/bar.texi' || echo '../../'`doc/bar.texi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../.././../../foo.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,
markup, glyphs, page headings, tables,This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
 conditionals, indexing, sectioning,
toc, environments, defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization,This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
 formatting, and turning on texinfo input format.)entering extended mode

(../../../.././../../foo.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/_build/../version.texi) [1] )
Output written on foo.dvi (1 page, 256 bytes).
Transcript written on foo.log.
entering extended mode

(../../../.././../../foo.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,
markup, glyphs, page headings, tables, conditionals, indexing, sectioning,
toc, environments, defuns, macros,
markup, cross references, glyphs, page headings, insertions, tables,
(/usr/share/texmf/tex/generic/epsf/epsf.tex conditionals,
This is `epsf.tex' v2.7.4 <14 February 2011>
) indexing, localization, sectioning,
toc, environments, defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/_build/../version.texi) [1] )
Output written on foo.dvi (1 page, 256 bytes).
Transcript written on foo.log.
 formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/_build/../version.texi) [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}
] )</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on foo.pdf (1 page, 14745 bytes).
Transcript written on foo.log.
mv: cannot stat 'foo.dvi': No such file or directory
Makefile:411: recipe for target 'foo.dvi' failed
make[3]: *** [foo.dvi] Error 1
make[3]: *** Waiting for unfinished jobs....
TEXINPUTS="../..:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo   -I ../..' \
texi2dvi  --build-dir=baz.t2d -o baz.dvi  \
../../baz.texi
TEXINPUTS="../..:$TEXINPUTS" \
dvips  -o foo.ps foo.dvi
This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com)
' TeX output 2020.11.15:1805' -> foo.ps
TEXINPUTS="../..:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo   -I ../..' \
texi2dvi --pdf --batch  --build-dir=baz.t2p -o baz.pdf  \
../../baz.texi
</usr/share/texlive/texmf-dist/dvips/base/tex.pro>
</usr/share/texlive/texmf-dist/dvips/base/texps.pro>. 
</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>[1] 
TEXINPUTS="../..:$TEXINPUTS" \
MAKEINFO='/bin/bash '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/missing' makeinfo   -I doc -I ../../doc' \
texi2dvi  --build-dir=doc/bar.t2d -o doc/bar.dvi  \
`test -f 'doc/bar.texi' || echo '../../'`doc/bar.texi
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
entering extended mode

(../../../../.././../../doc/bar.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,
markup, glyphs, page headings, tables, conditionals, indexing, sectioning,
toc, environments, defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/doc/version2.texi) [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</
usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on bar.pdf (1 page, 14745 bytes).
Transcript written on bar.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
entering extended mode

(../../../../.././../../doc/bar.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,
markup, glyphs, page headings, tables, conditionals, indexing, sectioning,
toc, environments, defuns, macros,This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
 cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/doc/version2.texi) [1] )
Output written on bar.dvi (1 page, 256 bytes).
Transcript written on bar.log.
entering extended mode

(../../../../.././../../doc/bar.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,
markup, glyphs, page headings, tables, conditionals, indexing, sectioning,
toc, environments, defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/doc/version2.texi) [1] )
Output written on bar.dvi (1 page, 256 bytes).
Transcript written on bar.log.
mv: cannot stat 'bar.dvi': No such file or directory
Makefile:482: recipe for target 'doc/bar.dvi' failed
make[3]: *** [doc/bar.dvi] Error 1
make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub'
Makefile:630: recipe for target 'dvi-recursive' failed
make[2]: *** [dvi-recursive] Error 1
make[2]: *** Waiting for unfinished jobs....
TEXINPUTS="../..:$TEXINPUTS" \
dvips  -o doc/bar.ps doc/bar.dvi
This is dvips(k) 5.997 Copyright 2017 Radical Eye Software (www.radicaleye.com)
dvips: DVI file can't be opened: doc/bar.dvi: No such file or directory
Makefile:528: recipe for target 'doc/bar.ps' failed
make[3]: *** [doc/bar.ps] Error 1
make[3]: *** Waiting for unfinished jobs....
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
entering extended mode

(../../../.././../../baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,entering extended mode

(../../../.././../../baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,
markup, glyphs, page headings, tables, conditionals, indexing, sectioning,
toc, environments, defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
markup,
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, glyphs, page headings, tables, conditionals, indexing, sectioning,
toc, environments, defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
 formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on baz.pdf (1 page, 14745 bytes).
Transcript written on baz.log.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=etex)
 restricted \write18 enabled.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdfetex)
 restricted \write18 enabled.
entering extended mode

(../../../.././../../baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]: pdf, fonts,entering extended mode

(../../../.././../../baz.texi
(/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.
0/_build/../texinfo.tex Loading texinfo [version 2020-06-25.17]:
markup, pdf, glyphs, page headings, fonts, tables, conditionals, indexing, sectioning,
toc, environments, defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization,
markup, glyphs, page headings, tables, conditionals, indexing, sectioning,
toc, environments, defuns, macros, cross references, insertions,
(/usr/share/texmf/tex/generic/epsf/epsf.tex formatting,
This is `epsf.tex' v2.7.4 <14 February 2011>
) and turning on texinfo input format. localization,)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1] )
Output written on baz.dvi (1 page, 256 bytes).
Transcript written on baz.log.
 formatting, and turning on texinfo input format.)
Writing index file baz.cp
Writing index file baz.pg
Writing index file baz.au
Writing index file baz.sa
Writing index file baz.sb
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] )</usr/share/texlive/tex
mf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on baz.pdf (1 page, 14745 bytes).
Transcript written on baz.log.
make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub'
Makefile:630: recipe for target 'ps-recursive' failed
make[2]: *** [ps-recursive] Error 1
make[3]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub'
make[2]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub'
Makefile:630: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/g/src/automake-GIT/automake/t/txinfo-no-clutter.dir/txinfo-no-clutter-1.0/_build/sub'
Makefile:846: recipe for target 'distcheck' failed
make: *** [distcheck] Error 1
+ am_exit_trap 2
+ exit_status=2
+ set +e
+ cd /home/g/src/automake-GIT/automake
+ test none = tap
+ case $am_explicit_skips in
+ test 2 -eq 0
+ keep_testdirs=yes
+ am_keeping_testdirs
+ case $keep_testdirs in
+ return 0
+ set +x
FAIL t/txinfo-no-clutter.sh (exit status: 2)