[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[bug#60542] [PATCH/committed] maint: Update files from upstream with 'ma
|
From: |
Mike Frysinger |
|
Subject: |
[bug#60542] [PATCH/committed] maint: Update files from upstream with 'make fetch' |
|
Date: |
Wed, 4 Jan 2023 01:58:56 -0500 |
Pulls some 2023 copyright updates.
* lib/config.guess: Update.
* lib/config.sub: Likewise.
* lib/gendocs.sh: Likewise.
* lib/gendocs_template: Likewise.
* lib/gitlog-to-changelog: Likewise.
* lib/gnupload: Likewise.
* lib/texinfo.tex: Likewise.
* lib/update-copyright: Likewise.
---
lib/config.guess | 8 +-
lib/config.sub | 27 +-
lib/gendocs.sh | 8 +-
lib/gendocs_template | 2 +-
lib/gitlog-to-changelog | 2 +-
lib/gnupload | 2 +-
lib/texinfo.tex | 1330 ++++++++++++++++++++++-----------------
lib/update-copyright | 2 +-
8 files changed, 773 insertions(+), 608 deletions(-)
diff --git a/lib/config.guess b/lib/config.guess
index a419d8643b62..980b02083815 100755
--- a/lib/config.guess
+++ b/lib/config.guess
@@ -4,7 +4,7 @@
# shellcheck disable=SC2006,SC2268 # see below for rationale
-timestamp='2022-08-01'
+timestamp='2022-09-17'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -966,6 +966,12 @@ EOF
GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_MACHINE-unknown-$GNU_SYS$GNU_REL-$LIBC
;;
+ x86_64:[Mm]anagarm:*:*|i?86:[Mm]anagarm:*:*)
+ GUESS="$UNAME_MACHINE-pc-managarm-mlibc"
+ ;;
+ *:[Mm]anagarm:*:*)
+ GUESS="$UNAME_MACHINE-unknown-managarm-mlibc"
+ ;;
*:Minix:*:*)
GUESS=$UNAME_MACHINE-unknown-minix
;;
diff --git a/lib/config.sub b/lib/config.sub
index fbaa37f2352d..baf1512b3c03 100755
--- a/lib/config.sub
+++ b/lib/config.sub
@@ -4,7 +4,7 @@
# shellcheck disable=SC2006,SC2268 # see below for rationale
-timestamp='2022-08-01'
+timestamp='2022-09-17'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -145,7 +145,7 @@ case $1 in
nto-qnx* | linux-* | uclinux-uclibc* \
| uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* |
netbsd*-gnu* \
| netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \
- | storm-chaos* | os2-emx* | rtmk-nova*)
+ | storm-chaos* | os2-emx* | rtmk-nova* | managarm-*)
basic_machine=$field1
basic_os=$maybe_os
;;
@@ -1341,6 +1341,10 @@ EOF
kernel=linux
os=`echo "$basic_os" | sed -e 's|linux|gnu|'`
;;
+ managarm*)
+ kernel=managarm
+ os=`echo "$basic_os" | sed -e 's|managarm|mlibc|'`
+ ;;
*)
kernel=
os=$basic_os
@@ -1754,7 +1758,7 @@ case $os in
| onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \
| midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi* \
| nsk* | powerunix* | genode* | zvmoe* | qnx* | emx* | zephyr* \
- | fiwix* )
+ | fiwix* | mlibc* )
;;
# This one is extra strict with allowed versions
sco3.2v2 | sco3.2v[4-9]* | sco5v6*)
@@ -1762,6 +1766,9 @@ case $os in
;;
none)
;;
+ kernel* )
+ # Restricted further below
+ ;;
*)
echo Invalid configuration \`"$1"\': OS \`"$os"\' not
recognized 1>&2
exit 1
@@ -1772,16 +1779,26 @@ esac
# (given a valid OS), if there is a kernel.
case $kernel-$os in
linux-gnu* | linux-dietlibc* | linux-android* | linux-newlib* \
- | linux-musl* | linux-relibc* | linux-uclibc* )
+ | linux-musl* | linux-relibc* | linux-uclibc* | linux-mlibc*
)
;;
uclinux-uclibc* )
;;
- -dietlibc* | -newlib* | -musl* | -relibc* | -uclibc* )
+ managarm-mlibc* | managarm-kernel* )
+ ;;
+ -dietlibc* | -newlib* | -musl* | -relibc* | -uclibc* | -mlibc* )
# These are just libc implementations, not actual OSes, and thus
# require a kernel.
echo "Invalid configuration \`$1': libc \`$os' needs explicit
kernel." 1>&2
exit 1
;;
+ -kernel* )
+ echo "Invalid configuration \`$1': \`$os' needs explicit
kernel." 1>&2
+ exit 1
+ ;;
+ *-kernel* )
+ echo "Invalid configuration \`$1': \`$kernel' does not support
\`$os'." 1>&2
+ exit 1
+ ;;
kfreebsd*-gnu* | kopensolaris*-gnu*)
;;
vxworks-simlinux | vxworks-simwindows | vxworks-spe)
diff --git a/lib/gendocs.sh b/lib/gendocs.sh
index f6811eea4618..9afe3100e1b9 100755
--- a/lib/gendocs.sh
+++ b/lib/gendocs.sh
@@ -2,9 +2,9 @@
# gendocs.sh -- generate a GNU manual in many formats. This script is
# mentioned in maintain.texi. See the help message below for usage details.
-scriptversion=2022-01-01.00
+scriptversion=2023-01-01.00
-# Copyright 2003-2022 Free Software Foundation, Inc.
+# Copyright 2003-2023 Free Software Foundation, Inc.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -40,7 +40,7 @@ srcdir=`pwd`
scripturl="https://git.savannah.gnu.org/cgit/gnulib.git/plain/build-aux/gendocs.sh";
templateurl="https://git.savannah.gnu.org/cgit/gnulib.git/plain/doc/gendocs_template";
-: "${SETLANG="env LANG= LC_MESSAGES= LC_ALL= LANGUAGE="}"
+: "${SETLANG="env LANG= LC_TIME= LC_MESSAGES= LC_ALL= LANGUAGE="}"
: "${MAKEINFO="makeinfo"}"
: "${TEXI2DVI="texi2dvi"}"
: "${DOCBOOK2HTML="docbook2html"}"
@@ -73,7 +73,7 @@ texarg="-t @finalout"
version="gendocs.sh $scriptversion
-Copyright 2022 Free Software Foundation, Inc.
+Copyright 2023 Free Software Foundation, Inc.
There is NO warranty. You may redistribute this software
under the terms of the GNU General Public License.
For more information about these matters, see the files named COPYING."
diff --git a/lib/gendocs_template b/lib/gendocs_template
index 0415d947be65..a101977dfc43 100644
--- a/lib/gendocs_template
+++ b/lib/gendocs_template
@@ -2,7 +2,7 @@
<!-- Parent-Version: 1.78 -->
<!--
-Copyright (C) 2006-2022 Free Software Foundation, Inc.
+Copyright (C) 2006-2023 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
diff --git a/lib/gitlog-to-changelog b/lib/gitlog-to-changelog
index 82d9f9733666..4678bad10505 100755
--- a/lib/gitlog-to-changelog
+++ b/lib/gitlog-to-changelog
@@ -3,7 +3,7 @@
# Convert git log output to ChangeLog format.
-# Copyright (C) 2008-2022 Free Software Foundation, Inc.
+# Copyright (C) 2008-2023 Free Software Foundation, Inc.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
diff --git a/lib/gnupload b/lib/gnupload
index b97e566f9dc0..215a9388894a 100755
--- a/lib/gnupload
+++ b/lib/gnupload
@@ -3,7 +3,7 @@
scriptversion=2022-01-27.18; # UTC
-# Copyright (C) 2004-2022 Free Software Foundation, Inc.
+# Copyright (C) 2004-2023 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
diff --git a/lib/texinfo.tex b/lib/texinfo.tex
index 09f2d28c2f22..3cccf01d9582 100644
--- a/lib/texinfo.tex
+++ b/lib/texinfo.tex
@@ -3,9 +3,9 @@
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2022-09-21.15}
+\def\texinfoversion{2023-01-02.21}
%
-% Copyright 1985, 1986, 1988, 1990-2022 Free Software Foundation, Inc.
+% Copyright 1985, 1986, 1988, 1990-2023 Free Software Foundation, Inc.
%
% This texinfo.tex file is free software: you can redistribute it and/or
% modify it under the terms of the GNU General Public License as
@@ -58,12 +58,6 @@
\message{Loading texinfo [version \texinfoversion]:}
-% If in a .fmt file, print the version number
-% and turn on active characters that we couldn't do earlier because
-% they might have appeared in the input file name.
-\everyjob{\message{[Texinfo version \texinfoversion]}%
- \catcode`+=\active \catcode`\_=\active}
-
% LaTeX's \typeout. This ensures that the messages it is used for
% are identical in format to the corresponding ones from latex/pdflatex.
\def\typeout{\immediate\write17}%
@@ -530,7 +524,7 @@
% ... but they get defined via ``\envdef\foo{...}'':
\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
-\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
+\long\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
% Check whether we're in the right environment:
\def\checkenv#1{%
@@ -591,6 +585,9 @@
% @/ allows a line break.
\let\/=\allowbreak
+% @- allows explicit insertion of hyphenation points
+\def\-{\discretionary{\normaldash}{}{}}%
+
% @. is an end-of-sentence period.
\def\.{.\spacefactor=\endofsentencespacefactor\space}
@@ -1197,13 +1194,17 @@ output) for that.)}
%
% Set color, and create a mark which defines \thiscolor accordingly,
% so that \makeheadline knows which color to restore.
+ \def\curcolor{0 0 0}%
\def\setcolor#1{%
- \xdef\currentcolordefs{\gdef\noexpand\thiscolor{#1}}%
- \domark
- \pdfsetcolor{#1}%
+ \ifx#1\curcolor\else
+ \xdef\currentcolordefs{\gdef\noexpand\thiscolor{#1}}%
+ \domark
+ \pdfsetcolor{#1}%
+ \xdef\curcolor{#1}%
+ \fi
}
%
- \def\maincolor{\rgbBlack}
+ \let\maincolor\rgbBlack
\pdfsetcolor{\maincolor}
\edef\thiscolor{\maincolor}
\def\currentcolordefs{}
@@ -1359,7 +1360,7 @@ output) for that.)}
%
% by default, use black for everything.
\def\urlcolor{\rgbBlack}
- \def\linkcolor{\rgbBlack}
+ \let\linkcolor\rgbBlack
\def\endlink{\setcolor{\maincolor}\pdfendlink}
%
% Adding outlines to PDF; macros for calculating structure of outlines
@@ -1537,9 +1538,10 @@ output) for that.)}
\next}
\def\makelink{\addtokens{\toksB}%
{\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
- \def\pdflink#1{%
+ \def\pdflink#1{\pdflinkpage{#1}{#1}}%
+ \def\pdflinkpage#1#2{%
\startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
- \setcolor{\linkcolor}#1\endlink}
+ \setcolor{\linkcolor}#2\endlink}
\def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
\else
% non-pdf mode
@@ -1786,10 +1788,11 @@ output) for that.)}
\next}
\def\makelink{\addtokens{\toksB}%
{\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
- \def\pdflink#1{%
+ \def\pdflink#1{\pdflinkpage{#1}{#1}}%
+ \def\pdflinkpage#1#2{%
\special{pdf:bann << /Border [0 0 0]
/Type /Annot /Subtype /Link /A << /S /GoTo /D (#1) >> >>}%
- \setcolor{\linkcolor}#1\endlink}
+ \setcolor{\linkcolor}#2\endlink}
\def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
%
%
@@ -2134,6 +2137,11 @@ end
\pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
}%
\fi\fi
+%
+% This is what gets called when #5 of \setfont is empty.
+\let\cmap\gobble
+%
+% (end of cmaps)
% Set the font macro #1 to the font named \fontprefix#2.
@@ -2149,11 +2157,10 @@ end
\def\setfont#1#2#3#4#5{%
\font#1=\fontprefix#2#3 scaled #4
\csname cmap#5\endcsname#1%
+ \ifx#2\ttshape\hyphenchar#1=-1 \fi
+ \ifx#2\ttbshape\hyphenchar#1=-1 \fi
+ \ifx#2\ttslshape\hyphenchar#1=-1 \fi
}
-% This is what gets called when #5 of \setfont is empty.
-\let\cmap\gobble
-%
-% (end of cmaps)
% Use cm as the default font prefix.
% To specify the font prefix, you must define \fontprefix
@@ -2544,34 +2551,30 @@ end
\scriptfont\sffam=\sevensf
}
-%
-% The font-changing commands (all called \...fonts) redefine the meanings
-% of \STYLEfont, instead of just \STYLE. We do this because \STYLE needs
-% to also set the current \fam for math mode. Our \STYLE (e.g., \rm)
-% commands hardwire \STYLEfont to set the current font.
-%
-% The fonts used for \ifont are for "math italics" (\itfont is for italics
-% in regular text). \syfont is also used in math mode only.
-%
-% Each font-changing command also sets the names \lsize (one size lower)
-% and \lllsize (three sizes lower). These relative commands are used
-% in, e.g., the LaTeX logo and acronyms.
-%
-% This all needs generalizing, badly.
+
+% \defineassignfonts{SIZE} -
+% Define sequence \assignfontsSIZE, which switches between font sizes
+% by redefining the meanings of \STYLEfont. (Just \STYLE additionally sets
+% the current \fam for math mode.)
%
+\def\defineassignfonts#1{%
+ \expandafter\edef\csname assignfonts#1\endcsname{%
+ \let\noexpand\rmfont\csname #1rm\endcsname
+ \let\noexpand\itfont\csname #1it\endcsname
+ \let\noexpand\slfont\csname #1sl\endcsname
+ \let\noexpand\bffont\csname #1bf\endcsname
+ \let\noexpand\ttfont\csname #1tt\endcsname
+ \let\noexpand\smallcaps\csname #1sc\endcsname
+ \let\noexpand\sffont \csname #1sf\endcsname
+ \let\noexpand\ifont \csname #1i\endcsname
+ \let\noexpand\syfont \csname #1sy\endcsname
+ \let\noexpand\ttslfont\csname #1ttsl\endcsname
+ }
+}
\def\assignfonts#1{%
- \expandafter\let\expandafter\rmfont\csname #1rm\endcsname
- \expandafter\let\expandafter\itfont\csname #1it\endcsname
- \expandafter\let\expandafter\slfont\csname #1sl\endcsname
- \expandafter\let\expandafter\bffont\csname #1bf\endcsname
- \expandafter\let\expandafter\ttfont\csname #1tt\endcsname
- \expandafter\let\expandafter\smallcaps\csname #1sc\endcsname
- \expandafter\let\expandafter\sffont \csname #1sf\endcsname
- \expandafter\let\expandafter\ifont \csname #1i\endcsname
- \expandafter\let\expandafter\syfont \csname #1sy\endcsname
- \expandafter\let\expandafter\ttslfont\csname #1ttsl\endcsname
+ \csname assignfonts#1\endcsname
}
\newif\ifrmisbold
@@ -2595,12 +2598,21 @@ end
\csname\curfontstyle\endcsname
}%
+% Define the font-changing commands (all called \...fonts).
+% Each font-changing command also sets the names \lsize (one size lower)
+% and \lllsize (three sizes lower). These relative commands are used
+% in, e.g., the LaTeX logo and acronyms.
+%
+% Note: The fonts used for \ifont are for "math italics" (\itfont is for
+% italics in regular text). \syfont is also used in math mode only.
+%
\def\definefontsetatsize#1#2#3#4#5{%
+ \defineassignfonts{#1}%
\expandafter\def\csname #1fonts\endcsname{%
\def\curfontsize{#1}%
\def\lsize{#2}\def\lllsize{#3}%
\csname rmisbold#5\endcsname
- \assignfonts{#1}%
+ \csname assignfonts#1\endcsname
\resetmathfonts
\setleading{#4}%
}}
@@ -2645,9 +2657,16 @@ end
% Check if we are currently using a typewriter font. Since all the
% Computer Modern typewriter fonts have zero interword stretch (and
% shrink), and it is reasonable to expect all typewriter fonts to have
-% this property, we can check that font parameter.
-%
-\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
+% this property, we can check that font parameter. #1 is what to
+% print if we are indeed using \tt; #2 is what to print otherwise.
+\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
+
+% Same as above, but check for italic font. Actually this also catches
+% non-italic slanted fonts since it is impossible to distinguish them from
+% italic fonts. But since this is only used by $ and it uses \sl anyway
+% this is not a problem.
+\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
+
% Check if internal flag is clear, i.e. has not been @set.
\def\ifflagclear#1#2#3{%
@@ -2655,8 +2674,6 @@ end
#2\else#3\fi
}
-
-
{
\catcode`\'=\active
\catcode`\`=\active
@@ -2664,6 +2681,7 @@ end
\gdef\setcodequotes{\let`\codequoteleft \let'\codequoteright}
\gdef\setregularquotes{\let`\lq \let'\rq}
}
+\setregularquotes
% Allow an option to not use regular directed right quote/apostrophe
% (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
@@ -2672,33 +2690,28 @@ end
% lilypond developers report. xpdf does work with the regular 0x27.
%
\def\codequoteright{%
- \ifmonospace
- \ifflagclear{txicodequoteundirected}{%
- \ifflagclear{codequoteundirected}{%
- '%
- }{\char'15 }%
- }{\char'15 }%
- \else
- '%
- \fi
+ \ifusingtt
+ {\ifflagclear{txicodequoteundirected}%
+ {\ifflagclear{codequoteundirected}%
+ {'}%
+ {\char'15 }}%
+ {\char'15 }}%
+ {'}%
}
-%
+
% and a similar option for the left quote char vs. a grave accent.
% Modern fonts display ASCII 0x60 as a grave accent, so some people like
% the code environments to do likewise.
+% \relax disables Spanish ligatures ?` and !` of \tt font.
%
\def\codequoteleft{%
- \ifmonospace
- \ifflagclear{txicodequotebacktick}{%
- \ifflagclear{codequotebacktick}{%
- % [Knuth] pp. 380,381,391
- % \relax disables Spanish ligatures ?` and !` of \tt font.
- \relax`%
- }{\char'22 }%
- }{\char'22 }%
- \else
- \relax`%
- \fi
+ \ifusingtt
+ {\ifflagclear{txicodequotebacktick}%
+ {\ifflagclear{codequotebacktick}%
+ {\relax`}%
+ {\char'22 }}%
+ {\char'22 }}%
+ {\relax`}%
}
% Commands to set the quote options.
@@ -2810,12 +2823,8 @@ end
% @sansserif, explicit sans.
\def\sansserif#1{{\sf #1}}
-% We can't just use \exhyphenpenalty, because that only has effect at
-% the end of a paragraph. Restore normal hyphenation at the end of the
-% group within which \nohyphenation is presumably called.
-%
-\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
-\def\restorehyphenation{\hyphenchar\font = `- }
+\newif\iffrenchspacing
+\frenchspacingfalse
% Set sfcode to normal for the chars that usually have another value.
% Can't use plain's \frenchspacing because it uses the `\x notation, and
@@ -2823,14 +2832,20 @@ end
%
\catcode`@=11
\def\plainfrenchspacing{%
- \sfcode`\.=\@m \sfcode`\?=\@m \sfcode`\!=\@m
- \sfcode`\:=\@m \sfcode`\;=\@m \sfcode`\,=\@m
- \def\endofsentencespacefactor{1000}% for @. and friends
+ \iffrenchspacing\else
+ \frenchspacingtrue
+ \sfcode`\.=\@m \sfcode`\?=\@m \sfcode`\!=\@m
+ \sfcode`\:=\@m \sfcode`\;=\@m \sfcode`\,=\@m
+ \def\endofsentencespacefactor{1000}% for @. and friends
+ \fi
}
\def\plainnonfrenchspacing{%
- \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
- \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
- \def\endofsentencespacefactor{3000}% for @. and friends
+ \iffrenchspacing
+ \frenchspacingfalse
+ \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
+ \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
+ \def\endofsentencespacefactor{3000}% for @. and friends
+ \fi
}
\catcode`@=\other
\def\endofsentencespacefactor{3000}% default
@@ -2876,27 +2891,29 @@ end
% Switch to typewriter.
\tt
%
- % But `\ ' produces the large typewriter interword space.
+ % `\ ' produces the large typewriter interword space.
\def\ {{\spaceskip = 0pt{} }}%
%
- % Turn off hyphenation.
- \nohyphenation
- %
\plainfrenchspacing
#1%
}%
\null % reset spacefactor to 1000
}
-% We *must* turn on hyphenation at `-' and `_' in @code.
-% (But see \codedashfinish below.)
+% This is for LuaTeX: It is not sufficient to disable hyphenation at
+% explicit dashes by setting `\hyphenchar` to -1.
+\def\dashnobreak{%
+ \normaldash
+ \penalty 10000 }
+
+% We must turn on hyphenation at `-' and `_' in @code.
% Otherwise, it is too hard to avoid overfull hboxes
% in the Emacs manual, the Library manual, etc.
+% We explicitly allow hyphenation at these characters
+% using \discretionary.
%
-% Unfortunately, TeX uses one parameter (\hyphenchar) to control
-% both hyphenation at - and hyphenation within words.
-% We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate at a dash. -- rms.
+% Hyphenation at - and hyphenation within words was turned off
+% by default for the tt fonts using the \hyphenchar parameter of TeX.
{
\catcode`\-=\active \catcode`\_=\active
\catcode`\'=\active \catcode`\`=\active
@@ -2909,7 +2926,7 @@ end
\let-\codedash
\let_\codeunder
\else
- \let-\normaldash
+ \let-\dashnobreak
\let_\realunder
\fi
% Given -foo (with a single dash), we do not want to allow a break
@@ -3186,7 +3203,7 @@ end
% definition of @key with no lozenge.
%
-\def\key#1{{\setregularquotes \nohyphenation \tt #1}\null}
+\def\key#1{{\setregularquotes \tt #1}\null}
% @clicksequence{File @click{} Open ...}
\def\clicksequence#1{\begingroup #1\endgroup}
@@ -3389,8 +3406,8 @@ $$%
\let\atchar=\@
% @{ @} @lbracechar{} @rbracechar{} all generate brace characters.
-\def\lbracechar{{\ifmonospace\char123\else\ensuremath\lbrace\fi}}
-\def\rbracechar{{\ifmonospace\char125\else\ensuremath\rbrace\fi}}
+\def\lbracechar{{\ifusingtt{\char123}{\ensuremath\lbrace}}}
+\def\rbracechar{{\ifusingtt{\char125}{\ensuremath\rbrace}}}
\let\{=\lbracechar
\let\}=\rbracechar
@@ -3537,7 +3554,7 @@ $$%
% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
%
-\def\pounds{\ifmonospace{\ecfont\char"BF}\else{\it\$}\fi}
+\def\pounds{{\ifusingtt{\ecfont\char"BF}{\it\$}}}
% @euro{} comes from a separate font, depending on the current style.
% We use the free feym* fonts from the eurosym package by Henrik
@@ -3651,18 +3668,17 @@ $$%
% hopefully nobody will notice/care.
\edef\ecsize{\csname\curfontsize ecsize\endcsname}%
\edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
- \ifmonospace
- % typewriter:
- \font\thisecfont = #1ctt\ecsize \space at \nominalsize
- \else
- \ifx\curfontstyle\bfstylename
- % bold:
- \font\thisecfont = #1cb\ifusingit{i}{x}\ecsize \space at \nominalsize
- \else
- % regular:
- \font\thisecfont = #1c\ifusingit{ti}{rm}\ecsize \space at \nominalsize
- \fi
- \fi
+ \ifusingtt
+ % typewriter:
+ {\font\thisecfont = #1ctt\ecsize \space at \nominalsize}%
+ % else
+ {\ifx\curfontstyle\bfstylename
+ % bold:
+ \font\thisecfont = #1cb\ifusingit{i}{x}\ecsize \space at \nominalsize
+ \else
+ % regular:
+ \font\thisecfont = #1c\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+ \fi}%
\thisecfont
}
@@ -3678,7 +3694,10 @@ $$%
% @textdegree - the normal degrees sign.
%
-\def\textdegree{$^\circ$}
+\def\textdegree{%
+ \ifmmode ^\circ
+ \else {\tcfont \char 176}%
+ \fi}
% Laurent Siebenmann reports \Orb undefined with:
% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38
@@ -3695,11 +3714,11 @@ $$%
% only change font for tt for correct kerning and to avoid using
% \ecfont unless necessary.
\def\quotedblleft{%
- \ifmonospace{\ecfont\char"10}\else{\char"5C}\fi
+ \ifusingtt{{\ecfont\char"10}}{{\char"5C}}%
}
\def\quotedblright{%
- \ifmonospace{\ecfont\char"11}\else{\char`\"}\fi
+ \ifusingtt{{\ecfont\char"11}}{{\char`\"}}%
}
@@ -3724,13 +3743,14 @@ $$%
want the contents after the title page.}}%
\parseargdef\shorttitlepage{%
- \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}%
- \endgroup\page\hbox{}\page}
+ {\headingsoff \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+ \endgroup\page\hbox{}\page}\pageone}
\envdef\titlepage{%
% Open one extra group, as we want to close it in the middle of \Etitlepage.
\begingroup
\parindent=0pt \textfonts
+ \headingsoff
% Leave some space at the very top of the page.
\vglue\titlepagetopglue
% No rule at page bottom unless we print one at the top with @title.
@@ -3758,11 +3778,9 @@ $$%
% If we use the new definition of \page, we always get a blank page
% after the title page, which we certainly don't want.
\oldpage
+ \pageone
\endgroup
%
- % Need this before the \...aftertitlepage checks so that if they are
- % in effect the toc pages will come out with page numbers.
- \HEADINGSon
}
\def\finishtitlepage{%
@@ -3931,7 +3949,6 @@ $$%
}
\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting
-\HEADINGSoff % it's the default
% When we turn headings on, set the page number to 1.
\def\pageone{
@@ -3955,7 +3972,7 @@ $$%
\pageone
\HEADINGSsinglex
}
-\def\HEADINGSon{\HEADINGSdouble}
+% \def\HEADINGSon{\HEADINGSdouble} % defined by \CHAPPAGon
\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
\let\HEADINGSdoubleafter=\HEADINGSafter
@@ -4777,21 +4794,6 @@ $$%
\def\docodeindexxxx #1{\docind{\indexname}{#1}}
-% Used for the aux, toc and index files to prevent expansion of Texinfo
-% commands.
-%
-\def\atdummies{%
- \definedummyletter\@%
- \definedummyletter\ %
- \definedummyletter\{%
- \definedummyletter\}%
- \definedummyletter\&%
- %
- % Do the redefinitions.
- \definedummies
- \otherbackslash
-}
-
% \definedummyword defines \#1 as \string\#1\space, thus effectively
% preventing its expansion. This is used only for control words,
% not control letters, because the \space would be incorrect for
@@ -4807,110 +4809,91 @@ $$%
%
\def\definedummyword #1{\def#1{\string#1\space}}%
\def\definedummyletter#1{\def#1{\string#1}}%
-\let\definedummyaccent\definedummyletter
-% Called from \atdummies to prevent the expansion of commands.
+% Used for the aux, toc and index files to prevent expansion of Texinfo
+% commands. Most of the commands are controlled through the
+% \ifdummies conditional.
%
-\def\definedummies{%
+\def\atdummies{%
+ \dummiestrue
%
- \let\commondummyword\definedummyword
- \let\commondummyletter\definedummyletter
- \let\commondummyaccent\definedummyaccent
- \commondummiesnofonts
+ \definedummyletter\@%
+ \definedummyletter\ %
+ \definedummyletter\{%
+ \definedummyletter\}%
+ \definedummyletter\&%
%
\definedummyletter\_%
\definedummyletter\-%
%
- % Non-English letters.
- \definedummyword\AA
- \definedummyword\AE
- \definedummyword\DH
- \definedummyword\L
- \definedummyword\O
- \definedummyword\OE
- \definedummyword\TH
- \definedummyword\aa
- \definedummyword\ae
- \definedummyword\dh
- \definedummyword\exclamdown
- \definedummyword\l
- \definedummyword\o
- \definedummyword\oe
- \definedummyword\ordf
- \definedummyword\ordm
- \definedummyword\questiondown
- \definedummyword\ss
- \definedummyword\th
- %
- % Although these internal commands shouldn't show up, sometimes they do.
- \definedummyword\bf
- \definedummyword\gtr
- \definedummyword\hat
- \definedummyword\less
- \definedummyword\sf
- \definedummyword\sl
- \definedummyword\tclose
- \definedummyword\tt
- %
- \definedummyword\LaTeX
- \definedummyword\TeX
- %
- % Assorted special characters.
- \definedummyword\ampchar
- \definedummyword\atchar
- \definedummyword\arrow
- \definedummyword\backslashchar
- \definedummyword\bullet
- \definedummyword\comma
- \definedummyword\copyright
- \definedummyword\registeredsymbol
- \definedummyword\dots
- \definedummyword\enddots
- \definedummyword\entrybreak
- \definedummyword\equiv
- \definedummyword\error
- \definedummyword\euro
- \definedummyword\expansion
- \definedummyword\geq
- \definedummyword\guillemetleft
- \definedummyword\guillemetright
- \definedummyword\guilsinglleft
- \definedummyword\guilsinglright
- \definedummyword\lbracechar
- \definedummyword\leq
- \definedummyword\mathopsup
- \definedummyword\minus
- \definedummyword\ogonek
- \definedummyword\pounds
- \definedummyword\point
- \definedummyword\print
- \definedummyword\quotedblbase
- \definedummyword\quotedblleft
- \definedummyword\quotedblright
- \definedummyword\quoteleft
- \definedummyword\quoteright
- \definedummyword\quotesinglbase
- \definedummyword\rbracechar
- \definedummyword\result
- \definedummyword\sub
- \definedummyword\sup
- \definedummyword\textdegree
- %
\definedummyword\subentry
%
% We want to disable all macros so that they are not expanded by \write.
+ \let\commondummyword\definedummyword
\macrolist
\let\value\dummyvalue
%
- \normalturnoffactive
-}
-
-% \commondummiesnofonts: common to \definedummies and \indexnofonts.
-% Define \commondummyletter, \commondummyaccent and \commondummyword before
-% using. Used for accents, font commands, and various control letters.
-%
-\def\commondummiesnofonts{%
- % Control letters and accents.
+ \turnoffactive
+}
+
+\newif\ifdummies
+\newif\ifindexnofonts
+
+\def\commondummyletter#1{%
+ \expandafter\let\csname\string#1:impl\endcsname#1%
+ \edef#1{%
+ \noexpand\ifindexnofonts
+ % empty expansion
+ \noexpand\else
+ \noexpand\ifdummies\string#1%
+ \noexpand\else
+ \noexpand\jumptwofi % dispose of the \fi
+ \expandafter\noexpand\csname\string#1:impl\endcsname
+ \noexpand\fi
+ \noexpand\fi}%
+}
+
+\def\commondummyaccent#1{%
+ \expandafter\let\csname\string#1:impl\endcsname#1%
+ \edef#1{%
+ \noexpand\ifindexnofonts
+ \noexpand\expandafter % dispose of \else ... \fi
+ \noexpand\asis
+ \noexpand\else
+ \noexpand\ifdummies\string#1%
+ \noexpand\else
+ \noexpand\jumptwofi % dispose of the \fi
+ \expandafter\noexpand\csname\string#1:impl\endcsname
+ \noexpand\fi
+ \noexpand\fi}%
+}
+
+% Like \commondummyaccent but add a \space at the end of the dummy expansion
+% #2 is the expansion used for \indexnofonts. #2 is always followed by
+% \asis to remove a pair of following braces.
+\def\commondummyword#1#2{%
+ \expandafter\let\csname\string#1:impl\endcsname#1%
+ \expandafter\def\csname\string#1:ixnf\endcsname{#2\asis}%
+ \edef#1{%
+ \noexpand\ifindexnofonts
+ \noexpand\expandafter % dispose of \else ... \fi
+ \expandafter\noexpand\csname\string#1:ixnf\endcsname
+ \noexpand\else
+ \noexpand\ifdummies\string#1\space
+ \noexpand\else
+ \noexpand\jumptwofi % dispose of the \fi \fi
+ \expandafter\noexpand\csname\string#1:impl\endcsname
+ \noexpand\fi
+ \noexpand\fi}%
+}
+\def\jumptwofi#1\fi\fi{\fi\fi#1}
+
+% For \atdummies and \indexnofonts. \atdummies sets
+% \dummiestrue and \indexnofonts sets \indexnofontstrue.
+\def\definedummies{
+ % @-sign is always an escape character when reading auxiliary files
+ \escapechar = `\@
+ %
\commondummyletter\!%
\commondummyaccent\"%
\commondummyaccent\'%
@@ -4924,58 +4907,123 @@ $$%
\commondummyaccent\^%
\commondummyaccent\`%
\commondummyaccent\~%
- \commondummyword\u
- \commondummyword\v
- \commondummyword\H
- \commondummyword\dotaccent
- \commondummyword\ogonek
- \commondummyword\ringaccent
- \commondummyword\tieaccent
- \commondummyword\ubaraccent
- \commondummyword\udotaccent
- \commondummyword\dotless
+ %
+ % Control letters and accents.
+ \commondummyword\u {}%
+ \commondummyword\v {}%
+ \commondummyword\H {}%
+ \commondummyword\dotaccent {}%
+ \commondummyword\ogonek {}%
+ \commondummyword\ringaccent {}%
+ \commondummyword\tieaccent {}%
+ \commondummyword\ubaraccent {}%
+ \commondummyword\udotaccent {}%
+ \commondummyword\dotless {}%
%
% Texinfo font commands.
- \commondummyword\b
- \commondummyword\i
- \commondummyword\r
- \commondummyword\sansserif
- \commondummyword\sc
- \commondummyword\slanted
- \commondummyword\t
+ \commondummyword\b {}%
+ \commondummyword\i {}%
+ \commondummyword\r {}%
+ \commondummyword\sansserif {}%
+ \commondummyword\sc {}%
+ \commondummyword\slanted {}%
+ \commondummyword\t {}%
%
% Commands that take arguments.
- \commondummyword\abbr
- \commondummyword\acronym
- \commondummyword\anchor
- \commondummyword\cite
- \commondummyword\code
- \commondummyword\command
- \commondummyword\dfn
- \commondummyword\dmn
- \commondummyword\email
- \commondummyword\emph
- \commondummyword\env
- \commondummyword\file
- \commondummyword\image
- \commondummyword\indicateurl
- \commondummyword\inforef
- \commondummyword\kbd
- \commondummyword\key
- \commondummyword\math
- \commondummyword\option
- \commondummyword\pxref
- \commondummyword\ref
- \commondummyword\samp
- \commondummyword\strong
- \commondummyword\tie
- \commondummyword\U
- \commondummyword\uref
- \commondummyword\url
- \commondummyword\var
- \commondummyword\verb
- \commondummyword\w
- \commondummyword\xref
+ \commondummyword\abbr {}%
+ \commondummyword\acronym {}%
+ \commondummyword\anchor {}%
+ \commondummyword\cite {}%
+ \commondummyword\code {}%
+ \commondummyword\command {}%
+ \commondummyword\dfn {}%
+ \commondummyword\dmn {}%
+ \commondummyword\email {}%
+ \commondummyword\emph {}%
+ \commondummyword\env {}%
+ \commondummyword\file {}%
+ \commondummyword\image {}%
+ \commondummyword\indicateurl{}%
+ \commondummyword\inforef {}%
+ \commondummyword\kbd {}%
+ \commondummyword\key {}%
+ \commondummyword\math {}%
+ \commondummyword\option {}%
+ \commondummyword\pxref {}%
+ \commondummyword\ref {}%
+ \commondummyword\samp {}%
+ \commondummyword\strong {}%
+ \commondummyword\tie {}%
+ \commondummyword\U {}%
+ \commondummyword\uref {}%
+ \commondummyword\url {}%
+ \commondummyword\var {}%
+ \commondummyword\verb {}%
+ \commondummyword\w {}%
+ \commondummyword\xref {}%
+ %
+ \commondummyword\AA {AA}%
+ \commondummyword\AE {AE}%
+ \commondummyword\DH {DZZ}%
+ \commondummyword\L {L}%
+ \commondummyword\O {O}%
+ \commondummyword\OE {OE}%
+ \commondummyword\TH {TH}%
+ \commondummyword\aa {aa}%
+ \commondummyword\ae {ae}%
+ \commondummyword\dh {dzz}%
+ \commondummyword\exclamdown {!}%
+ \commondummyword\l {l}%
+ \commondummyword\o {o}%
+ \commondummyword\oe {oe}%
+ \commondummyword\ordf {a}%
+ \commondummyword\ordm {o}%
+ \commondummyword\questiondown {?}%
+ \commondummyword\ss {ss}%
+ \commondummyword\th {th}%
+ %
+ \commondummyword\LaTeX {LaTeX}%
+ \commondummyword\TeX {TeX}%
+ %
+ % Assorted special characters.
+ \commondummyword\ampchar {\normalamp}%
+ \commondummyword\atchar {\@}%
+ \commondummyword\arrow {->}%
+ \commondummyword\backslashchar {}%
+ \commondummyword\bullet {bullet}%
+ \commondummyword\comma {,}%
+ \commondummyword\copyright {copyright}%
+ \commondummyword\dots {...}%
+ \commondummyword\enddots {...}%
+ \commondummyword\entrybreak {}%
+ \commondummyword\equiv {===}%
+ \commondummyword\error {error}%
+ \commondummyword\euro {euro}%
+ \commondummyword\expansion {==>}%
+ \commondummyword\geq {>=}%
+ \commondummyword\guillemetleft {<<}%
+ \commondummyword\guillemetright {>>}%
+ \commondummyword\guilsinglleft {<}%
+ \commondummyword\guilsinglright {>}%
+ \commondummyword\lbracechar {\{}%
+ \commondummyword\leq {<=}%
+ \commondummyword\mathopsup {sup}%
+ \commondummyword\minus {-}%
+ \commondummyword\pounds {pounds}%
+ \commondummyword\point {.}%
+ \commondummyword\print {-|}%
+ \commondummyword\quotedblbase {"}%
+ \commondummyword\quotedblleft {"}%
+ \commondummyword\quotedblright {"}%
+ \commondummyword\quoteleft {`}%
+ \commondummyword\quoteright {'}%
+ \commondummyword\quotesinglbase {,}%
+ \commondummyword\rbracechar {\}}%
+ \commondummyword\registeredsymbol {R}%
+ \commondummyword\result {=>}%
+ \commondummyword\sub {}%
+ \commondummyword\sup {}%
+ \commondummyword\textdegree {o}%
}
\let\indexlbrace\relax
@@ -5026,18 +5074,7 @@ $$%
% would be for a given command (usually its argument).
%
\def\indexnofonts{%
- % Accent commands should become @asis.
- \def\commondummyaccent##1{\let##1\asis}%
- % We can just ignore other control letters.
- \def\commondummyletter##1{\let##1\empty}%
- % All control words become @asis by default; overrides below.
- \let\commondummyword\commondummyaccent
- \commondummiesnofonts
- %
- % Don't no-op \tt, since it isn't a user-level command
- % and is used in the definitions of the active chars like <, >, |, etc.
- % Likewise with the other plain tex font commands.
- %\let\tt=\asis
+ \indexnofontstrue
%
\def\ { }%
\def\@{@}%
@@ -5049,65 +5086,6 @@ $$%
\let\lbracechar\{%
\let\rbracechar\}%
%
- % Non-English letters.
- \def\AA{AA}%
- \def\AE{AE}%
- \def\DH{DZZ}%
- \def\L{L}%
- \def\OE{OE}%
- \def\O{O}%
- \def\TH{TH}%
- \def\aa{aa}%
- \def\ae{ae}%
- \def\dh{dzz}%
- \def\exclamdown{!}%
- \def\l{l}%
- \def\oe{oe}%
- \def\ordf{a}%
- \def\ordm{o}%
- \def\o{o}%
- \def\questiondown{?}%
- \def\ss{ss}%
- \def\th{th}%
- %
- \let\do\indexnofontsdef
- %
- \do\LaTeX{LaTeX}%
- \do\TeX{TeX}%
- %
- % Assorted special characters.
- \do\atchar{@}%
- \do\arrow{->}%
- \do\bullet{bullet}%
- \do\comma{,}%
- \do\copyright{copyright}%
- \do\dots{...}%
- \do\enddots{...}%
- \do\equiv{==}%
- \do\error{error}%
- \do\euro{euro}%
- \do\expansion{==>}%
- \do\geq{>=}%
- \do\guillemetleft{<<}%
- \do\guillemetright{>>}%
- \do\guilsinglleft{<}%
- \do\guilsinglright{>}%
- \do\leq{<=}%
- \do\lbracechar{\{}%
- \do\minus{-}%
- \do\point{.}%
- \do\pounds{pounds}%
- \do\print{-|}%
- \do\quotedblbase{"}%
- \do\quotedblleft{"}%
- \do\quotedblright{"}%
- \do\quoteleft{`}%
- \do\quoteright{'}%
- \do\quotesinglbase{,}%
- \do\rbracechar{\}}%
- \do\registeredsymbol{R}%
- \do\result{=>}%
- \do\textdegree{o}%
%
% We need to get rid of all macros, leaving only the arguments (if present).
% Of course this is not nearly correct, but it is the best we can do for now.
@@ -5119,14 +5097,11 @@ $$%
% to take a single TeX argument. The case of a macro invocation that
% goes to end-of-line is not handled.
%
+ \def\commondummyword##1{\let##1\asis}%
\macrolist
\let\value\indexnofontsvalue
}
-% Give the control sequence a definition that removes the {} that follows
-% its use, e.g. @AA{} -> AA
-\def\indexnofontsdef#1#2{\def#1##1{#2}}%
-
@@ -5257,7 +5232,10 @@ $$%
\xdef\trimmed{\segment}%
\xdef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}%
\xdef\indexsortkey{\trimmed}%
- \ifx\indexsortkey\empty\xdef\indexsortkey{ }\fi
+ \ifx\indexsortkey\empty
+ \message{Empty index sort key near line \the\inputlineno}%
+ \xdef\indexsortkey{ }%
+ \fi
}\fi
%
% Append to \fullindexsortkey.
@@ -5597,6 +5575,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\newdimen\entryrightmargin
\entryrightmargin=0pt
+% for PDF output, whether to make the text of the entry a link to the page
+% number. set for @contents and @shortcontents where there is only one
+% page number.
+\newif\iflinkentrytext
+
% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
% then page number (#2) flushed to the right margin. It is used for index
% and table of contents entries. The paragraph is indented by \leftskip.
@@ -5623,7 +5606,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
\def\entrybreak{\unskip\space\ignorespaces}%
\def\doentry{%
- % Save the text of the entry
+ % Save the text of the entry in \boxA
\global\setbox\boxA=\hbox\bgroup
\bgroup % Instead of the swallowed brace.
\noindent
@@ -5633,12 +5616,21 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% with catcodes occurring.
}
{\catcode`\@=11
+% #1 is the page number
\gdef\finishentry#1{%
- \egroup % end box A
+ \egroup % end \boxA
\dimen@ = \wd\boxA % Length of text of entry
+ % add any leaders and page number to \boxA.
\global\setbox\boxA=\hbox\bgroup
- \unhbox\boxA
- % #1 is the page number.
+ \ifpdforxetex
+ \iflinkentrytext
+ \pdflinkpage{#1}{\unhbox\boxA}%
+ \else
+ \unhbox\boxA
+ \fi
+ \else
+ \unhbox\boxA
+ \fi
%
% Get the width of the page numbers, and only use
% leaders if they are present.
@@ -5657,6 +5649,8 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi
\fi
\egroup % end \boxA
+ %
+ % now output
\ifdim\wd\boxB = 0pt
\noindent\unhbox\boxA\par
\nobreak
@@ -6356,7 +6350,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi
}
-\parseargdef\setchapternewpage{\csname CHAPPAG#1\endcsname}
+\parseargdef\setchapternewpage{\csname CHAPPAG#1\endcsname\HEADINGSon}
\def\CHAPPAGoff{%
\global\let\contentsalignmacro = \chappager
@@ -6373,7 +6367,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\global\let\pchapsepmacro=\chapoddpage
\global\def\HEADINGSon{\HEADINGSdouble}}
-\CHAPPAGon
+\setchapternewpage on
% \chapmacro - Chapter opening.
%
@@ -6386,6 +6380,16 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\def\Yappendixkeyword{Yappendix}
\def\Yomitfromtockeyword{Yomitfromtoc}
%
+%
+% Definitions for @thischapter. These can be overridden in translation
+% files.
+\def\thischapterAppendix{%
+ \putwordAppendix{} \thischapternum: \thischaptername}
+
+\def\thischapterChapter{%
+ \putwordChapter{} \thischapternum: \thischaptername}
+%
+%
\def\chapmacro#1#2#3{%
\expandafter\ifx\thisenv\titlepage\else
\checkenv{}% chapters, etc., should not start inside an environment.
@@ -6408,22 +6412,14 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\xdef\currentchapterdefs{%
\gdef\noexpand\thischaptername{\the\toks0}%
\gdef\noexpand\thischapternum{\appendixletter}%
- % \noexpand\putwordAppendix avoids expanding indigestible
- % commands in some of the translations.
- \gdef\noexpand\thischapter{\noexpand\putwordAppendix{}
- \noexpand\thischapternum:
- \noexpand\thischaptername}%
+ \let\noexpand\thischapter\noexpand\thischapterAppendix
}%
\else
\toks0={#1}%
\xdef\currentchapterdefs{%
\gdef\noexpand\thischaptername{\the\toks0}%
\gdef\noexpand\thischapternum{\the\chapno}%
- % \noexpand\putwordChapter avoids expanding indigestible
- % commands in some of the translations.
- \gdef\noexpand\thischapter{\noexpand\putwordChapter{}
- \noexpand\thischapternum:
- \noexpand\thischaptername}%
+ \let\noexpand\thischapter\noexpand\thischapterChapter
}%
\fi\fi\fi
%
@@ -6509,6 +6505,12 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\def\subsubsecheadingskip{\subsecheadingskip}
\def\subsubsecheadingbreak{\subsecheadingbreak}
+% Definition for @thissection. This can be overridden in translation
+% files.
+\def\thissectionDef{%
+ \putwordSection{} \thissectionnum: \thissectionname}
+%
+
% Print any size, any type, section title.
%
@@ -6550,11 +6552,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\xdef\currentsectiondefs{%
\gdef\noexpand\thissectionname{\the\toks0}%
\gdef\noexpand\thissectionnum{#4}%
- % \noexpand\putwordSection avoids expanding indigestible
- % commands in some of the translations.
- \gdef\noexpand\thissection{\noexpand\putwordSection{}
- \noexpand\thissectionnum:
- \noexpand\thissectionname}%
+ \let\noexpand\thissection\noexpand\thissectionDef
}%
\fi
\else
@@ -6563,11 +6561,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\xdef\currentsectiondefs{%
\gdef\noexpand\thissectionname{\the\toks0}%
\gdef\noexpand\thissectionnum{#4}%
- % \noexpand\putwordSection avoids expanding indigestible
- % commands in some of the translations.
- \gdef\noexpand\thissection{\noexpand\putwordSection{}
- \noexpand\thissectionnum:
- \noexpand\thissectionname}%
+ \let\noexpand\thissection\noexpand\thissectionDef
}%
\fi
\fi\fi\fi
@@ -6753,6 +6747,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\def\thistitle{}% no title in double-sided headings
% Record where the Roman numerals started.
\ifnum\romancount=0 \global\romancount=\pagecount \fi
+ \linkentrytexttrue
}
% \raggedbottom in plain.tex hardcodes \topskip so override it
@@ -6880,7 +6875,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Chapters, in the short toc.
% See comments in \dochapentry re vbox and related settings.
\def\shortchapentry#1#2#3#4{%
- \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
+ \tocentry{\shortchaplabel{#2}\labelspace #1}{#4}%
}
% Appendices, in the main contents.
@@ -6895,7 +6890,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Unnumbered chapters.
\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
-\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
+\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{#4}}
% Sections.
\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
@@ -6927,24 +6922,24 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Move the page numbers slightly to the right
\advance\entryrightmargin by -0.05em
\chapentryfonts
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+ \tocentry{#1}{#2}%
\endgroup
\nobreak\vskip .25\baselineskip plus.1\baselineskip
}
\def\dosecentry#1#2{\begingroup
\secentryfonts \leftskip=\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+ \tocentry{#1}{#2}%
\endgroup}
\def\dosubsecentry#1#2{\begingroup
\subsecentryfonts \leftskip=2\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+ \tocentry{#1}{#2}%
\endgroup}
\def\dosubsubsecentry#1#2{\begingroup
\subsubsecentryfonts \leftskip=3\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+ \tocentry{#1}{#2}%
\endgroup}
% We use the same \entry macro as for the index entries.
@@ -6953,9 +6948,6 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Space between chapter (or whatever) number and the title.
\def\labelspace{\hskip1em \relax}
-\def\dopageno#1{{\rm #1}}
-\def\doshortpageno#1{{\rm #1}}
-
\def\chapentryfonts{\secfonts \rm}
\def\secentryfonts{\textfonts}
\def\subsecentryfonts{\textfonts}
@@ -7100,19 +7092,25 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\newdimen\cartouter\newdimen\cartinner
\newskip\normbskip\newskip\normpskip\newskip\normlskip
-
-\envdef\cartouche{%
+\envparseargdef\cartouche{%
\cartouchefontdefs
\ifhmode\par\fi % can't be in the midst of a paragraph.
\startsavinginserts
\lskip=\leftskip \rskip=\rightskip
\leftskip=0pt\rightskip=0pt % we want these *outside*.
+ %
+ % Set paragraph width for text inside cartouche. There are
+ % left and right margins of 3pt each plus two vrules 0.4pt each.
\cartinner=\hsize \advance\cartinner by-\lskip
\advance\cartinner by-\rskip
+ \advance\cartinner by -6.8pt
+ %
+ % For drawing top and bottom of cartouche. Each corner char
+ % adds 6pt and we take off the width of a rule to line up with the
+ % right boundary perfectly.
\cartouter=\hsize
- \advance\cartouter by 18.4pt % allow for 3pt kerns on either
- % side, and for 6pt waste from
- % each corner char, and rule thickness
+ \advance\cartouter by 11.6pt
+ %
\normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
%
% If this cartouche directly follows a sectioning command, we need the
@@ -7124,16 +7122,19 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\baselineskip=0pt\parskip=0pt\lineskip=0pt
\carttop
\hbox\bgroup
- \hskip\lskip
- \vrule\kern3pt
- \vbox\bgroup
- \kern3pt
- \hsize=\cartinner
- \baselineskip=\normbskip
- \lineskip=\normlskip
- \parskip=\normpskip
- \vskip -\parskip
- \comment % For explanation, see the end of def\group.
+ \hskip\lskip
+ \vrule\kern3pt
+ \vbox\bgroup
+ \hsize=\cartinner
+ \baselineskip=\normbskip
+ \lineskip=\normlskip
+ \parskip=\normpskip
+ \def\arg{#1}%
+ \ifx\arg\empty\else
+ \centerV{\hfil \bf #1 \hfil}%
+ \fi
+ \kern3pt
+ \vskip -\parskip
}
\def\Ecartouche{%
\ifhmode\par\fi
@@ -7384,7 +7385,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\endgroup
%
\def\setupverb{%
- \tt % easiest (and conventionally used) font for verbatim
+ \tt
\def\par{\leavevmode\endgraf}%
\setcodequotes
\tabeightspaces
@@ -7561,32 +7562,28 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\exdentamount=\defbodyindent
}
-\def\dodefunx#1{%
- % First, check whether we are in the right environment:
- \checkenv#1%
- %
- % As above, allow line break if we have multiple x headers in a row.
- % It's not a great place, though.
- \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi
- %
- % And now, it's time to reuse the body of the original defun:
- \expandafter\gobbledefun#1%
-}
-\def\gobbledefun#1\startdefun{}
+\newtoks\defidx
+\newtoks\deftext
-% \printdefunline \deffnheader{text}
+\def\useindex#1{\defidx={#1}\ignorespaces}
+
+% Called as \printdefunline \deffooheader{text}
%
\def\printdefunline#1#2{%
\begingroup
\plainfrenchspacing
- % call \deffnheader:
+ % call \deffooheader:
#1#2 \endheader
+ % create the index entry
+ \defcharsdefault
+ \edef\temp{\noexpand\doind{\the\defidx}{\the\deftext}}%
+ \temp
% common ending:
\interlinepenalty = 10000
\advance\rightskip by 0pt plus 1fil\relax
\endgraf
\nobreak\vskip -\parskip
- \penalty\defunpenalty % signal to \startdefun and \dodefunx
+ \penalty\defunpenalty % signal to \startdefun and \deffoox
% Some of the @defun-type tags do not enable magic parentheses,
% rendering the following check redundant. But we don't optimize.
\checkparencounts
@@ -7595,7 +7592,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\def\Edefun{\endgraf\medbreak}
-% \makedefun{deffoo}{ (definition of \deffooheader) }
+% \makedefun{deffoo} (\deffooheader parameters) { (\deffooheader expansion) }
%
% Define \deffoo, \deffoox \Edeffoo and \deffooheader.
\def\makedefun#1{%
@@ -7610,8 +7607,18 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\doingtypefnfalse % distinguish typed functions from all else
\parseargusing\activeparens{\printdefunline#3}%
}%
- \def#2{\dodefunx#1}%
- \def#3%
+ \def#2{%
+ % First, check whether we are in the right environment:
+ \checkenv#1%
+ %
+ % As in \startdefun, allow line break if we have multiple x headers
+ % in a row. It's not a great place, though.
+ \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi
+ %
+ \doingtypefnfalse % distinguish typed functions from all else
+ \parseargusing\activeparens{\printdefunline#3}%
+ }%
+ \def#3% definition of \deffooheader follows
}
\newif\ifdoingtypefn % doing typed function?
@@ -7636,18 +7643,23 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi\fi
}
+\def\defind#1#2{
+ \defidx={#1}%
+ \deftext={#2}%
+}
+
% Untyped functions:
% @deffn category name args
\makedefun{deffn}#1 #2 #3\endheader{%
- \doind{fn}{\code{#2}}%
+ \defind{fn}{\code{#2}}%
\defname{#1}{}{#2}\magicamp\defunargs{#3\unskip}%
}
% @defop category class name args
\makedefun{defop}#1 {\defopheaderx{#1\ \putwordon}}
\def\defopheaderx#1#2 #3 #4\endheader{%
- \doind{fn}{\code{#3}\space\putwordon\ \code{#2}}%
+ \defind{fn}{\code{#3}\space\putwordon\ \code{#2}}%
\defname{#1\ \code{#2}}{}{#3}\magicamp\defunargs{#4\unskip}%
}
@@ -7655,7 +7667,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @deftypefn category type name args
\makedefun{deftypefn}#1 #2 #3 #4\endheader{%
- \doind{fn}{\code{#3}}%
+ \defind{fn}{\code{#3}}%
\doingtypefntrue
\defname{#1}{#2}{#3}\defunargs{#4\unskip}%
}
@@ -7663,7 +7675,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @deftypeop category class type name args
\makedefun{deftypeop}#1 {\deftypeopheaderx{#1\ \putwordon}}
\def\deftypeopheaderx#1#2 #3 #4 #5\endheader{%
- \doind{fn}{\code{#4}\space\putwordon\ \code{#1\ \code{#2}}}%
+ \defind{fn}{\code{#4}\space\putwordon\ \code{#1\ \code{#2}}}%
\doingtypefntrue
\defname{#1\ \code{#2}}{#3}{#4}\defunargs{#5\unskip}%
}
@@ -7672,14 +7684,14 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @deftypevr category type var args
\makedefun{deftypevr}#1 #2 #3 #4\endheader{%
- \doind{vr}{\code{#3}}%
+ \defind{vr}{\code{#3}}%
\defname{#1}{#2}{#3}\defunargs{#4\unskip}%
}
% @deftypecv category class type var args
\makedefun{deftypecv}#1 {\deftypecvheaderx{#1\ \putwordof}}
\def\deftypecvheaderx#1#2 #3 #4 #5\endheader{%
- \doind{vr}{\code{#4}\space\putwordof\ \code{#2}}%
+ \defind{vr}{\code{#4}\space\putwordof\ \code{#2}}%
\defname{#1\ \code{#2}}{#3}{#4}\defunargs{#5\unskip}%
}
@@ -7696,7 +7708,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @deftp category name args
\makedefun{deftp}#1 #2 #3\endheader{%
- \doind{tp}{\code{#2}}%
+ \defind{tp}{\code{#2}}%
\defname{#1}{}{#2}\defunargs{#3\unskip}%
}
@@ -7805,10 +7817,12 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Print arguments. Use slanted for @def*, typewriter for @deftype*.
\def\defunargs#1{%
- \df \ifdoingtypefn \tt \else \sl \fi
- \ifflagclear{txicodevaristt}{}%
- {\def\var##1{{\setregularquotes \ttsl ##1}}}%
- #1%
+ \bgroup
+ \df \ifdoingtypefn \tt \else \sl \fi
+ \ifflagclear{txicodevaristt}{}%
+ {\def\var##1{{\setregularquotes \ttsl ##1}}}%
+ #1%
+ \egroup
}
% We want ()&[] to print specially on the defun line.
@@ -8405,21 +8419,21 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\ifcase\paramno
% 0
\expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup
+ \begingroup
\noexpand\spaceisspace
\noexpand\endlineisspace
\noexpand\expandafter % skip any whitespace after the macro name.
\expandafter\noexpand\csname\the\macname @@@\endcsname}%
\expandafter\xdef\csname\the\macname @@@\endcsname{%
- \egroup
+ \endgroup
\noexpand\scanmacro{\macrobody}}%
\or % 1
\expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup
+ \begingroup
\noexpand\braceorline
\expandafter\noexpand\csname\the\macname @@@\endcsname}%
\expandafter\xdef\csname\the\macname @@@\endcsname##1{%
- \egroup
+ \endgroup
\noexpand\scanmacro{\macrobody}%
}%
\else % at most 9
@@ -8430,7 +8444,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @MACNAME@@@ removes braces surrounding the argument list.
% @MACNAME@@@@ scans the macro body with arguments substituted.
\expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup
+ \begingroup
\noexpand\expandafter % This \expandafter skip any spaces after the
\noexpand\macroargctxt % macro before we change the catcode of space.
\noexpand\expandafter
@@ -8444,7 +8458,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\expandafter\xdef
\expandafter\expandafter
\csname\the\macname @@@@\endcsname\paramlist{%
- \egroup\noexpand\scanmacro{\macrobody}}%
+ \endgroup\noexpand\scanmacro{\macrobody}}%
\else % 10 or more:
\expandafter\xdef\csname\the\macname\endcsname{%
\noexpand\getargvals@{\the\macname}{\argl}%
@@ -8887,11 +8901,10 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\xrefprintnodename\printedrefname
%
\ifflagclear{txiomitxrefpg}{%
- % But we always want a comma and a space:
- ,\space
- %
+ % We always want a comma
+ ,%
% output the `page 3'.
- \turnoffactive \putwordpage\tie\refx{#1-pg}%
+ \turnoffactive \putpageref{#1}%
% Add a , if xref followed by a space
\if\space\noexpand\tokenafterxref ,%
\else\ifx\ \tokenafterxref ,% @TAB
@@ -8907,6 +8920,10 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\endlink
\endgroup}
+% can be overridden in translation files
+\def\putpageref#1{%
+ \space\putwordpage\tie\refx{#1-pg}}
+
% Output a cross-manual xref to #1. Used just above (twice).
%
% Only include the text "Section ``foo'' in" if the foo is neither
@@ -9338,13 +9355,6 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\makevalueexpandable
\ifvmode
\imagevmodetrue
- \else \ifx\centersub\centerV
- % for @center @image, we need a vbox so we can have our vertical space
- \imagevmodetrue
- \vbox\bgroup % vbox has better behavior than vtop here
- \fi\fi
- %
- \ifimagevmode
\medskip
% Usually we'll have text after the image which will insert
% \parskip glue, so insert it here too to equalize the space
@@ -9356,14 +9366,17 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\vtop\bgroup \kern -\capheight \vskip-\parskip
\fi
%
- % Enter horizontal mode so that indentation from an enclosing
- % environment such as @quotation is respected.
- % However, if we're at the top level, we don't want the
- % normal paragraph indentation.
- % On the other hand, if we are in the case of @center @image, we don't
- % want to start a paragraph, which will create a hsize-width box and
- % eradicate the centering.
- \ifx\centersub\centerV \else \imageindent \fi
+ \ifx\centersub\centerV
+ % For @center @image, enter vertical mode and add vertical space
+ % Enter an extra \parskip because @center doesn't add space itself.
+ \vbox\bgroup\vskip\parskip\medskip\vskip\parskip
+ \else
+ % Enter horizontal mode so that indentation from an enclosing
+ % environment such as @quotation is respected.
+ % However, if we're at the top level, we don't want the
+ % normal paragraph indentation.
+ \imageindent
+ \fi
%
% Output the image.
\ifpdf
@@ -9388,7 +9401,10 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\egroup
\medskip % space after a standalone image
\fi
- \ifx\centersub\centerV \egroup \fi
+ \ifx\centersub\centerV % @center @image
+ \medskip
+ \egroup % close \vbox
+ \fi
\endgroup}
@@ -9845,12 +9861,10 @@ directory should work if nowhere else does.}
% For native Unicode handling (XeTeX and LuaTeX)
\nativeunicodechardefs
\else
- % For treating UTF-8 as byte sequences (TeX, eTeX and pdfTeX)
+ % For treating UTF-8 as byte sequences (TeX, eTeX and pdfTeX).
+ % Since we already invoke \utfeightchardefs at the top level,
+ % making non-ascii chars active is sufficient.
\setnonasciicharscatcode\active
- % since we already invoked \utfeightchardefs at the top level
- % (below), do not re-invoke it, otherwise our check for duplicated
- % definitions gets triggered. Making non-ascii chars active is
- % sufficient.
\fi
%
\else
@@ -9875,7 +9889,6 @@ directory should work if nowhere else does.}
\fi
}
-% emacs-page
% A message to be logged when using a character that isn't available
% the default font encoding (OT1).
%
@@ -9884,12 +9897,6 @@ directory should work if nowhere else does.}
% Take account of \c (plain) vs. \, (Texinfo) difference.
\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi}
-% First, make active non-ASCII characters in order for them to be
-% correctly categorized when TeX reads the replacement text of
-% macros containing the character definitions.
-\setnonasciicharscatcode\active
-%
-
\def\gdefchar#1#2{%
\gdef#1{%
\ifpassthroughchars
@@ -9899,8 +9906,14 @@ directory should work if nowhere else does.}
\fi
}}
+\begingroup
+
+% Make non-ASCII characters active for defining the character definition
+% macros.
+\setnonasciicharscatcode\active
+
% Latin1 (ISO-8859-1) character definitions.
-\def\latonechardefs{%
+\gdef\latonechardefs{%
\gdefchar^^a0{\tie}
\gdefchar^^a1{\exclamdown}
\gdefchar^^a2{{\tcfont \char162}} % cent
@@ -10005,7 +10018,7 @@ directory should work if nowhere else does.}
}
% Latin9 (ISO-8859-15) encoding character definitions.
-\def\latninechardefs{%
+\gdef\latninechardefs{%
% Encoding is almost identical to Latin1.
\latonechardefs
%
@@ -10020,7 +10033,7 @@ directory should work if nowhere else does.}
}
% Latin2 (ISO-8859-2) character definitions.
-\def\lattwochardefs{%
+\gdef\lattwochardefs{%
\gdefchar^^a0{\tie}
\gdefchar^^a1{\ogonek{A}}
\gdefchar^^a2{\u{}}
@@ -10038,7 +10051,7 @@ directory should work if nowhere else does.}
\gdefchar^^ae{\v Z}
\gdefchar^^af{\dotaccent Z}
%
- \gdefchar^^b0{\textdegree{}}
+ \gdefchar^^b0{\textdegree}
\gdefchar^^b1{\ogonek{a}}
\gdefchar^^b2{\ogonek{ }}
\gdefchar^^b3{\l}
@@ -10124,6 +10137,8 @@ directory should work if nowhere else does.}
\gdefchar^^ff{\dotaccent{}}
}
+\endgroup % active chars
+
% UTF-8 character definitions.
%
% This code to support UTF-8 is based on LaTeX's utf8.def, with some
@@ -10461,7 +10476,7 @@ directory should work if nowhere else does.}
\DeclareUnicodeCharacter{00AE}{\registeredsymbol{}}%
\DeclareUnicodeCharacter{00AF}{\={ }}%
%
- \DeclareUnicodeCharacter{00B0}{\ringaccent{ }}%
+ \DeclareUnicodeCharacter{00B0}{\textdegree}%
\DeclareUnicodeCharacter{00B1}{\ensuremath\pm}%
\DeclareUnicodeCharacter{00B2}{$^2$}%
\DeclareUnicodeCharacter{00B3}{$^3$}%
@@ -10965,7 +10980,7 @@ directory should work if nowhere else does.}
%
\DeclareUnicodeCharacter{20AC}{\euro{}}%
%
- \DeclareUnicodeCharacter{2192}{\expansion{}}%
+ \DeclareUnicodeCharacter{2192}{\arrow}%
\DeclareUnicodeCharacter{21D2}{\result{}}%
%
% Mathematical symbols
@@ -11176,14 +11191,14 @@ directory should work if nowhere else does.}
\relax
}
-% Define all Unicode characters we know about. This makes UTF-8 the default
-% input encoding and allows @U to work.
+% Define all Unicode characters we know about
\iftxinativeunicodecapable
\nativeunicodechardefsatu
\else
\utfeightchardefs
\fi
+
\message{formatting,}
\newdimen\defaultparindent \defaultparindent = 15pt
@@ -11401,8 +11416,136 @@ directory should work if nowhere else does.}
\hfuzz = 1pt
+\message{microtype,}
+
+% protrusion, from Thanh's protcode.tex.
+\def\mtsetprotcode#1{%
+ \rpcode#1`\!=200 \rpcode#1`\,=700 \rpcode#1`\-=700 \rpcode#1`\.=700
+ \rpcode#1`\;=500 \rpcode#1`\:=500 \rpcode#1`\?=200
+ \rpcode#1`\'=700
+ \rpcode#1 34=500 % ''
+ \rpcode#1 123=300 % --
+ \rpcode#1 124=200 % ---
+ \rpcode#1`\)=50 \rpcode#1`\A=50 \rpcode#1`\F=50 \rpcode#1`\K=50
+ \rpcode#1`\L=50 \rpcode#1`\T=50 \rpcode#1`\V=50 \rpcode#1`\W=50
+ \rpcode#1`\X=50 \rpcode#1`\Y=50 \rpcode#1`\k=50 \rpcode#1`\r=50
+ \rpcode#1`\t=50 \rpcode#1`\v=50 \rpcode#1`\w=50 \rpcode#1`\x=50
+ \rpcode#1`\y=50
+ %
+ \lpcode#1`\`=700
+ \lpcode#1 92=500 % ``
+ \lpcode#1`\(=50 \lpcode#1`\A=50 \lpcode#1`\J=50 \lpcode#1`\T=50
+ \lpcode#1`\V=50 \lpcode#1`\W=50 \lpcode#1`\X=50 \lpcode#1`\Y=50
+ \lpcode#1`\v=50 \lpcode#1`\w=50 \lpcode#1`\x=50 \lpcode#1`\y=0
+ %
+ \mtadjustprotcode#1\relax
+}
+
+\newcount\countC
+\def\mtadjustprotcode#1{%
+ \countC=0
+ \loop
+ \ifcase\lpcode#1\countC\else
+ \mtadjustcp\lpcode#1\countC
+ \fi
+ \ifcase\rpcode#1\countC\else
+ \mtadjustcp\rpcode#1\countC
+ \fi
+ \advance\countC 1
+ \ifnum\countC < 256 \repeat
+}
+
+\newcount\countB
+\def\mtadjustcp#1#2#3{%
+ \setbox\boxA=\hbox{%
+ \ifx#2\font\else#2\fi
+ \char#3}%
+ \countB=\wd\boxA
+ \multiply\countB #1#2#3\relax
+ \divide\countB \fontdimen6 #2\relax
+ #1#2#3=\countB\relax
+}
+
+\ifx\XeTeXrevision\thisisundefined
+ \ifx\luatexversion\thisisundefined
+ \ifpdf % pdfTeX
+ \mtsetprotcode\textrm
+ \def\mtfontexpand#1{\pdffontexpand#1 20 20 1 autoexpand\relax}
+ \else % TeX
+ \def\mtfontexpand#1{}
+ \fi
+ \else % LuaTeX
+ \mtsetprotcode\textrm
+ \def\mtfontexpand#1{\expandglyphsinfont#1 20 20 1\relax}
+ \fi
+\else % XeTeX
+ \mtsetprotcode\textrm
+ \def\mtfontexpand#1{}
+\fi
+
+
+\newif\ifmicrotype
+
+\def\microtypeON{%
+ \microtypetrue
+ %
+ \ifx\XeTeXrevision\thisisundefined
+ \ifx\luatexversion\thisisundefined
+ \ifpdf % pdfTeX
+ \pdfadjustspacing=2
+ \pdfprotrudechars=2
+ \fi
+ \else % LuaTeX
+ \adjustspacing=2
+ \protrudechars=2
+ \fi
+ \else % XeTeX
+ \XeTeXprotrudechars=2
+ \fi
+ %
+ \mtfontexpand\textrm
+ \mtfontexpand\textsl
+ \mtfontexpand\textbf
+}
+
+\def\microtypeOFF{%
+ \microtypefalse
+ %
+ \ifx\XeTeXrevision\thisisundefined
+ \ifx\luatexversion\thisisundefined
+ \ifpdf % pdfTeX
+ \pdfadjustspacing=0
+ \pdfprotrudechars=0
+ \fi
+ \else % LuaTeX
+ \adjustspacing=0
+ \protrudechars=0
+ \fi
+ \else % XeTeX
+ \XeTeXprotrudechars=0
+ \fi
+}
+
+\microtypeOFF
+
+\parseargdef\microtype{%
+ \def\txiarg{#1}%
+ \ifx\txiarg\onword
+ \microtypeON
+ \else\ifx\txiarg\offword
+ \microtypeOFF
+ \else
+ \errhelp = \EMsimple
+ \errmessage{Unknown @microtype option `\txiarg', must be on|off}%
+ \fi\fi
+}
+
+
\message{and turning on texinfo input format.}
+% Make UTF-8 the default encoding.
+\documentencodingzzz{UTF-8}
+
\def^^L{\par} % remove \outer, so ^L can appear in an @comment
\catcode`\^^K = 10 % treat vertical tab as whitespace
@@ -11420,23 +11563,6 @@ directory should work if nowhere else does.}
\catcode`\|=\other \def\normalverticalbar{|}
\catcode`\~=\other \def\normaltilde{~}
-% This macro is used to make a character print one way in \tt
-% (where it can probably be output as-is), and another way in other fonts,
-% where something hairier probably needs to be done.
-%
-% #1 is what to print if we are indeed using \tt; #2 is what to print
-% otherwise. Since all the Computer Modern typewriter fonts have zero
-% interword stretch (and shrink), and it is reasonable to expect all
-% typewriter fonts to have this, we can check that font parameter.
-%
-\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
-
-% Same as above, but check for italic font. Actually this also catches
-% non-italic slanted fonts since it is impossible to distinguish them from
-% italic fonts. But since this is only used by $ and it uses \sl anyway
-% this is not a problem.
-\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
-
% Set catcodes for Texinfo file
% Active characters for printing the wanted glyph.
@@ -11482,23 +11608,32 @@ directory should work if nowhere else does.}
% Used sometimes to turn off (effectively) the active characters even after
% parsing them.
\def\turnoffactive{%
- \normalturnoffactive
+ \passthroughcharstrue
+ \let-=\normaldash
+ \let"=\normaldoublequote
+ \let$=\normaldollar %$ font-lock fix
+ \let+=\normalplus
+ \let<=\normalless
+ \let>=\normalgreater
+ \let^=\normalcaret
+ \let_=\normalunderscore
+ \let|=\normalverticalbar
+ \let~=\normaltilde
\otherbackslash
+ \setregularquotes
+ \unsepspaces
}
-\catcode`\@=0
+% If a .fmt file is being used, characters that might appear in a file
+% name cannot be active until we have parsed the command line.
+% So turn them off again, and have \loadconf turn them back on.
+\catcode`+=\other \catcode`\_=\other
+
% \backslashcurfont outputs one backslash character in current font,
% as in \char`\\.
\global\chardef\backslashcurfont=`\\
-% \realbackslash is an actual character `\' with catcode other.
-{\catcode`\\=\other @gdef@realbackslash{\}}
-
-% In Texinfo, backslash is an active character; it prints the backslash
-% in fixed width font.
-\catcode`\\=\active % @ for escape char from now on.
-
% Print a typewriter backslash. For math mode, we can't simply use
% \backslashcurfont: the story here is that in math mode, the \char
% of \backslashcurfont ends up printing the roman \ from the math symbol
@@ -11508,109 +11643,120 @@ directory should work if nowhere else does.}
% ignored family value; char position "5C). We can't use " for the
% usual hex value because it has already been made active.
-@def@ttbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}}
-@let@backslashchar = @ttbackslash % @backslashchar{} is for user documents.
-
-% \otherbackslash defines an active \ to be a literal `\' character with
-% catcode other.
-@gdef@otherbackslash{@let\=@realbackslash}
-
-% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'.
-%
-{@catcode`- = @active
- @gdef@normalturnoffactive{%
- @passthroughcharstrue
- @let-=@normaldash
- @let"=@normaldoublequote
- @let$=@normaldollar %$ font-lock fix
- @let+=@normalplus
- @let<=@normalless
- @let>=@normalgreater
- @let^=@normalcaret
- @let_=@normalunderscore
- @let|=@normalverticalbar
- @let~=@normaltilde
- @let\=@ttbackslash
- @setregularquotes
- @unsepspaces
- }
-}
+\def\ttbackslash{{\tt \ifmmode \mathchar29020 \else \backslashcurfont \fi}}
+\let\backslashchar = \ttbackslash % \backslashchar{} is for user documents.
-% If a .fmt file is being used, characters that might appear in a file
-% name cannot be active until we have parsed the command line.
-% So turn them off again, and have @fixbackslash turn them back on.
-@catcode`+=@other @catcode`@_=@other
-
-% \enablebackslashhack - allow file to begin `\input texinfo'
-%
-% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
-% That is what \eatinput is for; after that, the `\' should revert to printing
-% a backslash.
-% If the file did not have a `\input texinfo', then it is turned off after
-% the first line; otherwise the first `\' in the file would cause an error.
-% This is used on the very last line of this file, texinfo.tex.
-% We also use @c to call @fixbackslash, in case ends of lines are hidden.
-{
-@catcode`@^=7
-@catcode`@^^M=13@gdef@enablebackslashhack{%
- @global@let\ = @eatinput%
- @catcode`@^^M=13%
- @def@c{@fixbackslash@c}%
- % Definition for the newline at the end of this file.
- @def ^^M{@let^^M@secondlinenl}%
- % Definition for a newline in the main Texinfo file.
- @gdef @secondlinenl{@fixbackslash}%
+% These are made active for url-breaking, so need
+% active definitions as the normal characters.
+\def\normaldot{.}
+\def\normalquest{?}
+\def\normalslash{/}
+
+% \newlinesloadsconf - call \loadconf as soon as possible in the
+% file, e.g. at the first newline.
+%
+{\catcode`\^=7
+\catcode`\^^M=13
+\gdef\newlineloadsconf{%
+ \catcode`\^^M=13 %
+ \newlineloadsconfzz%
+}
+\gdef\newlineloadsconfzz#1^^M{%
+ \def\c{\loadconf\c}%
+ % Definition for the first newline read in the file
+ \def ^^M{\loadconf}%
% In case the first line has a whole-line command on it
- @let@originalparsearg@parsearg
- @def@parsearg{@fixbackslash@originalparsearg}
+ \let\originalparsearg\parsearg%
+ \def\parsearg{\loadconf\originalparsearg}%
}}
-{@catcode`@^=7 @catcode`@^^M=13%
-@gdef@eatinput input texinfo#1^^M{@fixbackslash}}
% Emergency active definition of newline, in case an active newline token
% appears by mistake.
-{@catcode`@^=7 @catcode13=13%
-@gdef@enableemergencynewline{%
- @gdef^^M{%
- @par%
- %<warning: active newline>@par%
+{\catcode`\^=7 \catcode13=13%
+\gdef\enableemergencynewline{%
+ \gdef^^M{%
+ \par%
+ %<warning: active newline>\par%
}}}
-@gdef@fixbackslash{%
- @ifx\@eatinput @let\ = @ttbackslash @fi
- @catcode13=5 % regular end of line
- @enableemergencynewline
- @let@c=@comment
- @let@parsearg@originalparsearg
+% \loadconf gets called at the beginning of every Texinfo file.
+% If texinfo.cnf is present on the system, read it. Useful for site-wide
+% @afourpaper, etc. Not opening texinfo.cnf directly in texinfo.tex
+% makes it possible to make a format file for Texinfo.
+%
+\gdef\loadconf{%
+ \relax % Terminate the filename if running as "tex '&texinfo' FILE.texi".
+ %
+ % Turn off the definitions that trigger \loadconf
+ \everyjobreset
+ \catcode13=5 % regular end of line
+ \enableemergencynewline
+ \let\c=\comment
+ \let\parsearg\originalparsearg
+ %
% Also turn back on active characters that might appear in the input
% file name, in case not using a pre-dumped format.
- @catcode`+=@active
- @catcode`@_=@active
- %
- % If texinfo.cnf is present on the system, read it.
- % Useful for site-wide @afourpaper, etc. This macro, @fixbackslash, gets
- % called at the beginning of every Texinfo file. Not opening texinfo.cnf
- % directly in this file, texinfo.tex, makes it possible to make a format
- % file for Texinfo.
+ \catcode`+=\active
+ \catcode`\_=\active
%
- @openin 1 texinfo.cnf
- @ifeof 1 @else @input texinfo.cnf @fi
- @closein 1
+ \openin 1 texinfo.cnf
+ \ifeof 1 \else \input texinfo.cnf \fi
+ \closein 1
}
+% Redefine some control sequences to be controlled by the \ifdummies
+% and \ifindexnofonts switches. Do this at the end so that the control
+% sequences are all defined.
+\definedummies
+
+
+
+
+\catcode`\@=0
+
+% \realbackslash is an actual character `\' with catcode other.
+{\catcode`\\=\other @gdef@realbackslash{\}}
+
+% In Texinfo, backslash is an active character; it prints the backslash
+% in fixed width font.
+\catcode`\\=\active % @ for escape char from now on.
+
+@let\ = @ttbackslash
+
+% If in a .fmt file, print the version number.
+% \eatinput stops the `\input texinfo' from showing up.
+% After that, `\' should revert to printing a backslash.
+% Turn on active characters that we couldn't do earlier because
+% they might have appeared in the input file name.
+%
+@everyjob{@message{[Texinfo version @texinfoversion]}%
+ @global@let\ = @eatinput
+ @catcode`+=@active @catcode`@_=@active}
+
+{@catcode`@^=7 @catcode`@^^M=13%
+@gdef@eatinput input texinfo#1^^M{@loadconf}}
+
+@def@everyjobreset{@ifx\@eatinput @let\ = @ttbackslash @fi}
+
+% \otherbackslash defines an active \ to be a literal `\' character with
+% catcode other.
+@gdef@otherbackslash{@let\=@realbackslash}
+
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'.
+%
+{@catcode`- = @active
+ @gdef@normalturnoffactive{%
+ @turnoffactive
+ @let\=@ttbackslash
+ }
+}
% Say @foo, not \foo, in error messages.
@escapechar = `@@
-% These (along with & and #) are made active for url-breaking, so need
-% active definitions as the normal characters.
-@def@normaldot{.}
-@def@normalquest{?}
-@def@normalslash{/}
-
% These look ok in all fonts, so just make them not special.
% @hashchar{} gets its own user-level command, because of #line.
@catcode`@& = @other @def@normalamp{&}
@@ -11625,15 +11771,11 @@ directory should work if nowhere else does.}
@c Do this last of all since we use ` in the previous @catcode assignments.
@catcode`@'=@active
@catcode`@`=@active
-@setregularquotes
@c Local variables:
@c eval: (add-hook 'before-save-hook 'time-stamp nil t)
@c time-stamp-pattern: "texinfoversion{%Y-%02m-%02d.%02H}"
-@c page-delimiter: "^\\\\message\\|emacs-page"
+@c page-delimiter: "^\\\\message"
@c End:
-@c vim:sw=2:
-
-@enablebackslashhack
-
+@newlineloadsconf
diff --git a/lib/update-copyright b/lib/update-copyright
index 81b691e85702..ce919bac727f 100755
--- a/lib/update-copyright
+++ b/lib/update-copyright
@@ -3,7 +3,7 @@
# Update an FSF copyright year list to include the current year.
-# Copyright (C) 2009-2022 Free Software Foundation, Inc.
+# Copyright (C) 2009-2023 Free Software Foundation, Inc.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
--
2.39.0
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [bug#60542] [PATCH/committed] maint: Update files from upstream with 'make fetch',
Mike Frysinger <=