[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
ERROR: distcleancheck can only run from a VPATH build
From: |
Dr. David Kirkby |
Subject: |
ERROR: distcleancheck can only run from a VPATH build |
Date: |
Sun, 23 Mar 2003 00:01:33 +0000 |
Hi,
I have written a program 'atlc'
http://atlc.sourceforge.net/
which get distributed with a lot of .bmp example files. If I run
automake ; autoconf ; configure ; make distclean ; configure ; make
distcheck
The 'make distcheck' always fails, with the error message:
ERROR: distcleancheck can only run from a VPATH build
then says:
ERROR: files left in build directory after distclean:
followed by a list of files.
However, those files are in 'EXTRA_DIST' so I would have thought the
fact they are distributed, automake would not try to remove them with
'make distcheck' - is that right ??
I'm not 100% sure what a VPATH build is, but I tried running this from
a build directory that was not the same as where the source files are,
and get the same result.
Here is the output. The Makefile.am is listed at the bottom, in case
someone can see what the hell I'm doing wrong.
automake ; autoconf ; configure ; make distclean ; configure ; make
distcheck
<snip>
rm -f *.o core *.core
rm -f *.tab.c
rm -rf ./.deps
rm -f Makefile
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build/src/non_gui'
Making distclean in .
make[3]: Entering directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build/src'
rm -f Makefile
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build/src'
make[2]: Leaving directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build/src'
Making distclean in .
make[2]: Entering directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build'
test -z "examplestest-coupler2.bmp.txt" || rm -f
examplestest-coupler2.bmp.txt
rm -f Makefile
test -z "examplestest-coupler2.bmp.txt" || rm -f
examplestest-coupler2.bmp.txt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[2]: Leaving directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build'
rm -f config.status config.cache config.log configure.lineno
if test '..' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
test `find . -type f -print | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ;
\
find . -type f -print ; \
exit 1; } >&2
ERROR: files left in build directory after distclean:
./examples/200-Ohm-201b.E.bmp
./examples/200-Ohm-201b.Er.bmp
./examples/200-Ohm-201b.Ex.bmp
./examples/200-Ohm-201b.Ey.bmp
./examples/200-Ohm-201b.U.bmp
./examples/200-Ohm-201b.V.bmp
./examples/25-Ohm-401h.bmp
./examples/25-Ohm-801h.bmp
./examples/aliased.bmp
./examples/an_odd_er.bmp
./examples/bigger_not_in_centre.bmp
./examples/coax-500-100.bmp
./examples/coax-500-200-Er-100.bmp
./examples/coax-500-200.E.bmp
./examples/coax-500-200.Er.bmp
<snip>
./examples/very-odd.bmp
./examples/wide-9pixel.bmp
./examples/README
make[1]: *** [distcleancheck] Error 1
make[1]: Leaving directory
`/export/home/davek/atlc/atlc-4.2.11-alpha/=build'
make: *** [distcheck] Error 2
sparrow /export/home/davek/atlc %
# This is Makefile.am, which is processed by automake
EXTRA_DIST = \
13inner_22outer_coax.bmp.txt \
200-Ohm-201b.E.bmp \
200-Ohm-201b.Er.bmp \
200-Ohm-201b.Ex.bmp \
200-Ohm-201b.Ey.bmp \
200-Ohm-201b.U.bmp \
200-Ohm-201b.V.bmp \
25-Ohm-201b.bm \
25-Ohm-401h.bmp \
25-Ohm-801h.bmp \
Makefile \
Makefile.am \
Makefile.in \
README \
aliased.bmp \
aliased.bmp.txt \
an_odd_er.bmp \
an_odd_er.bmp.txt \
bigger_not_in_centre.bmp \
bigger_not_in_centre.bmp.txt \
coax-500-100.bmp \
coax-500-100.bmp.txt \
coax-500-200-Er-100.bmp \
coax-500-200-Er-100.bmp.txt \
coax-500-200.E.bmp \
coax-500-200.Er.bmp \
coax-500-200.Ex.bmp \
coax-500-200.Ey.bmp \
coax-500-200.U.bmp \
coax-500-200.V.bmp \
coax-500-200.bmp \
coax-500-200.bmp.txt \
coax-500-25.bmp \
coax-500-25.bmp.txt \
coax-500-400.bmp \
coax-500-400.bmp.txt \
coax-500-50.bmp \
coax-500-50.bmp.txt \
coax2.bmp \
coax2.bmp.txt \
coaxtest.bmp \
coaxtest.bmp.txt \
coaxtest2.bmp \
coaxtest2.bmp.txt \
coupler.bmp \
coupler.bmp.txt \
coupler8.bmp.txt \
create_for_Makefile.am \
cvsignore \
eccentric-e.E.bmp \
eccentric-e.Er.bmp \
eccentric-e.Ex.bmp \
eccentric-e.Ey.bmp \
eccentric-e.U.bmp \
eccentric-e.V.bmp \
enclosed-microstrip.bmp \
enclosed-microstrip.bmp.txt \
ex2.bmp \
ex2.bmp.txt \
ground-negative-short.bmp \
ground-negative-short.bmp.txt \
microstrip_coupler.bmp \
mix.bmp \
mix.bmp.txt \
multi-dielectric.bmp \
multi-dielectric.bmp.txt \
not-aliased.bmp \
not-aliased.bmp.txt \
not_in_centre.bmp \
not_in_centre.bmp.txt \
odd-coupler.bmp \
odd-coupler.bmp.txt \
off-centre-coax.bmp \
off-centre-coax.bmp.txt \
offset.bmp \
offset.bmp.txt \
pcb-coupler.bmp \
pcb-coupler.bmp.txt \
pcb.bmp \
pcb.bmp.txt \
positive-ground-short.bmp \
positive-ground-short.bmp.txt \
positive-negative-short.bmp \
positive-negative-short.bmp.txt \
test-coupler1.bmp \
test-coupler1.bmp.txt \
test-coupler2.bmp \
test.bmp \
test.bmp.txt \
test3.bmp \
test3.bmp.txt \
test4.bmp \
test4.bmp.txt \
test5.bmp \
test6.bmp \
test6.bmp.txt \
test7.bmp \
test7.bmp.txt \
twin-wire.bmp \
twin-wire.bmp.txt \
twin-wire2.bmp \
twin-wire2.bmp.txt \
twin-wire3.bmp \
twin-wire3.bmp.txt \
twin-wire4.bmp \
twin-wire4.bmp.txt \
ushape.bmp \
ushape.bmp.txt \
very-odd.bmp \
very-odd.bmp.txt \
wide-9pixel.bmp \
wide-9pixel.bmp.txt
CLEANFILES =
DISTCLEANFILES = eccentric-a.bmp \
13inner_22outer_coax.bmp \
test_sym_strip.bmp \
test_sym_strip.Ex.bin \
test_sym_strip.Ey.bin \
test_sym_strip.E.bin \
test_sym_strip.V.bin \
test_sym_strip.U.bin \
test_sym_strip.Er.bin \
test_sym_strip.Ex.bmp \
test_sym_strip.Ey.bmp \
test_sym_strip.E.bmp \
test_sym_strip.V.bmp \
test_sym_strip.U.bmp \
test_sym_strip.Er.bmp \
test_rect_in_rect.bmp \
test_rect_in_rect.txt \
test_rect_in_rect.Ex.bin \
test_rect_in_rect.Ey.bin \
test_rect_in_rect.E.bin \
test_rect_in_rect.V.bin \
test_rect_in_rect.U.bin \
test_rect_in_rect.Er.bin \
test_rect_in_rect.Ex.bmp \
test_rect_in_rect.Ey.bmp \
test_rect_in_rect.E.bmp \
test_rect_in_rect.V.bmp \
test_rect_in_rect.U.bmp \
test_rect_in_rect.Er.bmp \
coax2.V.bmp \
25ohm-201h.Ex.bmp \
25ohm-201h.Ey.bmp \
25ohm-201h.E.bmp \
25ohm-201h.V.bmp \
25ohm-201h.U.bmp \
25ohm-201h.Er.bmp \
50ohm-201h.Ex.bmp \
50ohm-201h.Ey.bmp \
50ohm-201h.E.bmp \
50ohm-201h.V.bmp \
50ohm-201h.U.bmp \
50ohm-201h.Er.bmp \
eccentric-b.bmp \
eccentric-c.bmp \
eccentric-d.bmp \
eccentric-e.bmp \
eccentric-f.bmp \
eccentric-g.bmp \
eccentric-h.bmp \
eccentric-i.bmp \
eccentric-j.bmp \
eccentric-k.bmp \
eccentric-l.bmp \
eccentric-m.bmp \
eccentric-n.bmp \
25-Ohm-201b.bmp \
25-Ohm-401b.bmp \
50-Ohm-201b.bmp \
50-Ohm-401b.bmp \
100-Ohm-201b.bmp \
100-Ohm-401b.bmp \
200-Ohm-201b.bmp \
200-Ohm-401b.bmp \
200-Ohm-801b.bmp \
coupler1.bmp \
coupler2.bmp \
coupler3.bmp \
coupler4.bmp \
coupler5.bmp \
coupler6.bmp \
coupler7.bmp \
coupler8.bmp \
test-coupler1.E.even.bin \
test-coupler1.E.even.bmp \
test-coupler1.E.odd.bin \
test-coupler1.E.odd.bmp \
test-coupler1.Er.bin \
test-coupler1.Er.bmp \
test-coupler1.Ex.even.bin \
test-coupler1.Ex.even.bmp \
test-coupler1.Ex.odd.bin \
test-coupler1.Ex.odd.bmp \
test-coupler1.Ey.even.bin \
test-coupler1.Ey.even.bmp \
test-coupler1.Ey.odd.bin \
test-coupler1.Ey.odd.bmp \
test-coupler1.U.even.bin \
test-coupler1.U.even.bmp \
test-coupler1.U.odd.bin \
test-coupler1.U.odd.bmp \
test-coupler1.V.even.bin \
test-coupler1.V.even.bmp \
test-coupler1.V.odd.bin \
test-coupler1.V.odd.bmp \
coax2.E.bin \
coax2.Er.bin \
coax2.Ex.bin \
coax2.Ey.bin \
coax2.U.bin \
coax2.V.bin \
pcb.E.bin \
pcb.Er.bin \
pcb.Ex.bin \
pcb.Ey.bin \
pcb.U.bin \
pcb.V.bin \
twin-wire.E.bin \
twin-wire.Er.bin \
twin-wire.Ex.bin \
twin-wire.Ey.bin \
twin-wire.U.bin \
twin-wire.V.bin \
twin-wire.E.bmp \
twin-wire.Er.bmp \
twin-wire.Ex.bmp \
twin-wire.Ey.bmp \
twin-wire.U.bmp \
twin-wire.V.bmp \
ushape.E.bin \
ushape.Er.bin \
ushape.Ex.bin \
ushape.Ey.bin \
ushape.U.bin \
ushape.V.bin \
coax2.Er.bmp \
coax2.Ex.bmp \
coax2.Ey.bmp \
coax2.U.bmp \
coax2.E.bmp \
coax2.E.bmp \
pcb.Er.bmp \
pcb.Ex.bmp \
pcb.Ey.bmp \
pcb.U.bmp \
pcb.V.bmp \
pcb-coupler.E.even.bin \
pcb-coupler.E.odd.bin \
pcb-coupler.Er.bin \
pcb-coupler.Ex.even.bin \
pcb-coupler.Ex.odd.bin \
pcb-coupler.Ey.even.bin \
pcb-coupler.Ey.odd.bin \
pcb-coupler.U.even.bin \
pcb-coupler.U.odd.bin \
pcb-coupler.V.even.bin \
pcb-coupler.V.odd.bin \
pcb-coupler.E.odd.bin \
pcb-coupler.E.odd.bmp \
pcb-coupler.Ex.odd.bin \
pcb-coupler.Ex.odd.bmp \
pcb-coupler.Ey.odd.bin \
pcb-coupler.Ey.odd.bmp \
pcb-coupler.U.odd.bin \
pcb-coupler.U.odd.bmp \
pcb-coupler.V.odd.bin \
pcb-coupler.V.odd.bmp \
pcb-coupler.E.even.bmp \
pcb-coupler.Ex.even.bmp \
pcb-coupler.Ey.even.bmp \
pcb-coupler.U.even.bmp \
pcb-coupler.V.even.bmp \
pcb-coupler.Er.bmp \
test_stripline_coupler.Ex.odd.bmp \
test_stripline_coupler.Ey.odd.bmp \
test_stripline_coupler.E.odd.bmp \
test_stripline_coupler.V.odd.bmp \
test_stripline_coupler.U.odd.bmp \
test_stripline_coupler.Ex.even.bmp \
test_stripline_coupler.Ey.even.bmp \
test_stripline_coupler.E.even.bmp \
test_stripline_coupler.V.even.bmp \
test_stripline_coupler.U.even.bmp \
test_stripline_coupler.Er.bmp \
25ohm-201h.E.bin \
25ohm-201h.Er.bin \
25ohm-201h.Ex.bin \
25ohm-201h.Ey.bin \
25ohm-201h.U.bin \
25ohm-201h.V.bin \
50ohm-201h.E.bin \
50ohm-201h.Er.bin \
50ohm-201h.Ex.bin \
50ohm-201h.Ey.bin \
50ohm-201h.U.bin \
50ohm-201h.V.bin \
test-coupler2.E.even.bin \
test-coupler2.E.odd.bin \
test-coupler2.Er.bin \
test-coupler2.Ex.even.bin \
test-coupler2.Ex.odd.bin \
test-coupler2.Ey.even.bin \
test-coupler2.Ey.odd.bin \
test-coupler2.U.even.bin \
test-coupler2.U.odd.bin \
test-coupler2.V.even.bin \
test-coupler2.V.odd.bin \
test_stripline_coupler.E.even.bin \
test_stripline_coupler.E.odd.bin \
test_stripline_coupler.Er.bin \
test_stripline_coupler.Ex.even.bin \
test_stripline_coupler.Ex.odd.bin \
test_stripline_coupler.Ey.even.bin \
test_stripline_coupler.Ey.odd.bin \
test_stripline_coupler.U.even.bin \
test_stripline_coupler.U.odd.bin \
test_stripline_coupler.V.even.bin \
test_stripline_coupler.V.odd.bin \
test-coupler2.Ex.odd.bmp \
test-coupler2.Ey.odd.bmp \
test-coupler2.E.odd.bmp \
test-coupler2.V.odd.bmp \
test-coupler2.U.odd.bmp \
test-coupler2.Ex.even.bmp \
test-coupler2.Ey.even.bmp \
test-coupler2.E.even.bmp \
test-coupler2.V.even.bmp \
test-coupler2.U.even.bmp \
test-coupler2.Er.bmp \
25ohm-201h.bmp \
25ohm-401h.bmp \
25ohm-801h.bmp \
50ohm-201h.bmp \
50ohm-401h.bmp \
50ohm-801h.bmp \
100ohm-201h.bmp \
100ohm-401h.bmp \
100ohm-801h.bmp \
200ohm-201h.bmp \
200ohm-401h.bmp \
200ohm-801h.bmp \
400ohm-1551h.bmp \
test_stripline_coupler.bmp \
central.bmp \
off-centre2.bmp \
cir.bmp \
test-coupler2.bmp.txt \
test_stripline_coupler.bmp.pre-atlc.txt
--
Dr. David Kirkby,
Senior Research Fellow,
Department of Medical Physics,
University College London,
11-20 Capper St, London, WC1E 6JA.
Tel: 020 7679 6408 Fax: 020 7679 6269
Internal telephone: ext 46408
e-mail address@hidden
- ERROR: distcleancheck can only run from a VPATH build,
Dr. David Kirkby <=