[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Output of the build process

From: Ralf Wildenhues
Subject: Re: Output of the build process
Date: Wed, 29 Nov 2006 16:24:14 +0100
User-agent: Mutt/1.5.13 (2006-11-01)

Hello Dieter,

* Jurzitza, Dieter wrote on Wed, Nov 29, 2006 at 04:13:10PM CET:
> when building and especially testing automake, tons of messages are
> output,

You should be able to avoid all that output by not setting VERBOSE.
Typically, all you will see with a plain 'make check' is:
  PASS: testabc
  PASS: testxyz
  XFAIL: testfoobar

The spurious FAIL outputs you get when verbosely running check4.test
originate in the fact that the check4 test tests testsuites: it ensures
that failing tests are marked as such, for example.  So that output is
there on purpose, so to say.

If you get verbose output on 'make -e check', then consider unsetting
the environment variable VERBOSE.

Hope that helps.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]