[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [avr-chat] Where is the best place forHI a newbie go to for helpwith
From: |
Weddington, Eric |
Subject: |
RE: [avr-chat] Where is the best place forHI a newbie go to for helpwith avrdude? |
Date: |
Tue, 1 Jun 2010 01:54:30 -0600 |
Avrdude project here:
<http://savannah.nongnu.org/projects/avrdude>
It has it's own mailing list.
> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden
> On Behalf Of Nicholas Vradelis
> Sent: Tuesday, June 01, 2010 4:33 AM
> To: address@hidden
> Subject: [avr-chat] Where is the best place forHI a newbie go
> to for helpwith avrdude?
>
>
>
> HI -
>
> This forum looks to be above my level, but I don't know
> where else to go at
> this point.
> I have a mac laptop running macosX 10.4.11, and a
> Usbtiny programmer.
> I'm trying to use them to program Atmega328p
> processors. I've successfully
> programmed an Arduino bootloader using the Usbtiny and
> a Duemilanove board,
> with the Arduino 0018 IDE. Therefore I believe that my
> hardware (up to the
> Atmegaxx8 target board anyway) is good.
>
> I would like to move beyond the Arduino and start
> programming with gcc and libc.
> I've installed avr-gcc and built a .hex file of the
> demo program, but can't get
> avrdude to write to the chip. I started with avrdude
> 5.4, which would recognize the
> Usbtiny but not the m328p processor (so I tried
> programming it as an Atmega168,
> but got an rc= -1 error).
> Then I moved on to avrdude-5.5 which doesn't recognize
> EITHER the Usbtiny OR
> the Atmega328p. I then moved on to avrdude-5.10 with
> exactly the same results.
>
> I keep seeing references to patch files in the various
> forums, but never with an
> source or directions. I looked thru the makefile in
> the avrdude directory and it
> looks as tho the usbtiny.c file is being included in
> the build. The direction pages
> and manuals all stop at running the configure and just
> assume everything will be
> fine.
>
> Could someone point me to a source for low level
> information for someone
> starting from scratch?
>
> Thanks,
>
> nav
>
>
>
>
> ________________________________
>
> The New Busy is not the too busy. Combine all your e-mail
> accounts with Hotmail. Get busy.
> <http://www.windowslive.com/campaign/thenewbusy?tile=multiacco
unt&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4>
>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- RE: [avr-chat] Where is the best place forHI a newbie go to for helpwith avrdude?,
Weddington, Eric <=