[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[avr-gcc-list] [avr-gcc-list]RE: Troubles uploading to a Mega103

From: Eddie Burwell
Subject: [avr-gcc-list] [avr-gcc-list]RE: Troubles uploading to a Mega103
Date: Wed, 28 Mar 2001 11:42:59 -0600

This may or may not be helpful since you laid out your own board. I had some
troubles with the STK300 and uisp. It turned out my printer port must have
internal 1k resistors on the outputs. Because of this my printer port did
not have the umph to drive the lines on the STK300 and thus the logic
voltage levels were out of spec.

Eddie Burwell

reply via email to

[Prev in Thread] Current Thread [Next in Thread]