[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [avr-gcc-list] Student Needs Help With GCC Test 7 (UART) and the ATM

From: John Branthoover
Subject: Re: [avr-gcc-list] Student Needs Help With GCC Test 7 (UART) and the ATMEGA 128.
Date: Thu, 7 Mar 2002 11:16:24 -0800 (PST)

Hello Bernie,
        Thank you for taking the time to answer my question. 
I know that the M103 fuse is not set.  However,  I did
not check if the 1 MHz internal oscillator fuse is
set.  I just assumed the I was using the STK500/501
programmable clock.  I believe that I setup the
jumpers that way.  Any way if it is setup for 1 MHz, 
then that is my problem.  I will check it out tonight
when I get home and let you know.  Thanks again......

--- Bernt Hustad Hembre <address@hidden> wrote:
> On Thu, 7 Mar 2002, John Branthoover wrote:
> > Hello All,
> >      I am a student at Point Park College working
> on
> > my senior project.  I amattempting to use the UART
> on
> > the Atmega 128 with an STK500/501 starter kit with
> no
> > success.
> Check the fuses on ATMega128.
> Be sure that the M103 fuse is NOT set.
> And select the clockoption you are using. Default is
> the internal RC-osc.
> To verify the osc selection use a timer to flash a
> LED every second or
> so. (The RC-osc clockfrequency is ~1MHz).
> Bernie
> Tlf.: 92648923
> address@hidden
> avr-gcc-list at http://avr1.org

Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!
avr-gcc-list at http://avr1.org

reply via email to

[Prev in Thread] Current Thread [Next in Thread]