avr-gcc-list
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[avr-gcc-list] Segmentation Fault - uisp version 20020626


From: Grahame Kelly
Subject: [avr-gcc-list] Segmentation Fault - uisp version 20020626
Date: Wed, 31 Jul 2002 19:08:04 +1000

Hi.

I get the following segmentation fault whenever I get close to 2048 bytes
of flash code upload. as below shows.

/opt/AVR/bin/avr-gcc -c -g  -Os -Wall -Wstrict-prototypes -Wa,-ahlms=2313.lst 
-mmcu=at90s2313 -I. 2313.c -o 2313.o
/opt/AVR/bin/avr-gcc -c -g  -Os -Wall -Wstrict-prototypes -Wa,-ahlms=buart.lst 
-mmcu=at90s2313 -I. buart.c -o buart.o
/opt/AVR/bin/avr-gcc  2313.o buart.o   -Wl,-Map=2313.map,--cref -mmcu=at90s2313 
-o 2313.elf
/opt/AVR/bin/avr-objcopy -O ihex -R .eeprom 2313.elf 2313.obj
/opt/AVR/bin/avr-objcopy -O ihex         -R .eeprom 2313.elf 2313.hex
/opt/AVR/bin/avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" 
--change-section-lma .eeprom=0 -O ihex    2313.elf 2313.eep
/opt/AVR/bin/avr-size 2313.elf
   text    data     bss     dec     hex filename
   2028      28      24    2080     820 2313.elf
Errors: none
rm buart.o


---------------------------------

 uisp -dprog=stk500 -dserial=/dev/ttyS0 -dpart=at90s2313 --erase;
 uisp -dprog=stk500 -dserial=/dev/ttyS0 -dpart=at90s2313 --upload if=./2313.hex;
 uisp -dprog=stk500 -dserial=/dev/ttyS0 -dpart=at90s2313 --verify if=./2313.hex

results in:

Atmel AVR AT90S2313 is found.
Atmel AVR AT90S2313 is found.
Uploading: flash
./goburn2313: line 3:  2939 Segmentation fault     
 uisp -dprog=stk500 -dserial=/dev/ttyS0 -dpart=at90s2313 --upload if=./2313.hex
Atmel AVR AT90S2313 is found.
Verifying: flash

Any way to get every last byte of flash usable ?
Any help much appreciated.

-- 
Cheers. Grahame
avr-gcc-list at http://avr1.org



reply via email to

[Prev in Thread] Current Thread [Next in Thread]