[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[avr-gcc-list] Re: jtagice and avarice not work

From: Theodore Roth
Subject: [avr-gcc-list] Re: jtagice and avarice not work
Date: Wed, 31 Jul 2002 11:53:29 -0600 (MDT)

On Wed, 31 Jul 2002, Klaus Rudolph wrote:

:) Hi Theodore,
:) > That's what I use. I have patched it a bit, but my patches don't affect
:) > the functionality logic.
:) Whats your patches for?

Only for printing out some diagnostic info. I think the patches are
available on the simulavr site.

:) > I have now idea what the firmware in the stk500 or jtagice is. I did have
:) > problems with my setup at home. It didn't work until I hooked the jtagice
:) > up to my girlfriend's windoze box using avr-studio 3.5x to update the
:) > firmware. My setup at work, just worked out of the box.
:) Thats realy a long time ago... :-(

Yup. And unless avr-studio works under wine, I probably won't try anything
newer. ;-)

:) > boards and see if it breaks things with the old firmware.
:) My patch must break things, because there are no switches inside for
:) different firmware versions and some things
:) are absolutly different (universal command for ex.)
:) But there should be no problem to switch with the
:) firmwareversion. But this work must be done...
:) I could do that for the actual firmware, but i have no
:) old firmware board here so testing the backward compatibility
:) must do someone else.

I agree. I just need to sit down and do some work on it. ;-)

Ted Roth

avr-gcc-list at http://avr1.org

reply via email to

[Prev in Thread] Current Thread [Next in Thread]