[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [avr-gcc-list] AVaRICE and gdb windows port

From: Joerg Wunsch
Subject: Re: [avr-gcc-list] AVaRICE and gdb windows port
Date: Tue, 25 Feb 2003 13:56:39 +0100
User-agent: Mutt/1.2.5i

As Marek Michalkiewicz wrote:

> > I've
> > got an old AT90S1200 gambling in a drawer that serves no useful
> > purpose.  I might try turning that into an AVR910 programmer for
> > testing.

> Better use a 2313 - there is pAVR firmware written in C by Jason
> Kyle already available, and I have my own combined pAVR / bootloader
> (sharing the same code for communication protocol) which I really
> should clean up, update for current avr-libc and release someday...

Hmm, too bad, i was in the hope to finally get a real application to
use that old '1200 for. ;-)

The pAVR firmware sounds interesting though, and incidentally, i also
got a '2313 around.

> One problem with this protocol is that it is very slow with large
> devices.

Well, i'd use that AVR910 device mainly for testing, i've already got
a gadget that connects to the parallel port for normal work.  Though,
wrt. the bootloader (which is in particular interesting on the larger
AVRs only), some speedup for a page write operation would indeed seem
useful to me.
J"org Wunsch                                           Unix support engineer
address@hidden        http://www.interface-systems.de/~j/

reply via email to

[Prev in Thread] Current Thread [Next in Thread]