[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] boot vector address for ATMega32 in datasheet correct
Re: [avr-gcc-list] boot vector address for ATMega32 in datasheet correct ?
Thu, 18 Dec 2003 20:38:05 +1100
On Thu, Dec 18, 2003 at 09:45:55AM +0100, Ewout Boks wrote:
> I do not understand this, as the ATMega32 has 32K of flash and address
> 0x37ff is exactly at 16K, ie halfway the application flash of the ATMega32.
Is this a case of the avr using word adressing, and gnu tools remaining
with the standard byte addressing? Here is what I did for the mega64,
yesterday, for the same purpose:
text (rx) : ORIGIN = 0, LENGTH = 62K
boot (rx) : ORIGIN = 62K, LENGTH = 2K
data (rw!x) : ORIGIN = 0x800100, LENGTH = 4K
eeprom (rw!x) : ORIGIN = 0x810000, LENGTH = 2K
} > boot
The length of the boot (flash) sector is 1K words, so we set 2K bytes.
Sorry if this is short, but my Christmas holiday started some hours ago,
and I'm still chained to the desk.