[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[avr-gcc-list] RE: avr-gcc-list Digest, Vol 22, Issue 14

From: wbounce
Subject: [avr-gcc-list] RE: avr-gcc-list Digest, Vol 22, Issue 14
Date: Mon, 15 Nov 2004 19:29:06 -0500

I use AVRDude with just a parallel port cable  that connects to a ISP
header. I took a old midi cable found in an old computer. I cut the
other end of the printer table I put 4 300 ohm resistors in series
between the printer cable and the midi cable and wired ground straight
through. It cost me 0. 

I could send you more infor if you want.

--original message----------------------------
Subject: Re: [avr-gcc-list] AVRDUDE & AVRIce

> I was wondering if you can use avrdude with the avrice, to program 
> atmel chips?  If not, is there a windows command line tool for 
> programming with the avrice tool?

  I use avrdude and the AVR-isp tool to program Atmel AVR devices from

  What platform do you want to use to do the programming?

  I believe I've used avrdude from a Cygwin environment on Windows, but
  I try and blank out any past windows experiences I have had.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]