[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [avr-gcc-list] programming the at90can128

From: Theodore A. Roth
Subject: Re: [avr-gcc-list] programming the at90can128
Date: Tue, 16 Nov 2004 11:11:48 -0800 (PST)

On Tue, 16 Nov 2004, Graham Davies wrote:

> Well, maybe it's not so off-topic after all, then.  I can certainly post the
> JTAG ID, which I recall AVaRICE prints right out.  The "config params" would
> mean snooping the serial communication between AVR Studio and the JTAG
> interface, right?  I don't have a good way of doing that.
> I'm sending an AVR ICE-Cube to Brian Dean for him to look at, but I don't
> suppose that matters as he has an Atmel JTAG ICE already, I think.
> Maybe the XML Part Description Files included with AVR Studio contain the
> necessary information.  For example, the ID of the AT90CAN128 is given as
> 0x0978103F (for the ATmega128, it's 0x0970203F).  After this, there are
> strings of bytes in tags such as ucRead, ucWrite, etc.  Perhaps this is what
> AVaRICE needs?

What we need to do is add a new jtag_device_def_type entry for the
can128 in jtagio.cc. The only non-obvious part is the
jtag_device_desc_type field which is defined in jtag.h (I tried to
extensively comment this structure to make adding new devices less
painful and less reliant on getting the info from Atmel).

We may be able to intuit the information we need without snooping the
serial line.

> Graham.
> ----- Original Message -----
> From: "Theodore A. Roth" <address@hidden>
> To: "Graham Davies" <address@hidden>
> Cc: <address@hidden>
> Sent: Tuesday, November 16, 2004 10:15 AM
> Subject: Re: [avr-gcc-list] programming the at90can128
> > On Tue, 16 Nov 2004, Graham Davies wrote:
> <snip>
> > > The AVR ICE-Cube works fine (as far as I can tell) with AVaRICE, but the
> > > version I have does not support the AT90CAN128 and does not like the
> > > it returns.  Presumably, it's only a matter of time until support is
> added.
> > If you could post the JTAG ID and possibly a capture of the config
> > params that get sent down to the jtagice box by avarice/avrstudio, then
> > we could added support for the can128 to avarice rather quickly. I don't
> > have a can128 part so I can't really look into that.
> >
> > [I seem to recall Brian Dean saying that he was working with the can128.
> > Maybe he can lend a hand with the data we need to add support in
> > avarice. Wink, wink. Nudge, nudge.]
> >
> > ---
> > Ted Roth
> > PGP Key ID: 0x18F846E9
> > Jabber ID: address@hidden
> _______________________________________________
> avr-gcc-list mailing list
> address@hidden
> http://www.avr1.org/mailman/listinfo/avr-gcc-list

Ted Roth
PGP Key ID: 0x18F846E9
Jabber ID: address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]