[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[avr-gcc-list] Unable to debug code relocated with "-Ttext=" (e.g. bootl

From: Pieter Conradie
Subject: [avr-gcc-list] Unable to debug code relocated with "-Ttext=" (e.g. bootloader)
Date: Wed, 30 Mar 2005 10:01:41 +0200

AVR Studio and GDB/Insight is unable to debug code when it is relocated with
the linker option "-Ttext=0x1E000" for an ATmega128, e.g. when creating a
bootloader application.

This was experienced with WinAVR-20050214 and AVR Studio 4.11, by loading
dwarf-2 and stabs debug format (ELF and COFF).

I can verify that the code is correctly generated by inspecting the
dissassembly, but the C debugging info is mangled, e.g. the "main" starting
point is incorrectly displayed as "address@hidden: main", in stead of the
proper location of "0000F0B9".

Any workaround or linker switch that I should be aware of?


reply via email to

[Prev in Thread] Current Thread [Next in Thread]