Re: [avr-gcc-list] Reading block from EEPROM ?

[Vincent Trouilliez]

On Mon, 2005-10-10 at 08:50 -0500, Andy Warner wrote:
> Bernard Fouché wrote:
> > [...]
> > Check that avrdude is told not to erase the eeprom before reflashing 
> > (the default value for flash/eeprom for unset memory is 0xFF). I guess 
> > your problem is coming from that and not single byte/block read. I don't 
> > remember the correct avrdude option at the moment however.
> 
> This may not be an avrdude problem, per se - but double
> check the value of bit 3 of the high fuse byte. This
> controls whether eeprom contents are preserved/cleared
> during a chip erase. Default value says erase the eeprom.
> See page 255 of the Mega32 manual.


Thanks chaps, I modified the high fuse byte appropriately, and all seems
well now, my EEPROM data is not lost every time I program the chip
anymore, yahoo... :-)



--
Vince