[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [avr-gcc-list] Cont. Programming in eeprom in avrdude

From: Sumeet Pal Singh
Subject: Re: [avr-gcc-list] Cont. Programming in eeprom in avrdude
Date: Fri, 28 Oct 2005 01:20:34 +0530

i wish to keep constants in the eeprom. Actually the data is for maze solver robot. We wish to keep some prodefined data in eeprom. the eeprom storage and reading during run time can be easily done, but before hand some programming in quick time becomes difficult. Changing certain values 10 minutes before match becomes problem.

Eric could you elaborate on formation of .eep(if possible with an example). I believe this is what i want.

On 10/27/05, Parthasaradhi Nayani <address@hidden> wrote:
Hello Summet,
what data do you want to programme in the EEPROM?
strings or some constants. The easiest will be to use
a simple assembler (popular ones being that of 8051
controller). Create a source code with your data, if
strings db "xyz" etc. assemble and link. This process
will not take more than 10 seconds and if you have a
batch file things will be easier. The output hex file
is ready to go into your eeprom!!! HTH.


--- Sumeet Pal Singh <address@hidden> wrote:

> Hi
> I just wish to continue the question.
> Sure the eeprom can be programmed using -U
> eeprom:w:<yourfilename> option.
> but the file needs to be intel hex file or motorola
> M file.
> To generate intel hex file the 1-byte checksum needs
> to be generated after
> each line. This is the cause of all trouble. If I do
> generate a hex file
> then even a minor change to it requires a lot of
> calculator work. Does
> someone have a program which takesin hex values and
> can generate hex files
> in easier(direct) way.
> Thanks
> To learn how to generate intel hex download download
> intel hex file
> specification from atmel.com <http://atmel.com >
> > _______________________________________________
> AVR-GCC-list mailing list
> address@hidden

Yahoo! FareChase: Search multiple travel sites in one click.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]