[avr-gcc-list] problem with bfd target ?

[brengi]

Hello. I am starting using Debian etch to program avr chips.
Tools works well with a simple ledtest example from the web.
I have compiled a small C program and downloaded with uisp.

After that I downloaded avrlib and try to make examples
to work. This is my problem:

----log---
$export AVRLIB=/usr/src/avrlib
$make
[...start to compile...]
avr-gcc  /usr/src/avrlib/buffer.o /usr/src/avrlib/uart.o  
/usr/src/avrlib/rprintf
.o /usr/src/avrlib/timer.o /usr/src/avrlib/a2d.o  
/usr/src/avrlib/vt100.o /usr/sr
c/avrlib/cmdline.o cmdlinetest.o   -Wl,-Map=cmdlinetest.map,--cref  
-mmcu=atmega1
63 -o cmdlinetest.elf
avr-objcopy --debugging -O coff-ext-avr \
                --change-section-address   .data-0x800000 \
                --change-section-address    .bss-0x800000 \
                --change-section-address .noinit-0x800000 \
                --change-section-address .eeprom-0x810000 \
                cmdlinetest.elf cmdlinetest.cof
avr-objcopy: cmdlinetest.cof: Invalid bfd target
avr-objcopy: --change-section-vma .eeprom+0xff7f0000 never used
avr-objcopy: --change-section-lma .eeprom+0xff7f0000 never used
avr-objcopy: --change-section-vma .noinit+0xff800000 never used
avr-objcopy: --change-section-lma .noinit+0xff800000 never used
avr-objcopy: --change-section-vma .bss+0xff800000 never used
avr-objcopy: --change-section-lma .bss+0xff800000 never used
avr-objcopy: --change-section-vma .data+0xff800000 never used
avr-objcopy: --change-section-lma .data+0xff800000 never used
make: *** [cmdlinetest.cof] Error 1
rm /usr/src/avrlib/cmdline.o /usr/src/avrlib/buffer.o  
/usr/src/avrlib/timer.o /u
sr/src/avrlib/rprintf.o /usr/src/avrlib/uart.o /usr/src/avrlib/vt100.o  
/usr/src/
avrlib/a2d.o

---end log----
The .elf .map .o and .lst files are there and not empty, but I don't  
understand
the error. And don't know what is the .cof file for. Do I need it?

$ls
cmdlineconf.h
cmdlinetest.c
cmdlinetest.elf
cmdlinetest.lst
cmdlinetest.map
cmdlinetest.o
global.h
makefile

Tools versions are:
$avr-gcc -v
 Usando especificaciones internas.
 Target: avr
 Configurado con: ../build-tree/gcc-4.1.0/configure -v  
--enable-languages=c,c++
--prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man  
--enable-shared
--with-system-zlib --enable-long-long --enable-nls  
--without-included-gettext --
disable-checking --disable-libssp --build=i486-linux-gnu  
--host=i486-linux-gnu -
-target=avr
 Modelo de hilos: single
 gcc versi<F3>n 4.1.0

$avr-objcopy -V
 GNU objcopy 2.16.1

I would appreciate some help.
Thanks for your time.