[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[avr-gcc-list] I cannot change target/port in avr-insight

From: Chunhua Li
Subject: [avr-gcc-list] I cannot change target/port in avr-insight
Date: Wed, 25 Jul 2007 08:25:29 +0100
User-agent: Mutt/1.5.16 (2007-06-09)

Dear list,
I have successfully built the avr-gcc tool chains in a Linux box. 
Now I want to learn some basic skills for simulating and debugging. 
I make a very simple project and make it. Everthing goes 
smoothly without errors. I want to use simulavr/avr-insight to run 
basic simulation, so I convert .elf to .bin with the following command:
   $ avr-objcopy -j .text -j .data -O binary main.elf main.bin
and then start simulavr as
   $ simulavr -d at90s8515 -P simulavr-disp -g main.bin
simulavr displays lots of *MESSAGE* followed by the following information
   main.c:415: MESSAGE: Simulating clock frequency of 8000000 Hz
   Waiting on port 1212 for gdb client to connect...
   Connection opened by host, port -15050.
   Waiting on port 1212 for gdb client to connect...

I open another console and run "avr-insight main.elf". From "Run" menu 
I select "Connect to target". In the popup menu I choose 
   Target: GDBserver/TCP
   Hostname: localhost
   Port: 1000 <=== This should be 1212

but I cannot change the port from 1000 to 1212. I can setup target and 
port on "avr-gdb".

What wrong with avr-insight? Do I need set some options on the makefile 
to enable simulavr/avr-insight?

Another newbie question is: can I use AvaRice/avr-insight to run simulation, 
not emulation, because I don't have JTAG connections.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]