[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] configuration file
From: |
E. Weddington |
Subject: |
Re: [avrdude-dev] configuration file |
Date: |
Sat, 29 Mar 2003 14:51:06 -0700 |
On 29 Mar 2003 at 22:42, BlackAngel wrote:
> Hi,
>
> is it possible to set in the config file a default target (like
> makefile)?
> Then the user could set his project special settings and
> so it would be possible to start this job out of an external program
> like ultraedit under windows with a one button click. It could be
> solved with a batch file under windows but this is no soloution for
> unix or freebsd.
>
See the avrdude user manual. There is a system configuration file and
a user configuration file which can override the system configuration
file. The user configuration file would be the place to put your
default values. You can set default values for: parallel port, serial
port, and programmer.
If you want to set a default AVR part, one way to do this would be in
the makefile for building the software. The value that you use for
the GCC -mmcu flag can also be used for the avrdude -p option, e.g.
atmega128.
Eric