|
From: | Emacs bug Tracking System |
Subject: | bug#4776: marked as done (Error setting default face and unspecified-bg in default face when starting emacs 23.1 with --daemon) |
Date: | Wed, 04 Nov 2009 01:55:08 +0000 |
Your message dated Tue, 3 Nov 2009 17:46:37 -0800 (PST) with message-id <200911040146.nA41kbnT027147@godzilla.ics.uci.edu> and subject line Re: bug#4776: Error setting default face and unspecified-bg in default face when starting emacs 23.1 with --daemon has caused the Emacs bug report #4776, regarding Error setting default face and unspecified-bg in default face when starting emacs 23.1 with --daemon to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@emacsbugs.donarmstrong.com immediately.) -- 4776: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=4776 Emacs Bug Tracking System Contact owner@emacsbugs.donarmstrong.com with problems
--- Begin Message ---Subject: Error setting default face and unspecified-bg in default face when starting emacs 23.1 with --daemon Hi, Date: Wed, 21 Oct 2009 10:05:57 -0700 I downloaded emacs 23.1 and built it with './configure ; make' without incident on my linux box 2.6.20.
In my .emacs I have the following specifying the default face:(custom-set-faces
;; custom-set-faces was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
'(default ((t (:stipple nil :background "black" :foreground "white" :inverse-video nil :box nil :strike-through nil :overline nil :underline nil :slant normal :weight normal :height 140 :width normal))))
When I start emacs without --daemon, it starts without errors, works fine, and the default face has reasonable values:-----------Family: Luxi Mono
Foundry: b&h
Width: normal
Height: 141
Weight: normal
Slant: normal
Foreground: white
Background: black
Underline: nil
Overline: nil
Strike-through: nil
Box: nil
Inverse: nil
Stipple: nil
Font: #<font-object -b&h-Luxi Mono-normal-normal-normal-*-19-*-*-*-m-0-iso10646-1>
Fontset: -b&h-Luxi Mono-normal-normal-normal-*-19-*-*-*-m-0-fontset-auto1
Inherit: unspecified------------------However, when I start emacs by first doing 'emacs --daemon', and then 'emacsclient -c', I get errors:
Unable to load color "unspecified-bg"And the colors are not set correctly. Poking around, I found that the default face in this instance has:
---------------------------Family: Luxi Mono--------------------------
Foundry: b&h
Width: normal
Height: 119
Weight: normal
Slant: normal
Foreground: black
Background: unspecified-bg
Underline: nil
Overline: nil
Strike-through: nil
Box: nil
Inverse: nil
Stipple: nil
Font: #<font-object -b&h-Luxi Mono-normal-normal-normal-*-16-*-*-*-m-0-iso10646-1>
Fontset: -b&h-Luxi Mono-normal-normal-normal-*-16-*-*-*-m-0-fontset-startup
Inherit: unspecified
Further, when I use C-x,C-e to manually evaluate the custom-set-faces line in my .emacs I get the following stack trace:
Debugger entered--Lisp error: (error "Undefined color" "unspecified-fg")
internal-set-lisp-face-attribute(default :foreground "unspecified-fg" #<frame emacs@devrs005.snc1.facebook.com 0x135f180>)
set-face-attribute(default #<frame emacs@devrs005.snc1.facebook.com 0x135f180> :stipple nil :background "unspecified-bg" :foreground "unspecified-fg" :inverse-video nil :box nil :strike-through nil :overline nil :underline nil :slant normal :weight normal :height 1 :width normal :foundry "default" :family "default")
apply(set-face-attribute default #<frame emacs@devrs005.snc1.facebook.com 0x135f180> (:stipple nil :background "unspecified-bg" :foreground "unspecified-fg" :inverse-video nil :box nil :strike-through nil :overline nil :underline nil :slant normal :weight normal :height 1 :width normal :foundry "default" :family "default"))
face-spec-set-2(default #<frame emacs@devrs005.snc1.facebook.com 0x135f180> ((t :stipple nil :background "unspecified-bg" :foreground "unspecified-fg" :inverse-video nil :box nil :strike-through nil :overline nil :underline nil :slant normal :weight normal :height 1 :width normal :foundry "default" :family "default")))
face-spec-recalc(default #<frame emacs@devrs005.snc1.facebook.com 0x135f180>)
face-spec-set(default ((t (:stipple nil :background "black" :foreground "white" :inverse-video nil :box nil :strike-through nil :overline nil :underline nil :slant normal :weight normal :height 140 :width normal))) t)
custom-theme-set-faces(user (default ((t ...))))
apply(custom-theme-set-faces user (default ((t ...))))
custom-set-faces((default ((t ...))))
eval((custom-set-faces (quote (default ...))))
eval-last-sexp-1(nil)
eval-last-sexp(nil)
call-interactively(eval-last-sexp nil nil)
One more detail: I'm (ssh -X)'ing into the linux box from a Snow Leopard Mac running X11 (XQuartz 2.3.4 (xorg-server 1.4.2-apple45))
Anyone else seeing this behavior or know what to do about it?
Thanks,
Josh
--- End Message ---
--- Begin Message ---Subject: Re: bug#4776: Error setting default face and unspecified-bg in default face when starting emacs 23.1 with --daemon Date: Tue, 3 Nov 2009 17:46:37 -0800 (PST) Joshua Redstone <redstone@gmail.com> writes: > I just checked out the current repository, compiled, and this problem doesn't > exist for me anymore. > Looks like it was fixed. Thanks, closing them bug then. > Thanks, > Josh > > On Wed, Oct 21, 2009 at 11:28 PM, Dan Nicolaescu <dann@ics.uci.edu> wrote: > > Joshua Redstone <redstone@gmail.com> writes: > > > Hi, > > I downloaded emacs 23.1 and built it with './configure ; make' without > incident > > on my linux box 2.6.20. > > In my .emacs I have the following specifying the default face: > > (custom-set-faces > > ;; custom-set-faces was added by Custom. > > ;; If you edit it by hand, you could mess it up, so be careful. > > ;; Your init file should contain only one such instance. > > ;; If there is more than one, they won't work right. > > '(default ((t (:stipple nil :background "black" :foreground "white" > > :inverse-video nil :box nil :strike-through nil :overline nil :underline > nil > > :slant normal :weight normal :height 140 :width normal)))) > > When I start emacs without --daemon, it starts without errors, works > fine, and > > the default face has reasonable values: > > ----------- > > This sounds a lot like bug#1078 > could you try with emacs from CVS and see if you get the problem there too?
--- End Message ---
[Prev in Thread] | Current Thread | [Next in Thread] |