bug-gnu-emacs
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

bug#8302: 23.3; Parallel make: some *.el files are byte-compiled twice


From: Glenn Morris
Subject: bug#8302: 23.3; Parallel make: some *.el files are byte-compiled twice
Date: Wed, 18 May 2011 21:35:28 -0400
User-agent: Gnus (www.gnus.org), GNU Emacs (www.gnu.org/software/emacs/)

Ulrich Mueller wrote:

> With parallel make (-j3), some elisp files, for example lisp/select.el
> and lisp/scroll-bar.el, are byte-compiled twice.
[...]
> The reason seems to be that select.elc occurs twice in
> src/Makefile.in: in variable "lisp" as $(lispsource)select.elc and in
> variable "SOME_MACHINE_LISP" as ../lisp/select.elc, so that make
> doesn't recognise them as identical targets.
>
> Attached patch makes the problem go away for me. My humble solution is
> to change SOME_MACHINE_LISP to use $(lispsource), and introduce a new
> variable SOME_MACHINE_SHORTLISP for the ../lisp/ entries.

I haven't applied this because I was reluctant to add yet another
list'o'filenames to src/Makefile.in, for a relatively minor issue.

On reflection, I think the current src/Makefile is needlessly complex.
It draws a distinction between lisp files that are preloaded on all
platforms, and those that are preloaded only on some platforms.
However, AFAICS, there is no need to do this. All the possible preloaded
lisp files are prerequisites of the DOC file (so that the DOC file can
be platform independent), and the emacs executable depends on the DOC
file, therefore it depends on all the possible preloaded lisp files, not
just the ones used by the platform in question.

So I think we can get rid of the "some_machine" lisp distinction.
Does anyone see a problem with that?

It nicely simplifies src/Makefile, and makes some configure output
variables no longer necessary.

The essential part of the patch is below. I have not included the
associated simplifications to configure.in, and the msdos and W32
makefiles.


*** src/Makefile.in     2011-04-24 09:00:03 +0000
--- src/Makefile.in     2011-05-19 01:06:45 +0000
***************
*** 237,254 ****
  MSDOS_OBJ =
  ## w16select.o termcap.o if MSDOS && HAVE_X_WINDOWS.
  MSDOS_X_OBJ =
- MSDOS_SUPPORT_REAL = $(lispsource)/ls-lisp.elc $(lispsource)/disp-table.elc \
-  $(lispsource)/dos-fns.elc $(lispsource)/dos-w32.elc 
$(lispsource)/dos-vars.elc \
-  $(lispsource)/term/internal.elc $(lispsource)/term/pc-win.elc
- ## $MSDOS_SUPPORT_REAL if MSDOS.
- MSDOS_SUPPORT =
  
  address@hidden@
  address@hidden@
  address@hidden@
  address@hidden@
  address@hidden@
- address@hidden@
  ## Only set if NS_IMPL_GNUSTEP.
  address@hidden@
  
--- 237,248 ----
***************
*** 258,285 ****
  ## else xfont.o
  address@hidden@
  
- ## Used if HAVE_MOUSE.
- REAL_MOUSE_SUPPORT=$(lispsource)/mouse.elc $(lispsource)/select.elc \
-   $(lispsource)/scroll-bar.elc
- ## Used if HAVE_GPM && !HAVE_MOUSE
- GPM_MOUSE_SUPPORT=$(lispsource)/mouse.elc
  LIBGPM = @LIBGPM@
- ## Either of the two preceding options, or empty.
- address@hidden@
- 
- ## $(lispsource)/tooltip.elc if HAVE_WINDOW_SYSTEM, else empty.
- address@hidden@
- 
- BASE_WINDOW_SUPPORT=$(lispsource)/fringe.elc $(lispsource)/image.elc \
-   $(lispsource)/international/fontset.elc $(lispsource)/dnd.elc \
-   $(lispsource)/tool-bar.elc $(lispsource)/mwheel.elc
- 
- X_WINDOW_SUPPORT=$(lispsource)/x-dnd.elc $(lispsource)/term/common-win.elc \
-   $(lispsource)/term/x-win.elc $(lispsource)/dynamic-setting.elc
- 
- ## If HAVE_X_WINDOWS, both the above
- ## else if HAVE_WINDOW_SYSTEM (ie, HAVE_NS) just the former; else empty.
- address@hidden@
  
  ## -lresolv, or empty.
  LIBRESOLV = @LIBRESOLV@
--- 252,258 ----
***************
*** 385,439 ****
  otherobj= $(TERMCAP_OBJ) $(PRE_ALLOC_OBJ) $(GMALLOC_OBJ) $(RALLOC_OBJ) \
    $(POST_ALLOC_OBJ) $(VMLIMIT_OBJ) $(WIDGET_OBJ) $(LIBOBJS)
  
! ## This is the platform-specific list of Lisp files loaded into the
! ## dumped Emacs.  It is arranged like this because it is easier to generate
! ## it semi-mechanically from loadup.el this way.
  ##
  ## Note that this list should not include lisp files which might not
  ## be present, like site-load.el and site-init.el; this makefile
  ## expects them all to be either present or buildable.
  ##
- ## Files which are loaded unconditionally (i.e., on all platforms) should
- ## also be in shortlisp.  Files which are loaded conditionally (i.e., only
- ## on some platforms) should instead be in SOME_MACHINE_LISP.
- ##
  ## Place loaddefs.el first, so it gets generated first, since it is on
  ## the critical path (relevant in parallel compilations).
  lisp= \
        $(lispsource)/loaddefs.el \
!       $(lispsource)/abbrev.elc \
!       $(lispsource)/buff-menu.elc \
!       $(lispsource)/button.elc \
        $(lispsource)/emacs-lisp/byte-run.elc \
-       $(lispsource)/composite.elc \
-       $(lispsource)/cus-face.elc \
-       $(lispsource)/cus-start.elc \
-       $(lispsource)/custom.elc \
        $(lispsource)/emacs-lisp/backquote.elc \
!       $(lispsource)/emacs-lisp/lisp-mode.elc \
!       $(lispsource)/emacs-lisp/lisp.elc \
!       $(lispsource)/env.elc \
!       $(lispsource)/faces.elc \
!       $(lispsource)/files.elc \
!       $(lispsource)/format.elc \
!       $(lispsource)/facemenu.elc \
!       $(MOUSE_SUPPORT) \
!       $(lispsource)/emacs-lisp/float-sup.elc \
!       $(lispsource)/frame.elc \
!       $(lispsource)/help.elc \
!       $(lispsource)/indent.elc \
!       $(lispsource)/isearch.elc \
!       $(lispsource)/rfn-eshadow.elc \
!       $(lispsource)/loadup.el \
!       $(lispsource)/bindings.elc \
        $(lispsource)/emacs-lisp/map-ynp.elc \
!       $(lispsource)/menu-bar.elc \
        $(lispsource)/international/mule.elc \
        $(lispsource)/international/mule-conf.elc \
        $(lispsource)/international/mule-cmds.elc \
        $(lispsource)/international/characters.elc \
        $(lispsource)/international/charprop.el \
-       $(lispsource)/case-table.elc \
        $(lispsource)/language/chinese.elc \
        $(lispsource)/language/cyrillic.elc \
        $(lispsource)/language/indian.elc \
--- 358,415 ----
  otherobj= $(TERMCAP_OBJ) $(PRE_ALLOC_OBJ) $(GMALLOC_OBJ) $(RALLOC_OBJ) \
    $(POST_ALLOC_OBJ) $(VMLIMIT_OBJ) $(WIDGET_OBJ) $(LIBOBJS)
  
! ## This is the list of all Lisp files that might be loaded into the
! ## dumped Emacs.  Some of them are not loaded on all platforms, but
! ## the DOC file on every platform uses them (because the DOC file is
! ## supposed to be platform-independent).
! ## It is arranged like this because it is easier to generate it
! ## semi-mechanically from loadup.el this way.
! ## Eg something like:
! ##   sed -e 's/"[ )].*//' -n -e '/(load "/ s/.*load "//p' loadup.el | \
! ##   grep -vE 'site-|ldefs-boot'
! ## minus any duplicates.
! ##
! ## Confusingly, term/internal is not in loadup, but is unconditionally
! ## loaded by pc-win, which is.
  ##
  ## Note that this list should not include lisp files which might not
  ## be present, like site-load.el and site-init.el; this makefile
  ## expects them all to be either present or buildable.
  ##
  ## Place loaddefs.el first, so it gets generated first, since it is on
  ## the critical path (relevant in parallel compilations).
  lisp= \
        $(lispsource)/loaddefs.el \
!       $(lispsource)/loadup.el \
        $(lispsource)/emacs-lisp/byte-run.elc \
        $(lispsource)/emacs-lisp/backquote.elc \
!       $(lispsource)/subr.elc \
!       $(lispsource)/version.el \
!       $(lispsource)/widget.elc \
!       $(lispsource)/custom.elc \
        $(lispsource)/emacs-lisp/map-ynp.elc \
!       $(lispsource)/cus-start.elc \
        $(lispsource)/international/mule.elc \
        $(lispsource)/international/mule-conf.elc \
+       $(lispsource)/env.elc \
+       $(lispsource)/format.elc \
+       $(lispsource)/bindings.elc \
+       $(lispsource)/files.elc \
+       $(lispsource)/cus-face.elc \
+       $(lispsource)/faces.elc \
+       $(lispsource)/button.elc \
+       $(lispsource)/startup.elc \
+       $(lispsource)/minibuffer.elc \
+       $(lispsource)/abbrev.elc \
+       $(lispsource)/simple.elc \
+       $(lispsource)/help.elc \
+       $(lispsource)/jka-cmpr-hook.elc \
+       $(lispsource)/epa-hook.elc \
        $(lispsource)/international/mule-cmds.elc \
+       $(lispsource)/case-table.elc \
        $(lispsource)/international/characters.elc \
+       $(lispsource)/composite.elc \
        $(lispsource)/international/charprop.el \
        $(lispsource)/language/chinese.elc \
        $(lispsource)/language/cyrillic.elc \
        $(lispsource)/language/indian.elc \
***************
*** 449,455 ****
        $(lispsource)/language/japanese.el \
        $(lispsource)/language/korean.el \
        $(lispsource)/language/lao.el \
-       $(lispsource)/language/cham.el \
        $(lispsource)/language/tai-viet.el \
        $(lispsource)/language/thai.el \
        $(lispsource)/language/tibetan.elc \
--- 425,430 ----
***************
*** 459,530 ****
        $(lispsource)/language/georgian.el \
        $(lispsource)/language/khmer.el \
        $(lispsource)/language/burmese.el \
!       $(lispsource)/paths.el \
!       $(lispsource)/register.elc \
!       $(lispsource)/replace.elc \
!       $(lispsource)/simple.elc \
!       $(lispsource)/minibuffer.elc \
!       $(lispsource)/startup.elc \
!       $(lispsource)/subr.elc \
        $(lispsource)/term/tty-colors.elc \
        $(lispsource)/font-core.elc \
        $(lispsource)/emacs-lisp/syntax.elc \
        $(lispsource)/font-lock.elc \
        $(lispsource)/jit-lock.elc \
!       $(lispsource)/textmodes/fill.elc \
        $(lispsource)/textmodes/page.elc \
        $(lispsource)/textmodes/paragraphs.elc \
        $(lispsource)/textmodes/text-mode.elc \
!       $(lispsource)/emacs-lisp/timer.elc \
!       $(lispsource)/jka-cmpr-hook.elc \
        $(lispsource)/vc/vc-hooks.elc \
        $(lispsource)/vc/ediff-hook.elc \
!       $(lispsource)/epa-hook.elc \
!       $(TOOLTIP_SUPPORT) \
!       $(MSDOS_SUPPORT) \
!       $(WINDOW_SUPPORT) \
!       $(NS_SUPPORT) \
!       $(lispsource)/widget.elc \
!       $(lispsource)/window.elc \
!       $(lispsource)/version.el
  
! ## List of relative names for those files from $lisp that are loaded
! ## unconditionally (i.e. on all platforms).  Files from $lisp that
! ## are only loaded on some platforms should instead be placed in
! ## SOME_MACHINE_LISP.  The only reason this variable exists is to prevent
! ## the make-docfile command-line getting too long for some systems.
  shortlisp= \
        ../lisp/loaddefs.el \
!       ../lisp/abbrev.elc \
!       ../lisp/buff-menu.elc \
!       ../lisp/button.elc \
        ../lisp/emacs-lisp/byte-run.elc \
-       ../lisp/composite.elc \
-       ../lisp/cus-face.elc \
-       ../lisp/cus-start.elc \
-       ../lisp/custom.elc \
        ../lisp/emacs-lisp/backquote.elc \
!       ../lisp/emacs-lisp/lisp-mode.elc \
!       ../lisp/emacs-lisp/lisp.elc \
!       ../lisp/facemenu.elc \
!       ../lisp/faces.elc \
!       ../lisp/files.elc \
!       ../lisp/emacs-lisp/float-sup.elc \
!       ../lisp/format.elc \
!       ../lisp/frame.elc \
!       ../lisp/help.elc \
!       ../lisp/indent.elc \
!       ../lisp/isearch.elc \
!       ../lisp/rfn-eshadow.elc \
!       ../lisp/loadup.el \
!       ../lisp/bindings.elc \
        ../lisp/emacs-lisp/map-ynp.elc \
!       ../lisp/env.elc \
        ../lisp/international/mule.elc \
        ../lisp/international/mule-conf.elc \
        ../lisp/international/mule-cmds.elc \
-       ../lisp/international/characters.elc \
        ../lisp/case-table.elc \
        ../lisp/language/chinese.elc \
        ../lisp/language/cyrillic.elc \
        ../lisp/language/indian.elc \
--- 434,528 ----
        $(lispsource)/language/georgian.el \
        $(lispsource)/language/khmer.el \
        $(lispsource)/language/burmese.el \
!       $(lispsource)/language/cham.el \
!       $(lispsource)/indent.elc \
!       $(lispsource)/window.elc \
!       $(lispsource)/frame.elc \
        $(lispsource)/term/tty-colors.elc \
        $(lispsource)/font-core.elc \
+       $(lispsource)/facemenu.elc \
        $(lispsource)/emacs-lisp/syntax.elc \
        $(lispsource)/font-lock.elc \
        $(lispsource)/jit-lock.elc \
!       $(lispsource)/mouse.elc \
!       $(lispsource)/scroll-bar.elc \
!       $(lispsource)/select.elc \
!       $(lispsource)/emacs-lisp/timer.elc \
!       $(lispsource)/isearch.elc \
!       $(lispsource)/rfn-eshadow.elc \
!       $(lispsource)/menu-bar.elc \
!       $(lispsource)/paths.el \
!       $(lispsource)/emacs-lisp/lisp.elc \
        $(lispsource)/textmodes/page.elc \
+       $(lispsource)/register.elc \
        $(lispsource)/textmodes/paragraphs.elc \
+       $(lispsource)/emacs-lisp/lisp-mode.elc \
        $(lispsource)/textmodes/text-mode.elc \
!       $(lispsource)/textmodes/fill.elc \
!       $(lispsource)/replace.elc \
!       $(lispsource)/buff-menu.elc \
!       $(lispsource)/fringe.elc \
!       $(lispsource)/image.elc \
!       $(lispsource)/international/fontset.elc \
!       $(lispsource)/dnd.elc \
!       $(lispsource)/tool-bar.elc \
!       $(lispsource)/dynamic-setting.elc \
!       $(lispsource)/x-dnd.elc \
!       $(lispsource)/term/common-win.elc \
!       $(lispsource)/term/x-win.elc \
!       $(lispsource)/w32-vars.elc \
!       $(lispsource)/term/w32-win.elc \
!       $(lispsource)/ls-lisp.elc \
!       $(lispsource)/disp-table.elc \
!       $(lispsource)/dos-w32.elc \
!       $(lispsource)/w32-fns.elc \
!       $(lispsource)/dos-fns.elc \
!       $(lispsource)/dos-vars.elc \
!       $(lispsource)/term/pc-win.elc \
!       $(lispsource)/term/internal.elc \
!       $(lispsource)/term/ns-win.elc \
!       $(lispsource)/mwheel.elc \
!       $(lispsource)/emacs-lisp/float-sup.elc \
        $(lispsource)/vc/vc-hooks.elc \
        $(lispsource)/vc/ediff-hook.elc \
!       $(lispsource)/tooltip.elc
  
! ## The same as $lisp, but using relative file names.  The only reason
! ## this variable exists is to prevent the make-docfile command-line
! ## getting too long for some systems.  Unfortunately, no-one has any
! ## idea how long "too long" is.
  shortlisp= \
        ../lisp/loaddefs.el \
!       ../lisp/loadup.el \
        ../lisp/emacs-lisp/byte-run.elc \
        ../lisp/emacs-lisp/backquote.elc \
!       ../lisp/subr.elc \
!       ../lisp/version.el \
!       ../lisp/widget.elc \
!       ../lisp/custom.elc \
        ../lisp/emacs-lisp/map-ynp.elc \
!       ../lisp/cus-start.elc \
        ../lisp/international/mule.elc \
        ../lisp/international/mule-conf.elc \
+       ../lisp/env.elc \
+       ../lisp/format.elc \
+       ../lisp/bindings.elc \
+       ../lisp/files.elc \
+       ../lisp/cus-face.elc \
+       ../lisp/faces.elc \
+       ../lisp/button.elc \
+       ../lisp/startup.elc \
+       ../lisp/minibuffer.elc \
+       ../lisp/abbrev.elc \
+       ../lisp/simple.elc \
+       ../lisp/help.elc \
+       ../lisp/jka-cmpr-hook.elc \
+       ../lisp/epa-hook.elc \
        ../lisp/international/mule-cmds.elc \
        ../lisp/case-table.elc \
+       ../lisp/international/characters.elc \
+       ../lisp/composite.elc \
+       ../lisp/international/charprop.el \
        ../lisp/language/chinese.elc \
        ../lisp/language/cyrillic.elc \
        ../lisp/language/indian.elc \
***************
*** 540,546 ****
        ../lisp/language/japanese.el \
        ../lisp/language/korean.el \
        ../lisp/language/lao.el \
-       ../lisp/language/cham.el \
        ../lisp/language/tai-viet.el \
        ../lisp/language/thai.el \
        ../lisp/language/tibetan.elc \
--- 538,543 ----
***************
*** 550,599 ****
        ../lisp/language/georgian.el \
        ../lisp/language/khmer.el \
        ../lisp/language/burmese.el \
!       ../lisp/menu-bar.elc \
!       ../lisp/paths.el \
!       ../lisp/register.elc \
!       ../lisp/replace.elc \
!       ../lisp/simple.elc \
!       ../lisp/minibuffer.elc \
!       ../lisp/startup.elc \
!       ../lisp/subr.elc \
        ../lisp/term/tty-colors.elc \
        ../lisp/font-core.elc \
        ../lisp/emacs-lisp/syntax.elc \
        ../lisp/font-lock.elc \
        ../lisp/jit-lock.elc \
!       ../lisp/textmodes/fill.elc \
        ../lisp/textmodes/page.elc \
        ../lisp/textmodes/paragraphs.elc \
        ../lisp/textmodes/text-mode.elc \
!       ../lisp/emacs-lisp/timer.elc \
!       ../lisp/vc/vc-hooks.elc \
!       ../lisp/vc/ediff-hook.elc \
!       ../lisp/jka-cmpr-hook.elc \
!       ../lisp/epa-hook.elc \
!       ../lisp/widget.elc \
!       ../lisp/window.elc \
!       ../lisp/version.el
! 
! ## Like $shortlisp, but includes only those files from $lisp that are loaded
! ## conditionally (i.e., only on some platforms).
! ## Confusingly, term/internal is not in loadup, but is unconditionally
! ## loaded by pc-win, which is.
! SOME_MACHINE_LISP = ../lisp/mouse.elc \
!   ../lisp/select.elc ../lisp/scroll-bar.elc \
!   ../lisp/ls-lisp.elc ../lisp/dos-fns.elc \
!   ../lisp/w32-fns.elc ../lisp/dos-w32.elc \
!   ../lisp/disp-table.elc ../lisp/dos-vars.elc ../lisp/w32-vars.elc \
!   ../lisp/tooltip.elc ../lisp/image.elc \
!   ../lisp/fringe.elc ../lisp/dnd.elc \
!   ../lisp/mwheel.elc ../lisp/tool-bar.elc \
!   ../lisp/x-dnd.elc ../lisp/dynamic-setting.elc \
    ../lisp/international/fontset.elc \
    ../lisp/term/common-win.elc \
    ../lisp/term/x-win.elc \
!   ../lisp/term/pc-win.elc ../lisp/term/internal.elc \
!   ../lisp/term/ns-win.elc ../lisp/term/w32-win.elc
  
  ## Construct full set of libraries to be linked.
  ## Note that SunOS needs -lm to come before -lc; otherwise, you get
--- 547,604 ----
        ../lisp/language/georgian.el \
        ../lisp/language/khmer.el \
        ../lisp/language/burmese.el \
!       ../lisp/language/cham.el \
!       ../lisp/indent.elc \
!       ../lisp/window.elc \
!       ../lisp/frame.elc \
        ../lisp/term/tty-colors.elc \
        ../lisp/font-core.elc \
+       ../lisp/facemenu.elc \
        ../lisp/emacs-lisp/syntax.elc \
        ../lisp/font-lock.elc \
        ../lisp/jit-lock.elc \
!       ../lisp/mouse.elc \
!       ../lisp/scroll-bar.elc \
!       ../lisp/select.elc \
!       ../lisp/emacs-lisp/timer.elc \
!       ../lisp/isearch.elc \
!       ../lisp/rfn-eshadow.elc \
!       ../lisp/menu-bar.elc \
!       ../lisp/paths.el \
!       ../lisp/emacs-lisp/lisp.elc \
        ../lisp/textmodes/page.elc \
+       ../lisp/register.elc \
        ../lisp/textmodes/paragraphs.elc \
+       ../lisp/emacs-lisp/lisp-mode.elc \
        ../lisp/textmodes/text-mode.elc \
!       ../lisp/textmodes/fill.elc \
!       ../lisp/replace.elc \
!       ../lisp/buff-menu.elc \
!       ../lisp/fringe.elc \
!       ../lisp/image.elc \
        ../lisp/international/fontset.elc \
+       ../lisp/dnd.elc \
+       ../lisp/tool-bar.elc \
+       ../lisp/dynamic-setting.elc \
+       ../lisp/x-dnd.elc \
        ../lisp/term/common-win.elc \
        ../lisp/term/x-win.elc \
!       ../lisp/w32-vars.elc \
!       ../lisp/term/w32-win.elc \
!       ../lisp/ls-lisp.elc \
!       ../lisp/disp-table.elc \
!       ../lisp/dos-w32.elc \
!       ../lisp/w32-fns.elc \
!       ../lisp/dos-fns.elc \
!       ../lisp/dos-vars.elc \
!       ../lisp/term/pc-win.elc \
!       ../lisp/term/internal.elc \
!       ../lisp/term/ns-win.elc \
!       ../lisp/mwheel.elc \
!       ../lisp/emacs-lisp/float-sup.elc \
!       ../lisp/vc/vc-hooks.elc \
!       ../lisp/vc/ediff-hook.elc \
!       ../lisp/tooltip.elc
  
  ## Construct full set of libraries to be linked.
  ## Note that SunOS needs -lm to come before -lc; otherwise, you get
***************
*** 630,645 ****
  ## $(SOME_MACHINE_OBJECTS).  Since a file is processed when it is mentioned
  ## for the first time, this prevents any variation between configurations
  ## in the contents of the DOC file.
- ## Likewise for $(SOME_MACHINE_LISP).
  ## Most of this Makefile refers to Lisp files via $(lispsource), so
  ## we also use $(lisp) rather than $(shortlisp) for the dependency since
  ## the Makefile uses string equality to decide when we talk about identical
  ## files.  Apparently we pass $(shortlisp) rather than $(lisp) to make-docfile
  ## only in order to reduce the command line length.  --Stef
! $(etc)/DOC: $(libsrc)/make-docfile$(EXEEXT) $(obj) $(lisp) 
$(SOME_MACHINE_LISP)
        -rm -f $(etc)/DOC
        $(libsrc)/make-docfile -d $(srcdir) $(SOME_MACHINE_OBJECTS) $(obj) > 
$(etc)/DOC
!       $(libsrc)/make-docfile -a $(etc)/DOC -d $(srcdir) $(SOME_MACHINE_LISP) 
$(shortlisp)
  
  $(libsrc)/make-docfile$(EXEEXT):
        cd $(libsrc); $(MAKE) $(MFLAGS) make-docfile$(EXEEXT)
--- 635,649 ----
  ## $(SOME_MACHINE_OBJECTS).  Since a file is processed when it is mentioned
  ## for the first time, this prevents any variation between configurations
  ## in the contents of the DOC file.
  ## Most of this Makefile refers to Lisp files via $(lispsource), so
  ## we also use $(lisp) rather than $(shortlisp) for the dependency since
  ## the Makefile uses string equality to decide when we talk about identical
  ## files.  Apparently we pass $(shortlisp) rather than $(lisp) to make-docfile
  ## only in order to reduce the command line length.  --Stef
! $(etc)/DOC: $(libsrc)/make-docfile$(EXEEXT) $(obj) $(lisp)
        -rm -f $(etc)/DOC
        $(libsrc)/make-docfile -d $(srcdir) $(SOME_MACHINE_OBJECTS) $(obj) > 
$(etc)/DOC
!       $(libsrc)/make-docfile -a $(etc)/DOC -d $(srcdir) $(shortlisp)
  
  $(libsrc)/make-docfile$(EXEEXT):
        cd $(libsrc); $(MAKE) $(MFLAGS) make-docfile$(EXEEXT)
***************
*** 797,803 ****
                             THEFILE=$< EMACS=$(bootstrap_exe)
  
  ## Since the .el.elc rule cannot specify an extra dependency, we do it here.
! $(lisp) $(SOME_MACHINE_LISP): $(BOOTSTRAPEMACS)
  
  ## VCSWITNESS points to the file that holds info about the current checkout.
  ## We use it as a heuristic to decide when to rebuild loaddefs.el.
--- 801,807 ----
                             THEFILE=$< EMACS=$(bootstrap_exe)
  
  ## Since the .el.elc rule cannot specify an extra dependency, we do it here.
! $(lisp): $(BOOTSTRAPEMACS)
  
  ## VCSWITNESS points to the file that holds info about the current checkout.
  ## We use it as a heuristic to decide when to rebuild loaddefs.el.

*** lisp/emacs-lisp/autoload.el 2011-05-04 15:38:41 +0000
--- lisp/emacs-lisp/autoload.el 2011-05-19 00:27:36 +0000
***************
*** 769,820 ****
  Definitions are written to `generated-autoload-file' (which
  should be non-nil)."
    ;; For use during the Emacs build process only.
    (unless autoload-excludes
!     (let* ((ldir (file-name-directory generated-autoload-file))
!          (default-directory
!            (file-name-as-directory
!             (expand-file-name (if (eq system-type 'windows-nt)
!                                   "../lib-src"
!                                 "../src") ldir)))
!          (mfile "Makefile")
!          (tmpfile "echolisp.tmp")
!          lim)
!       ;; Windows uses the 'echolisp' approach because:
!       ;; i) It does not have $lisp as a single simple definition, so
!       ;; it would be harder to parse the Makefile.
!       ;; ii) It can, since it already has $lisp broken up into pieces
!       ;; that the command-line can handle.
!       ;; Non-Windows builds do not use the 'echolisp' approach because
!       ;; no-one knows (?) the maximum safe command-line length on all
!       ;; supported systems.  $lisp is much longer there since it uses
!       ;; absolute paths, and it would seem a shame to split it just for this.
!       (when (file-readable-p mfile)
!       (if (eq system-type 'windows-nt)
!           (when (ignore-errors
!                  (if (file-exists-p tmpfile) (delete-file tmpfile))
!                  ;; FIXME call-process is better, if it works.
!                  (shell-command (format "%s echolisp > %s"
!                                         autoload-make-program tmpfile))
!                  (file-readable-p tmpfile))
              (with-temp-buffer
!               (insert-file-contents tmpfile)
!               ;; FIXME could be a single while loop.
!               (while (not (eobp))
!                 (setq lim (line-end-position))
!                 (while (re-search-forward "\\([^ ]+\\.el\\)c?\\>" lim t)
!                   (push (expand-file-name (match-string 1))
!                         autoload-excludes))
!                 (forward-line 1))))
!         (with-temp-buffer
!           (insert-file-contents mfile)
!           (when (re-search-forward "^shortlisp= " nil t)
!             (while (and (not lim)
!                         (re-search-forward "\\.\\./lisp/\\([^ ]+\\.el\\)c?\\>"
!                                            nil t))
!               (push (expand-file-name (match-string 1) ldir)
!                     autoload-excludes)
!               (skip-chars-forward " \t")
!               (if (eolp) (setq lim t)))))))))
    (let ((args command-line-args-left))
      (setq command-line-args-left nil)
      (apply 'update-directory-autoloads args)))
--- 769,791 ----
  Definitions are written to `generated-autoload-file' (which
  should be non-nil)."
    ;; For use during the Emacs build process only.
+   ;; Exclude those files that are preloaded on ALL platforms.
+   ;; These are the ones in loadup.el where "(load" is at the start
+   ;; of the line (crude, but it works).
    (unless autoload-excludes
!     (let ((default-directory (file-name-directory generated-autoload-file))
!         file)
!       (when (file-readable-p "loadup.el")
!       (dolist (f '("loadup.el" "loaddefs.el"))
!         (push (expand-file-name f) autoload-excludes))
        (with-temp-buffer
!         (insert-file-contents "loadup.el")
!         (while (re-search-forward "^(load \"\\([^\"]+\\)\"" nil t)
!           (setq file (match-string 1))
!           (or (string-match "\\.el\\'" file)
!               (setq file (format "%s.el" file)))
!           (or (string-match "\\`site-" file)
!               (push (expand-file-name file) autoload-excludes)))))))
    (let ((args command-line-args-left))
      (setq command-line-args-left nil)
      (apply 'update-directory-autoloads args)))







reply via email to

[Prev in Thread] Current Thread [Next in Thread]