[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: AVR BINUTILS
From: |
Tauno Voipio |
Subject: |
Re: AVR BINUTILS |
Date: |
Mon, 04 Feb 2002 15:15:30 GMT |
"Gareth Williams" <address@hidden> wrote in message
news:address@hidden
> Wonder if you can help?
>
> I have been using the avr patched bin utils 2.9.1 for a while now and
things
> seemed to be fine until our binary image started to creep higher than
about
> 60k bytes.
>
> We have been using avr-objcopy to create an srec file and then we feed
this
> into uisp to program our atmel avr mega 103 chip. But since crossing this
> boundary uisp programs nearly all the image but stops toward the end and
> reports 'Bad S Record Format'.
>
> I have updated the uisp AND binutils to the latest version (bin utils
2.9.5)
> but this problem still exists.
>
> I wonder if there are any known bugs with srecords in bin utils?
>
> I have attached a copy of our srec file and our .elf file from which we
> created the srec.
>
> Thanks for any help you can give.
>
> Gareth Williams.
>
> <<liquorice.elf>> <<liquorice.srec>>
The file is some over 65536 bytes (0x1018e). I suspect that uisp does not
understand addresses over the 65 kbyte limit.
Tauno Voipio
tauno voipio @ iki fi