Re: [Bug-gnubg] 3D-Problem

[Jonathan Kinsey]

Hi Klaus,

It looks like you have found the problem and worked around it (turn the
"threaded optimization" to "off"). I'm not sure if you are asking anything else?

Jon

Klaus Bernhard Troche wrote:
> Hi,
> On my laptop
> Samsung Q45 (Vista 32 bit) with a Nvidia GeForce 8400 G graphic card
> the 3D-board did not work.
> - I tried to update the driver, but samsung did not offer the newest
> drives.
> - I tried a fresh driver from laptopvideo2go.com, but there was no
> improvement. the 3D-board still did not show up. (once every while I saw
> a board, but no checker or dice movement, the performance test showed
> 100+ frames / sec )
> - Finally I started to play around with the 3D Settings in the NVIDIA
> Control Panel. With everything disabled, the 3D-board showed up and ran
> smoothly.
> - Then I changed every feature to find out which one caused the failure.
> - If "Threaded optimization" is "Off", everything works fine.
>
> To fine tune the 3D Settings I did the following:
> * Open NVIDIA Control Panel
> * Choose View->Advanced Settings
> * 3D Settings->Adjust image settings with preview: choose "Let the 3D
> application decide"
> * 3D Settings-> Manage 3D settings: on the Tab "Program Settings" hit
> "Add".
> * Browse to gnubg.exe. i.e. :"c:\Program Files\gnubg\gnubg.exe"
> * Select the Program to customize: gnubg.exe
> * In "Threaded optimization" change the value from "Use global
> setting(Auto)" to "Off"
> * Hit "Apply"
>
> * Try if your 3D-board works now and give feedback.
>
> * No negative feedback on my English, please. Here is a non-native-writer.
>
> Greetings
>
> Klaus Troche
> -------------
> -- Quidquid latine dictum sit, altum sonatur --
>
>
>
> _______________________________________________
> Bug-gnubg mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/bug-gnubg
>
>

---

View your other email accounts from your Hotmail inbox. Add them now.