[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
address@hidden: Bug#104508: grub: cannot get past stage1 on my SCSI disk
From: |
Jason Thomas |
Subject: |
address@hidden: Bug#104508: grub: cannot get past stage1 on my SCSI disk] |
Date: |
Sat, 14 Jul 2001 09:48:47 +1000 |
User-agent: |
Mutt/1.3.18i |
Anyone seen something like this before. Not sure how to handle this.
Thanks.
----- Forwarded message from Branden Robinson <address@hidden> -----
> From: Branden Robinson <address@hidden>
> Reply-To: Branden Robinson <address@hidden>,
> address@hidden
> To: Debian Bug Tracking System <address@hidden>
> Subject: Bug#104508: grub: cannot get past stage1 on my SCSI disk
> X-Debian-PR-Message: report 104508
> X-Debian-PR-Package: grub
> X-Debian-PR-Keywords: sid
> X-Reportbug-Version: 1.21
> X-Virus-Scanned: by AMaViS perl-10
>
> Package: grub
> Version: 0.90-1
> Severity: normal
> Tags: sid
>
> Prints "GRUB" and then halts.
>
> I can boot fine with GRUB on a floppy.
>
> SCSI subsystem driver Revision: 1.00
> PCI: Found IRQ 11 for device 00:08.0
> scsi: ***** BusLogic SCSI Driver Version 2.1.15 of 17 August 1998 *****
> scsi: Copyright 1995-1998 by Leonard N. Zubkoff <address@hidden>
> scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
> scsi0: Firmware Version: 5.07B, I/O Address: 0xC000, IRQ Channel: 11/Level
> scsi0: PCI Bus: 0, Device: 8, Address: 0xD7100000, Host Adapter SCSI ID: 7
> scsi0: Parity Checking: Enabled, Extended Translation: Enabled
> scsi0: Synchronous Negotiation: FUFNFFS#SFFFFFFF, Wide Negotiation: Enabled
> scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
> scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
> scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192
> scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
> scsi0: Error Recovery Strategy: Default, SCSI Bus Reset: Enabled
> scsi0: SCSI Bus Termination: High Enabled, SCAM: Disabled
> scsi0: *** BusLogic BT-958 Initialized Successfully ***
> scsi0 : BusLogic BT-958
> Vendor: IBM Model: DDYS-T09170N Rev: S80D
> Type: Direct-Access ANSI SCSI revision: 03
> Vendor: Model: CD-R/RW RW7060S Rev: 1.20
> Type: CD-ROM ANSI SCSI revision: 02
> Vendor: WangDAT Model: Model 3400DX Rev: 1.5a
> Type: Sequential-Access ANSI SCSI revision: 02
> scsi0: Target 1: Queue Depth 28, Wide Synchronous at 40.0 MB/sec, offset 15
> scsi0: Target 4: Queue Depth 3, Synchronous at 6.67 MB/sec, offset 15
> scsi0: Target 6: Queue Depth 3, Synchronous at 5.00 MB/sec, offset 15
> Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
> SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
> /dev/scsi/host0/bus0/target1/lun0: p1 p2 p3 p4
>
> Root is /dev/sda1, a.k.a. /dev/scsi/host0/bus0/target1/lun0/part1, a.k.a
> (hd3,0).
>
> ls -l /boot/grub/
> total 99
> -rw-rw-r-- 1 root disk 75 Jul 11 16:23 device.map
> -rw-rw-r-- 1 root disk 197 Jul 11 17:56 device.map.devfs
> -rw-r--r-- 1 root disk 7968 Jul 10 02:21 e2fs_stage1_5
> -rw-rw-r-- 1 root disk 1041 Jul 10 11:24 menu.lst
> -rw-r--r-- 1 root disk 512 Jul 10 02:21 stage1
> -rw-r--r-- 1 root disk 86880 Jul 10 02:21 stage2
>
> Please let me know if there is anything else you need to know about my system.
>
> -- System Information
> Debian Release: testing/unstable
> Architecture: i386
> Kernel: Linux apocalypse 2.4.6 #1 Thu Jul 12 22:30:06 EST 2001 i686
> Locale: LANG=C, LC_CTYPE=en_US.iso-8859-1
>
> Versions of packages grub depends on:
> ii libc6 2.2.3-6 GNU C Library: Shared libraries
> an
> ii libncurses5 5.2.20010318-2 Shared libraries for terminal
> hand
>
>
----- End forwarded message -----
--
Jason Thomas Phone: +61 2 6257 7111
System Administrator - UID 0 Fax: +61 2 6257 7311
tSA Consulting Group Pty. Ltd. Mobile: 0418 29 66 81
1 Hall Street Lyneham ACT 2602 http://www.topic.com.au/
pgp5Imoc7MYps.pgp
Description: PGP signature
- address@hidden: Bug#104508: grub: cannot get past stage1 on my SCSI disk],
Jason Thomas <=