Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31.5-127.fc12.x86_64 (address@hidden) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:11:14 EST 2009 Command line: BOOT_IMAGE=(hd0,gpt8)/vmlinuz0 root=/dev/sda7 rootfstype=ext4 ro nomodeset add_efi_memmap debug=all KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000086000 - 000000000009d000 (usable) BIOS-e820: 000000000009d000 - 000000000009f000 (ACPI NVS) BIOS-e820: 0000000000100000 - 00000000bd568000 (usable) BIOS-e820: 00000000bd568000 - 00000000bd668000 (unusable) BIOS-e820: 00000000bd668000 - 00000000bd76c000 (reserved) BIOS-e820: 00000000bd76c000 - 00000000bd86c000 (ACPI NVS) BIOS-e820: 00000000bd86c000 - 00000000bd8ec000 (ACPI data) BIOS-e820: 00000000bd8ec000 - 00000000bd951000 (usable) BIOS-e820: 00000000bd951000 - 00000000bd956000 (reserved) BIOS-e820: 00000000bd981000 - 00000000bd9a1000 (usable) BIOS-e820: 00000000bdaa1000 - 00000000bdf63000 (reserved) BIOS-e820: 00000000bdf63000 - 00000000bdf9f000 (ACPI NVS) BIOS-e820: 00000000bdf9f000 - 00000000bdfe4000 (reserved) BIOS-e820: 00000000bdfe4000 - 00000000bdfff000 (ACPI data) BIOS-e820: 00000000bdfff000 - 00000000be000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) EFI v2.10 by TianoCore.org ACPI 2.0=0xbd86b000 ACPI=0xbd86a000 SMBIOS=0xbd869000 MPS=0xbd868000 Kernel-defined memdesc doesn't match the one from EFI! EFI: mem00: type=7, attr=0xf, range=[0x0000000000086000-0x000000000008c000) (0MB) EFI: mem01: type=2, attr=0xf, range=[0x000000000008c000-0x0000000000090000) (0MB) EFI: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009d000) (0MB) EFI: mem03: type=10, attr=0xf, range=[0x000000000009d000-0x000000000009f000) (0MB) EFI: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000442000) (3MB) EFI: mem05: type=7, attr=0xf, range=[0x0000000000442000-0x000000007c17c000) (1981MB) EFI: mem06: type=2, attr=0xf, range=[0x000000007c17c000-0x00000000bace5000) (1003MB) EFI: mem07: type=1, attr=0xf, range=[0x00000000bace5000-0x00000000bad93000) (0MB) EFI: mem08: type=7, attr=0xf, range=[0x00000000bad93000-0x00000000bae41000) (0MB) EFI: mem09: type=4, attr=0xf, range=[0x00000000bae41000-0x00000000bae46000) (0MB) EFI: mem10: type=7, attr=0xf, range=[0x00000000bae46000-0x00000000bae4b000) (0MB) EFI: mem11: type=4, attr=0xf, range=[0x00000000bae4b000-0x00000000bae4f000) (0MB) EFI: mem12: type=7, attr=0xf, range=[0x00000000bae4f000-0x00000000bae51000) (0MB) EFI: mem13: type=4, attr=0xf, range=[0x00000000bae51000-0x00000000bae5a000) (0MB) EFI: mem14: type=7, attr=0xf, range=[0x00000000bae5a000-0x00000000bae5c000) (0MB) EFI: mem15: type=4, attr=0xf, range=[0x00000000bae5c000-0x00000000bae86000) (0MB) EFI: mem16: type=2, attr=0xf, range=[0x00000000bae86000-0x00000000bae87000) (0MB) EFI: mem17: type=4, attr=0xf, range=[0x00000000bae87000-0x00000000bd368000) (36MB) EFI: mem18: type=7, attr=0xf, range=[0x00000000bd368000-0x00000000bd477000) (1MB) EFI: mem19: type=3, attr=0xf, range=[0x00000000bd477000-0x00000000bd568000) (0MB) EFI: mem20: type=5, attr=0x800000000000000f, range=[0x00000000bd568000-0x00000000bd654000) (0MB) EFI: mem21: type=5, attr=0x800000000000000f, range=[0x00000000bd654000-0x00000000bd668000) (0MB) EFI: mem22: type=6, attr=0x800000000000000f, range=[0x00000000bd668000-0x00000000bd74a000) (0MB) EFI: mem23: type=6, attr=0x800000000000000f, range=[0x00000000bd74a000-0x00000000bd768000) (0MB) EFI: mem24: type=0, attr=0xf, range=[0x00000000bd768000-0x00000000bd76c000) (0MB) EFI: mem25: type=10, attr=0xf, range=[0x00000000bd76c000-0x00000000bd868000) (0MB) EFI: mem26: type=10, attr=0xf, range=[0x00000000bd868000-0x00000000bd86c000) (0MB) EFI: mem27: type=9, attr=0xf, range=[0x00000000bd86c000-0x00000000bd8ec000) (0MB) EFI: mem28: type=4, attr=0xf, range=[0x00000000bd8ec000-0x00000000bd951000) (0MB) EFI: mem29: type=4, attr=0x8, range=[0x00000000bd981000-0x00000000bd982000) (0MB) EFI: mem30: type=3, attr=0x8, range=[0x00000000bd982000-0x00000000bd997000) (0MB) EFI: mem31: type=4, attr=0x8, range=[0x00000000bd997000-0x00000000bd999000) (0MB) EFI: mem32: type=3, attr=0x8, range=[0x00000000bd999000-0x00000000bd9a1000) (0MB) EFI: mem33: type=0, attr=0x1, range=[0x00000000bdaa1000-0x00000000bdaa7000) (0MB) EFI: mem34: type=0, attr=0x8, range=[0x00000000bdaa7000-0x00000000bdbba000) (1MB) EFI: mem35: type=0, attr=0x1, range=[0x00000000bdbba000-0x00000000bdc0f000) (0MB) EFI: mem36: type=0, attr=0x8, range=[0x00000000bdc0f000-0x00000000bdd08000) (0MB) EFI: mem37: type=0, attr=0x1, range=[0x00000000bdd08000-0x00000000bdf0f000) (2MB) EFI: mem38: type=0, attr=0x8, range=[0x00000000bdf0f000-0x00000000bdf18000) (0MB) EFI: mem39: type=0, attr=0x1, range=[0x00000000bdf18000-0x00000000bdf1f000) (0MB) EFI: mem40: type=0, attr=0x8, range=[0x00000000bdf1f000-0x00000000bdf63000) (0MB) EFI: mem41: type=10, attr=0x1, range=[0x00000000bdf63000-0x00000000bdf9f000) (0MB) EFI: mem42: type=0, attr=0x8, range=[0x00000000bdf9f000-0x00000000bdfe4000) (0MB) EFI: mem43: type=9, attr=0x8, range=[0x00000000bdfe4000-0x00000000bdfff000) (0MB) EFI: mem44: type=0, attr=0x8, range=[0x00000000bdfff000-0x00000000be000000) (0MB) EFI: mem45: type=7, attr=0xf, range=[0x0000000100000000-0x000000013fa42000) (1018MB) EFI: mem46: type=2, attr=0xf, range=[0x000000013fa42000-0x0000000140000000) (5MB) EFI: mem47: type=11, attr=0x8000000000000000, range=[0x00000000bd951000-0x00000000bd956000) (0MB) DMI present. last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 100000000 mask FC0000000 write-back 3 base 0FFE00000 mask FFFE00000 write-protect 4 disabled 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 4GB, range: 1GB, type WB reg 3, base: 4094MB, range: 2MB, type WP total RAM coverred: 4096M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 4GB, range: 1GB, type WB x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbd9a1 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bd9a1000 0000000000 - 00bd800000 page 2M 00bd800000 - 00bd9a1000 page 4k kernel direct mapping tables up to bd9a1000 @ 86000-8b000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ 8f000-95000 RAMDISK: 3fa42000 - 3ffffeaa ACPI: RSDP 00000000bd86b000 00024 (v02 PTLTD ) ACPI: XSDT 00000000bdff7f18 00074 (v01 DELL M09 06040000 LTP 00000000) ACPI: FACP 00000000bdfe8000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) ACPI: DSDT 00000000bdfe9000 06BFA (v02 Intel CANTIGA 06040000 INTL 20050624) ACPI: FACS 00000000bdf9efc0 00040 ACPI: HPET 00000000bdffed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: MCFG 00000000bdffed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: APIC 00000000bdffed8a 00068 (v01 PTLTD APIC 06040000 LTP 00000000) ACPI: BOOT 00000000bdffedf2 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SLIC 00000000bdffee1a 00176 (v01 DELL M09 06040000 LTP 00000000) ACPI: OSFR 00000000bdffef90 00070 (v01 DELL DELL 06040000 ASL 00000061) ACPI: SSDT 00000000bdfe7000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: SSDT 00000000bdfe6000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) ACPI: SSDT 00000000bdfe5000 0020F (v01 PmRef ApTst 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000140000000 Bootmem setup node 0 0000000000000000-0000000140000000 NODE_DATA [0000000000100000 - 0000000000115fff] bootmap [0000000000116000 - 000000000013dfff] pages 28 (9 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00019adb00] TEXT DATA BSS ==> [0001000000 - 00019adb00] #3 [003fa42000 - 003ffffeaa] RAMDISK ==> [003fa42000 - 003ffffeaa] #4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000] #5 [000008e000 - 000008e900] EFI memmap ==> [000008e000 - 000008e900] #6 [00019ae000 - 00019ae1ac] BRK ==> [00019ae000 - 00019ae1ac] #7 [0000086000 - 0000089000] PGTABLE ==> [0000086000 - 0000089000] #8 [000008f000 - 0000090000] PGTABLE ==> [000008f000 - 0000090000] found SMP MP-table at [ffff8800000f79b0] f79b0 [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 Zone PFN ranges: DMA 0x00000086 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[5] active PFN ranges 0: 0x00000086 -> 0x0000009d 0: 0x00000100 -> 0x000bd568 0: 0x000bd8ec -> 0x000bd951 0: 0x000bd981 -> 0x000bd9a1 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1037572 DMA zone: 55 pages used for memmap DMA zone: 106 pages reserved DMA zone: 3702 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 757285 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009d000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 0000000000100000 PM: Registered nosave memory: 00000000bd568000 - 00000000bd668000 PM: Registered nosave memory: 00000000bd668000 - 00000000bd76c000 PM: Registered nosave memory: 00000000bd76c000 - 00000000bd86c000 PM: Registered nosave memory: 00000000bd86c000 - 00000000bd8ec000 PM: Registered nosave memory: 00000000bd951000 - 00000000bd956000 PM: Registered nosave memory: 00000000bd956000 - 00000000bd981000 PM: Registered nosave memory: 00000000bd9a1000 - 00000000bdaa1000 PM: Registered nosave memory: 00000000bdaa1000 - 00000000bdf63000 PM: Registered nosave memory: 00000000bdf63000 - 00000000bdf9f000 PM: Registered nosave memory: 00000000bdf9f000 - 00000000bdfe4000 PM: Registered nosave memory: 00000000bdfe4000 - 00000000bdfff000 PM: Registered nosave memory: 00000000bdfff000 - 00000000be000000 PM: Registered nosave memory: 00000000be000000 - 0000000100000000 Allocating PCI resources starting at be000000 (gap: be000000:42000000) NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 29 pages at ffff880028022000, static data 90080 bytes Built 1 zonelists in Node order, mobility grouping on. Total pages: 1019547 Policy zone: Normal Kernel command line: BOOT_IMAGE=(hd0,gpt8)/vmlinuz0 root=/dev/sda7 rootfstype=ext4 ro nomodeset add_efi_memmap debug=all PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4010652k/5242880k available (4227k kernel code, 1092592k absent, 139636k reserved, 2926k data, 1324k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:424 Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2260.695 MHz processor. Console: colour EGA 80x25 console [tty0] enabled allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.39 BogoMIPS (lpj=2260695) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Counters: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic counters: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 3 ... counter mask: 0000000700000003 ACPI: Core revision 20090521 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20852 entries in 82 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4521.75 BogoMIPS (lpj=2260879) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (9043.14 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=584 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=776 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=248 bytes sizeof(task_struct)=6008 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 16:36:12 Date: 06/07/10 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 ACPI: EC: non-query interrupt received, switching to interrupt mode PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) DMAR: Forcing write-buffer flush capability pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc504000-0xfc5043ff] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc500000-0xfc503fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc504400-0xfc5047ff] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7] pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7] pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef] pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3] pci 0000:00:1f.2: reg 20 io port: [0x18d0-0x18df] pci 0000:00:1f.2: reg 24 io port: [0x18c0-0x18cf] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] pci 0000:00:1f.5: reg 10 io port: [0x1c48-0x1c4f] pci 0000:00:1f.5: reg 14 io port: [0x18fc-0x18ff] pci 0000:00:1f.5: reg 18 io port: [0x1c40-0x1c47] pci 0000:00:1f.5: reg 1c io port: [0x18f8-0x18fb] pci 0000:00:1f.5: reg 20 io port: [0x1c30-0x1c3f] pci 0000:00:1f.5: reg 24 io port: [0x1c20-0x1c2f] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfc00ffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 32bit mmio: [0xfc010000-0xfc013fff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfc0fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] pci 0000:04:00.0: reg 10 64bit mmio: [0xf8000000-0xf8001fff] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff] pci 0000:00:1c.3: bridge 32bit mmio: [0xfa000000-0xfbffffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff] pci 0000:08:00.0: reg 10 64bit mmio: [0xfc100000-0xfc10ffff] pci 0000:08:00.0: PME# supported from D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:00:1c.5: bridge 32bit mmio: [0xfc100000-0xfc1fffff] pci 0000:09:01.0: reg 10 32bit mmio: [0xfc200000-0xfc2007ff] pci 0000:09:01.0: supports D1 D2 pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:09:01.0: PME# disabled pci 0000:09:01.1: reg 10 32bit mmio: [0xfc200800-0xfc2008ff] pci 0000:09:01.1: supports D1 D2 pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:09:01.1: PME# disabled pci 0000:09:01.2: reg 10 32bit mmio: [0xfc200c00-0xfc200cff] pci 0000:09:01.2: supports D1 D2 pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:09:01.2: PME# disabled pci 0000:09:01.3: reg 10 32bit mmio: [0xfc201000-0xfc2010ff] pci 0000:09:01.3: supports D1 D2 pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:09:01.3: PME# disabled pci 0000:09:01.4: reg 10 32bit mmio: [0xfc201400-0xfc2014ff] pci 0000:09:01.4: supports D1 D2 pci 0000:09:01.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:09:01.4: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfc200000-0xfc2fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved system 00:04: ioport range 0x400-0x47f has been reserved system 00:04: ioport range 0x680-0x69f has been reserved system 00:04: ioport range 0x480-0x48f has been reserved system 00:04: ioport range 0xffff-0xffff has been reserved system 00:04: ioport range 0xffff-0xffff has been reserved system 00:04: ioport range 0x1000-0x107f has been reserved system 00:04: ioport range 0x1180-0x11ff has been reserved system 00:04: ioport range 0x164e-0x164f has been reserved system 00:04: ioport range 0xfe00-0xfe00 has been reserved system 00:04: ioport range 0x900-0x97f has been reserved system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved system 00:09: iomem range 0xe0000000-0xefffffff has been reserved system 00:09: iomem range 0xfeb00000-0xfeb03fff has been reserved system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0xfc000000-0xfc0fffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x3000-0x3fff pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.1: IO window: 0x4000-0x4fff pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.3: IO window: 0x5000-0x5fff pci 0000:00:1c.3: MEM window: 0xfa000000-0xfbffffff pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f5ffffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: 0xfc100000-0xfc1fffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xfc200000-0xfc2fffff pci 0000:00:1e.0: PREFETCH window: disabled alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfc0fffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff] pci_bus 0000:06: resource 0 io: [0x5000-0x5fff] pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff] pci_bus 0000:08: resource 1 mem: [0xfc100000-0xfc1fffff] pci_bus 0000:09: resource 1 mem: [0xfc200000-0xfc2fffff] pci_bus 0000:09: resource 3 io: [0x00-0xffff] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (junk in compressed archive); looks like an initrd Freeing initrd memory: 5879k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1275928574.432:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7844 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 27 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 alloc irq_desc for 28 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X pcieport-driver 0000:00:1c.5: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 decode_hpp: Could not get hotplug parameters. Use defaults acpiphp: Slot [1] registered ACPI: AC Adapter [ADP1] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID0] ACPI: SSDT 00000000bdf1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 00000000bdf18620 00575 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 00000000bdf19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: SSDT 00000000bdf19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (58 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (55 C) thermal LNXTHERM:03: registered as thermal_zone2 ACPI: Thermal Zone [TZ02] (74 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x18f0 ctl 0x18e4 bmdma 0x18d0 irq 19 ata2: SATA max UDMA/133 cmd 0x18e8 ctl 0x18e0 bmdma 0x18d8 irq 19 ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x1c48 ctl 0x18fc bmdma 0x1c30 irq 19 ata4: SATA max UDMA/133 cmd 0x1c40 ctl 0x18f8 bmdma 0x1c38 irq 19 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc504000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ACPI: Battery Slot [BAT0] (battery present) ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected alloc irq_desc for 21 on node 0 alloc kstat_irqs on node 0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: address@hidden cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 14:801:640 rtc_cmos 00:06: setting system clock to 2010-06-07 16:36:15 UTC (1275928575) Initalizing network drop monitor service ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 Clocksource tsc unstable (delta = -108541817 ns) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: Optiarc DVD+/-RW AD-7640S, HD18, max UDMA/100 ata2.00: configured for UDMA/100 ata1.00: ATA-8: WDC WD3200BEVT-75ZCT2, 11.01A11, max UDMA/133 ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-7 11.0 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-7640S HD18 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 usb 1-6: new high speed USB device using ehci_hcd and address 4 sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sd 0:0:0:0: [sda] Attached SCSI disk md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. RAMDISK: Couldn't find valid RAM disk image starting at 0. EXT4-fs (sda7): barriers enabled kjournald2 starting: pid 76, dev sda7:8, commit interval 5 seconds EXT4-fs (sda7): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda7): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 8:7. Freeing unused kernel memory: 1324k freed Write protecting the kernel read-only data: 6344k usb 1-6: New USB device found, idVendor=05ca, idProduct=18a0 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=9 usb 1-6: Product: Integrated Webcam usb 1-6: Manufacturer: Ricoh co. Ltd. usb 1-6: SerialNumber: CN0TX6137248789NAJAE usb 1-6: configuration #1 chosen from 1 choice usb 2-4: new high speed USB device using ehci_hcd and address 2 usb 2-4: New USB device found, idVendor=13fe, idProduct=1a20 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-4: Product: USB DISK Pro usb 2-4: Manufacturer: usb 2-4: SerialNumber: 077108091067 usb 2-4: configuration #1 chosen from 1 choice usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: BCM2046B1 usb 3-1: Manufacturer: Broadcom usb 3-1: configuration #1 chosen from 1 choice hub 3-1:1.0: USB hub found hub 3-1:1.0: 3 ports detected usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: New USB device found, idVendor=08ff, idProduct=2810 usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 5-1: Product: Fingerprint Sensor usb 5-1: configuration #1 chosen from 1 choice usb 3-1.1: new full speed USB device using uhci_hcd and address 3 usb 3-1.1: New USB device found, idVendor=413c, idProduct=8157 usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-1.1: configuration #1 chosen from 1 choice input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input8 generic-usb 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0 usb 3-1.2: new full speed USB device using uhci_hcd and address 4 udev: starting version 151 usb 3-1.2: New USB device found, idVendor=413c, idProduct=8158 usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-1.2: configuration #1 chosen from 1 choice input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input9 generic-usb 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0 usb 3-1.3: new full speed USB device using uhci_hcd and address 5 usb 3-1.3: New USB device found, idVendor=413c, idProduct=8156 usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1.3: Product: Dell Wireless 370 Bluetooth Mini-card usb 3-1.3: Manufacturer: Dell Computer Corp usb 3-1.3: configuration #1 chosen from 1 choice EXT4-fs (sda7): internal journal on sda7:8 Adding 7386132k swap on /dev/sda13. Priority:-1 extents:1 across:7386132k ACPI: EC: input buffer is not empty, aborting transaction