bug#33676: GuixSD on eoma68-a20?

[swedebugia]

On 2018-12-22 00:09, Danny Milosavljevic wrote:
> Now I get:
> 
> $ # commit 39c676c4a3507863f4edf20b225ace4cbf646ed6
> $ ./pre-inst-env guix system disk-image --system=armhf-linux -e
> '(begin (use-modules (gnu system) (gnu bootloader) (gnu bootloader
> u-boot) (gnu system install)) (operating-system (inherit
> installation-os) (bootloader (bootloader-configuration (bootloader
> u-boot-bootloader) (target #f)))))' >QQQ3 2>&1
> [...]
> The following derivation will be built:
>    /gnu/store/shgfclh6yy1a03hl0c293s89y3qm9033-disk-image.drv
> building /gnu/store/shgfclh6yy1a03hl0c293s89y3qm9033-disk-image.drv...
> environment variable `PATH' set to
> `/gnu/store/cm3j1pzdqhw4s9bg1drwlm3lw3qxzddj-qemu-minimal-3.1.0/bin:/gnu/store/hb2qj35yxmvxzcq99lbfcpija032wdzh-coreutils-8.30/bin'
> creating raw image of 1265.54 MiB...
> Formatting '/gnu/store/9wbw2vbpgg3pwlg9xr7jbniyca0nra2q-disk-image',
> fmt=raw size=1327019190
> [    0.000000] Booting Linux on physical CPU 0x0
> [    0.000000] Linux version 4.19.11-gnu (nixbld@) (gcc version 5.5.0
> (GCC)) #1 SMP 1
> [    0.000000] CPU: ARMv7 Processor [412fc0f1] revision 1 (ARMv7), cr=10c5387d
> [    0.000000] CPU: div instructions available: patching division code
> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
> [    0.000000] OF: fdt: Machine model: linux,dummy-virt
> [    0.000000] Memory policy: Data cache writealloc
> [    0.000000] efi: Getting EFI parameters from FDT:
> [    0.000000] efi: UEFI not found.
> [    0.000000] cma: Reserved 16 MiB at 0x4f000000
> [    0.000000] psci: probing for conduit method from DT.
> [    0.000000] psci: PSCIv0.2 detected in firmware.
> [    0.000000] psci: Using standard PSCI v0.2 function IDs
> [    0.000000] psci: Trusted OS migration not required
> [    0.000000] random: get_random_bytes called from
> start_kernel+0xa0/0x50c with crng_init=0
> [    0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s38732 r8192
> d22708 u69632
> [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64960
> [    0.000000] Kernel command line: panic=1
> --load=/gnu/store/ip9p4q62fbgm2r2xnnh8qi5p77k2igas-linux-vm-loader
> console=ttyAMA0
> [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> [    0.000000] Memory: 214952K/262144K available (9216K kernel code,
> 1133K rwdata, 2612K rodata, 2048K init, 310K bss, 30808K reserved,
> 16384K cma-reserved, 0K highmem)
> [    0.000000] Virtual kernel memory layout:
> [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
> [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
> [    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
> [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
> [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
> [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
> [    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
> [    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
> [    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   (1134 kB)
> [    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 311 kB)
> [    0.000000] ftrace: allocating 33359 entries in 98 pages
> [    0.000000] rcu: Hierarchical RCU implementation.
> [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
> [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
> [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> [    0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143]
> [    0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt).
> [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
> max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
> [    0.003589] sched_clock: 56 bits at 62MHz, resolution 16ns, wraps
> every 4398046511096ns
> [    0.006045] Switching to timer-based delay loop, resolution 16ns
> [    0.308537] Console: colour dummy device 80x30
> [    0.365555] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 125.00 BogoMIPS (lpj=250000)
> [    0.373670] pid_max: default: 32768 minimum: 301
> [    0.426475] Security Framework initialized
> [    0.431096] Yama: becoming mindful.
> [    0.506448] AppArmor: AppArmor initialized
> [    0.535772] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
> [    0.543395] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 
> bytes)
> [    0.965208] CPU: Testing write buffer coherency: ok
> [    0.998104] CPU0: Spectre v2: firmware did not set auxiliary
> control register IBE bit, system vulnerable
> [    1.411470] /cpus/address@hidden missing clock-frequency property
> [    1.428729] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [    1.698318] Setting up static identity map for 0x40100000 - 0x401000a0
> [    1.748454] rcu: Hierarchical SRCU implementation.
> [    1.926086] EFI services will not be available.
> [    1.993192] smp: Bringing up secondary CPUs ...
> [    1.994874] smp: Brought up 1 node, 1 CPU
> [    1.997851] SMP: Total of 1 processors activated (125.00 BogoMIPS).
> [    1.998883] CPU: All CPU(s) started in SVC mode.
> [    2.503281] devtmpfs: initialized
> [    3.198070] VFP support v0.3: implementor 41 architecture 4 part 30
> variant f rev 0
> [    3.746420] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 7645041785100000 ns
> [    3.775416] futex hash table entries: 256 (order: 2, 16384 bytes)
> [    4.121161] pinctrl core: initialized pinctrl subsystem
> [    4.513079] DMI not present or invalid.
> [    4.901725] NET: Registered protocol family 16
> [    5.171532] DMA: preallocated 256 KiB pool for atomic coherent allocations
> [    5.247930] audit: initializing netlink subsys (disabled)
> [    5.429698] audit: type=2000 audit(3.640:1): state=initialized
> audit_enabled=0 res=1
> [    5.571864] No ATAGs?
> [    5.603824] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
> watchpoint registers.
> [    5.605465] hw-breakpoint: maximum watchpoint size is 8 bytes.
> [    5.716942] Serial: AMBA PL011 UART driver
> [    6.689400] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 54,
> base_baud = 0) is a PL011 rev1
> [    6.818013] console [ttyAMA0] enabled
> [...]
> [   73.272363] pl061_gpio 9030000.pl061: PL061 GPIO chip @0x09030000 
> registered
> [   73.354536] pci-host-generic 4010000000.pcie: host bridge
> /address@hidden ranges:
> [   73.383612] pci-host-generic 4010000000.pcie:    IO
> 0x3eff0000..0x3effffff -> 0x00000000
> [   73.405201] pci-host-generic 4010000000.pcie:   MEM
> 0x10000000..0x3efeffff -> 0x10000000
> [   73.413035] pci-host-generic 4010000000.pcie:   MEM
> 0x8000000000..0xffffffffff -> 0x8000000000
> [   73.449129] pci-host-generic 4010000000.pcie: can't claim ECAM area
> [mem 0x10000000-0x1fffffff]: address conflict with address@hidden [mem
> 0x10000000-0x3efeffff]
> [   73.511869] pci-host-generic: probe of 4010000000.pcie failed with error 
> -16
> [   74.049180] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [   74.184595] Serial: AMBA driver
> [...]
> [   78.969555] Run /init as init process
> [   80.062608] hrtimer: interrupt took 110418352 ns
> GC Warning: pthread_getattr_np or pthread_attr_getstack failed for main thread
> GC Warning: Couldn't read /proc/stat
> Welcome, this is GNU's early boot Guile.
> Use '--repl' for an initrd REPL.
> 
> loading kernel modules...
> [  135.306635] SCSI subsystem initialized
> [  136.419610] Unable to handle kernel paging request at virtual
> address ea0003ff
> [  136.432562] pgd = (ptrval)
> [  136.434175] [ea0003ff] *pgd=00000000
> [  136.443714] Internal error: Oops: 5 [#1] SMP ARM
> [  136.448388] Modules linked in: libata(+) scsi_mod
> [  136.459458] CPU: 0 PID: 1 Comm: init Not tainted 4.19.11-gnu #1
> [  136.461282] Hardware name: Generic DT based system
> [  136.477596] PC is at ata_attach_transport+0xd8/0x274 [libata]
> [  136.483380] LR is at 0x124
> [  136.484240] pc : [<bf05c190>]    lr : [<00000124>]    psr: 60000013
> [  136.485268] sp : ce0fdcf0  ip : ea0003ff  fp : ce0fdd1c
> [  136.486473] r10: 00000000  r9 : ea00041f  r8 : ea00040f
> [  136.487498] r7 : ce3fc8bc  r6 : ce3fc8dc  r5 : ce3fc8cc  r4 : ce3fc800
> [  136.488614] r3 : ce0ed040  r2 : 00000000  r1 : c10d3b14  r0 : 00000000
> [  136.490476] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment 
> none
> [  136.492057] Control: 10c5387d  Table: 4e34406a  DAC: 00000051
> [  136.494159] Process init (pid: 1, stack limit = 0x(ptrval))
> [  136.495663] Stack: (0xce0fdcf0 to 0xce0fe000)
> [  136.499157] dce0:                                     00000001
> 00000000 bf0778c8 c1005dcc
> [  136.501950] dd00: bf079000 ffffffff bf078000 00000000 ce0fdd9c
> ce0fdd20 bf077c10 bf05c0c4
> [  136.504080] dd20: c0f1e6b0 bf06f140 c1005dcc ce0fdd38 c01ceb30
> bf078000 ce0fdd54 ffffffff
> [  136.506036] dd40: c0155458 c01ceb24 ce0fdd7c ce0fdd58 c01bbaac
> c01553d0 c10067b4 d082000c
> [  136.508122] dd60: ce0fdda8 d0820000 d0821000 f28f9aeb ce0fdda4
> bf06ef40 bf0778c8 c1005dcc
> [  136.510236] dd80: 00000000 bf06ef4c bf06ef40 c1005dcc ce0fde14
> ce0fdda0 c01035d8 bf0778d4
> [  136.512143] dda0: c0101a0c f28f9aeb ce327600 c0979f74 ce000600
> ce000600 ce0fddd4 ce0fddc8
> [  136.514144] ddc0: c0979f74 c01ce7d0 ce0fde14 ce0fddd8 c0308ab4
> c0979f50 ce0fde04 ce0fdde8
> [  136.516233] dde0: c0309c5c c03090e4 00000052 f28f9aeb ce0fdf38
> bf06ef40 ce0fdf38 ce3321c0
> [  136.518293] de00: bf06f070 bf06ef4c ce0fde3c ce0fde18 c01fb75c
> c0103594 ce0fde3c ce0fde28
> [  136.520436] de20: c02f3410 00000000 ce0fdf38 bf06f040 ce0fdf14
> ce0fde40 c01fa210 c01fb6f4
> [  136.522398] de40: ffff8000 00007fff bf06ef40 c01f778c ce0fde98
> d0820000 c1005dcc c0a08334
> [  136.524853] de60: bf06f054 bf06ef44 00000a2c bf071000 014f9cf8
> c0c3d374 ffffffff c0c5b674
> [  136.526866] de80: c0101204 ce0fc000 ce0fdf14 ce0fde98 bf062024
> 00000006 bf062054 000000bf
> [  136.528885] dea0: 00000000 00000000 6e72656b 00006c65 00000000
> 00000000 00000000 00000000
> [  136.531078] dec0: 00000000 00000000 00000000 00000000 00000000
> 00000000 00000000 00000000
> [  136.533045] dee0: 00000000 f28f9aeb 7fffffff c1005dcc 00000000
> 0000000a 014f9cf8 c0101204
> [  136.534976] df00: ce0fc000 0000017b ce0fdfa4 ce0fdf18 c01fa9c4
> c01f84e4 7fffffff 00000000
> [  136.537150] df20: 00000003 ce0fc000 ce0fdf5c d08cf000 00051ca8
> 00000000 d08f06f3 d08fefc0
> [  136.539224] df40: d08cf000 00051ca8 d09201e0 d091ff38 d0909544
> 0002d000 0002f250 00000000
> [  136.541281] df60: 00000000 00000000 0001490c 00000042 00000043
> 0000003c 0000002a 0000001b
> [  136.543248] df80: 00000000 f28f9aeb 00000004 b58dac90 00053e77
> 0000017b 00000000 ce0fdfa8
> [  136.545223] dfa0: c0101000 c01fa8f4 00000004 b58dac90 0000000a
> 014f9cf8 00000000 015bbf78
> [  136.548002] dfc0: 00000004 b58dac90 00053e77 0000017b 002b39d0
> 0029b25c 00161fec 00000002
> [  136.550771] dfe0: bec661d0 bec661c0 0005c7a9 0011d1e2 60000030
> 0000000a 00000000 00000000
> [  136.578059] [<bf05c190>] (ata_attach_transport [libata]) from
> [<bf077c10>] (ata_init+0x348/0x39c [libata])
> [  136.589371] [<bf077c10>] (ata_init [libata]) from [<c01035d8>]
> (do_one_initcall+0x50/0x214)
> [  136.596083] [<c01035d8>] (do_one_initcall) from [<c01fb75c>]
> (do_init_module+0x74/0x224)
> [  136.598342] [<c01fb75c>] (do_init_module) from [<c01fa210>]
> (load_module+0x1d38/0x2228)
> [  136.599851] [<c01fa210>] (load_module) from [<c01fa9c4>]
> (sys_finit_module+0xdc/0x110)
> [  136.601640] [<c01fa9c4>] (sys_finit_module) from [<c0101000>]
> (ret_fast_syscall+0x0/0x54)
> [  136.603227] Exception stack(0xce0fdfa8 to 0xce0fdff0)
> [  136.605053] dfa0:                   00000004 b58dac90 0000000a
> 014f9cf8 00000000 015bbf78
> [  136.607122] dfc0: 00000004 b58dac90 00053e77 0000017b 002b39d0
> 0029b25c 00161fec 00000002
> [  136.608630] dfe0: bec661d0 bec661c0 0005c7a9 0011d1e2
> [  136.616749] Code: e59fc1a0 e3a0ef49 e28c8010 e28c9020 (e89c000f) 
> [  136.631449] ---[ end trace c34b1e9ba28742f3 ]---
> 
> And then it hangs seemingly indefinitely.

I just tried on 

Git checkout:
  repository: /home/sdb/src/guix
  branch: HEAD
  commit: d15211c9b5b46b96c5b658329624942b6ff5c917

and got:

building /gnu/store/ngyvqxnj2yndvncpfrkmpc6irfz6k09q-gmp-6.1.2.drv...
@ unsupported-platform
/gnu/store/ngyvqxnj2yndvncpfrkmpc6irfz6k09q-gmp-6.1.2.drv armhf-linux
while setting up the build environment: a `armhf-linux' is required to
build `/gnu/store/ngyvqxnj2yndvncpfrkmpc6irfz6k09q-gmp-6.1.2.drv', but I
am a `i686-linux'
builder for `/gnu/store/ngyvqxnj2yndvncpfrkmpc6irfz6k09q-gmp-6.1.2.drv'
failed with exit code 1
build of /gnu/store/ngyvqxnj2yndvncpfrkmpc6irfz6k09q-gmp-6.1.2.drv
failed
View build log at
'/var/log/guix/drvs/ng/yvqxnj2yndvncpfrkmpc6irfz6k09q-gmp-6.1.2.drv.bz2'.
substituting
/gnu/store/1aclmh7jy2j5084kdpbcz5xgmdzvjzzj-fontconfig-2.13.1...
cannot build derivation
`/gnu/store/hr975r813adrn92f2g7f14z39086hnbx-coreutils-8.30.drv': 1
dependencies couldn't be built
killing process 2725
cannot build derivation
`/gnu/store/c56fwipfpdpii95420xcwf3vamy3n2pa-python-3.7.0.drv': 1
dependencies couldn't be built
cannot build derivation
`/gnu/store/3v425ipvhz4w2rll3phfzhq5kpaczwg4-python-wrapper-3.7.0.drv':
1 dependencies couldn't be built
guix system: error: build failed: build of
`/gnu/store/3v425ipvhz4w2rll3phfzhq5kpaczwg4-python-wrapper-3.7.0.drv'
failed

-- 
Cheers 
Swedebugia